How to display more rows in Master-detail form

I am working on APEX3.2.
I have a master-detail form. The detail form always display 15 rows. However, my customer wants the detail display all the rows. I tries to configure the Number of Rows in the report. It doesn't work. How do I do it?
Thanks a lot!

Hi:
To increase number of rows displayed you have to set Number of Rows and pay attention to both Number of Rows (Item) and Maximum Row Count.
After that if didn't work, sign out or close the browser then open it again. Sometimes it keeps the value in current session.
Saad,

Similar Messages

How to access detail-rows in master-detail form?

I have a master-detail form(one to many relationship). The master and detail are in separate blocks. The detail rows are displayed in a tabular form.
I need to access the detail-rows since the database writes for the detail rows will be managed by a procedure.
I have been looking through the documentation and have been unable to find any syntax for iterating through the detail-rows.
Any help is appreciated. Thanks.

go_block(detail)
first_record;
in a loop while not last_record
-- do your stuff
next_record;
end loop;

Populate row of master detail form with selection from LOV?

Hi Guys,
Total noobe, Hope you can help me out with a project I am working on in Oracle Apex 4.1 with 11g XE
I am sure this is a simple enough issue but I just can’t see the solution.
I have a table called ‘STOCK’ this contains all new parts and delivery details.
‘STOCK_ID’ NUMBER PK
‘DELIVERY DATE ‘ DATE
‘PART’ VARCHAR2
‘PART_SN’ VARCHAR2
‘PART_AN’ VARCHAR2
‘INSTALLED’ CHECKBOX
I have a table that list all the current physical locations of hardware for example
ID, Till number, store location etc…
I have an table to list the devices and modification to the hardware in these store locations.
Move Date, Device, Device Serial number, Device Asset Number, Comments
I have a report & form that displays all the current physical locations of hardware and a master detail form linked to this to add devices and modifications to each store location.
I have a LOV setup on the Devices column that is based on a simple select query
SELECT PART from STOCK
ORDER BY 1
This provides me the list of parts in the stock table.
What I need to figure out is how do I get the data from the ‘STOCK’ table when I select a part in the LOV to auto populate ‘DEVICE_SN’ ‘DEVICE_AN’ in my master detail tubular form. this information is contained in the 'PART_SN' & 'PART_AN' columns of the STOCK table.
I also need to figure out how to identify the part because by default the LOV only displays one column and I have no idea which part I am selecting other than by name. i could use a popup LOV and scan a barcode into the search box and get the retuen value to display the part name in the field.
I also would like to reduce the number of records displayed in the LOV by using the ‘INSTALLED’ checkbox i.e. if checked this part has been used and will not be available for selection. The ‘PART_SN’ field can be duplicated as we often get the same part back again as a replacement after repair but this should be valaditated against i.e if the parts is ticked as installed and not available for selection in the list it can be added again this could possibly be validated based on the ‘DELIVERY DATE‘?
I hope this make some sense to you guys if you need any further details let me know.
Cheers
Darren

Hi,
I am from the Oracle Forms background too and I have been using Oracle Apex for a while. Oracle Forms is just like client-server application although it uses the Forms servlet to render its Web front-end. I think...if you're really trying to develop true-Web application, you should try to forget such features as "master with many details" in Oracle Forms. Loading all the details in a single page will cause overheads anyway. When you discover more about ajax and such third-party javascript libraries as jquery and mootools, you'll have a different mind of Web development.
Thanks.
Andy

How to display alternate row colors in struts form?

hi,
I am using struts lib to display data in jsp page.
<logic:iterate id="result" name="listofPorjetcts" indexId = "i">
<tr>
<td ><bean:write name="result" property="projectName"/></td>
</tr>
how to display alternaternate row colors ?
any one can help?

hey i not sure abt structs, what i did for jsp was using a boolean.
declare boolean red=true;
<tr
<%
if(red){%>
class="red" >
<%
red=false;
}else{%>
class="white">
<%
red=true;
%>
take note that the class is a predefined css. I think u can use style="background-color:#red "
You can seearch the web for more info.

How to create Insert & Update on master-detail form JPA/EJB 3.0

Is there any demonstration or tips how to Insert record on master-details form for JPA/EJB 3.0 with ADF binding?

I have master-detail forms (dept-emp). I drag the dept->operations->create method to JSF page. But when I click create button, only dept form is clear and ready for insert. But emp form is not clear. How can I add create method for this?
Can you give some example how to pass the right object to the persist or merge method so that it can save both the two objects (master-detail tables)
Thanks
Edited by: user560557 on Oct 9, 2009 8:58 AM

About having multiple blank rows on master detail form

Can I have multiple blank rows on detail form when I create master detail form?
please help me
shuyue

Let me answer my own question.
Set the number of rows to 500 and it will dynamically set to the number of rows.

Number of Rows on Master - Detail Form

I want to dynamically display the number of detail rows.
I can get the number of rows to be displayed by entering this PL/SQL code before displaying the page:
declare
cnt number;
begin
SELECT count(*) into cnt FROM table WHERE client = "Ford";
end;
How do I tell the 'Number of Detail Rows to Display' field on the 'Options for Detail Row' page to use this value?

Let me answer my own question.
Set the number of rows to 500 and it will dynamically set to the number of rows.

Insert new row to master - detail form using bindingsource

Hi all,
I have a form to analyse price of product, the form include master (textbox:slip ID,datetimepicker : date) and detail(datagridview:slipID,productID,price..)
When I insert new row as below code, all inserted to DB but not show on form, I must close and reopen the form the new row will show, how i must to do to fix it
please help, thanks
Select data when form load
ds = New DataSet
damaster = New SqlDataAdapter("select soPTG,ngaybd,ngaykt,khoa = case when sttesign =0 then 'True' else 'False' end from tbl_PTGMaster", conn)
damaster.Fill(ds, "tbl_ptgMaster")
dadet = New SqlDataAdapter("select [SoPTG],[Mahang],[gianhap],[thuesuat],[laigop],[giacu],[giamoi] from tbl_PTGDetail", conn)
dadet.Fill(ds, "tbl_ptgdetail")
ds.Relations.Add("PTG_rel", ds.Tables("tbl_ptgmaster").Columns("SoPTG"), ds.Tables("tbl_ptgdetail").Columns("SoPTG")).ChildKeyConstraint.UpdateRule = Rule.Cascade
BindingMaster.DataSource = ds
BindingMaster.DataMember = "tbl_ptgmaster"
BindingDetail.DataSource = BindingMaster
BindingDetail.DataMember = "PTG_rel"
gridchitiet.DataMember = "tbl_ptgdetail"
txtptgnumb.DataBindings.Add("text", BindingMaster, "soPTG")
dtstart.DataBindings.Add("Text", BindingMaster, "ngaybd")
dtend.DataBindings.Add("Text", BindingMaster, "ngaykt")
cmdlock.DataBinding.Add("Enabled", BindingMaster, "khoa", True, DataSourceUpdateMode.OnPropertyChanged)
setStatus()
SetHeader()
Dim cmdinsert As New SqlCommand("insert into tbl_PTGMaster(SoPTG,ngaybd,ngaykt) values(@SoPTG,@ngaybd,@ngaykt)", conn)
cmdinsert.Parameters.Add("@soPTG", SqlDbType.Char, 10).Value = txtptgnumb.Text
cmdinsert.Parameters.Add("@ngaybd", SqlDbType.DateTime).Value = dtstart.Value
cmdinsert.Parameters.Add("@ngaykt", SqlDbType.DateTime).Value = dtend.Value
damaster.InsertCommand = cmdinsert
damaster.FillSchema(ds, SchemaType.Source)
cmdinsert = New SqlCommand("insert into tbl_PTGDetail(SoPTG,mahang,gianhap) values(@SoPTG,@mahang,@gianhap)", conn)
cmdinsert.Parameters.Add("@SoPTG", SqlDbType.Char, 10).Value = txtptgnumb.Text
cmdinsert.Parameters("@SoPTG").Direction = ParameterDirection.InputOutput
cmdinsert.Parameters.Add("@mahang", SqlDbType.Char, 10, "mahang")
cmdinsert.Parameters.Add("@gianhap", SqlDbType.Decimal, 8, "gianhap")
dadet.InsertCommand = cmdinsert
dadet.FillSchema(ds, SchemaType.Source)
gridchitiet.FinishEditing()
BindingMaster.EndEdit()
damaster.Update(ds, "tbl_PTGMaster")
ds.Tables("tbl_PTGMaster").AcceptChanges()
BindingDetail.EndEdit()
dadet.Update(ds, "tbl_PTGDetail")
ds.Tables("tbl_PTGDetail").AcceptChanges()
BindingMaster.ResetBindings(False)
BindingDetail.ResetBindings(False)

Hello,
The base idea here is if the record is added successfully you would then get the new primary key then manually add the record to the underlying data source. Does not matter if we are talking a single table or a master-detail setup.
The following shows the basics
https://code.msdn.microsoft.com/Adding-new-records-into-bff5eaaf
All of the above is done without using a DataSet yet the same thing needs to happen with a DataSet, simply focus on the one table.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Add Row in Master Detail Form

Hi all,
I wonder if there is a way to just Add Row in the master detail (tabular) form without actually submitting the page. So if user has updated any existing row before clicking the Add Row button, the update should not be submitted by Add Row button click. If this is possible, then I want to submit (insert) the newly added row as well as any updates made to the existing rows when user click the "apply changes" button.
Any luck?
Thanks for the help.
Milaan

Hi Andy,
Thanks for your response. Here is what I am doing... On submit I am calling another page (popup) for user to enter electronic signature. So when they add row (which is a submit), it calls the electronic signature page popup, and only upon entering the signature (nuisance at this point) it adds a row in the tabular form. Is there a way to change this behavior to not to submit the page every time user click Add row button?
Thnx
Milaan

3 layer master detail form

Hi guys,
Does anyone know how to create a 3 level master detail form with the level 2 and level 3 on the same page.
Thanks
Sam

Not required

Display only current row in master detail

Hi every body greetings. I am facing a problem in master detail. I create a record in master. After i click create button i want only that record to be displayed so that i can edit it to add detail records. Kindly help me? thanx in advance. The problem is i dont know where the record goes since all the other records are also displayed.

Hi Michelle,
Just wondering if you got an answer? I want to do the same exact thing - seems like a simple enough requirement and fairly intuitive flow: I am in my Master-Detail form performing a Create action and I want to add the Detail portion on the same screen rather than hit Create on the Master - then have to go back, Search for that Master record and update it in a separate action by adding the Detail.

More than one Detail table in the Master Detail forms!

Hi,
I need to have more than one Detail table in Master Detail Forms.
I want to see the details of the rows of the first Detail table in the Second Detail table. Please guide me to do this.
Sincerely yours,
Mozhdeh

You can do one of two things
1) Depends on the nature of your data model. I was able to manage many to many
relationships using views and instead of triggers. This solution is somewhat complex but can work in certain situations.
2)Works for situations where master record exists. create a page with mulitple portlets syncronized on some related key.
create the following package to use on the md forms to place on the one page to be rendered.
-- this package will facilitate the storage and retrieval of keys used by the related forms.
create or replace package session_var
IS
session_parms portal30.wwsto_api_session;
g_domain varchar2(2000) := portal30.wwctx_api.get_user;
function get_id (id in varchar2) return number;
PROCEDURE SET_ID
(ID in VARCHAR2
,p_val in VARCHAR2
,P_URL in VARCHAR2
END SESSION_VAR;
create or replace package body session_var
IS
--pkg body
function get_id(id in varchar2) return number is
l_store_session portal30.wwsto_api_session;
l_id number;
begin
l_store_session := portal30.wwsto_api_session.load_session(
p_domain => session_var.g_domain,
p_sub_domain => 'your domain');
l_id := l_store_session.get_attribute_as_varchar2( p_name => id);
return l_id;
end get_id;
PROCEDURE SET_ID
(ID in VARCHAR2
,p_val in VARCHAR2
,P_URL in VARCHAR2
IS
l_store_session portal30.wwsto_api_session;
begin
l_store_session := portal30.wwsto_api_session.load_session(
p_domain => session_var.g_domain,
p_sub_domain => 'your domain');
l_store_session.set_attribute(
p_name => id,
p_value => p_val );
l_store_session.save_session;
* Redirect to the page using p_url;
portal30.wwv_redirect.url(P_URL);
end set_id;
END SESSION_VAR;
--the form master detail form, section before display page enter the following code and publish as portlet.
declare
l_fs varchar2(4000);
l_s varchar2(4000);
v_con_id number;
begin
v_con_id :=rfq.session_var.get_id('CON_ID'); -- primary key and key used to relate details
p_session.set_shadow_value( p_block_name => 'MASTER_BLOCK',
p_attribute_name => 'A_CON_ID', -- attribute on form related to primary key
p_value => '= '|| v_con_id,
p_language => portal30.wwctx_api.get_nls_language ,
p_index => 1
l_fs := p_session.get_value_as_varchar2(p_block_name => 'MASTER_BLOCK', p_attribute_name => '_FORM_STATE');
l_s := p_session.get_value_as_varchar2(p_block_name => 'MASTER_BLOCK', p_attribute_name => '_STATUS');
if l_fs = 'SAVE' and l_s is null then
WWV_MASTER_GENSYS_1(p_block_name => p_block_name,
p_object_name => p_object_name,
p_instance => p_instance,
p_event_type => p_event_type,
p_user_args => p_user_args,
p_session => p_session);
p_session.save_session;
end if;
if l_fs = 'QUERY_AND_SAVE' and l_s is null then
WWV_MASTER_GENSYS_1(p_block_name => p_block_name,
p_object_name => p_object_name,
p_instance => p_instance,
p_event_type => p_event_type,
p_user_args => p_user_args,
p_session => p_session);
p_session.save_session;
end if;
exception
when others then
PORTAL30.wwerr_api_error.add(PORTAL30.wwerr_api_error.DOMAIN_WWV,'app','generic','onLink', p1 => sqlerrm);
raise;
end;
--then create other md forms and publish as portlets in a similar manner.
-- create a form (form_session_vars) to call procedure session_vars and place the following code in the
addiontional pl/sql tab
WWV_GENSYS_1(
p_block_name => p_block_name ,
p_object_name => p_object_name,
p_instance => p_instance ,
p_event_type => p_event_type ,
p_user_args => p_user_args ,
p_session => p_session);
--then create a page and place the md forms created above as portlets on the page.
--create a link and target the form_session_vars and in the link target inputs
enter the values for your user parameters
id= CON_ID --"your primary key name"
p_url= url/page/"your_page"
--finally create a report (QBE or standard).
in the column formation section use the link created earlier to direct the user to the target page.
How it works.
When the link is selected the form_session_Var is called and automatically runs setting the primary key values
in the user session store. The step is required or the resulting page will not render properly. Then the user is redirected to the page where the portlets are rendered. The portlets start rendering, the before display page calls the session vars package to retrieve the key and put the form into query_update mode returning the data.
The portlets finish in query_and_save mode with details in update mode, the allowable insert, delete and none actions will be available for the details.
benefits: The session_Var package code is resuable as well as the form form_session_Var and the link. passing the key name and values are done at the report level and detailed in the report links. the md forms will need to reference their related keys.

Controlling display of details in Master Detail form

Hi
I have a Master Detail form that opens up only in update mode. The master record is display only and only one of the detail fields, "Qty Fulfilled" is editable and the rest are display only. So, the form currently, has a text box only for the Qty fulfilled field.
I set the # of detail rows option to 5. So my form shows a column of 5 boxes, even if there are only 2 detail row.
How do I hide the remaining 3 boxes which have no data in them?
Please help , this is urgent.

btt

Master Detail Form - How 2 update a field in the Detail form using a query?

Hello,
I have a master detail form with, each master record having a fixed(6) number of detail records. One of the fields in the detail record is the PART_DESCRIPTION field. I am trying to update this field by querying Table_X. TABLE_X is in the format of (desciption id, description). Description id runs from 1 to 6.
When the form displays, the PART_DESCRIPTION field for the 6 detail records needs to be automatically populated with the six values of description stored in Table_X. How can this be done?
Tried using session storage objects, but made no headway.
Would greatly appreciate pointers on how to go about doing this.
Thanks.
Dev

If you are on a Portal Version lesser than 3.0.9.8.3, then please try the following to populate
the PART_DESCRIPTION field.
Steps:-
1> Edit the form and go to the Additional PL/SQl section and put the following code in the
"...after displaying the page area" :-
declare
type t_vc_arr is table of varchar2(4000) index by binary_integer;
l_arr_desc t_vc_arr;
l_form_name varchar2(200);
l_form_state varchar2(500);
begin
l_form_name := p_session.get_module().get_name();
l_form_state := p_session.get_value_as_varchar2(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => '_FORM_STATE'
if l_form_state = 'QUERY_AND_SAVE' then
select description
bulk collect into l_arr_desc
from <schema>.table_x;
htp.p('
<script>
var descArr = new Array();
var Fidx = 1;
var formObj = document.WWVM'||p_session.get_id()||';
var fieldName = "'||l_form_name||'.DETAIL_BLOCK.PART_DESCRIPTION.0";
for i in 1..l_arr_desc.count loop
htp.p('descArr['||to_char(i-1)||']="'||l_arr_desc(i)||'";');
end loop;
htp.p('
for (var i=0; i < formObj.length; i++){
if (formObj.elements.name == fieldName+Fidx){
formObj.elements[i].value = descArr[Fidx-1];
++Fidx;
htp.p('</script>');
end if;
end;

Portal Master-detail form how to auto assign detail record sequence number

Portal Master-detail form how to auto assign detail record sequence number.Please help me?

You can just read the following section
Can I specify a sequence number generator as the default value for a form column?
Yes. Enter the following in the "default value" field for the column:
#<schema name>.<sequence name>.nextval
where <schema name> is the name of the schema containing the sequence, and <sequence name> is the name of the sequence. The entry is preceded by a "#".
For example, if the schema name is "SCOTT", and the sequence name is "CUSTOMER_SEQ", the default value entry is:
#SCOTT.CUSTOMER_SEQ.NEXTVAL
same way you can do for master - detail form.
for more information on forms please refer the following URL.
http://otn.oracle.com/products/iportal/htdocs/portal_faq.htm#BuildingApplications
hope it helps.

How to display more rows in Master-detail form

Similar Messages

Maybe you are looking for