How to display the bw-variables in webi Filter

Hi,everyone,
When I set default values ( ex. last month ) to BW-variables in the BW enhanmance, this default valuse can not display in webi. I use the routing: BW-QUERY --> Universe --> webi. So I hope to display the BW-variable in the Webi filter, with which ,I can set the default values . Could you help me?

Thanks for your help again. I create the universe after had coded the enhanmance of BW variables. The engine type universe connection is SAP Business Warehouse.
So I can see the variables when run the webi query or run the webi but not showing the default value. But the default value effect if I do not set value in prompt.

Similar Messages

How to display the variable content in message?

Hi anybody
please let me know How to display the variable content in message?
please send few lines of sample code to understand that
thanks in advance

Hi,
Check out the link
http://help.sap.com/saphelp_nw70/helpdata/en/2c/840b42202cce6ce10000000a155106/content.htm
REPORT Y9020027 LINE-SIZE 130.    "Release 3.1G, 4.5A
BREAK-POINT.
MOVE: 'TESTREPORT for    "ASSIGN FFeld+o(l) TO "        '
        TO SY-TITLE.
      Declaration of variables    **********************
FIELD-SYMBOLS <FS1>.
DATA: FFELD8(8)   TYPE F VALUE '1022333'.   "Unusual: Explicit 8 bytes
*DATA: ZFELD1(2)    TYPE N.            "Here slack bytes are (DW border)
                                     "necessary
              "If you like computing error, please uncomment the above
DATA: FFELDX(8)   TYPE F VALUE '7777777'.
DATA: FFELDA(8)   TYPE F VALUE '7333213'.
DATA: NFELDX(400) TYPE N.
DATA: OFFX(4) TYPE I VALUE 160.
DATA: LENX(4) TYPE I VALUE 8.
              Main Section             *******************
    SKIP.
    WRITE: /5 'Example 1   **** inadmissible ASSIGN ***' COLOR 6.
    WRITE: /10 'Inadmissible ASSIGN: ''ASSIGN FFELD4+1(3) TO <FS1>'' '.
ASSIGN FFELD4+1(3) TO <FS1>.
    ULINE.
    SKIP 2.
    SKIP.
ASSIGN FFELD8+8(8) TO <FS1>.     "<-- Assigning of variable FFELDX !!
    BREAK-POINT.
    WRITE: / 'ASSIGN command with FFELD8, but FFELDX will be assigned'
              COLOR 3.
    WRITE: /5 'Example 2'.
    PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
    WRITE: /10 'Content of   FFELDX      :', FFELDX.
    ULINE. SKIP 2.
    SKIP.
ASSIGN FFELD8+16(8) TO <FS1>.    "<-- Assiging a few FFELDA to <FS1>
    BREAK-POINT.
    WRITE: / 'ASSIGN with FFELD8, but instead FFELDA is assigned'
              COLOR 3.
    WRITE: /5 'Example 3'.
    WRITE: /10 'Content of   FFELDA      :', FFELDA.
    PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
    WRITE: /10 'Content of   FFELDA      :', FFELDA.
    ULINE. SKIP 2.
BREAK-POINT.
   DO 4 TIMES.
     ASSIGN FFELD8+OFFX(LENX) TO <FS1>.     "Zuordnung auf OFFX zu <FS1>
        WRITE: / 'ASSIGN command with FFELD8, es wird NFELDX zugeordnet'
                  COLOR 5.
         WRITE: /5 'Example 4', 'DO-Schleife Nr.:', SY-INDEX.
         PERFORM DISPLAY-FFELD USING FFELD8 'FFELD8'.
         WRITE: /10 'Content of NFELDX145(40) :', NFELDX145(40).
         ULINE. SKIP 2.
         ADD 8 TO OFFX.
   ENDDO.
               Subroutines             *******************
           Display of data fields and field symbols                  *
FORM DISPLAY-FFELD USING FFELD FNAME.
WRITE: /10 'Content of', FNAME, ':', FFELD.
PERFORM FELDEIGENSCHAFTEN USING FFELD.
WRITE: /10 'Content of <FS1> :', <FS1>.
PERFORM FELDEIGENSCHAFTEN USING <FS1>.
ADD   111    TO <FS1>.               "<-- Das Feldsybmol wird verwendet
WRITE: /10 'ADD 111 TO <FS1>'.
ULINE.
WRITE: /10 'Content of', FNAME, 35 ':', FFELD.
WRITE: /10 'Content of <FS1>', 35 ':', <FS1>.
ENDFORM.
   Determination of field properties (only for information)          *
FORM FELDEIGENSCHAFTEN USING ALLG.
DATA: FLAENGE(2) TYPE N.
DATA: FTYP(1) TYPE C.
DATA: FOUT(2) TYPE N.
DATA: FDEZ(2) TYPE N.
ULINE.
DESCRIBE FIELD ALLG LENGTH FLAENGE.
WRITE: /10 'Field length :', FLAENGE.
DESCRIBE FIELD ALLG TYPE FTYP.
WRITE: /10 'Field type    :', FTYP.
DESCRIBE FIELD ALLG OUTPUT-LENGTH FOUT.
WRITE: /10 'Output length :', FOUT.
DESCRIBE FIELD ALLG DECIMALS FDEZ.
WRITE: /10 'Decimals      :', FDEZ.
SKIP 1.
ENDFORM.
END OF PROGRAM *************************************

How to display the data of CJ2C(T-CODE) using web dynpro abap

Hi all:
    How to display the data of CJ2C(T-CODE) using web dynpro abap.
    CJ2C used to display a Gantt Chart.
    Thanks.

Hi,
Create a Value attribute (resource) of type Resource, bind it with the property of File Upload UI element.
On action place the code and Deploy the application
byte[] bytes = new byte[ 1024];
FileOutputStream out = new FileOutputStream( new File( <path in server>));
InputStream in = resource.read( true);
int len;
while( ( len = in.read( bytes)) > 0)
     out.write( bytes, 0, len);
in.close();
out.close();
Regards
     Vinod V

How to combine the same variables from 2 queries in one webi report

HI ALL,
I created two BW queries/universe and put them into one web intelligence report. Both queries have the same mandatory variable. I combined the relevant dimensions but can't find how to combine the two variables, which resulted in pop-up for 2 variables.
Any idea?

Hey Dick Zheng,
Just to close it,
Instead of working on existing reports.
Create new report(s) on top of these changed Universes(2).
1. New WebI report on top of Univ1 (With Prompt)
2. New WebI report on top of Univ2 (Without Prompt)
If both are working as expected. Do follow below:
1. Open any Report (just created in above steps)
2. Edit Query
3. Add Query
4. Select another Universe
5. Drag few objects
6. Run Queries
Now see it is working as expected or not.??
Still any issues post here...,,
Gracias...!!

How can i display the presentation variable in my reports

Was facing a problem to display the Presentation variable on my report, however i managed to display it on answers, but when i try to display it on my Publisher report it doesnt shows any data.
I use to Select the Values From my prompt, and it shows the Reflection of Presentation Variable on my Answers Report. but i cannot see the Reflection of data on my Publisher Report Please any One Can help me with this.

Removing '' does not work it given the following error
"State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 27002] Near <@>: Syntax error [nQSError: 26012] . (HY000)"
and by adding space you mean that I use it as '@{ BbranchCode}'?
What I am doing at the moment is
1. Write the given query in oracle BI Answers.
2. Made a dashboard prompt in Answers.
3. Made a report in dashboard using the Answers report and the dashboard prompt.
Up till this step it works perfectly fine and the data displayed in manipulated on the basis of the values selected in the prompt.
4. Now what I want is to display this report in Dashboards using oracle BI publisher. For that I use the template builder provided for microsoft word.
5. I login to that add-on, open the answers report where I can see the field in the rowset. I select that field and save the template.
6. I open the oracle BI publisher and make a new reprt with data model of the answer's report and Layout of the one I just created.
7. I open the dashboard and put in the BI publisher report in the same page in which the asnwers report and the prompt was.
8. Upon changing the values of the prompt the report in the answers is still getting manipulated but I am not able to see its reflection of the BI publisher report.
The thing is that I am currently using this presentation variable to manipulate my reports in dashbords using dashboard prompts. The report is built in oracle BI Answers and it is working perfectly fine with it. Now when I use the template builder for Microsoft Word and open the template with the answers's report of this query I see the field in the row set but when I display the template in the dason the bases of this presentation variable the report in the oracle BI Answers is getting updated when I change values but when I use the template builder for microsoft word the the field is being shown in the row set.

How to Get the Debugger Screen in WEB Front end of SRM

Hi Gurus,
I have couple of questions for SRM.
1. How to Get the Debugger Screen in WEB Front end of SRM so i can debug the application which is running in EBP system??
2. How to set the flag for external debugging (HTTP)??
3. Using SICF how to set the ITS services ( Like BBPSC01 )for internal ITS so as soon as i place the order it should stop at the break point which i have set in the application.
Thanks.
Regards,
Manoj Tiwari

Setting up Debugging for Integrated ITS
Tcode SICF.
Select service (e.g. default_hostàbcàguiàsapàitsàbbpsc01).
Change service settings and insert parameter ~GENERATEDYNDPRO=1.
Find program to debug. E.g. SE93. Enter bbpsc01 à Display and get Program field (SAPLBBP_SC_UI_ITS)
Execute SE38 and enter program name.
Turn HTTP Debugging ON. UtilitiesàSettingsàDebugging. Click Actv and username.
Add HTTP Breakpoint. Display source code and select Utilitiesàbreakpointsàset.
On External Debugging select HTTP Breakpoint.
Remember to remove breakpoints, deactivate debugging and remove parameter GENERATEDYNPRO.
Can run program RSBREAKPOINTS to find which programs you have breakpoints set in.
Have fun with EBP
If you have any more questions i would be happy to help you. Send me mail on [email protected]

How to display the current date in the prompt value.

Hi,
How to display the current date in the prompt value. When the user runs the query he want the current date to be displayed in the prompt value and he should also be able to change the date if required ...... I am using web Intellegency BO XI3.0.
Thanks,
Shakthi.

Please refer the below link.
Prompt with default date ( currentdate-1 and current date-8)
http://www.dagira.com/2008/07/15/how-can-i-make-today-my-default-prompt-value/
http://www.dagira.com/2008/07/21/using-a-magic-date-value-in-prompts/
Regards,
Bilahari

How to display BLOB image column with WEB application, JSF, ADF BC

I looking for a way to display the content from a blob column on a WEB application, JSF, ADF BC
The blob column contains a JPEG image.
About the application
The model contains a viewobject where the blob column attribute (photoimg) type is of type : BlobDomain
Now I have to create the view to display the content of photoimg inside a JSF-JSP page.
Any advice ?

Search is your friend
How to display the content of a BLOB column in a ADF/BC pages ?
John

How to display the message along with a value using BBP_CHECK_BADI

Hi Gurus,
I need to display a message dynamically when the user create's a shopping cart. I am using Check_badi for this. i.e., I need to display the buyer number and amount left for him dynamically. I am storing both of them in variables and don't know how to display the messages laong with some message " the amount left for <XXXXXX> is <$$$$$$$$>". Can you help me out.
Thanks,
Neelima

Hi,
you can use the function module 'BBP_PD_MSG_ADD'. This is the function module normally used for the displaying the error messages in SRM.
See wether you can use already available error messages , use the transaction SE91 , and the message class being BBP_PD

How to display complex type result from web service?

Hi,
I am trying to invoke a web service with the following code
but I can't display the result. Can someone help me how to display
the result?
<cfset randomID = CreateUUID()>
<cfset today = Now()>
<cfset args = StructNew()>
<cfset args.login = "wanna">
<cfset args.key = "#DateFormat(today, 'YYYY-MM-DD')#
#TimeFormat(today, 'hh:mm:ss')#:#Left(randomID,12)#">
<cfset args.hash= LCase(Hash("123456" & args.key,
"SHA"))>
<CFINVOKE webservice="
http://sandbox.voxbone.com/ws/services/VoxService?wsdl"
METHOD="getCountriesList"
AuthenticationToken="#args#"
RETURNVARIABLE="Result">
<cfoutput>#Result#</cfoutput>

I have tried using that that it display the following. I was
expecting a list of coutries but it display the following text
only. Can you guide me in displaying list of countries?
"object of
voxbone.webservices.services.containers.ArrayOfCountry"
Methods hashCode (returns int)
equals (returns boolean)
getCountry (returns
[Lvoxbone.webservices.services.containers.Country;)
getCountry (returns
voxbone.webservices.services.containers.Country)
getSerializer (returns interface
org.apache.axis.encoding.Serializer)
getDeserializer (returns interface
org.apache.axis.encoding.Deserializer)
getTypeDesc (returns org.apache.axis.description.TypeDesc)
setCountry (returns void)
setCountry (returns void)
getClass (returns java.lang.Class)
wait (returns void)
wait (returns void)
wait (returns void)
notify (returns void)
notifyAll (returns void)
toString (returns java.lang.String)

How to display a user message on WEBI Home page ?

Hi all,
How to display a user message on WEBI Home page ?
like when ever the data gets scheduled at etl side i want to display a message a message on info view home page "new data is uploading" is this is possible to do ?

Unfortunately this is not possible to do "out of the box". There aren't any pre-configured options that will let you do this. You're only real option is to try and modify the infoview source code yourself to do this.
Regards,
Shawn

In sap scripts how to display the driver program

Hi,
I Want to know the sap scripts How to display the output to driver program

Hi,
Go to NACE Transaction.
Select application for ex: if sales V1.
Click on output types.
Select the output type for ex : BA00
Double click on Processing routines.
There you can find the Driver Program name and Script/smart form name.
Reward if useful.
Thanks,
Raju

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to display the header data on different position in alv report

hi all,
how to display the header data on different position in alv report.
for example ,
customer                                                   name
xxxx                                                         xxxx
                 vendor        name     street
                  xxxx         xxxx      xxxxx
pls   help me .

hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

How to display the bw-variables in webi Filter

Similar Messages

Maybe you are looking for