How to display y -axis values in inside bar header Using FormsGraph

Hi
i am using 10g developer and FormGraph.jar for using graph.
Problem is that i want to show y-axis label(3,4,7,10,3) inside in headers of bar in bar graph
pls any suggesion
Thanks

Wouldn't a pie graph be more appropriate in this case?
Or if you have to use a bar graph - maybe using reference lines to indicate the limits would be the right way to do this.

Similar Messages

Displaying X axis values in iChart - Bar

Hi,
i want to display values in x axis in iChart- Bar type. ie if my Database have 2 fields say time and no, i want to display no value in y axis and corresponding time in x axis. how can i do?
anyone please help me where do i get manual for display templates in very briefly?
- senthil

Hi senthil,
                  Go through this help
ValueColumns   : This controls which data columns in a query will be used as the values to plot on the chart.
LabelColumns   : This controls which data columns in a query will be used to create "virtual tag names" when the chart is drawn. This set of parameters is typically not needed when the query source is a Tag connector, but is required when the source is a SQL or Alarm connector
DescriptionColumns : This controls which data columns in a query will be used to create "virtual tag descriptions" when the chart is drawn. This set of parameters is typically not needed when the query source is a Tag connector, but is required when the source is a SQL or Alarm connector.
DatalinkColumns : This controls which data columns in a query will be used to create "datalink" items associated with each item in the legend. This is convenient means of associating special column values such as a part code, downtime ID, or other internal key field that has no meaning to the end user but is valuable when cross-correlating or linking with other applets. The first mapped Datalink column is also used by the MouseTracking feature.
AxisValueColumn : This is used to create explicit X-Axis values from a returning column in the query
AxisLabelColumns : This controls which data columns in a query will be used to create X-Axis labels associated with each data point in the chart. This is supported only with barchart-style charts (Bar, GroupBar, StackedBar, FloatingBar, and Variability Bar).
MinRangeColumn : This controls which data columns in a query will be used to create the minimum pen scaling range for the Y-Axis legend.
MaxRangeColumn : This controls which data columns in a query will be used to create the maximum pen scaling range for the Y-Axis legend.
IncludeValueInLabel : This controls whether the value column names will be merged with the LabelColumn column names when generating "virtual tag names".
FieldSeparator : This controls the character that will be used when appending multiple string values in the creation of "virtual tag names".
If you didn't get the result, write here
regards
Vijaya

How to display the excluded values in the filter panel using WAD 3.5

Hi Experts,
I have a requirement in that we need to display five reports as tables.
In these queries two of them have multiple excluded values.
Now i need to display these excluded values in filters pane in my web template.
appriciate your help in advance.
James
Edited by: james_ava on Nov 8, 2010 5:46 PM

Hi James,
I believe you are interested in displaying static filters in two of your queries as defined at design time. If so, why not use a Text Element webitem for your display since a Filter Pane is used to filter Characteristics on runtime & display their corresponding filtered values. You may insert two Text Elements for each of your DPs in question, & enable 'Display static filter values' for each. Let me know if this helps.
Refer foll. help link for more:
http://help.sap.com/saphelp_nw04/helpdata/en/9f/4e9d39d44cd45ee10000000a11402f/content.htm
--Priya

How to display the sort value in the selection screen in the report title

Dear All,
How to display the sort value in the selection screen in the report title? I have selected a value in the selection screen for sorting , but i need that values by which i have sorted with in the report title. Can you please throw some light on this!!
Good day,
Thanks and regards
Arun S

Hi Arun,
Try this.
1, Set one dynamic parameter,
2, Drag and drop that parameter into your report title.
3, Pass the value(sort value) dynamically from your application,
4, Cheers..
Other wise Try with Dataset, create a dataset and fill thev alue into that.. Then set the data source from CR designer. and darg and drop that data column into the report.
Hope this will work,
Regards,
Salah
Edited by: salahudheen muhammed on Mar 25, 2009 11:13 AM

How to display first row value returened from a query as checked as default in a report

How to display first row value returned from a query as checked as default in a report
Example
Parameter 1
Paramerter2
ABD
x(checked)
Test
DEF
JMG
Mudassar

Hi Mudassar,
The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
order to solve the issue.
If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
the specific value in Default Values dialog box.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How to display horizontal line in top-of-page by using object oriented ALV?

How to display horizontal line in top-of-page by using object oriented ALV.
I am created top-of-page in object oriented alv.
But not be successes in showing horizontal line in it.
Can any one pls give solution for this..
Thanks and regards..

Hi
Try like this
data: gt_list_top_of_page type slis_t_listheader. " Top of page text.
Initialization.
perform comment_build using gt_list_top_of_page[].
form top_of_page.
* Note to self: the gif must be loaded into transaction OAOR with
* classname 'PICTURES' AND TYPE 'OT' to work with ALV GRID Functions.
* I Loaded NOVALOGO2 into system.
call function 'REUSE_ALV_COMMENTARY_WRITE'
     exporting
* I_LOGO = 'NOVALOGO2'
* i_logo = 'ENJOYSAP_LOGO'
         it_list_commentary = gt_list_top_of_page.
endform. " TOP_OF_PAGE
form comment_build using e04_lt_top_of_page type slis_t_listheader.
data: ls_line type slis_listheader.
      clear ls_line.
      ls_line-typ = 'A'.
      ls_line-info = 'Special'(001).
      fgrant = xgrant.
      concatenate ls_line-info fgrant
      'Stock Option Report to the board'(002)
             into ls_line-info separated by space.
                    condense ls_line-info.
      append ls_line to e04_lt_top_of_page.
endform. " COMMENT_BUILD
Use following syntex for footer print in alv:
* For End of Page
form END_OF_PAGE.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
* For End of Report
form END_OF_LIST.
data: listwidth type i,
        ld_pagepos(10) type c,
        ld_page(10)    type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
check this link
http://abapprogramming.blogspot.com/
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
Changing width of a custom container dynamically
Display Page numbers in ALV
Insert picture in selection screen.
Logo in OO ALV Grid
Reward all helpfull answers
Regards
Pavan

How i display mac app store downloading progress bar ? please help, how i display mac app store downloading progress bar ? please help

how i display mac app store downloading progress bar ? please help ?

it does not respond every time i hit download button,nothing appers

How to show the VALUE as the Column Header using SQL query?

Hi
I have a requirement to show the picked value as the column header using SQL query.
Example:
======
SELECT EMPNO FROM EMP
WHERE EMPNO=7934;
Result Should be:
7934
7934

I have a requirement to show the picked value as the column header using SQL query.In sql*plus you can do
SQL> set verify on
SQL> def e = 7934
old: SELECT empno "&&e" FROM emp WHERE empno = &&e
new: SELECT empno "7934" FROM emp WHERE empno = 7934
SQL> SELECT empno "7934" FROM emp WHERE empno = 7934
7934
7934
1 row selected.

How to display a default value in BI Publisher

Hello friends,
I need to display a report based on supplier wise or dept wise stock.i've taken parameter type as menu and selecting the values from the drop down list for ex(1,2,3...)... what i want is I should display a default value like select item or something like that in drop down list so that any of the above said values are not shown to the reports user...
Please let me know how...
Thanks

Hello vetsrini,
thanks a lot for the reply... may be I'm not able to put my requiremet straight.. let me try one more time
My requirement is like the end user has to get the report based on whether he want dept wise or supplier wise
so
where sl.supplier=:supp
or d.dept_no=:dept
this is what i've given in the data set
the user gets report data based on either dept wise/supplier wise..
so I've given query in lov as select distinct dept_no from dept and select distinct supplier from suppliers for the two parameters supp and dept and the type as menu...
so I can see the values like (list of query generated values... ).. I want to do this thing like I want to display 'select' in that list...
is it possible?... Please let me know, if possible..
it should show like dept:select,101,102,103,104....)

How to get y axis value(in a numeric control) by providing x-axis value using wave graph

Hi,
I'm new here, Sorry if i have selected wrong Location.
I want to get Y-axis value (in a numeric Control) by providing X-axis Value using Wave graph.
i want to do calculations with the obtained value.
i have attached File and Snapshot.

Well, you are using the Dynamic Data Type, which I almost never use, but if you convert the data to a WaveForm (using From DDT on the Signal Manipulation Palette, which is a choice when you right-click on the DDT Wire), you should be able to do this. Do you know about how Waveforms are stored? They are a Cluster, with t0 being a TimeStamp for the start of the Waveform, dt being the time step, and Y being the samples. So if you want a point at 0.5 seconds and dt is 0.001, you would pull out the point at Index 499 (offset 0) from the Y array.
Bob Schor

How to display a variable value in WAD?

I am using a replacement path variable to filter a report by project number. While this works fine, the project number is not easily visible (only via Filter -> Display All Filter Values and this only displays the description, not the key).
How can I display the key and the description of the project number variable at the top of the report?
Thank you,
Dennis

The first part is right -
1) drag a text element onto the page, at a location in which you want the variable value to be displayed
2) On the left hand bottom page - go to the web item properties for the text element
3) scroll down to the specific properties for the item - in that uncheck the first two check boxes - display general text elements & display static filter values
4) in the next item in the properties (List of text elements) click once on the box where List is written and then clcik on the small browse button that appears.
5) in the window that opens, in the element type field, select variable/variable value as key (as per your requirement) and then under the element ID field type in the technical name of your variable that you want to display.
click ok and save your template and try executing it.
See if this solves your problem.
regards,
Nikhil

How to display only Day value instead of DATE in Bex Report

Hi Experts,
We have a Month to date Report, in this report we need to display only day value instead of DATE value,
Like
if Date is 14.05.2010 we need to show only 14
Regards,
Chandra

Hi ,
Thanks for Quick Response
we does have the option to create the char(calday or ...) value variable replacement with char (calday or ...) info object, we can replace with Report r variable value only not with info object.
i hope we can replace the with info object only with formula variable with replacement.
My BEx Report is Designed like
Columns
0Calday
Rows
Plant
Keyfigures
Actual
Plan
Report output Looks like month to date
0CALDAY            01.06.2010   02.06.2010 03.06.2010
P1 ACTUAL            10                     8                    4
P1 PLAN                 15                     6                    2
P2 ACTUAL              5                   10                     7
P2 PLAN                  4                      8                    3
Report should be
0CALDAY            1    2     3
P1 ACTUAL      10     8      4
P1 PLAN           15     6     2
P2 ACTUAL        5    10    7
P2 PLAN            4      8     3
please let me know how can i achive this
Regards
Chandra

How to display top 10 values in a Webi report?

Hi,
I have the following requirement.
If the report contains 'State' and 'Revenue' columns, I need to display top 10 cities with highest revenue and the revenue of the remaining cities can be summed together and should be available in a separate cell.
I tried several formulae to achieve the requirement but was unsuccessful.
I created a variable using the formula: '= If (Rank(<State> ,<Sales revenue>)>10 ) Then Sum(<Sales revenue>) Else 0' and added it as a column in the report. This provides the required results.
When I add this variable as a column in the report, it displays 0 for the first top 10 values and only displays the remaining values. After that we can apply the Sum on this column to get the sum of the remaining (Other) sales revenue excluding top 10 values. However I cannot display this sum in a separate cell.
Please provide some suggestions on this.
Regards,
Aditya Joshi

Hi Aditya,
Could you please try the following solutions to resolve the issue.
Solution1:
In Oracle, there is a function called: RANK() OVER (PARTITION BY () ORDER BY ()) which can be used to define an object at Universe level to return a rank position when used in a report. If you can check with your DBA - there is a similar function available for SQL Server. It should be RANK() OVER (ORDER BY colname) AS () FROM.
Solution2:
Or you can also try returning all rows in query, apply sort at report level & apply alerter to highlight the top 10 values.
Regards,
Sarbhjeet Kaur

How to Display Parent Form Values in Child Form

Hi,
I have Order Page and Item Page
In the order Page If I select any Item and click on Submit Button, It should open Item Page and results should display in advance table region. In my Item page i have header region(Default double) with 3 fields (dummy) like
Item
Description
org
Now my question is I need to display the Item Value in the Item Page Header region in the Item Column which I was selecting in the Order Page.
I have an order 100 with item A, B , C I select B and click on submit It should open Item Page and in items page i have a column called Item and the value B sholud be populated.
Thanks,
Mahesh

Hello Ajay,
Thanks for your reply..
What Iam doing is Iam capturin the values in session variables like below when submit button is clicked
pageContext.putSessionValue("SItemNo",ItemNo);
And when my item page is opening I need to set this value to that VO Attribute..
Iam trying the below way to set the attr value in PR
String SItemNo=(String) pageContext.getSessionValue("SItemNo");
OAMessageTextInputBean oa = (OAMessageTextInputBean)webBean.findChildRecursive("ItemNo");
oa.setAttributeValue(SItemNo);
But it is giving compilation error
Error(35,9): method setAttributeValue(java.lang.String) not found in class oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean
Please correct me ajay.
Thanks,

How to display several axis systems in one sheet

Hi all,
I want to use diadem script to display 4 axis systems in one sheet (top left, top right, bottom left and bottom right). Each system contains one curve. I have no idea which script command should I use. Would you like to give me some hints? Do I need to use the variable like "D2AxisLeft" ?
Thanks in advance
Kind regards
Zhiyao

Hi Zhiyao,
I would recommend that you manually place 4 axis systems onto your REPORT sheet, in the orientation you prefer, then save this configuration as a *.TDR file, then programmatically load that *.TDR file with the PicLoad() command, followed with the PicUpdate() command. Ideally you would also configure each of the axis systems with one curve on them that pulls data from the correct group/channel names in the Data Portal, so that loading the *.TDR file will give you exactly the report you want with just those 2 script commands.
Please specify if you need to accomplish more than this programmatically,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

How to display y -axis values in inside bar header Using FormsGraph

Similar Messages

Maybe you are looking for