How to display image in Excel from SAP

I have to download the image from SAP to Excel with data. Is there any way to do it.
Thanks
Vivek

thanks for replies,
i checked that one also but didn't get the solution i tried it shows like http://apex.oracle.com/pls/apex/f?p=52985:2:107570357797788:::::
and my log in credentials are
Workspace name: ajit_personal
user name: ajit
Pass word: ajit
please check once where i am going wrong,
thanks in advance,
Regards,
ajit

Similar Messages

How do I make 3GS email display images, PDFs, Excel, etc?

We have two identical iPhone 3GS and when an email from Outlook is sent to both, one will display images, PDFs, Excel, etc. while the other will not. Both have been updated to the latest software iOS 5.1.1 and Load Remote Images ON. iOS 5.1.1 has been reinstalled on non-performing phone with no improvement. How do I fix this?

Thanks SBerman for the explanation which works on a gmail, yahoo and one of two AOL accounts. In sending the same test message from Outlook to four different email addresses, all but the sending AOL address can view images on the 3GS. The second AOL email account which can open and view files & images is set up identically as the other AOL.Quirky but I can simply not send to that one non-working AOL address. Thanks again for your help.

How to download data in excel from web report in sap ?

how to download data in excel from web report made in sap abap?
through tcode smw0.

for exemple using
MS_EXCEL_OLE_STANDARD_DAT

How to read bytes(image) from a server ?how to display image after read byt

How to read bytes(image) from a server ?how to display image after reading bytes?
i have tried coding tis , but i couldnt get the image to be display:
BufferedInputStream in1=new BufferedInputStream(kkSocket.getInputStream());
int length1;
byte [] data=new byte[1048576];
if((length1=in1.read(data))!=-1){
System.out.println("???");
}System.out.println("length "+length1);
Integer inter=new Integer(length1);
byte d=inter.byteValue();

didn't I tell you about using javax.imageio.ImageIO.read(InputStream) in another thread?

How to display images on my internal isight?

Hi,
I just bought the new iMac 2 gig dual. Running on 10.5.2.
I wanted to know how to display images on my screen during a video conference chat without resorting to holding up a print out to the camera? I need something where I can switch from video mode to image mode and show a single image at a time if I need to. All that while still talking of coarse. If it isn't possible with my iSight software, can you point me to other software I can download and still use my built in cam?
I hope I was clear enough in asking this.
Thanks
Liban

Welcome to Apple Discussions, Liban
iChat can do what you want, but I do not know of any web-based video chat site that can.
Look for Help or Support information on the site you are using or ask the Webmaster if his site has the capability to do what you want.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

How to display image?

Hi all,
How to display image from the database table in the adobe form by using web dynpro abap?
I want to display image in the adobe interactive form by using web dynpro abap.
Please help me.
Regards,
srini

Hi Srini,
If you go through the article you might have seen the following piece of code
*** Send the values back to the node
lo_el_z_if_test_cv->set_static_attributes(
EXPORTING
static_attributes = ls_z_if_test_cv ).
" here ls_z_if_test_cv has the image in XSTRING format which has beeen retrived using METHOD get_bds_graphic_as_bmp of CLASS cl_ssf_xsf_utilities
" In your case you need to just use the select query n fetch it from your table; ( provided your image is store in XSTRING format )
How is your image stored in your database table ?
Regards,
Radhika.

How to display image is in result of query to MS Access database

How can i display image (ole db) from MS Access database?
I tried to do it throw streams but i have a package not a image. Also i trued to save image as a stream of characteristics but the image doesn't create.
thnks

Normally to construct an image in java you need the image data.
If you have stored the image as a OLE object it may include additional data which make it imposible to identify the image data from java side.
You need to find a way extract actual data from the ole object.

How to display images and information

how to display images and information(e.g. like questions) on a jsp page that stored in a database

Look As far as i can see....
Utlimately every file could be expressed as a bytes buffer.
so say if you have a bean called Choice Bean which is expressed as
public class ChoiceBean{
   private String choiceid;
   private String choicedesc;
   private byte image[];
   public void setChoiceId(String choiceid){
          this.choiceid = choiceid;
    public String getChoiceId(){
           return this.choiceid;
      public void setChoiceDesc(String choicedesc){
           this.choicedesc = choicedesc;
       public String getChoiceDesc(){
           return this.choicedesc;
       public void setImage(byte image[]){
              this.image = image;
         public byte[] getImage(){
              return this.image;
}QuestionList.java:
===============
public class QuestionList{
     private List<ChoiceBean> choicelist;
      /*Other member variable declarations*/
       public List<ChoiceBean> getChoiceList(){
                /*Custom code where you may build the list by querying the DA layer*/
                 return this.choicelist;
     public int search(String choiceid){
             int index = -1;
             for(int i =0 ; i < this.choicelist.size() ; i++){
                    ChoiceBean cb = this.choicelist.get(i);
                     if(cb.getChoiceId().equals(choiceid)){
                            index = i;
                            break;
             return index;
    /* Other member method declarations */
}and you are retreving List<ChoiceBean> from DB using your query & have created a session attribute / <jsp:useBean> named ChoiceList
NOTE: sometimes your application server can go out of bounds as you are consuming a lot of memory by creating an arraylist object.
use the following methodology to display images & choices
sample.jsp:
=========
<jsp:useBean id="QuestionList" class="com.qpa.dao.QuestionList" scope="session"/>
<TABLE>
<%
/* QuestionList.getChoiceList() is a method which fetches data from the DB & returns it in form of List<ChoiceBean> */
List<ChoiceBean> choicelist = QuestionList.getChoiceList();
for(int i =0 ; i < choicelist.size() ; i++){
%>
<TR>
<TD><%!=choicelist.get(i).getChoiceId()%></TD>

<TD><IMAGE src="ImageServlet?choiceid=<%!=choicelist.get(i).getChoiceId()%>"/> </TD>
<TD><%!=choicelist.get(i).getChoiceDesc()%></TD>
</TR>
<%
%>
</TABLE>
<%
    session.remove("QuestionList");
%>
NOTE: usage of JSTL or any other custom built tag-libraries makes life more simpler in the following case
ImageServlet.java:
===============
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {
        byte buffer[] = null;
        HttpSession session = request.getSession(false);
        /*getting the QuestionList from the session*/
        QuestionList ql = null;
        String choiceid = new String("");
        try{
             choiceid = request.getParameter("choiceid");
             /*getting the QuestionList from the session*/
            ql = (QuestionList) session.getAttribute("QuestionList");
        } catch(Exception exp){
        if(choiceid.equals("") == false && ql != null ){
            List<ChoiceBean> clist = QuestionList.getChoiceList();
               assuming that you have created a serach method which searches the entire choice list and would give you
               the index of that object which is being refered by unique choiceid and returns -1 if not found
            int index = QuestionList.search(choiceid);
            if(index != -1){
               ChoiceBean cb = clist.get(index);
               buffer = cb.getImage();
        if(buffer != null){
             // assuming that we have stored images in JPEG format only
             JPEGImageDecoder decoder = JPEGCodec.createJPEGDecoder(new ByteArrayInputStream(buffer));
             BufferedImage image =decoder.decodeAsBufferedImage();
             response.setContentType("image/jpeg");
             // Send back image
             ServletOutputStream sos = response.getOutputStream();
             JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(sos);
             encoder.encode(image);
        } else {
           response.setContentType("text/html");
           response.getWriter().println("<b>Image data not found</b>");
}However,i still feel there are few loopholes with this approach where Application Server can eat up a lot of heap space which may result in outofmemorybound exception.
Hope this might help :)
REGARDS,
RaHuL

How to display a new view from a nib ?

how to
display a new view from a nib in the main window after clicking on a button.
When I click a the button named for example "goToGokyo", the link to my procedure
runs correctly because I see my NSLog message "goToGokyo button pressed".
My nib, which name is "GokyoViewController" does exist.
I did as follow for the moment but I'm stuck now, my nib :
- (IBAction)goToGokyo:(id)sender
    NSLog(@"goToGokyo button pressed");
//[self stopSound];
if (gokyoViewController == nil)
        GokyoViewController *aGokyoViewController = [[GokyoViewController alloc]
                                                     initWithNibName:@"GokyoViewController" bundle:nil];
        self.gokyoViewController = aGokyoViewController;
        //[aGokyoViewController release];
    [self GokyoView:gokyoViewController animated:YES completion: nil];
Thanks in advance for your advice.
Cheers

I did that now :
- (IBAction)btnLoadMyViewController:(id)sender
    NSViewController *viewController = [[NSViewController alloc] initWithNibName:@"MyView" bundle:nil];
    NSView *view = [viewController view];
    [_myWindowController.window setContentView:view];
    //view addSubview:view];
    //[self.myView addSubview:view];
Using
"_myWindowController.window setContentView:view];"
or
"[self.myView addSubview:view];"
does not an error but does nothing !
Would you help me one more times please ?
Thanks in advance

How we will pull the data from Sap-Bi to sap-Bpc

Dear Experts,
Thanks for watching this thread.The whole data is available in SAP-BI.
My system environment is SAP-BPC MS7.5.
Now i want to load the data from Sap-Bi to Sap-Bpc ms.For that we need any Interfaces.
How we will pull the data from SAP-BI to BPC-MS for Master data and Transaction Data.
could you please provide me step by step guide.
Please guide me what should i do.
Regards,
Srinivasan.
Edited by: srinivasan.singari on Jul 22, 2011 8:20 AM

Tough Ask..
Because i have done dashboarding thru scritping (Dyanamic fashion tough) ..It is very good ..But when, coming to the one you asked i have the idea how it works but cannot really tell you wich would be better.
Each Route has its own limitations.That really depends on what exaclty your client is looking after..
So if you new to xcelsius and eager to learn ..I suggest you to give a go at all those..May be you can let me know wich is the best one..
1. QAWS,
2. Bex Query --> Crystal Reports --> Live office --> DashBoard.
3. Bex Query --> WebI --> Live Office --> Dashboard..
4. Webservices consuming BI Query,
5. Xcelsius SAP Netwever Connector.
But i suggest as of now use Xcelsius SAP netweaver Connnection...

How to display a oracle table from a java program?

How to display a oracle table from a java program.
Hello friends, I have written a Java program, using oracle 10g as backend.
I want to display a oracle table as output. Im not getting how to display oracle table as a output table.. Pls help me
Thank you

jayanthds, you're not going to get a satisfactory
answer to this here. it's too big a task to justbe
quickly outlined in a forum - the reply "all youneed
to do is to query you table and return it asJTable"
is worthless, for example, since the solution to
any problem can be distilled to such a
soundbite, if need be. doesn't make the solutionany
simpler
essentially you're asking "how do I write adatabase
application?". all you'll get is snippets of code
that, when fitted together, will eventually helpyou
do this, but you'll spend days and days comingback
saying "right, I've done that, now what?" until
either you or the forum gets frustrated with the
whole affair and the process stops
there are entire books written about this subject,
and countless tutorials and guides on theinternet.
you're better off going down that routehehehe.well, it's true! I used to have a manager that would outline the solution to a problem in a few lines of pseudocode, and then firmly believe that the actual solution would be just as brief and simple. shame his pseudocode included such lofty abstractions as "reformat all data"

How to delete G/L account from Sap?

Hello gurus,
Can any one please suggest me the procedure how to delete the gl account from SAP?
Regards
K.srinivasrao

Dear K.srinivasrao
If there are any Transactions posted in GL Account you cannot delete the GL Account unless the balnce of the GL Account
Go to OBR2 and delete the GL Account
In FS00 U can Mark the GL Account for deletion
hope this will help
Regards
CA.Prasad

How can distribute 5 lakhs records from sap R/3 setup tables ?

How can distribute 5 lakhs records from sap R/3 setup tables in to multiple requests in sap BI?

Hello,
what is "lakhs" ?
Please use plain English words on a world wide forum...
Regards,
Olivier

Creating BOM using BDC :How to display no of records from flat file under

Hi,
      How to display no of records from flat file under one (Alternative BOM) vertically.
    When i execute, the records are replacing one by one.
Here my coding:
report ZBOM1
       no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
       matnr(18),
       werks(4),
       stlan(1),
      END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
       idnrk(18),
       MENGE(18),
       MEINS(3),
       postp(1),
      END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
         matnr(18),
         werks(4),
         stlan(1),
         idnrk(18),
         MENGE(18),
         MEINS(3),
         postp(1),
         posnr(4),
      END OF BDCDATA.
data: ibdcdata type standard table of bdcdata WITH HEADER LINE.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
   FILETYPE                       = 'ASC'
   HAS_FIELD_SEPARATOR            = ','
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                     =
HEADER                         =
TABLES
    DATA_TAB                      = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro      using 'SAPLCSDI' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29N-STLAN'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29N-MATNR'
                              'SOFTDRINKS'.
perform bdc_field       using 'RC29N-WERKS'
                              'WIND'.
perform bdc_field       using 'RC29N-STLAN'
                              '1'.
perform bdc_field       using 'RC29N-DATUV'
                              '16.09.2008'.
perform bdc_dynpro      using 'SAPLCSDI' '0110'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RC29K-BMENG'
                              '1'.
perform bdc_field       using 'RC29K-STLST'
                              '1'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-EXSTL'.
perform bdc_dynpro      using 'SAPLCSDI' '0111'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29K-LABOR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLCSDI' '0140'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSTP(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=FCBU'.
perform bdc_field       using 'RC29P-IDNRK(01)'
                              BDCDATA-IDNRK.
perform bdc_field       using 'RC29P-MENGE(01)'
                              BDCDATA-MENGE.
perform bdc_field       using 'RC29P-MEINS(01)'
                              BDCDATA-MEINS.
perform bdc_field       using 'RC29P-POSTP(01)'
                              BDCDATA-POSTP.
perform bdc_dynpro      using 'SAPLCSDI' '0130'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POSNR'.
perform bdc_field       using 'RC29P-POSNR'
                               BDCDATA-POSNR.            "'0010'.
perform bdc_field       using 'RC29P-IDNRK'
                              BDCDATA-IDNRK.             "'15'.
perform bdc_field       using 'RC29P-MENGE'
                              BDCDATA-MENGE.             "'1'.
perform bdc_field       using 'RC29P-MEINS'
                              BDCDATA-MEINS.             "'ml'.
perform bdc_dynpro      using 'SAPLCSDI' '0131'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'BDC_CURSOR'
                              'RC29P-POTX1'.
perform bdc_field       using 'RC29P-SANKA'
                              'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
endloop.
       Start new screen                                              *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO   = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
       Insert field                                                  *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
    CLEAR iBDCDATA.
    iBDCDATA-FNAM = FNAM.
    iBDCDATA-FVAL = FVAL.
    APPEND iBDCDATA .
ENDIF.
ENDFORM.

Hi,
the BDCDATA structure must be fnam, fval,dynbegin,dynpro,program.
You have to declare like this and pass this in your CALL TRANSACTION statement.
Please give some other table name for BDCDATA you declared for and also for IBDCDATA.

How will we send smtp mail from SAP via Exchange

Hi;
We changed SAP OS between Windows and Linux and still 4.6c . Now we use linux OS.
We used smtp mail at SAP via Exchange with 3.party (sendmail,indigomail etc.) But Now I dont know how will we send smtp mail from SAP.
Please help me,
Thanks for answers.
Moderator message: not directly related to ABAP development, please have look in the Netweaver forums, also search for available information on sending emails.
Edited by: Thomas Zloch on Nov 22, 2010 2:39 PM

Hi,
What is the nature of the URL you wish to include in the e-mail ?
Is it fixed or dynamic ?
Cheers
Colin.

How to display image in Excel from SAP

Similar Messages

Maybe you are looking for