How to distinguish LOVs on different requisition lines? (in advanced table)

Dear,
I have a customer requirement in iProcurement 11.5.10 on the CheckoutLinesPG page to have an LOV that will provide data for one attribute on the PO Requisition Lines DFF, it allows the customer to select the so called Desk Location, or a delivery point, for possible multiple deliveries of a single distribution line for different requestors.
So what I did I put the custom region there with LOV and the LOV part works fine.
I have another requirement – if One Time Address is created(used,engaged) on that requisition line – my custom LOV on that line (and ONLY that line) should be disabled. And here I came into a problem because if I disable my LOV based on the AddOneTimeAddress event (or any event for that matter) – ALL requisition lines show LOV as disabled.
The way the seeded application works – the OneTimeAddress page (it is the PAGE) accepts the requisition line id and passes it back to the calling CheckoutLinesPG page so that the calling page knows which requisition line the one time address is related to. But for me to create another custom page where custom LOV will be placed will be too much navigation for the customer.
Is there a better approach to the problem?
Thank you.
Anatoliy

There is something called Switchers which can help you. Read the dev guide.
Just to give an Idea, there is a view Attribute associated to the switcher region. In the VO you would control the value of the view attribute based on some condition (Decode logic to identify if some data exists or anything of the sort). The value of the attribute (conditional) should be the same as the ID of the item put under the Switcher.
When based on the VO condition, the switcher attribute valus is 'a' then the item with id 'a' under the switcher would be shown.
Regards
Sumit

Similar Messages

How to transfer the contents of a line of a table control to second screen?

Hi,
I have a table control and I have entered some contents in one line of a table control .
When i click on this line and then click on the detail button on the screen , it should take me to another screen and whatever I have entered in the table control should be transferred to the second screen .
Please could anyone help me out with this .
Regards,
Sushanth H.S.

Hi
U need to get the index of the line of table control by command GET CURSOR:
PROCESS PAI.
LOOP AT ITAB.
   MODULE GET_CURSOR.
   MODULE MODIFY_ITAB.
ENDLOOP.
MODULE USER_COMMAND.
Module to pick up the selected line:
MODULE GET_CURSOR.
GET CURSOR LINE VN_LINE.
ENDMODULE.
Module to transfer the data from table control to internal table:
MODULE MODIFY_ITAB.
ITAB-FIELD1 = <FIELD OF TABLE CONTROL>.
MODIFY ITAB INDEX <TABLE CONTROL>-CURRENT_LINE.
ENDMODULE.
U should considere the variable line has the value of the index of the line of table control, so u need to calculate the number of the corresponding line of internal table:
MODULE USER_COMMAND.
CASE OK_CODE.
    WHEN 'DETAIL'.
* Calculate the line of internal table:
       VN_LINE = <TABLE CONTROL>-TOP_LINE + VN_LINE - 1.
* Read the data
       READ TABLE ITAB INDEX VN_LINE.
* Transfer the data to the output structure of the new screen
       <STRUCTURE>-FIELD1 = ITAB-FIELD1.
* Call the new screen
       SET SCREEN <NEW SCREEN>.
       LEAVE SCREEN.
Max

How to get the values of all rows in advanced table

HI All,
I am using an advanced table to enter the values for the service contract line (its a custom page)in that advanced table i ahave column with lov called task number for that task number once i had choosed one task number and creating one more row using add anethor row button i want to restrict the user to not to choose the task number which was entered in the previus row.
Or if this is not possible i want to restrict the user by showing an error message when click on the submit button by saying you have choosed the duplicate task number please choose a uniqu task number
please give some hints
thanks
ajay

Hi
your approach will have two steps
1.) use the row refernce and get the value of task number of the row which is enterd by user .
2.) use getRows in range and compare values of task number of every row with the user selected value ,if value match then throw error.
Thanks
Pratap

How to get set file name for MessageFileUploadBean in Advanced Table

Hello Everyone.
I have a MessageFileUpload item in a advanced table. My requirement is to show file names instead of view when user uploads files. I know how to do this if the item is not inside advancedtable (by using uploadBean.setAttributeValue(DOWNLOAD_FILE_NAME,displayNameBoundValue).
But how to get the different ID's when inside a advanced table?
Thanks
Sunny

try setting a transient view attribute to this message file upload, if you iterate through vo, I hope you can just get the path user browses.
Regards
Shobht S

Adding a Line in Advanced Table

Hi,
I see the following code to add line to a advanced table.Can you please explain what these method does. I understand that getRangesize and getrangestart will always give the absolute value of the current range. But then how this piece of code works?
int index=vo.getRangeIndexOf(voLines.last())+1;
voLines.insertRowAtRangeIndex(index,row);
Thanks,
Viswanath

Will insert at the specified index in the current range.
Following is the javadoc of the InsertRowAtRangeIndex - Hope it helps.
Adds a row to the row set at the given index. The index is relative to the range, i.e., index of 0 would mean to insert before the first row of the range. Allowed values for index is 0 to range size. If index equals range size, the row is inserted right after the last row in the range. This method call does not alter the current position of the iterator, nor does it affect the range position.

How to set color for a particular column in advance table?

How can we set the color of a particular column in advance table based on some parameter feteched from vo query in process request?

i have tried the same way as mentioned in the post but ,its giving error
java.lang.ArrayIndexOutOfBoundsException: 0
processRequest code
OAAdvancedTableBean table =
(OAAdvancedTableBean)webBean.findIndexedChildRecursive("TimEntAdvtbl");
if (table != null)
System.out.println("table");
OAColumnGroupBean daily =
(OAColumnGroupBean)table.findIndexedChildRecursive("DailyColGrp");
if (daily != null)
System.out.println("daily col");
OAColumnGroupBean ColGrp6 =
(OAColumnGroupBean)table.findIndexedChildRecursive("ColGrp6");
if (ColGrp6 != null)
System.out.println("ColGrp6");
OAColumnBean SatCol =
(OAColumnBean)webBean.findIndexedChildRecursive("SatCol");
if (SatCol != null)
System.out.println("col");
OAMessageTextInputBean sat1 =
(OAMessageTextInputBean)SatCol.findIndexedChildRecursive("sat");
if (sat1 != null)
System.out.println("sat1");
OADataBoundValueViewObject csssat= new OADataBoundValueViewObject(sat1,"Color");
sat1.setAttributeValue(oracle.cabo.ui.UIConstants.STYLE_CLASS_ATTR, csssat);
Error Page
## Detail 0 ##
java.lang.ArrayIndexOutOfBoundsException: 0
     at oracle.sql.NUMBER._fromLnxFmt(NUMBER.java:3199)
     at oracle.sql.NUMBER.toString(NUMBER.java:761)
     at oracle.sql.NUMBER.stringValue(NUMBER.java:2090)
     at oracle.jbo.domain.Number.toString(Number.java:390)
     at oracle.apps.fnd.framework.webui.OADataBoundValue.formatObject(Unknown Source)
     at oracle.apps.fnd.framework.webui.OADataBoundValue.convertValue(Unknown Source)
     at oracle.apps.fnd.framework.webui.OADataBoundValue.convertValue(Unknown Source)
     at oracle.apps.fnd.framework.webui.OADataBoundValueViewObject.convertValue(Unknown Source)
     at oracle.apps.fnd.framework.webui.OADataBoundValue.getValue(Unknown Source)
     at oracle.apps.fnd.framework.webui.OADataBoundValueViewObject.getValue(Unknown Source)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.getAttributeValueImpl(Unknown Source)
     at oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean.getAttributeValueImpl(Unknown Source)
     at oracle.cabo.ui.BaseUINode.getAttributeValue(Unknown Source)
Please help

How to calculate the total of absences? How to collect data from a specific line of a table?

Hi,
Again, I made a nice coloured picture from a screen capture which summarise the improvements that I would like to make in my form,
Situation:
For an educational purpose, I made this form   to simplify the way of recording the data and also to develope the independence of the students.
( I am doing this on a voluntary basis, working extra hours on my free time but I don't really mind because I am learning a lot of things in the same time)
After being tested by the teacher, the student has to record the short date, the lines memorised, his grade, number of mistakes, and his attendance.
I created everything in Word, then converted the file in PDF, then I created all the different fields with Adobe acrobat.
There is in total 4 sheets, there are all similar except the first one in which there is a box with: date started, date finished, total time spent, absences.
Below this box there is a table with 16 lines from (A to P) and 7 columns (Days, Date, From.. to.. , Grade, No. lines memorised, No. Errors, Attendance) ( so this table is present on all the sheets)
Due to the fact that some students need more time than others, and also beacause some text need more time, I estimated a need of 4 sheets at the very most.
I would like to make the following amelioration and automate the inputting of some of the data because I know that some of the students will certainly forget, so to avoid this scenario I am trying to make this form the easiest possible.
screen capture of the form:
screen capture of the form editing, you can see the names of the different fields:
here is the form (only the first page) : http://cjoint.com/12fe/BBotMMgfYIy_memorisation_sheet_sample.pdf
In yellow 00000:
At present, the students has to input the total of absences manually, is there a way ( script) to automate this by initialising the field next to "Absences" at " 0 day"   and then everytime that Absent is selected from the COMBO BOX, it add 1 and it is displayed like this: " 1 day" then " 2 days" then " 3 days" etc … (so from what I read I have to initialise a counter a the beginning and then for (i...   ) count= count++; something like this...
Furthermore, I need a solution to overcome the possibility that a second sheet may be needed for the same student; therefore I would need the data from the "attendance column" from the second sheet ( and perhaps the 3rd and 4th aswell) to be added on the "absences field" in the first sheet
My idea: everytime that the short date is inputted in the first line (next to A) in the "Date" column of one of the 4 sheets then we check the 16 Combo box of the attendance column in this sheet instead to check 16*4=64 fields fot the 4 sheets in one go?
but I don't know at all how to write it in Javascript. Or perhaps there is a way more easier than that?
Shall I allocate a value for Absent on the “ export value”?
In purple
At present I wrote a simple script which matches the number of lines to the poem selected (Eg. if I select the poem V.Hugo, the number "36" will appear next to Number of lines).
Again I would like the make the life of the students very easy so I would like a script which detects this number “36” on the "From .. to …" column, as soon it is detected (on the first sheet or 2nd or 3rd or 4th) check from the same line if "A / Pass" or "B / Pass" have been selected in the "Grade" column ,if yes the short date inputted on this line will be written on the field next to "Date finished" .
this is a simple example with 36 lines only but somethimes, the students may have to memorise 80 lines and more, this is the reason for having 4 sheets in total.
So basically I would like to automate the field next to" Date finished:" with a script that collect the short date from the day in which the student has finished his memorisation with "A / Pass" or "B / Pass"
As for the "Total time spent" George Johnson helped me with a script that calculate the difference betwen date started and date finished (thank you)
I am sollicting your help, because after trying for hours I was really confused with the different if/else needed. And in top of that, it’s my first experience with Javascript.
I anticipate your assistance, thanking you in advance.

I found this for counting the absences, its give you the total that's perfect, but is there a better methode which avoid me to write all the fields name, more simple????
( I found the idea here : Re: Total number added automatically )
// custom calculation script for field "Total #"
function CountFields(aFields) {
var nFields = 0;
for(i = 0; i < aFields.length; i++) {
try {
// count null values, export value of Absence is 0;
if(this.getField(aFields[i]).value == "0") nFields++;
} catch(e) {
if(e['message'] == "this.getField(aFields[i]) has no properties") app.alert("unknown field name: " + aFields[i]);
else app.alert(e.toString());
} // end catch
} // end for aFields
return nFields;
// create array of field names to count
var aNames = new Array("Sheet1AttendanceA","Sheet1AttendanceB","Sheet1AttendanceC","Sheet1AttendanceD","Sh eet1AttendanceE","Sheet1AttendanceF",
"Sheet1AttendanceG","Sheet1AttendanceH","Sheet1AttendanceI","Sheet1AttendanceJ","Sheet1Att endanceK","Sheet1AttendanceL",
"Sheet1AttendanceM","Sheet1AttendanceN","Sheet1AttendanceO","Sheet1AttendanceP" );
// count the non-null fields;
event.value = CountFields(aNames);
As for the 2nd question, I've tried to do something similar to the previous script, but of course it doesn't work, but I am quite sure that the idea is similar:
I don't know also how to add the other condition: the student should get A / Pass or B / Pass in order to consider he has finished??? and also how to check these condition from page 2, 3 and 4 and collect the date
function Datefinished(bFields) {
d2.value = nFields[i].value;
for(i = 0; i < aFields.length; i++) {
try {
if(this.getField(aFields[i]).value == this.getField("NumberLines").value) d2.value = nFields[i].value;
} catch(e) {
if(e['message'] == "this.getField(aFields[i]) has no properties") app.alert("unknown field name: " + aFields[i]);
else app.alert(e.toString());
} // end catch
} // end for aFields
return nFields;
// create array of field names to check
var aNames = new Array("Texte00","Texte54","Texte56","Texte58","Texte60","Texte62","Texte64","Texte66","Te xte68","Texte70","Texte72","Texte74","Texte76","Texte78","Texte80","Texte82");
var bNames = new Array("d1","d3","d4","d5","d6","d7","d8","d9","d10","d11","d12","d13","d14 ","d15","d16","d17");   // d1 is included because in some cases a student can finish in 1 day (short text);

How to set cursor at the first line in a table control?

Hi,
I have a customized infotype screen where a table control is being used to input new values.The tab control has 30 lines.Now, the problem is that when the screen is displayed, the cursor always starts at 8th or 4th line.The behaviour is not very consistent.I tried the following statement in the PBO, but no effect.
SET CURSOR FIELD P9417-ZCOUNTRY LINE 1. ( P9417-ZCOUNTRY is the name of the tab control field where i want to set the cursor ).This is the last statement in the PBO.
Can someone please tell me why still I am not able to set the cursor at the first line? I have infact noticed that , in the debugging mode , sometimes the cursor starts at the first line.Please help. Thanks

I have got a new requirement on this now. If the table control does not have any records , then the cursor position should be on the first row.Otherwise, if it already has some records, then the cursor should be at the first empty row.I wrote the code like below.
if sy-ucomm = 'INSERT'.
set cursor 'P9714-ZCOUNTRY' line 1.
else if sy-ucomm eq 'CHANGE'.
describe table itab lines fill.
fill = fill + 1.
set cursor 'P9714-ZCOUNTRY' line fill.
endif.
I am facing a strange problem now.The table control has some 10 rows when you see the screen for the first time.If the number of records already present is less than 10, I am able to position the cursor on the first empty row.But if the number is say 15, then the cursor position goes to eighth or fourth line or sometimes the first line.
Is there any way to display the last few records , ie, if there are 15 records , is there any way to display the last five rows when I see the screen for the first time, rather than showing the first 10 records?How can I position the cursor at the first empty row, when there are more records?
Thanks in advance..good answers will be rewarded.
Mahesh

How to get the last different occurrence in a SCD table

hey,
i have a slowly changing dimension and i want to get the last different occurrence for each row.
Sample Data
the field LAST_VALUE is the one i'm looking for.
ID     START_DATE     END_DATE     VALUE     LAST_VALUE
1     01/01/2000     01/02/2000     X     null
1     01/02/2000     01/03/2000     X     null
1     01/03/2000     01/04/2000     Y     X
1     01/04/2000     01/05/2000     Y     X
1     01/05/2000     01/06/2000     X     Y
1     01/06/2000     01/07/2000     X     Y
1     01/07/2000     01/08/2000     Z     X
1     01/08/2000     01/09/2000     Q     Z i want to try and do that without three sub selects.
i've tried analytic functions but lag brings me the last occurrence which is not necessarily different.
thanks.

Something like this :
SQL> with sample_data as (
2    select 1 ID, to_date('01/01/2000','DD/MM/YYYY') START_DATE, to_date('01/02/2000','DD/MM/YYYY') END_DATE, 'X' VALUE from dual union all
3    select 1, to_date('01/02/2000','DD/MM/YYYY'), to_date('01/03/2000','DD/MM/YYYY'), 'X' from dual union all
4    select 1, to_date('01/03/2000','DD/MM/YYYY'), to_date('01/04/2000','DD/MM/YYYY'), 'Y' from dual union all
5    select 1, to_date('01/04/2000','DD/MM/YYYY'), to_date('01/05/2000','DD/MM/YYYY'), 'Y' from dual union all
6    select 1, to_date('01/05/2000','DD/MM/YYYY'), to_date('01/06/2000','DD/MM/YYYY'), 'X' from dual union all
7    select 1, to_date('01/06/2000','DD/MM/YYYY'), to_date('01/07/2000','DD/MM/YYYY'), 'X' from dual union all
8    select 1, to_date('01/07/2000','DD/MM/YYYY'), to_date('01/08/2000','DD/MM/YYYY'), 'Z' from dual union all
9    select 1, to_date('01/08/2000','DD/MM/YYYY'), to_date('01/09/2000','DD/MM/YYYY'), 'Q' from dual
10 )
11 select v.id
12       , v.start_date
13       , v.end_date
14       , v.value
15       , last_value(case when value != prev_value then prev_value end ignore nulls)
16               over(partition by id order by start_date) as "LAST_VALUE"
17 from (
18    select t.*
19         , lag(value) over(partition by id order by start_date) as prev_value
20    from sample_data t
21 ) v
22 ;
        ID START_DATE END_DATE    VALUE LAST_VALUE
         1 01/01/2000 01/02/2000 X
         1 01/02/2000 01/03/2000 X
         1 01/03/2000 01/04/2000 Y     X
         1 01/04/2000 01/05/2000 Y     X
         1 01/05/2000 01/06/2000 X     Y
         1 01/06/2000 01/07/2000 X     Y
         1 01/07/2000 01/08/2000 Z     X
         1 01/08/2000 01/09/2000 Q     Z
8 rows selected

How to pick the value of the line item in table control

My screen.
I have designed table control by referring internal table without using wizard.
I have placed button inside of that table control.
my requirement is by clicking the button it ll show the value of the line inside of the table control.
I have used "get cursor...".
But the problem is "it ll show only the cursor value of the front screen, if suppose i scroll the value of table control at the time also, it ll show the cursor value of the screen, it ll not show the exact value of the cursor inside of the table control.

Wrong Forum Anand......!

How to build LOV based on colon deliminated values in table?

Hi All,
I have a CUSTOMERS table with a column TYPES. This column stores colon deliminated values coming from a standard shuttle element eg.:
CUSTOMER_NAME   TYPES
Customer 1      1:2:3
Customer 2      2:3:4I need to build a query which will return me all types (as rows) based on a given customer, Eg. in the above example, for Customer 1 I should have something like:
CUSTOMER_NAME   TYPE
Customer 1       1
Customer 1       2
Customer 1       3Any ideas?

I have a set of examples showing how to do that here:
http://apex.oracle.com/pls/otn/f?p=31517:84
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
------------------------------------------------------------------------------

How to perform delete operation on Delete Column In Advance Table?

Hi All,
I have to add a delete column in seeded page(Advance table).
For that I have followed jdev tutorial.Now after clicking delete image the column is not deleting also it is not throwing any error except mine.
Please Help.
Regards,
SHD

Hi AJ,
In the seeded table there is a seeded column correct.Where it is using above parameter.But while I am using same parameter it is doing nothing.
For deleting is it necessary to extend VO or EO?
Here is my code in pfr
                                String recordNumber = pageContext.getParameter("record");
                                OAException mainMessage =
                                new OAException("Are you sure you want to delete this employee"+recordNumber);
                                OADialogPage dialogPage =
                                    new OADialogPage(OAException.WARNING, mainMessage, null, "",
                                String yes = pageContext.getMessage("AK", "FWK_TBX_T_YES", null);
                                String no = pageContext.getMessage("AK", "FWK_TBX_T_NO", null);
                                dialogPage.setOkButtonItemName("DeleteYesButton");
                                dialogPage.setOkButtonToPost(true);
                                dialogPage.setNoButtonToPost(true);
                                dialogPage.setPostToCallingPage(true);
                                dialogPage.setOkButtonLabel(yes);
                                dialogPage.setNoButtonLabel(no);
                                java.util.Hashtable formParams = new java.util.Hashtable(1);
                                formParams.put("compElementId", recordNumber);
                                dialogPage.setFormParameters(formParams);
                                pageContext.redirectToDialogPage(dialogPage);
                            } else if (pageContext.getParameter("DeleteYesButton") != null) {
                                String recordNumber = pageContext.getParameter("record");
                                Serializable[] parameters = { recordNumber };
                                OAApplicationModule am = pageContext.getRootApplicationModule();
                                OAApplicationModule compElementAM = (OAApplicationModule)am.findApplicationModule("xxCompElementsAM");
                                if(compElementAM==null) {
                                    compElementAM=(OAApplicationModule)am.createApplicationModule("xxCompElementsAM","xxmycompany.oracle.apps.per.selfservice.competency.profile.server.xxCompElementsAM");
                                compElementAM.invokeMethod("deleteRecord", parameters);
                                MessageToken[] tokens =
                                { new MessageToken("compElementId", recordNumber) };
                                OAException message =
                                new OAException("Are you sure you want to delete this employee"+recordNumber);
                                pageContext.putDialogMessage(message); regards,SHD
Edited by: SHD on May 6, 2011 3:31 AM

Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.

Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx ‏65 KB

How Shall I programatically set VO's for Advanced Table?

I have Advanced Table which display data from 3 different table under certain conditions.
These 3 tables having same columns but different data.
Here I have defined 3 VOs for this 3 tables.
Now I want to programatically configure this VO to Advanced Table.
Also...How shall i set View Attribute for Column in Advanced Table.
I have written following code..but that didnt work...it is in processRequest()
OAAdvancedTableBean tableBean = (OAAdvancedTableBean) webBean.findChildRecursive("SampleTable");
if (tableBean!=null)
System.out.println("Table Bean is Not Null");
tableBean.prepareForRendering(pageContext);
tableBean.setViewUsageName("EMCOpptyLevel1DataVO"); //EMCOpptyLevel1DataVO is name of VO
OAMessageTextInputBean hours = (OAMessageTextInputBean)tableBean.findIndexedChildRecursive("hours1");
hours.setViewUsageName("EMCOpptyLevel1DataVO");
hours.setViewAttributeName("Hours");
am.invokeMethod("initialize");// This will execute query on EMCOpptyLevel1DataVO
}

We have done it in the follwoing way. I have created one VO and this was with qry "select a,b from tab1;"
I have written an public initialize(int condition){} method in VOImpl class. In the initialize method I used to change the qry of the VO something like this
public initialize(int condition){
if condition = 1
     setqry("select a,b from tab1");
     setFullSqlMode(FULLSQL_MODE_AUGMENTATION);
if condition = 2
     setqry("select a,b from tab2");
     setFullSqlMode(FULLSQL_MODE_AUGMENTATION);
Basically, I was using only one VO, but changing the qry on the VO dynamically depending on the condition. Depending on the condition I initialize my VO appropriately.

How to change category on open and closed PO and Requisition lines

We realized a little late that our category definition needs change. But when we change the category definitions (including structure) how do we change the existing PO lines and Requisition lines to have the new categories? We checked for any APIs, but there are none. What other option do we have?

changing the name of the home directory and the login name is not advisable. it can be done
http://www.macworld.com/article/132693/2008/03/changeshortusername.html
but a better way would be to make a new user account using system preferences->accounts. call it whatever you want. log into that and delete the old account. since you just got this computer you don't have any data on it yet, right?

How to distinguish LOVs on different requisition lines? (in advanced table)

Similar Messages

Maybe you are looking for