How to display top 10 values in a Webi report?

Hi,
I have the following requirement.
If the report contains 'State' and 'Revenue' columns, I need to display top 10 cities with highest revenue and the revenue of the remaining cities can be summed together and should be available in a separate cell.
I tried several formulae to achieve the requirement but was unsuccessful.
I created a variable using the formula: '= If (Rank(<State> ,<Sales revenue>)>10 ) Then Sum(<Sales revenue>) Else 0' and added it as a column in the report. This provides the required results.
When I add this variable as a column in the report, it displays 0 for the first top 10 values and only displays the remaining values. After that we can apply the Sum on this column to get the sum of the remaining (Other) sales revenue excluding top 10 values. However I cannot display this sum in a separate cell.
Please provide some suggestions on this.
Regards,
Aditya Joshi

Hi Aditya,
Could you please try the following solutions to resolve the issue.
Solution1:
In Oracle, there is a function called: RANK() OVER (PARTITION BY () ORDER BY ()) which can be used to define an object at Universe level to return a rank position when used in a report. If you can check with your DBA - there is a similar function available for SQL Server. It should be RANK() OVER (ORDER BY colname) AS () FROM.
Solution2:
Or you can also try returning all rows in query, apply sort at report level & apply alerter to highlight the top 10 values.
Regards,
Sarbhjeet Kaur

Similar Messages

How to Display Current Quarter results in WebI report?

Hi Guys,
I have a requirement where a WebI report should open up on current quarter basis by default. I have checked the refresh on Open in the document properties.What changes or formulae do I need to make/create in order to open the report with current quarter results?
Appreciate any help.
Thanks & Regards,
Anila.

Hi Anila,
Do you mean if a user is running a report on the first quarter, the report should display data for the first quarter only?
If yes, here is the solution:
Create a formula:
CurrQtr = If (Quarter(CurrentDate())) = MyQuarterObject THEN "Show"
Then put a ReportFilter CurrQtr=Show
Regards,
Ashvin

How to display the value of a column in a chart at the top of each column

How to display the value of each column in a chart at the top of each column?

Like this?
Done using chart Inspector.
For details, see Chapter 7, Creating Charts from Numerical Data in the Numbers '09 User Guide. The guide may be downloaded via the Help menu in Numbers.
Regards,
Barry

How to display 7 values of single field in row wise.

hi,
how to display 7 values of single field in row wise.
thankx in advance.

hi ,
do it like this :
1 Place ur UI element in tranparent container with Layout as Row Data and Layout Data as Row Head Data
2 Ur first UI , which contains the first value as Row Head Data ,
3 Others as Row Data
u can do it with Matrix Data as well
if u want to give space , u can use HORIZONTAL GUTTER and set its width to medium / large / Xlarge
also there is a UI element "INVISIBLE ELEMENT" ,
1 u can use this UI element to provide space between ur other UI elements in the view
2 u can insert a text element as well , and in the Text property of the element press ALT + 0160.
u can give the space bw UIs as desired.
regards,
amit

How to display filter values in analyzer

Hi expert,
I want to add filter into analyzer, above data table, I insert a few rows, and add text to hold filters, but after quit from design mode, inserted rows for filters dispear, and its spaces are taken by data table. could you please tell how to display filter values .
Many Thanks,

It is looking like you are saving them as workbooks. It will be possible to maintain fliters if you save with the filters given by workbook properties, not by manual feeding.
let us know with clear expectation if you are not clear with it.

How to display negative values in a screen field of a screen

Hi All,
Please let me know how to display negative values in a screen field of a screen.
thanks

Hi Kishore,
You can do this method. In the screen , create a text field of CHAR instead fo creating an INT4 field.
I have created a field of CHAR of name say TEXT.
In the main program,
declare a variable of the same name ie. TEXT.
data: TEXT(5) TYPE C.
In PBO, just assign the negative values.
It will work.Since there is automatic conversion between character and integer data types, it will work for positive values as well.
Regards,
Sylendra.

How to display a user message on WEBI Home page ?

Hi all,
How to display a user message on WEBI Home page ?
like when ever the data gets scheduled at etl side i want to display a message a message on info view home page "new data is uploading" is this is possible to do ?

Unfortunately this is not possible to do "out of the box". There aren't any pre-configured options that will let you do this. You're only real option is to try and modify the infoview source code yourself to do this.
Regards,
Shawn

How to display username in RTF BI publisher report?

Please advice how to display username in RTF BI publisher report?
May be this can be done via hidden parameter of BIP report which default value will be set up with macro like {$username$} (or smth like)?
Thanks in advance!

Thanks. That worked. I was trying to get it as part of a multi-table query, aliasing dual. But that doesn't work in SQL Plus either so I guess I can't do that.
I was trying
select o.*, d.:xdo_user_name
from oblix_audit_events o, dual d
Before that I was trying
select
:xdo_user_name as USER_ID,
:xdo_user_roles as USER_ROLES,
:xdo_user_report_oracle_lang as REPORT_LANGUAGE,
:xdo_user_report_locale as REPORT_LOCALE,
:xdo_user_ui_oracle_lang as UI_LANGUAGE,
:xdo_user_ui_locale as UI_LOCALE
from dual
but I must have fat fingered something because that works now too. Thanks.
So if I need to do this in it's own query and I'm using an RTF template, how do I make that work?
If I have to do it with it's own

How to display a message in an audit report?

hello all,
i would like to ask how do display a message in an audit report. here is my code...
CALL TRANSACTION tcode USING i_bdcdata
 MODE c_n
 MESSAGES INTO i_error2.
IF sy-subrc EQ 0.
ENDIF.
CLEAR i_error2.
LOOP AT i_error2.
IF i_error2-msgtyp EQ c_e.
 MOVE v_pernr TO i_bdcerror2-pernr.
 MOVE c_infotype TO i_bdcerror2-infty.
 MOVE 'Error' TO i_bdcerror2-msgtype.
 SELECT SINGLE text
 INTO v_msgtxt
 FROM t100
 WHERE sprsl = i_error2-msgspra
 AND arbgb = i_error2-msgid
 AND msgnr = i_error2-msgnr.
 MOVE v_msgtxt TO i_bdcerror2-msgtxt.
 APPEND i_bdcerror2.
ENDIF.
ENDLOOP.
DESCRIBE TABLE i_bdcerror LINES v_bdcerrors.
IF v_bdcerrors <> 0.
SKIP 1.
WRITE: 'BDC Error Report'.
SKIP 1.
WRITE: 'PERNR',
 'INFOTYPE',
 'MESSAGE TYPE',
 'MESSAGE TEXT'.
ULINE.
LOOP AT i_bdcerror.
 WRITE: / i_bdcerror-pernr,
 13 i_bdcerror-infty,
 22 i_bdcerror-msgtype,
 35 i_bdcerror-msgtxt.
ENDLOOP.
ENDIF.
the message text that i was getting contains &1, &2 and so on. how would i be able to replace it with the original value?
thanks!
-ann

After calling the transaction, this is what I do.
a) Call the function module, MESSAGE_TEXT_BUILD and pass the following values from BDCMSGCOLL or the internal table where you collect the messages.
 i) MSGID
ii) MSGNR
iii) MSGV1
iv) MSGV2
 v) MSGV3
vi) MSGV4
There is no need to fetch data using select from table t100.
It builds the message and returns in MESSAGE_TEXT_OUTPUT which can be then displayed to user.
Regards,
Subramanian V.

How achieve "cumulated" key figure in a webi report

Hi all,
In a bex query we can mark "cumulated" in properties of characteristic, then when we run this query our key figures for this characteristic will be cumulated but for rest of characteristics will be non cumulated values. Please how can I get this cumulated valued in a webi report ?? because in spite of mark this flag in our bex query when I run this characteristic in my webi report it doesnt work. Perphaps there is a function in webi or there is a proporty to modify in my universe??
Thanks for your help in advance
Santi

Hi David,
Try using RunningSum(), RunningAverage() etc.. function in Web-I.
Regards,
Rohit

Create Navigation path in IDT4.0 and how to use these navigation paths in Webi report

Hi All, I want to know how to create navigation path in universe? I am using IDT BO4.0 SP4 and relational connection and want to create navigation path. I would like to know how to use this navigation path in Webi report? If I create a webi report where can I see my navigation paths and how to use it. If you can give any document or link which expalins this whole process, that would be great. Thanks,

HI REMI ,
1. ANSWER TO YOUR 1st QUESTION i.e. HOW TO CREATE A NAVIGATIONAL PATH :
    IN IDT 4.0 , YOU WILL FIND A NAVIGATIONAL PATH IN BOTTOM WHEN YOU WILL OPEN YOUR      BUSINESS LAYER , THERE YOU CAN CLICK CUSTOM NAVIGATION PATH -> THEN CLICK AT      ADD A NAVIGATIOAL PATH BUTTON->THEN GIVE NAME NAVIGATIONAL PATH NAME->THEN ADD THE OBJECTS UNDER YOUR NAVIGATIONAL PATH IN A HIERARCHICAL SEQUENCE .     FOR EX :     COUNTRY->STATE->CITY . AND YOUR CUSTOM NAVIGATIONAL PATH IS     CREATED.
2. ANSWER TO YOUR SECOND QUESTION WHAT IS THE USE OF NAVIGATIONAL PATH IN WEBI REPORT :
NAVIGATIONAL PATH HELPS YOU TO PERFORM DRILL DOWN ON YOUR DIMENSION OBJECTS , FOR EX : LET 'S SAY YOU CREATED A NAVIGATIONAL PATH- REGION SALES : Containing COUNTRY->STATE->SALES. THIS WILL HELP YOU TO DRILL DOWN IN YOUR WEBI REPORT AS SHOWN BELOW :
COUNTRY                      SALES
INDIA                             $1000000
(after clicking INDIA you will get below structure in your Report)
STATE                           SALES
DELHI                             $600000
ANDRA-PRADESH          $200000
MAHARASHTRA             $200000
(after clicking MAHARASHTRA you will get below structure in your Report)
CITY                              SALES
MUMBAI                         $150000
NAGPUR                        $ 50000
ACTUALLY , DRILL - DOWN AS THE NAME SOUND HELP TO DRILL THE DIMENSION TILL ROOT LEVEL & SEE THE MEASURES VALUES ASSOCIATED WITH THOSE VALUES LEVELS.
1ST LEVEL WILL ALWAYS CONTAIN THE SUM OF THE MEASURE OBJECTS
CHEERS ,
KAPIL

How to declare top of page in alv report

hi guru
how to declare top of page in alv report
thanks
subhasis

Hi,
check this simple program.
REPORT ZBHALV_LIST.
TABLES:MARA.
SELECT-OPTIONS: MATNR FOR MARA-MATNR.
DATA:BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
ERSDA LIKE MARA-ERSDA,
MTART LIKE MARA-MTART,
MBRSH LIKE MARA-MBRSH,
END OF ITAB.
SELECT * FROM MARA INTO CORRESPONDING FIELDS OF TABLE ITAB WHERE MATNR
IN MATNR.
TYPE-POOLS SLIS.
DATA:FCAT TYPE slis_t_fieldcat_alv.
DATA:LAYOUT TYPE slis_layout_alv.
DATA:EVE TYPE slis_t_event WITH HEADER LINE.
DATA:HEAD TYPE slis_t_listheader WITH HEADER LINE.
DATA:SORT TYPE slis_t_sortinfo_alv WITH HEADER LINE.
SORT-UP = 'X'.
SORT-SPOS = 1.
SORT-FIELDNAME = 'ERSDA'.
SORT-tabname = 'MARA'.
APPEND SORT.
SORT-SPOS = 2.
SORT-FIELDNAME = 'MTART'.
SORT-tabname = 'MARA'.
APPEND SORT.
EVE-NAME = 'TOP_OF_PAGE'.
EVE-FORM = 'TOPOFPAGE'.
APPEND EVE.
EVE-NAME = 'TOP_OF_LIST'.
EVE-FORM = 'TOPOFLIST'.
APPEND EVE.
EVE-NAME = 'END_OF_LIST'.
EVE-FORM = 'ENDOFLIST'.
APPEND EVE.
LAYOUT-ZEBRA = 'X'.
LAYOUT-no_hline = 'X'.
LAYOUT-NO_VLINE = 'X'.
LAYOUT-window_titlebar = 'MATERIAL DETAILS'.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_PROGRAM_NAME = SY-REPID
I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
I_INCLNAME = SY-REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
CT_FIELDCAT = FCAT
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FCAT
IT_SORT = SORT[]
IT_EVENTS = EVE[]
TABLES
T_OUTTAB = ITAB .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM TOPOFPAGE.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
FORM TOPOFLIST.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS-LISTTOP'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
FORM ENDOFLIST.
REFRESH HEAD.
HEAD-TYP = 'H'.
HEAD-INFO = 'MATERIALS-LISTEND'.
APPEND HEAD.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = HEAD[]
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.
Regards,
Priyanka.

How to get the original version of Web report in BW ?

Hello Friends ,
I have transported one Web report from BW development to BW Production System.
But unfortunately , the desired result not me met .
So I have been asked to keep the original version of the Web report.
As the new version of Web report has replaced the previous one ,
So could anybody tell me how to get the original version of Web report in BW ?
Many thanks in advance !!!!!!!!

Hi,
You can use the Transaction STMS choose the option "Import Overview" . In the GOTO tab select "History" and choose "Import History".
Here you can find the history of requests imported to the prod system.
Regards,
K.Manikandan.

How to download data in excel from web report in sap ?

how to download data in excel from web report made in sap abap?
through tcode smw0.

for exemple using
MS_EXCEL_OLE_STANDARD_DAT

How to display F4 values in one field based on other field selection

Hi All,
How to hide a UI element (i.e Link to action) highlited for Normal User and display the same to super user.
Component Name : /SAPSRM/WDC_DODC_SC_GAF_C
2.Can i know how to display the entries in supplier field based on Product category selection.
Right now all the entries are getting displayed in the supplier field.
I want to display only entries based on Product category.
Search Help Name : BBP_BUPA_CLL_PARTNER
Component Name : /SAPSRM/WDC_DODC_SC_I_LIM
How to enhance the web dynpro component with the filtered values.
Regards,
Krish.

Hi Ashvin,
Thanks for the document. In the search help there is a standard FM which is getting executed.
Can i enhance that FM or should i copy and edit.
BBP_F4IF_SHLP_EXIT_CLL_PARTNER
If i creata a Z FM and make changes how to pass that values to my standard Component View UI Element.
If not then suggest me some alternative.
Regards,
Krish

How to display top 10 values in a Webi report?

Similar Messages

Maybe you are looking for