In sap scripts how to display the driver program

Hi,
I Want to know the sap scripts How to display the output to driver program

Hi,
Go to NACE Transaction.
Select application for ex: if sales V1.
Click on output types.
Select the output type for ex : BA00
Double click on Processing routines.
There you can find the Driver Program name and Script/smart form name.
Reward if useful.
Thanks,
Raju

Similar Messages

In SAP Scripts How to write the fields 90 Degrees to regular format

Hi ,
I am working with SAP Scripts . Sometimes you may want to print text vertically.
I have got a requiremnt in which there we have to write some data which is to be written 90 degres to regular output.
please let me know if there is any printer setting for that .
Regards.
Rohit.

Dear friend,
For printing the text verticaly you need to made a
print controle at printer level.
select a command and in that you have to go in tab general
attribute.
and in front of :Include Printer Control: give the z print controle.
in my company basis people had made one print controle
ZR090.
YOU have to use this command two times between
the text .
first command will move the printer at 90 degree and then
write the text and second will move back to horizental.
I dont know how this ZR090 can be made.
rest wht i have written is very true and currently working.
hope this will solve your problem.
rewards are expected.
Thanks and Regards
vivek kumar srivastava

How to find the driver preogram of a smart form.

Hi experts,
I am developing a smart form for RFQ. There is a standard smartform that SAP has provided for this. But the problem is i dont know how to find the driver program of this smart form. The name of the smart form is /SMB40/MMRFQ_L. it will be of great help if u can reply quickly. Thanks in advance.
regards,
venkat.

1. Go to nace
2. select application as EA
3. click output type button and select output type as NEU
4. double click on processing routines
5. Application - EA
    Output Types - NEU (RFQ)
<b> Smart Form Program - /SMB40/FM06P</b>
    Smart Form               - /SMB40/MMRFQ_L
                                      /SMB40/MMRFQ_A
if u want to directly see without going to nace
1. in se11 give <b>view</b> name as <b>VN_TNAPR</b>
2. execute it
3. it will ask for o/p type and application give it
4. then u can directly go to nace "display view processing routines" screen

SAP Script - how to hide ?

Hi All,
1). I have two pages in se71 in Script program Z_SCRIPT.
I have to hide first page some times and hide second page in some conditions. How to hide the page ?
2). How can I know the driver program name, in a <b>Script editor</b>. Is there any possibility ?
Thanks in advance,

2) Here are differt ways of finding script driver programs
driver program
Finding Driver program for smartforms
Re: How to findout the Driver Program
Regds
Manohar

Script not displayed threw driver program

script is not displayed threw driver program i have only one window n one main window n only text in tahat still its not displayed n gives error " Form zasi_sript4 language EN is not active a
no errors". code is below
*& Report ZASI_SRIPT4P
REPORT ZASI_SRIPT4P.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
   FORM                              = 'zasi_sript4'.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'START_FORM'
EXPORTING
   FORM                   = 'zasi_sript4'.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'E1 '
FUNCTION                       = 'SET'
TYPE                           = 'BODY'
   WINDOW                         = 'MAIN'
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
   ELEMENT                        = 'E2'
FUNCTION                       = 'SET'
TYPE                           = 'BODY'
   WINDOW                         = 'window1'
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CALL FUNCTION 'END_FORM'
IMPORTING
RESULT                         = zasi_sript4p.
EXCEPTIONS
   UNOPENED                       = 1
   BAD_PAGEFORMAT_FOR_PRINT       = 2
   SPOOL_ERROR                    = 3
   CODEPAGE                       = 4
   OTHERS                         = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'
IMPORTING
RESULT                         =
RDI_RESULT                     =
TABLES
OTFDATA                        =
EXCEPTIONS
UNOPENED                       = 1
BAD_PAGEFORMAT_FOR_PRINT       = 2
SEND_ERROR                     = 3
SPOOL_ERROR                    = 4
CODEPAGE                       = 5
OTHERS                         = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hi,
here you no need to write start form and end form
REPORT ZASI_SRIPT4P.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
FORM = 'zasi_sript4'. " change here
IF SY-SUBRC 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'E1 '
* FUNCTION = 'SET'
* TYPE = 'BODY'
WINDOW = 'MAIN'
IF SY-SUBRC 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'E2'
* FUNCTION = 'SET'
* TYPE = 'BODY'
WINDOW = 'window1' "is this same window or different window? if same window ,give name as 'MAIN'
IF SY-SUBRC 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'
* IMPORTING
* RESULT =
* RDI_RESULT =
** TABLES
** OTFDATA =
** EXCEPTIONS
* UNOPENED = 1
* BAD_PAGEFORMAT_FOR_PRINT = 2
* SEND_ERROR = 3
* SPOOL_ERROR = 4
* CODEPAGE = 5
* OTHERS = 6
IF SY-SUBRC 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
with regards
Naresh

How to find out driver program of a sapscript/smartform?

hi,
if the form and print program are not configured through nace then how to find the driver program of a form ie in which table form name and print program are stored?
i have seen that if config is not don ethru nace then we will find no entry in table tnapr....
Please help...

Hi Swetha,
May I know the reason y u need to create print program and form WITHOUT doing any configuration in NACE ??? DO u mean that, the FORM which u have created is not related to any MODULE ? SAP is truly for BUSINESS purpose NOT for any other purpose. Every form which is created is related to some MODULE without which there is no use of creating it, of course it can be helpful for Testing purpose.
Hope ur Q is answered.
Thanks & Regards,
V.Raghavender.

How to display the page no in script

HI,
Can any one tell how to display the page no's as follows in Scripts.
current page/total no.of pages(ex:1/10)

Hi,
For Smartforms:
Just insert fields: &SFSY-PAGE& and &SFSY-FORMPAGES&.
Page: &SFSY-PAGE& of &SFSY-FORMPAGES&
For Sapscript:
Just add: &PAGE& and &SAPSCRIPT-FORMPAGES&
Page: &PAGE& of &SAPSCRIPT-FORMPAGES&
Regards,
Edited by: Jatra Riwayanto on Jun 4, 2008 9:33 AM
Edited by: Jatra Riwayanto on Jun 4, 2008 9:34 AM

How to find the print program for a sap script

Hey Experts,
How to find the print program for a sap script (espicially when it is a custom script(Z*))?
Thanks a ton,

Thanx Vijay,
Actually when I searched for the program in both the tables it didnt show up ther.
But when I did check in the texts of script, I found it.
Good job.
Thanks all.
Vijay, a small doubt.
But why didn't it show up in those 2 tables when all the print programs for standard scripts show up usually?
thnx once again.
Message was edited by: dev a

In SAP Script how to hard code my Company address in footer window

Hi All ,
In SAP Script how to hard code my Company address in footer window .
Ex : in YB_F140_ACC_STAT this script i want to keep my company address, i want to hard coad , i dont want to use any field from table.
Please give me step by step.
Thanks
Sridhar

Hi,
You can make use of standard text...
create a standard text in SO10 with your company address
and in the footer window of your script.. use include text and provide the name of the standard text you created in SO10.
In the text editor... goto insert > text> standard
You get popup give the name of the text name id and language
regards
padma

HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS

HI,
   HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS?

in ur script main window
/: IF &TTXSY-PAGE& = 15.
ur text or standard text
/: ENDIF.
use this.
hope it helps if any issues revert back

How to display the proxy settings for a specific group of servers in an OU ?

Hi,
Can anyone here please assist me in how to display the value of Proxy server settings from the computers in a specific OU member ?
$Computers = Get-ADComputer -Filter * -SearchBase "OU=Terminal Servers,OU=Servers,DC=domain,DC=com" | Where-Object { Test-Connection $_.Name -Count 1 -Quiet }
ForEach ($Computer in $Computers) {
| Export-csv "C:\Proxy-Setting-Results.csv" -Append -NoTypeInformation -UseCulture
I've done similar script for some other task but not sure how to do this for Proxy setting.
Thanks.
/* Server Support Specialist */

Proxy settings are not set in Active Directory
The below code works for 2003 servers and Win XP
$colItems = get-wmiobject -class "Win32_Proxy" -namespace "root\CIMV2" `
-computername $env:computername
foreach ($objItem in $colItems) {
write-host "Caption: " $objItem.Caption
write-host "Description: " $objItem.Description
write-host "Proxy Port Number: " $objItem.ProxyPortNumber
write-host "Proxy Server: " $objItem.ProxyServer
write-host "Server Name: " $objItem.ServerName
write-host "Setting ID: " $objItem.SettingID
write-host
You can try checking the registry values- Works in 2008 + and Windows 7
Get-Item 'HKCU:\Software\Microsoft\Windows\CurrentVersion\Internet Settings'
or use netsh
netsh winhttp show proxy -r <remotemachinename>
Regards Chen V [MCTS SharePoint 2010]

Sap script '' how to create table frame in sap script"""

i have some problem in sap script'' how to create table frame in sap script"""

Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar.

How to display the eror message in the iView

Hi
I want to check the user input in the client side and display an error message in the iView instead of displaying the error message as an alert
it is ok when I tried to do it as an alert
alert('ERROR MESSAGE');
but the problem is how to display the error message as a text in the iView ...
I wrote the below code..
any one can see it and has any sugestion?
Thanks
=============
<%@ taglib uri="tagLib" prefix="hbj" %>
<%
String compid = "";
String message = "";
%>
<hbj:content id="MyContent">
<hbj:page title = "Selection Screen">
<hbj:form id = "myForm">
<br>
<br>
<br>
<center>
<H3>Benefits Statement </H3>
<H4>Selection Screen</H4>
<hbj:gridLayout
id="FSSLayout"
debugMode="False"
width="40%"
cellSpacing="5"
>
<hbj:gridLayoutCell
rowIndex="1"
columnIndex="1"
width="10%"
horizontalAlignment="LEFT"
style="WildStyle"
>
<hbj:label
id="label_inputPernr"
required="TRUE"
text="Personal Number:"
design="LABEL"
labelFor="inputPernr"
/>
</hbj:gridLayoutCell>
<hbj:gridLayoutCell
rowIndex="1"
columnIndex="2"
width="40%"
horizontalAlignment="LEFT"
>
<hbj:inputField id = "inputPernr"
>
<%
compid=MyContent.getParamIdForComponent(inputPernr);
%>
</hbj:inputField>
</hbj:gridLayoutCell>
<hbj:gridLayoutCell
rowIndex="10"
columnIndex="1"
width="40%"
horizontalAlignment="CENTER"
colSpan="2"
>
<hbj:button id = "myButton" text="Submit.." design="EMPHASIZED"
tooltip="Click me to submit this form" onClick="ClickEvent" onClientClick="validRequired()">
</hbj:button>
</hbj:gridLayoutCell>
</hbj:gridLayout>
</center>
<p font="Arial" size=20><%= message%></p>
</hbj:form>
<SCRIPT LANGUAGE="Javascript">
function validRequired()
var myvar = document.getElementById('<%=compid%>').value;
var ivID='<%=componentRequest.getComponentContext().getContextName()%>';
if (myvar = " ")
message = "Enter Employee Number";
ivuRefresh(ivID);
htmlbevent.cancelSubmit=true;
</SCRIPT>
</hbj:page>
</hbj:content>

No problem, here is an example of some html code and javascript that you can adapt to your needs. You can display this standalone to see how it works.
I hope this helps
<html>
     <head>
          <script language="JavaScript">
               function validateForm(){
                    if(document.getElementById("nameField").value == "")
                         document.getElementById("errormessage").innerHTML = "Please enter the Name";
                    else if(document.getElementById("ageField").value == "")
                         document.getElementById("errormessage").innerHTML = "Please enter the Age";
                    else if(document.getElementById("idField").value == "")
                         document.getElementById("errormessage").innerHTML = "Please enter the id";
                    else
                         document.getElementById("errormessage").innerHTML = "";
          </script>
     </head>
     <body>
          <table border="0" cellpadding="0" cellspacing="0">
               <tr>
                 <td>Name</td>
                 <td><input type="input" id="nameField" name="nameField"></td>
               </tr>
               <tr>
                 <td>Age</td>
                 <td><input type="input" id="ageField" name="ageField"></td>
               </tr>
               <tr>
                 <td>Id</td>
                 <td><input type="input" id="idField" name="idField"></td>
               </tr>
               <tr><td><font color="red"><span id="errormessage"></span></font></td></tr>
               <tr><td><input type="button" name="validate" onClick="validateForm()" value="Click to validate"/></td></tr>
          </table>
     </body>
</html>

How to display the variable content in message?

Hi anybody
please let me know How to display the variable content in message?
please send few lines of sample code to understand that
thanks in advance

Hi,
Check out the link
http://help.sap.com/saphelp_nw70/helpdata/en/2c/840b42202cce6ce10000000a155106/content.htm
REPORT Y9020027 LINE-SIZE 130.    "Release 3.1G, 4.5A
BREAK-POINT.
MOVE: 'TESTREPORT for    "ASSIGN FFeld+o(l) TO "        '
        TO SY-TITLE.
      Declaration of variables    **********************
FIELD-SYMBOLS <FS1>.
DATA: FFELD8(8)   TYPE F VALUE '1022333'.   "Unusual: Explicit 8 bytes
*DATA: ZFELD1(2)    TYPE N.            "Here slack bytes are (DW border)
                                     "necessary
              "If you like computing error, please uncomment the above
DATA: FFELDX(8)   TYPE F VALUE '7777777'.
DATA: FFELDA(8)   TYPE F VALUE '7333213'.
DATA: NFELDX(400) TYPE N.
DATA: OFFX(4) TYPE I VALUE 160.
DATA: LENX(4) TYPE I VALUE 8.
              Main Section             *******************
    SKIP.
    WRITE: /5 'Example 1   **** inadmissible ASSIGN ***' COLOR 6.
    WRITE: /10 'Inadmissible ASSIGN: ''ASSIGN FFELD4+1(3) TO <FS1>'' '.
ASSIGN FFELD4+1(3) TO <FS1>.
    ULINE.
    SKIP 2.
    SKIP.
ASSIGN FFELD8+8(8) TO <FS1>.     "<-- Assigning of variable FFELDX !!
    BREAK-POINT.
    WRITE: / 'ASSIGN command with FFELD8, but FFELDX will be assigned'
              COLOR 3.
    WRITE: /5 'Example 2'.
    PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
    WRITE: /10 'Content of   FFELDX      :', FFELDX.
    ULINE. SKIP 2.
    SKIP.
ASSIGN FFELD8+16(8) TO <FS1>.    "<-- Assiging a few FFELDA to <FS1>
    BREAK-POINT.
    WRITE: / 'ASSIGN with FFELD8, but instead FFELDA is assigned'
              COLOR 3.
    WRITE: /5 'Example 3'.
    WRITE: /10 'Content of   FFELDA      :', FFELDA.
    PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
    WRITE: /10 'Content of   FFELDA      :', FFELDA.
    ULINE. SKIP 2.
BREAK-POINT.
   DO 4 TIMES.
     ASSIGN FFELD8+OFFX(LENX) TO <FS1>.     "Zuordnung auf OFFX zu <FS1>
        WRITE: / 'ASSIGN command with FFELD8, es wird NFELDX zugeordnet'
                  COLOR 5.
         WRITE: /5 'Example 4', 'DO-Schleife Nr.:', SY-INDEX.
         PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
         WRITE: /10 'Content of NFELDX145(40) :', NFELDX145(40).
         ULINE. SKIP 2.
         ADD 8 TO OFFX.
   ENDDO.
               Subroutines             *******************
           Display of data fields and field symbols                  *
FORM DISPLAY-FFELD USING FFELD FNAME.
WRITE: /10 'Content of', FNAME, ':', FFELD.
PERFORM FELDEIGENSCHAFTEN USING FFELD.
WRITE: /10 'Content of <FS1> :', <FS1>.
PERFORM FELDEIGENSCHAFTEN USING <FS1>.
ADD   111    TO <FS1>.               "<-- Das Feldsybmol wird verwendet
WRITE: /10 'ADD 111 TO <FS1>'.
ULINE.
WRITE: /10 'Content of', FNAME, 35 ':', FFELD.
WRITE: /10 'Content of <FS1>', 35 ':', <FS1>.
ENDFORM.
   Determination of field properties (only for information)          *
FORM FELDEIGENSCHAFTEN USING ALLG.
DATA: FLAENGE(2) TYPE N.
DATA: FTYP(1) TYPE C.
DATA: FOUT(2) TYPE N.
DATA: FDEZ(2) TYPE N.
ULINE.
DESCRIBE FIELD ALLG LENGTH FLAENGE.
WRITE: /10 'Field length :', FLAENGE.
DESCRIBE FIELD ALLG TYPE FTYP.
WRITE: /10 'Field type    :', FTYP.
DESCRIBE FIELD ALLG OUTPUT-LENGTH FOUT.
WRITE: /10 'Output length :', FOUT.
DESCRIBE FIELD ALLG DECIMALS FDEZ.
WRITE: /10 'Decimals      :', FDEZ.
SKIP 1.
ENDFORM.
END OF PROGRAM *************************************

How to display the Form output in multiple languages ? ------ Urgent

How to display the Form output in multiple languages ? -
Urgent

Hi,
Do u mean the Form output in 2-3 languages ...like form output will be having english russian etc...
for the above case , what u have to do ...
first have to get the transalations for all the fields
say for example : if the english word is PO Number , then u have to get the transalation text for PO Number :
after this , what u have to is ,,, Log on to SAP with russian language , then in the form o/p u have to paste that russian test ( translation text ) ...
do like this for all the components in the form .
Reward Points if it is Useful.
Thanks,
Manjunath MS

In sap scripts how to display the driver program

Similar Messages

Maybe you are looking for