How to display Some message in the BEX Explorer

Hi Experts,
We have a scenario where we will check for a condition in the User Exit Variable.
Depending on the condition we need to stop the execution of the query and display some message.
Can any one please help me in explaining me how to display message in the BEX and stop the Query Execution.
Thanks in Advance,
Premkumar

Somenath,
I think from what I gathered in the other posts on SDN about exceptions that it can be used only within a function module and not directly ..
http://help.sap.com//saphelp_470/helpdata/EN/9f/dbaa0635c111d1829f0000e829fbfe/content.htm
Try creating a Z Function module to display the exception but then the exception would stop only your Z Function module and not the user exit from going further..
Arun
P.S some more dope on the same with regard to raising exceptions in programs ( in your case ZXSRU01)
http://help.sap.com/saphelp_nw04/helpdata/en/55/bff20efe8c11d4b54a006094b9456f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/636d2012fc11d5991e00508b5d5211/content.htm
Message was edited by:
Arun Varadarajan

Similar Messages

How to display Success Message on the Left side of Screen

I am displaying a Process Success Message after the ApplyMRU process, *#MRU_COUNT# row(s) updated*. By default, this message is displayed at the center of the screen. I would like to display this message at the left hand side of the screen.
I am using APEX 4.0; Theme Sand - 10. I have tried changing the alignment for the success message position in the Page Template – One Level Tabs, HTML Body section. But I am not having any luck.
Does anyone know how to change/override the default position for the success message?
Thanks

Andy,
I tried what you suggested and the success message is still being displayed in the center of the page.
I went to Template --> Page --> One Level Tabs. In the Header, I put the following lines before the </head>
<style type="text/css">
.t10messages {text-align:left;}
</style>
</head>
<body #ONLOAD#>
#FORM_OPEN#
I do not have any other custom CSS. Just strictly using Theme 10 - Sand
Any ideas on what else could be the reason?
Thanks,
DP
Sorry for the delayed response - out for holidays.

How to display error message on the screen

I am new to WD world and need all possible steps to resolve the following issue.
I need to display the error message on the screen if any required field is empty when user click on SAVE button.
I have set the attribute GO_MESSAGE_MANAGER and check the both box for PUBLIC and REFTO and set the associated type IF_WD_MESSAGE_MANAGER under COMPONENTCONTROLLER.
Under the method of COMPONENTCONTROLLER set the value WD_THIS-GV_NAV_FORBIDDEN = IV_NAV_FORBIDDEN. Which is type IMPORTING of associated type WDY_BOOLEAN.
GV_NAV_FORBIDDEN has been set to attribute WDY_BOOLEAN in the COMPONENTCONTROLLER.
Under the ACTION (on SAVE button) of my default view (VW_DEFAULT) I am doing the following.
IF lv_f_name IS INITIAL
    CALL FUNCTION 'BALW_BAPIRETURN_GET2'
      EXPORTING
        type   = 'E'
        cl     = 'HRRCF0002'
        number = '020'
      IMPORTING
        return = ls_return.
    lv_message = ls_return-message.
NEED TO PUT CODE TO PASS IT ON
ENDIF.

The thing I can not figure out is the input parameter of this call. My CONTEXT has a node1->node2->node3->f_name.
CALL METHOD lo_message_manager->report_attribute_error_message
EXPORTING
    message_text              = lv_message
    element                   = HOW WIILL YOU FIND THE VALUE OF THIS
    attribute_name            =
   params                    =
   msg_user_data             =
   is_permanent              = ABAP_FALSE
   scope_permanent_msg       = CO_MSG_SCOPE_CTXT_ELEMENT
   msg_index                 =
   cancel_navigation         =
   is_validation_independent = ABAP_FALSE     .
wd_comp_controller->set_navigation_forbidden( iv_nav_forbidden = abap_true ).

Help Pls, How to display feedback messages to the user on 10.1.3

Hi, can anybody explain how to use the <html:messages> tag and the SaveMessages( request , ActionMessage ) on an 10.1.3 ADF application?
There is not such a logic on the ToyStore sample and my requests for help on this thread "Internal Error" on saveMessages(...) has been ignored ....
Omar

Chris,
The following thread should give you some insight on how to migrate your 10.1.2 Struts + ADF application to 10.1.3: reportErrors(PageLifecycleContext ctx) not called
If you are not ready to migrate, you can also develop in JDeveloper 10.1.2 and deploy to 10.1.3. The documentation to do so should be available shortly.I will repost when it becomes available.

Validation Event Handler: How to display exception messages in the UI?

During a manual password change I am trying to throw a ValidationFailedException with a message (see code below, which is from the OIM developers guide, but I've added "This is a custom error message"). A general validation error is displayed to the end user, but "This is a custom error message" is not shown.
throws ValidationException, ValidationFailedException {
HashMap<String, Serializable> parameters = orchestration.getParameters();
String password = (parameters.get("usr_password") instanceof ContextAware)
? (String) ((ContextAware) parameters.get("usr_password")).getObjectValue()
: (String) parameters.get("usr_password");
if (password.contains("$")) {
throw new ValidationFailedException("This is a custom error message");
Thanks

During a manual password change I am trying to throw a ValidationFailedException with a message (see code below, which is from the OIM developers guide, but I've added "This is a custom error message"). A general validation error is displayed to the end user, but "This is a custom error message" is not shown.
throws ValidationException, ValidationFailedException {
HashMap<String, Serializable> parameters = orchestration.getParameters();
String password = (parameters.get("usr_password") instanceof ContextAware)
? (String) ((ContextAware) parameters.get("usr_password")).getObjectValue()
: (String) parameters.get("usr_password");
if (password.contains("$")) {
throw new ValidationFailedException("This is a custom error message");
Thanks

How do I display a message in the message area of a report with SALV?

Hi,
How do I display a message at the bottom of the screen of a report (don't know the correct name for the area, but it's the area where error messages normally appear) using the CL_SALV_TABLE object model?
Is there a method in the object model somewhere that will place some text of my choosing in that area for me?
I hope I stated that in an understandable way.
If not, let me know and I'll try again.
Thanks for your help!
Andy

Hi Andrew,
you can issue an error message to be displayed as an error message:
MESSAGE ID .. TYPE 'S' NUMBER .. DISPLAY LIKE 'E'
TYPE 'S' messages are displayed in the status area of the next screen processed, program flow is continued after the message statement. The DISPLAY LIKE 'E' causes the message to be displayed in red color as an error message.
Regards,
Clemens

How to display error message ??

Hi,
I have a BDC program to upload data from an excel sheet. I could see that some records of data fail to pass and hence after my bdc run i would like to display error message for the failed records as follows:
costcenter:
cost element:
fiscal year:
etc etc
is it possible ?? how to do that ? please explain in detail.
for ur reference my program is pasted below.
thanks
*& Report ZBDC_BUDGET_UPLOAD
REPORT ZBDC_BUDGET_UPLOAD.
types: begin of tdata,
         rec(150) type c,
       end of tdata,
       begin of tmtgp,
         costcent LIKE CCSS-KOSTL,
         costelem LIKE CCSS-KSTAR,
         fisyear LIKE CCSS-GJAHR,
         jan(10),
         feb(10),
         mar(10),
         apr(10),
         may(10),
         jun(10),
         jul(10),
         aug(10),
         sep(10),
         oct(10),
         nov(10),
         dec(10),
       end of tmtgp.
data: idata type table of tdata with header line.
data: imtgp type table of tmtgp with header line.
Data : fieldval(10) type c.
selection-screen begin of block b1 with frame title text-001.
parameters: p_file type localfile default 'C:\budget_data_csv.csv'.
selection-screen end of block b1.
include zbdcrecx1.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
        exporting            static    = 'X'
        changing            file_name = p_file.
start-of-selection.
perform upload_data.
loop at imtgp.
Write imtgp-fisyear to fieldval.
perform open_group.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'KPP0B-VALUE(04)'
                              fieldval.
Write imtgp-costcent to fieldval.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'KPP0B-VALUE(06)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(09)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-costelem to fieldval.
perform bdc_field       using 'KPP0B-VALUE(09)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP0' '1000'.
perform bdc_field       using 'BDC_CURSOR'
                              'KPP0B-VALUE(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CSPB'.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-jan to fieldval.
perform bdc_field       using 'Z-BDC03(01)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-feb to fieldval.
perform bdc_field       using 'Z-BDC03(02)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(03)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-mar to fieldval.
perform bdc_field       using 'Z-BDC03(03)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(04)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-apr to fieldval.
perform bdc_field       using 'Z-BDC03(04)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(05)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-may to fieldval.
perform bdc_field       using 'Z-BDC03(05)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(06)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-jun to fieldval.
perform bdc_field       using 'Z-BDC03(06)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(07)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-jul to fieldval.
perform bdc_field       using 'Z-BDC03(07)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(08)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-aug to fieldval.
perform bdc_field       using 'Z-BDC03(08)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(09)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-sep to fieldval.
perform bdc_field       using 'Z-BDC03(09)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(10)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-oct to fieldval.
perform bdc_field       using 'Z-BDC03(10)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(11)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-nov to fieldval.
perform bdc_field       using 'Z-BDC03(11)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(12)'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
Write imtgp-dec to fieldval.
perform bdc_field       using 'Z-BDC03(12)'
                              fieldval.
perform bdc_dynpro      using 'SAPLKPP2' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'Z-BDC03(12)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=CBUC'.
perform bdc_transaction using 'KP06'.
perform close_group.
endloop.
form upload_data.
data: filename type string.
clear idata.
refresh idata.
filename = p_file.
call function 'GUI_UPLOAD'
    exporting            filename        = filename
    filetype        = 'ASC'
    tables            data_tab        = idata
    exceptions            file_open_error = 1
    file_read_error = 2
    no_authority    = 6
    others          = 17.
    check sy-subrc = 0.
    loop at idata.
    clear imtgp.
    split idata at ',' into imtgp-costcent imtgp-costelem imtgp-fisyear
imtgp-jan imtgp-feb imtgp-mar imtgp-apr imtgp-may imtgp-jun imtgp-jul
imtgp-aug imtgp-sep imtgp-oct imtgp-nov imtgp-dec.
    append imtgp.
    endloop.
endform.

check the below code,.,
DATA : t_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
CALL TRANSACTION '<DELIVERYTRANSACTION>' USING t_bdctab
                          mode 'N'
                          MESSAGES INTO t_bdcmsgcoll.
DESCRIBE TABLE t_bdcmsgcoll LINES g_lines.
READ TABLE t_bdcmsgcoll INDEX g_lines.
IF t_bdcmsgcoll-msgtyp = 'S' AND
     t_bdcmsgcoll-msgid = <Msg id> AND
     t_bdcmsgcoll-msgnr = <Msg number>.
* Trap your Call Transaction messages
    t_success-deliverynumber = t_bdcmsgcoll-msgv1.
* You can format the message returned by call transaction using function 'FORMAT_MESSAGE' which will return g_mesg
    t_success-message = g_mesg.
    APPEND t_success.
    CLEAR t_success.
ELSE.
* If there an Error-Do this..
    READ TABLE t_bdcmsgcoll WITH KEY msgtyp = 'E'.
    IF sy-subrc = 0.
* Format your message using FORMAT_MESSAGE "FM
     CLEAR g_mesg.
     t_error-msg   = g_mesg_incl.
     APPEND t_error.
     CLEAR t_error.
   ENDIF.
ENDIF.
* Clear for next run
CLEAR: t_bdcmsgcoll,
         t_bdctab.
REFRESH: t_bdcmsgcoll[],
           t_bdctab[].

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

How To Display Error Message In Self Service Page

Dear All,
I am using 11.5.10 Oracle HRMS self Service ,,,
How can I display error message on the top of the self service page if some action happen ?
Best Regards

Time entry rules maybe?

How to display weicome message in sap logon screen?

Hello experts,
how to display message " welcome to company name" in the sap logon screen.
while typing userid and password in the same screen (right hand side ) , i want to display welcome message.
Pls give me the procedure.
Moderator message: easy to find via google, system administration, not related to ABAP development, please search for available information/documentation before asking.
locked by: Thomas Zloch on Oct 11, 2010 11:44 AM

If you want to give an error message on some processing you can raise the message in the event at selection-screen.
If you want to display information message also ,the same can be done in at selection screen
In case you want to do the processing selectively like only when the execute button is pressed, then you can do the processing based on SY-UCOMM. (value will be 'ONLI' )

How to display a message in an audit report?

hello all,
i would like to ask how do display a message in an audit report. here is my code...
CALL TRANSACTION tcode USING i_bdcdata
                        MODE c_n
                        MESSAGES INTO i_error2.
IF sy-subrc EQ 0.
ENDIF.
CLEAR i_error2.
LOOP AT i_error2.
IF i_error2-msgtyp EQ c_e.
    MOVE v_pernr TO i_bdcerror2-pernr.
    MOVE c_infotype TO i_bdcerror2-infty.
    MOVE 'Error' TO i_bdcerror2-msgtype.
<b>    SELECT SINGLE text
      INTO v_msgtxt
      FROM t100
      WHERE sprsl = i_error2-msgspra
      AND arbgb = i_error2-msgid
      AND msgnr = i_error2-msgnr.
    MOVE v_msgtxt TO i_bdcerror2-msgtxt.</b>
    APPEND i_bdcerror2.
ENDIF.
ENDLOOP.
DESCRIBE TABLE i_bdcerror LINES v_bdcerrors.
IF v_bdcerrors <> 0.
SKIP 1.
WRITE: 'BDC Error Report'.
SKIP 1.
WRITE: 'PERNR',
         'INFOTYPE',
         'MESSAGE TYPE',
         'MESSAGE TEXT'.
ULINE.
LOOP AT i_bdcerror.
    WRITE: / i_bdcerror-pernr,
           13 i_bdcerror-infty,
           22 i_bdcerror-msgtype,
           35 <b>i_bdcerror-msgtxt</b>.
ENDLOOP.
ENDIF.
the message text that i was getting contains &1, &2 and so on. how would i be able to replace it with the original value?
thanks!
-ann

After calling the transaction, this is what I do.
a) Call the function module, <b>MESSAGE_TEXT_BUILD</b> and pass the following values from <b>BDCMSGCOLL</b> or the internal table where you collect the messages.
   i) MSGID
ii) MSGNR
iii) MSGV1
iv) MSGV2
   v) MSGV3
vi) MSGV4
There is no need to fetch data using select from table t100.
It builds the message and returns in MESSAGE_TEXT_OUTPUT which can be then displayed to user.
Regards,
Subramanian V.

How to display a message after button press ?

Hi,
I created a jspx page with a button.
When that button is pressed, a lot of stuff is going to happen in my backing bean.
This can take up to 30 seconds. (soap call etc ... )
Meanwhile, the pressed button stays greyed out. When the action is finished, the button
is available again.
I want to display a message saying the action was succesfull or not, after that button is available again.
Can anyone help me how I can make this ?
Greetz.

Why not opening a popup from your backing bean?
Add a popup to your page:
<af:popup id="yourID" bindings="#{yourBean.popup}">
</af:popup>Open this in your backing bean:
    public void OpenPopup(String popupID) {
      FacesContext facesContext = FacesContext.getCurrentInstance();
      ExtendedRenderKitService service = Service.getRenderKitService(facesContext, ExtendedRenderKitService.class);
      service.addScript(facesContext,"AdfPage.PAGE.findComponent('"+this.getPopup().getClientId(facesContext) + "').show();");
    }This way you can add anything you want in your popup. forms, messages, images,...

How to display error message in Shopping Cart?

How to display error message in Shopping Cart and stop the shopping cart for further processing? I try MESSAGE w001(zshop) or MESSAGE e001(zshop). But it is causing run-time error.

Hi Paul,
In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
Regards,
Noel

How to display success message in function module

Hi Experts,
I am developing new function module regarding URL finder. As per my requirement ,
If USER ID is not provided -display SUCCESS MESSAGE and Provide sy-uname.
how to display success message.if possible can You write the code.
Thanks
raju

Hello,
We can use an exporting parameter like single character field like 'S' for success and 'E' for error instead of a message.
Another option is you can use the Tables parameter and populate Return table with error or success message. Return table of type 'BAPIRET2'.
Hope this might help you!
Regards,
MM Jaffer.

Display error message on the user profile modification page identity system

HI All,
I have created a workflow for chang attribute for email id. I have associated an external action to th workflow id which will check the emailid uniqueness in OID.
When an end user login to OAM user manager and clicks on update my profile, use can see a button with modify request beside email id. when user modifies email id and save the changes, we are able to display email id already exist message in the next page of user profile. but we need to display the message on the same page.
Can any one help us.
Thanks in Advance.

You can do this using java script throwing an alert popup or you can check if the fields are initial in oninputprocessing and fill a variable like gv_error = 'Enter values of mandatory fields.' and display the same in layout using
<phtmlb:messageBar id = "messageBar"
type = "<%= gv_severity_str %>"
text = "error"/>
See this thread for more..
How to display error messages in bsp page
search the forum before posting a new thread....

How to display Some message in the BEX Explorer

Similar Messages

Maybe you are looking for