HOW TO DISPLAY THE TEXT

HI ALL
I HAVE GOT THE TEXT USING READ_TEXT
BUT HOW DO I DISPLAY THE RESULT IN ALV REPORT

u got the text in it_lines.
now, loop at it_lines.
concatenate v_text it_lines into v_text separated by space.
endloop.
so, v_text will have the text...but the thing is the text will be of 255 characters...if ur text is more than 255 it will be truncated and only 255 will be displayed.
U can use this v_text to append to the final internal table and use it for display purposes.

Similar Messages

HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS

HI,
   HOW TO DISPLAY THE TEXT ON A PARTICULAR PAGE IN SAPSCRIPTS?

in ur script main window
/: IF &TTXSY-PAGE& = 15.
ur text or standard text
/: ENDIF.
use this.
hope it helps if any issues revert back

How to display the text as a Bold in the Text Element of a Smart Form

Hi,
I created one Smart Form.
In that i created the Text element.
I provide some data also in that.
It is coming as a MS WORD.
I executed my smart form.
Customer Number: &WA_KNA1-KUNNR&
it display the data of the particular customer.
But i need to display the Customer Number as BOLD or else Increase the Size.
For this also I created one SMARTSTYLE.
In that I created the Paragraph and Character Formats also.
Now i assignee that SMARTSTYLE in the Output Option Tab of the Text Element also.
But i unable to get the CUSTOMER NUMBER in Bold.
In MS WORD we have BOLD button.
I selected the Text and Press the BOLD button. At that time it is Highlighted.
Whenever i press the SAVE Button.
Then it is not saved with BOLD.
It is coming in Normal Format.
In the ECC 6.0. I am unable to get the Text as a BOLD.
This text Element is like a MS WORD.
Can you please tell me how to display the Data with BOLD. please tell me. I am unable to get that one.
Thank You.
Regards,
B. Krishna.

Hi,
Check where u have given BOLD. In character Format or in Paragraph format.
In SMART FORM,
1. Change to OLD EDITOR if u are confused with the new one.
        (This can be done by clicking the button left to new editor ).
2. If it is PARAGRAPH FORMAT,
           Give the name of paragraph format in the editor.
            P1         &WA_KNA1-KUNNR&
    If it is CHARACTER FORMAT,
                         <C1> &WA_KNA1-KUNNR&
Thanks,
Nithya.

How to display the text in a classical report before top-of-page?

Hi all,
I am developing a classical report with top-of-page because i want to display the texts of cloumns even users scroll down the output.
But here the problem is i have to display a text and selection screen values in the ouput ,Before this top-of-page. But i couldn't find the way to do it.
Please help me on solving this problem?
Thanks,
Vamshi.

Hi Vamsi,
whenever there is write statement and you are going to display some thing the system checks for the TOP-OF-PAGE and we are helpless here
so declare your heading in the TOP-OF-PAGE only
THIS is SAP provided way of the SYSTEM bahaviour
Regards
ramchander Rao.k

How to display the PK which is it alreday database sequence in a text field

hi alllllllllllllll how to display the PK which is it alreday database sequence in a text field in form instance???

2 ways,
1) select the item in your SQL query and call it item_display - then you can treat it as a normal item with no impact on the database.
2) Set the item to a display only item.
Hope this helps,
Russell

How to center the text displayed in a JList

Hi,
The width of the JList display area is wider than the text displayed. I tried to center the text displayed to make it look nicer. I had tried using "setAlignmentX(Component.CENTER_ALIGNMENT)" in my own ListCellRenderer class but did not work. Any idea how to center the text?
Fai.

Yes, I am using JLabels in my renderer and the following is the code:
public class MyCellRenderer extends JLabel implements ListCellRenderer {
     private static final Color HIGHLIGHT_COLOR = new Color(0, 0, 128);
     public MyCellRenderer() {
          setOpaque(true);
          setIconTextGap(12);
     public Component getListCellRendererComponent(
          JList list,
          Object value,
          int index,
          boolean isSelected,
          boolean cellHasFocus)
          String entry = (String)value;
          setText(entry);
          setFont(new Font("Ariel", Font.BOLD, 18));
          setAlignmentX(Component.CENTER_ALIGNMENT);
          if(isSelected) {
               setBackground(HIGHLIGHT_COLOR);
               setForeground(Color.white);
          } else {
               setBackground(Color.white);
               setForeground(Color.black);
          return this;
Can you point out where to implement the centering logic?
Thanks,
Fai.

How to display the selection screen with icons as well as with text element

How to display the selection screen with icons as well as with texts (written in text elements) for PlantDate, OrderType,WareHouse..

Report zex33.
type-pools: icon.
selection-screen begin of line.
selection-screen comment 1(20) text_001.
parameters: p_werks type marc-werks.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_002.
parameters: p_whouse(10).
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_003.
parameters: p_auart like vbak-auart.
selection-screen end of line.
initialization.
write ICON_PLANT as icon to text_001.
concatenate text_001 text-001 into text_001 separated by space.
write ICON_WAREHOUSE as icon to text_002.
concatenate text_002 text-002 into text_002 separated by space.
write ICON_ORDER as icon to text_003.
concatenate text_003 text-003 into text_003 separated by space.

How to wrap the text in column headers?

Hi Friends,
Can anyone please suggest how to wrap the text in column headers of a Java WebDynpro table?
I believe that caption is the only UI element that a column header can have and it does not allow wrapping of the text.
My original requirement is as follows,
In a table I need to dynamically set the width of the columns according to the width configured by the user in some other view. All the columns of the table are dynamically rendered.
Now what happens is when the user sets the width of the column to a rather low value, say 15 pixels, then the column is displayed like
Supplier Catalog Name
Sheila
Catalog
Name
Dropdown
As you can see it looks rather odd.
Supplier Catalog Name is the header of the column and I use IWDCaption for header.
Sheila Catalog Name Dropdown is the value of a particular row at the specified column. I am using a TextView as the TableCellEditor.
I think what is happening here is that the framework wraps the text in the TextView according to the width specified (15px) and then the column width is extended because it can not accommodate the text (Supplier Catalog Name ) of the column header.
We are using SAP NetWeaver Development Studio 7.0.12 as the IDE.
I searched some forums and many people have suggested using scrollable columns but I don't understand how it will help in wrapping the text in a column header.
Any help would be of great advantage.
Thanks
Amit

Hi Deepti,
Thanks a lot for the answer but the option that you have specified does not wrap the text. Instead it truncates the text being displayed and only the substring of the text which could be displayed in the given pixels is displayed.
I need to show the whole text wrapped (Meaning if the width of the column is not sufficient then the text goes into the next line).
Ayyapparaj,
Thanks to you too for an helpful answer. It seems that the Netweaver has finally come up with a way to wrap the text in the column headers but as Manoj pointed out, I do not see the property headerTextWrapping for a table column, Can you please specify which version of netweaver supports it?
We are using SAP NetWeaver Development Studio 7.0.12 as the IDE.
Thanks
Amit Kapoor

How to display Formatted text in adobe form

In adobe form, I want to display the text which is inputed by formatted text edit in WD ABAP application.
It is always displayed as plain text like '<p>this is test text.</p>'. I have set the attribute Data Format to XHTML, Field Format to Rich Text for the Text Field in adobe form. But it doesn't work.
How to display these formatted text?
Thanks and Best Regards,
Jun

Hi Juergen,
I found Your blog and found it really interesting... though I was not able to use it: I (like Jun Li is asking, I guess) need to use a dynamic text, containing formatting informations (according the xhtml syntax).
I tried to pass it to the form by an ABAP-dictionary based interface and by means of the context (in a webdynpro page), but both tries failed.
Some suggestion will be greatly appreciated.
Thankyou
Simone

How to pull the text for InfoObject in APD

Hi All,
I have a requirement where in I have to combine the data from 2 InfoObjects using an APD based on some conditions.
I need to bring in the text for these infoObjects and there attributes too.
The proposed solution from my side for pulling the text is
u2022 Getting the text from the text table u2013 this is working fine but the performance is not good.
u2022 Making a query above the object and taking the output as the APD input. Now, in the query , I have selected the display option u2018key and textu2019 but when I am using this query as input for the APD, I am not getting the text.
Please let me know how to get the text using the query output and/ or are there any other approach to get the text of an infoObject.
Thanks & Regards
Abhi

Hi,
It is possible to read the text tables of the infobject, for eg In material you can use table /BI0/TMATERIAL
You have to select a Datasource as the 'Database table and use /BI0/TMATERIAL as one of the underlying tables and then choose another datasource with /BI0/MMATERIAL as the underlying table.
Now that you have all the data that is needed you can use the join to connect the above two datasources .Select the join condition (material in this case) and the fields that you would like to be have to the next level from the individual tables that you have selected earlier.
I guess if you work in this way you might get the results that you are looking forward quite easily without writting code.
Let me know if it helps.
Regards
Ankit

How to display the context of a Jbutton to a JTextField

Hi,
There is a key pad (1-9) on a GUI where each key is represented by a JButton. There is also a data entry filed, implemented using JTextField.
However, when the user enters the ID using the key pad buttons each number should be displayed in the data entry field correspondingly (similar to calculator). I have already written the handlers for each button just don't know how to display the contexts in the text field, e.g. if the button 1 is pressed the 1 should be appeared in the text filed immediately. Anyone can help me to get this done?
Thanks in advance,
RMP

Reza_mp wrote:
.. Anyone can help me to get this done?In the actioPerformed method, call textField.setText( textField.getText() + "new data" )

How to change the text of label dynamically

Hi all,
I have done a dynpro program.It requires to implement the dynamically display the label text, for example: there is a label, sometimes, we want to display "Purchase Order" and sometimes we want to display "Sales Order". Can anyone tell me how to change the text of label according to my requirements? thanks in advance!

Hi Wei,
AS of now you will not be able to change the Text Field ( Label ) dynamically or at runtime. This is a limitation.Refer to this link:
http://help.sap.com/saphelp_nw04/helpdata/en/e4/2adbef449911d1949c0000e8353423/frameset.htm
But, there is a way around.
You can make a text field Visible / Invisible based on your program logic. So, based on what you want, you can process a module which will take care of that.
Have a look at these DEMO Code. You can have a good idea to implement the logic.
DEMO_DYNPRO_MODIFY_SCREEN - Demonstration of Dynamic Screen Modifications
Thanks,
Samantak.

How to change the text of a button dynamically in module pool

hi gurus,
how to change the text of button dynamically

Hi ,
Declare a variable in TOP Include with your button name.
Example : P_BUTTON(20) TYPE C.
Place button with name P_BUTTON on you screen. Do not forget to mark it as "Output Field". [ Double click on button, Attributes --> Program tab --> tick "Output Field".
In you PBO / PAI , whereever you want to change your text -
Assign value to P_BUTTON.
Example -
iF COND1..
P_BUTTON = 'EDIT'.
ELSEIF COND2.
P_BUTTON = 'DISPLAY'.
ENDIF.
Regards,
Mohaiyuddin

How to translate the text according the SAP logon

Hi Friends,
I have a report, in the selection screen have 4 radio buttons which characters are displaying in German language , if logon in DE. But not populating in other language (English, French , Italian etc ).
Whenever SAP login in u201CENu201D , is displaying an Information message u201CUntranslated texts from master language DE wi also be displayedu201D.
Please guide me how to translate the text according the SAP logon.
in GOTO-> Translation -> Original language "DE" and traget language is empty.
Regards,
Subash

Did you try transaction SE63?
Translation -> ABAP Objects -> Short texts, select object type S3 and either REPT or SCRT, probably REPT since it's a selection screen.

How to set the 'text' property of a 'Header' region dynamically?

Hi,
I have a requirement to display the 'text' property of a 'Header' region, based on a query.
So I need to set the text property programatically in CO.
Can I use setText("..") by getting the handler to the 'Header' region?
If so, How to get the handler for the 'Header' region?
Message was edited by:
user594528

How to get the handler for the 'Header' region to call the setText()?
OAHeaderBean Header1 = (OAHeaderBean)...........................
Header1.setText("....");

HOW TO DISPLAY THE TEXT

Similar Messages

Maybe you are looking for