How to display report vertically

Hi.
I want to display a report vertically. I mean heading of the report should come vertical and its records should also come vertical.
I am using alv.
Please help me.

hiiiiiiiiiiiiiiii,
I think, it is not possible in alv. Use list and output text by WRITE operator. Use list and output text by WRITE operator.

Similar Messages

How to display TEXT vertically in SMART FORM

Hai,
I need to display the column name of a table vertically (readable from bottom to top) in smart form.
Could any one please tell me how to do this?
Thanks & Best Regards,
Maniyam Bhaskar.

Hi,
Go through these threads for the discussions happened on similar issue... hope it helps you..
how to print text vertically in smart forms
vertical and horizontal printing in same page with smartforms or sapscript
Good luck
Narin

How to display report in Acroat Reader?

Hi,
i have to display my reports in Acrobat reader. How is it possible to do it from reports? like i'm setting the Distribution property from the report's property palette but it doesn't seem to be working. Does it need any specific parameters to be set?
Best Regards,
Mehwish

Hello,
To display report in Acrobat Reader, you have to execute your reports with DESFORMAT=PDF
On the web (rwcgi60), Acrobat Reader will be called automatically when DESFORMAT=PDF and DESTYPE=CACHE
Regards

How to display Report tile html Title on generated report

Hi
Could you please give some idea to display Report tile <html Title> on generated report?
I am not using CrystalReportViewer to export my report
reportClientDocument = new ReportClientDocument();
reportClientDocument.setReportAppServer(ReportClientDocument.inprocConnectionString);
reportClientDocument.open(reportName, OpenReportOptions._openAsReadOnly);
reportClientDocument.getDatabaseController().setDataSource(
POJOList, Class.forName(CLASSNAME), TABLE_ALIAS, TABLE_ALIAS);
byteArrayInputStream = (ByteArrayInputStream) reportClientDocument
.getPrintOutputController().export(ReportExportFormat.PDF);
Currently its displaying struts action name as title.
We are using crystal reports 2008
Thank you

Try the following extract of code to set the title:
SummaryInfo newSummaryInfo = new SummaryInfo(reportClientDocument.getReportDocument().getSummaryInfo());
newSummaryInfo.setTitle("<new reportName>");
reportClientDocument.modifySummaryInfo(newSummaryInfo);
reportClientDocument.save();
reportClientDocument.close();
I hope this helps.
Regards.
- Robert

How to Display Report Output in X & Y Axis Format based on Date & Site ?

Hi,
I got a requirement to display the output of a Report in X & Y Axis Format like Date in Vertical wise & Site in Horizontal wise.
please suggest me how to do this.

These programs also..
GFW_PROG_BAR : Bar chart example
GFW_PROG_PIE: Pie chart example

How to display report from SQL query string

I am a new user at this forum, my name is Muneer.I have a doubt please help meI am develoing an Institute Management System (Plat form VB.Net 2003), that can add participant details, course details, Account details so and so....my problem is i have a VB.net form ,that form include combo box and flex grid.when i select a text from combobox, data will be display in flexgrid its ok. but i want same out in Report.when i try to make it showing all data please help me asap. how can i pass data to report.I am using ADODB.Connection method with Access Database.waiting ur valuable replyMuneer

This sample passes ado data to a report.
[http://diamond.businessobjects.com/node/2052Â | /node/2052]
Rob Horne
Rob's blog - http://diamond.businessobjects.com/blog/10

How to Display Report conditionally

Hi Friends,
i have create a form with report page. these are two page, Report On pAGE nO-1 amd for Add New Details Form is Page no -2.
On page no -2 i have createD 5 SQL Report .
i want to display these report only when use edit Report On page No 1 and for Edit control move on page no-2,
How can i do this.How can i conditional Display all these report on page no -2 in Case of Edit.
Thanks
Edited by: 805629 on Jan 4, 2011 3:12 AM

Hi,
If you want to show a report only when there is a record on the page that is being edited, you can make the report region conditional on the hidden primary key page item being NOT NULL.
For example, if your page is to edit an EMP record, there would be a hidden P2_EMPNO page item on page 2. This page item will have a value when you are editing an existing record but will be NULL for a new record.
Edit you report region and go to the Condition, in the Condition Type setting, select Value of in Expression 1 is NOT NULL and in the Expression 1 setting enter in the page item name - for example P2_EMPNO
Andy

How to display labels ( vertically) in a column Chart

Hi,
      As per my requirement I want to show labels inside the column charts & they must be aligned verically
say ABC is id i want display i want A
                                                      B
                                                       C
    I have tried with Column Charts properties like showvertically =" true" & extendLabelToEnd="true".But i am not getting them vertically aligned .Is that something else also must be done.
Regards
Kalavati singh
[email protected]

Take a look at this blog: http://gerardnico.com/wiki/dat/obiee/presentation_variable
Try it out by providing a default format.
Thanks,
BIPuser

How to display report server name in oracle reports 9i.

I need to do some validation based on report server name.Pl. suggest.

How do you execute the call for a Report?
URL?

How to display Reports parameter form in Oracle Forms 10g.

hello,
am migrating from Forms 6i applications to Forms 10g.
one of my application contain report, that report display parameter form
I wrote below code for WHEN-BUTTON-PRESSED Trigger
DECLARE
pl_id ParamList;
v_report_id report_object;
v_report varchar2(100);
vjob_id varchar2(100);
vc_rep_status varchar2(100);
BEGIN
pl_id := create_parameter_list('my_list');
add_parameter (pl_id,'P_HOSPITAL_ID',text_PARAMETER,
:bm_hospitals.hospital_id);
add_parameter(pl_id,'PARAMFORM',text_PARAMETER,'NO');
v_report_id := FIND_REPORT_OBJECT('bm_r001');
v_report := RUN_REPORT_OBJECT ( v_report_id,pl_id );
vjob_id := substr ( v_report, length(<reportservername>)+2,
length( v_report) );
vc_rep_status := REPORT_OBJECT_STATUS (v_report);
IF vc_rep_status = 'FINISHED' THEN
 WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id||
'?server=rep_mohahubkpcomp_ORaHOme_IAS'||'&userid=
bedman/bedman@bedman'||'&paramform=yes','_blank');
ELSE
 message ('Report failed with error message '||vc_rep_status);
END IF;
Destroy_Parameter_List(pl_id);
END;
The Above code is running report and displaying Output perfect but cannot
display the Parameter Form at runtime.
any help in this very thankful.
Regards
Gagan.

In Your code there is a line:
add_parameter(pl_id,'PARAMFORM',text_PARAMETER,'NO');
which actually disables the report parameter form.
The line:
WEB.SHOW_DOCUMENT ('/reports/rwservlet/getjobid'|| vjob_id||
'?server=rep_mohahubkpcomp_ORaHOme_IAS'||'&userid=
bedman/bedman@bedman'||'&paramform=yes','_blank');
displays the report to which vjob_id refers. At this point the report is competed so the parameters userid and paramform are useless.
Hope this helps.
Regards
Bekcic Aleksandar

How to display the vertical coloumns(records) in a single row?

Hi all,
I need a requirement in SAP where in the internal table records are in vertical placement as follows:
1 2 3 4 5 | a1 b1 c1 d1 e1
1 2 3 4 5 | a2 b2 c2 d2 e2
1 2 3 4 5 | a3 b3 c3 d3 e3
and so on..........
now as per the requirement I need all the records to be displayed in a single row in the output as follows:
1 2 3 4 5 | a1 b1 c1 d1 e1 | a2 b2 c2 d2 e2 | a3 b3 c3 d3 e3 |.....so on
Any pointers on this would be of great help.
thanks in advance,
Vamsee.

Loop at itab.
at new f1.
write : itab-f1. <--- here don't give '/' .. which will write in new line ...
endif.
write : itab-f2, <--- here don't give '/' .. which will write in new line ...
 itab-f3,
 itab-f4,
 itab-f5,
 itab-f6.
at end of f1.
 write :/ ''.
endat.
endloop.

How to display reports in same portlet when clicked on report links in a menu portlet

Hi,
I am not sure what forum I should ask this question. Anyway, I am trying in this forum.
Let me explain what I trying to do.
I have reports links as menu item links in a menu. I have published this menu to portal and added it to a page. I can now see the report links. If I now click on the report link, it opens the report in a whole window. How do I open the report in the same portlet? Is this possible to open the report in a different portlet at least?
Thanks for your help.

Hi,
This is part of JPDK. You will have to install it. Which version of portal are you using? You can also try this out using
URL portlet which is available with webview in 309.
Thanks,
Sharmila

How to display the results of the grouping horizontally

Hello,
I still cannot understand what am I doing wrong when trying to display the results of the grouping horizontally. Here is the original thread: How to group report vertically
In the Section expert, for Detail section, I check the box Format with Multiple columns. Under the Layout tab, I check Format groups with multiple columns and set the width of the column at 3.3 in. This should give me 3 columns for Landscape orientation.
Now if I select Printing direction Down then Across, I just have the regular vertical grouping.
If I check Across then Down, then I do get 3 columns, but all the records in the Detail section are also spread across first instead of staying in the column.
There should be something else that I should do to get the display like this:
Header1    Header2    Header3
record11   record21   record31
record12   record22   record32
record13   record23   record33
etc.            etc.            etc.
Thank you.

I'm not at all sure columns are gonna help here, as there is no way that I am aware of to tell Crystal to start a new column.
The only way that I can think of to achieve what you are trying to accomplish is to do something like this:
In your group header's Suppress formula, keep track of the first (/ next) three groups that you want to print, using something like (basic syntax):
global grouplist(3) as string
global groupcount as number
groupcount = groupcount + 1
grouplist(groupcount) = {db.GroupingField}
' The NextIsNull below implies End-of-Data...
if groupcount = 3 or NextIsNull({db.GroupField}) then
formula = false ' print the group header
else
formula = true ' suppress the group header
end if
Then, create three formula fields to get each value in grouplist(). The group header format will then show the three formula fields. Underneath these three formula fields, add subreports, which will show the details for one specific group. The subreports should have a parameter for which group's details to show. Use the three formula fields as the link to the three subreports.
In the group footer, clear out the grouplist() array, and set groupcount to zero.
This report will take a while to run, because having three subreports next to each other makes it difficult for Crystal to determine page formatting.
HTH,
Carl

Displaying Report in Web layout

Hello All,
Can anyone please tell me how to display reports in web layout during runtime. I've created a report in month_report.jsp, having both Web Layout & Paper Layouts. At runtime when I call the report the Paper Layout version is getting displayed. Is there any extra parameter I've to pass.
For Example if I give the following address
http://host-110:7778/reports/rwservlet?&report=month_report.jsp&destype=cache&desformat=htmlcss&userid=admin/test@testing&p_month=JANUARY
I get to see the Paper Layout version of the report. What I want is the Web layout. Is there any thing or any setting I've change in the Reports server. Kindly help me out on this.
Regards,
Arun.V

Thanks Frank,
No one seems to giving me a reply in the reports forums. They are hard to come by. Could you please direct me to some post which might be helpfull. I just want to know whether there's something wrong with the way I'm calling the report... May be thats the reason that I'm getting the Paper Layout as output instead of Web Layout.
Regards,
Arun.V

How to display recently viewed pages?

Im looking for advice/tutorial on how to display a vertical
list (<ul>) inside a div which will display say the last few
pages (via their title) which a user has viewed on my site. Just a
simple vertical text based list rather like the list shown on the
"Back" button in IE. Are we talking croutons?
If a user leaves the site then goes back I want the list to
be cleared again.
Ok I know people may say, just use the back button but I
thought it could be a handy feature on the page itself.

Hi freidaf1,
You should take a look at the Tile Tabs add-on:
https://addons.mozilla.org/en-US/firefox/addon/tile-tabs/
I believe it will do exactly what you are looking for. You could always open multiple windows, but I think this is a more elegant solution.
Hopefully this helps!

How to display report vertically

Similar Messages

Maybe you are looking for