How to distribute Leads generated through ELM

Hi guys
I was creating Leads thorugh ELM,well i was able to do the same but now i am facing the problem about how to distribute these Leads to different employees within the organisation for further processing.
In the Org strucutre i have maintained there is one position MTMs to which Leads which are generated in mass by ELM should be distributed.
now what should be a logic that will decide that which Lead will be distributed to particular MTM,
any ideas??m pretty stuck right now on this
Please Reply
any help will be apprecitaed
i am working on CRM version 5.0
best regards
ashish

For the generation of leads you use ELM, but for the routing there are 2 ways depending on the volume of transactions :
1. Partner determination procedures and manual creation of the document. (the partner is determined automatically)
2. Rules & Batch Jobs. The document is created automatically and the partner is defined automatically.
For more information on the step 2 pleas look at : http://help.sap.com/saphelp_crm50/helpdata/en/43/0f899d9f2a6f3fe10000000a422035/frameset.htm
If you have a lot of transaction to route, I would recommend to use the second option, but the set-up cost (in terms of resources) is higher. On the other hand you can quickly and easily set-up the first option, where you don't have to maintain or control anything.
BR,
Cenk SEZGIN

Similar Messages

How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.

How to display or generate PDF417 barcode dynamically in PDF form? I am using Acrobat XI Professional and there is a Bar Code Field in the same through which I generated the same. But I want to generate the same dynamically.

What do you mean by dynamically? When yo set up a 2D bar code field you specify which field name/value pairs you want to include, along with other parameters. But be aware that they won't work with Reader unless you Reader-enable the document with LiveCycle Reader Extensions and include the bar code usage right. It will work with Acrobat Standard/Pro.

I have multiple email accounts. One is a google email and another aol. I have the aol going into my google. I Now Go Lead Generate! Am using outlook on my pc. How can I get my outlook to share with my ipad?

I have multiple email accounts. One is a google email and another aol. I have the aol going into my google. I Now Go Lead Generate! Am using outlook on my pc. How can I get my outlook to share with my ipad?

In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account. The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
Ernie

How can we default a Purchase Organisation in the PR generated through MRP

Hi,
How can we default a Purchase Organisation in the PR generated through MRP
(This is a Auto generated PR when the MRP Run is taken)
We take a MRP Run for CBP. After the MRP Run system Auto generates a PR. But this PR does not have the P.organisation mentioned in it. It has to be done manually.
How can we Default the P.Organiastion in the PR.
NS

The Purchasing Organization is only filled in the Purchase Requisition
when a source is assigned because it represents a source of supply.
Please also refer to attached note 206684 for more information.
When executing a MRP-run, it is checked first if there exists a quota
arrangement, the source list is read after it and the purchasing
organization is taken from the source list. But before filling
the relevant field in the purchase requisition (EBAN-EKORG), the
system checks if there exists a record in the source list which is
RELEVANT TO MRP, which means that the parameter 'MRP' has to be set to
'1'.
So please ensure that MRP = 1 in ME01 for the existing records and start
the next planning run with planning mode = 3 and check the results.

Format of CSV file generated through iBot

What is the default format of csv file generated through iBot (UNICODE / UTF) ?
How can we configure a single iBot to generate CSVs, for example, in UTF format instead of UNICODE (assuming UNICODE is default).
-Jimit

Use this
https://support.oracle.com/epmos/faces/ui/km/SearchDocDisplay.jspx?_afrLoop=324436281886916&type=DOCUMENT&id=1459947.1&displayIndex=1&_afrWindowMode=0&_adf.ctrl-state=130oxyc5cv_71
Content:
Goal
Currently the CSV format in Agents always delivers the report results in tab delimited CSV. Is there a setting that can make the report result in a comma delimited CSV format when the reports are setup via Agents/iBots?
Fix
There is no setting that would make CSV output from an iBot be comma delimited as opposed to the tab delimited output from the web UI.
There is an enhancement request for this functionality. for more information, see bug 13802667 - COMMA DELIMITED CSV FORMAT FOR AGENTS/IBOTS has been logged to include this feature in future release.
As a work-around, you can to run a custom script from an Agent to convert tabs to commas. See chapter 4 (http://docs.oracle.com/cd/E21764_01/doc.1111/e18562/schedjobscripts.htm#BABGFBBD) of Oracle® Fusion Middleware Scheduling Jobs Guide for Oracle Business Intelligence Enterprise Edition 11g Release 1 (11.1.1) Part Number E18562-01 for more information on writing custom scripts.
If helps pls mark

How to distribute my windows phone 8 app and windows store app without publishing in the store

How to distribute my windows phone 8 app and windows store app without publishing in the store
any business license or enterprise license needed..
I am a windows developer talking behalf of my company i.e wipro
I have a question about the enterprise license and we are building an app for the limited users i.e our company employees and users and we do not want to publish in the store
How to release the app?
what are licenses etc needed?

Hi,
for developers distributing apps without Publishing in the Store, the sideloding Enterprise key license through volume licensing is required.
Starting May 1, 2014, customers who want to enable sideloading will be able to purchase an Enterprise Sideloading key for $100 through the Open License program.
An unlimited number of devices can be enabled for sideloading using this key.
thanks
diramoh

How to reverse Document generated by Interest Calculation programme.

Hi Gurus,
Any idea how to reverse the document posted by the batch session generated through Interest calculation programme other than manual journal?
Moreover If I am running interest calculation for 10 different GL accounts which post to one Clearing B/L sheeet account, how to recognise which posting belongs to which account?
Thanks,
Pritam

Hello,
What's your SAP version? I can see it on FINTSHOW transaction. You can select running node and press reverse posting.
This button before the Reprinting button on ALV sreen. Reverse posting's shortcut is CTRL+F12
Regards,
Burak

How to default distribution account through purchase requisition, selecting the project expenditure type

Dear All,
How to default distribution account through purchase requisition, selecting the project expenditure type
Thanks
Abdul.

Hi Abdul,
If you meant defaulting Purchase Order distribution accounts from the (backing) requisition, then the accounts from requisitions will default into the autocreated PO.
If you seek to default distribution accounts for Purchase Requisition using Projects, then the account generator need to have customized rules defined to default account for project enabled distributions based on the Project/Task/Organization/Expenditure Type/Date combination entered.
This note is an extract from the user's guide, and has good detail on defaulting rules of accounts for Purchase Documents:
How Does The Account Generator Default The Accounts In Oracle Purchasing? (Doc ID 1067139.1)
Hope this helps.
Vanha

How to cancel Invoice generated thru ERS

Hi all,
Please tell me how to cancel an invoice that is generated through ERS process.
This is very urgent. Please help me.
Ganesh.

Hi,
In the transaction to generate and the ers invoice (MRRL), you have to mark the posts that you want to erase and press "save" button.
I don't think you can do it through MR8M but you can try it.
Hope it helps.
Regards

SAP PI calling the webservice generated through BRF+

Hi All,
The scenario is
SAP ECC(IDoc) --> PI --> SAP MII
. The data coming from ECC in the IDoc will be in a third party format, but we want MII to receive data in SAP format.
For this we have decided to use BRF. I want to know that how can I use the webservice which we generate from BRF in SAP PI. Which adapter supports calling of webservice or if there is any other section of SAP PI where this transformation can be done using BRF+ webservice? Please help
Thanks,
NehaSingh

Hi,
The message coming from ECC has values in ISO format and MII needs values in SAP format. For this conversion to happen I need to use the BRF+ and when I raised the same request on "Business Rule Management/BRF+" forum. I got the following reply.
ht[Re: Calling web service generated through BRF+ in SAP PI|Re: Calling web service generated through BRF+ in SAP PI]
Now, Can anyone please help me with answers to following question:
Since my Source Message is an IDoc, I cannot directly use the RFC that will call the Function Module that I require for format conversion,
Can I use RFC Lookup to satisfy the requirement. If yes how to go about it. Actually I am using RFC LookUp for the first time, so the basic steps that we need to follow for RFC Lookup are needed. I went through some Blogs but did not understand how it will be applicable in my case. Please Help
Thanks and Regards,
NehaSingh

Service PR generated through maintenance order

Hi Friends,
I am creating a maintenance order in which i am using external services(Control key PM03).
The PR is getting generated, but delivery date in the PR is not editable or modifiable its greyed out.
How to make the field editable.
please advise
Thanks in advance
Vivek
Edited by: vivek mankad on Jan 27, 2009 5:05 AM

Hi Friends,
We have solved the problem using the user Exit. If you want to change the delivery date in the PR generated through maintenance only option is through user exit. Even if you use user exit the field will not be modifiable. What we did was we created a new field where we maintain the delivery date and used the user exit COZF0001 to pick the date from the field. Now whatever date is entered in that field will be displayed in the PR.
Thanks a lot guys.
Vivek

Email generated through a smartform

Hi all,
How can I add text in the body of the email generated through a smartform.
Thanks

Hi Sushant,
Please check whether the given links are of any use to you,
Add text to body of email generated from Action
Change Body Text in Service Desk email
Best Regards.
Reward points if it is useful.

How to distribute equal spacing with anchor points?

I am working in Lesson 5 of Adobe Illustrator CS5 Classroom in a Book, and am having a problem selecting the 2 anchor points to distribute equal space based on the bottom center anchor point of the violin. The note said to reference chapter 2, which I have already been through, but even after reading the Illustrator Help dialog on pg 75, I am still at a loss. Can anyone explain how to distribute this equal spacing of 2 anchors relative to one anchor point?

csnpreggers,
If anyone has any further advice or comment, I'd still love to hear from all parties.
Especially when working with a finished symmetrical shape, such as a violin, which may have been created using mirroring, in other words elaborating on a shape, possibly with something unforeseen in the first round, and especially when it is inconvenient to cut paths to work with one half, you may use the instructions in small print using invisible ink at the bottom of item 3 in lesson 5:
2 tips, using the Line Tool and Smart Guides:
To make sure the left Anchor Point has the same same distance from the bottom Anchor Point, first ShiftDrag horizontally with the Line Segment Tool from the right Anchor Point to cross the path, then select the violin path and click it with the Add Anchor Point Tool where Smart Guides say intersect.
Or to place both Anchor Points at the same time instead, first create a sufficiently long horizontal path with the Line Segment Tool below the violin path, then ShiftDrag it upwards to cross the violin path at the desired distances, then select the violin path and click it with the Add Anchor Point Tool where Smart Guides say intersect, both right and left.

How to install .xpi extension through installjammer?

How to install .xpi extension through installjammer in firefox?

You have not given details of your OS, version of Firefox, or what you are actually installing. Presumably you intend developing and distributing something for Firefox, and installing this using installjammer
* http://en.wikipedia.org/wiki/InstallJammer
This is not within the scope of this forum. I suggest you try elsewhere. Perhaps you may be able to discuss this on one of the the Add-ons fora
* https://forums.mozilla.org/addons/
P.S. I note your last question was regarding installing a .xpi using the comandline [/questions/969832]

How to distribute App Store Link before going live?

I'm new to the Itunes Connect process, and am wondering how to distribute my App Store Link before going live. My App is approved and is scheduled to launch on the App Store on September 15th. I'm about to send correspondance out to the various online review sites, but am missing this one important link that I need to supply to them.
Itunes Connect is currently Down for Scheduled Maintenance. Do I find the link there? I do have my App ID and SKU. Can I extrapolate the link based on these?
Any insight would be appreciated!

>Can I extrapolate the link based on these?
Not that I'm aware of, no.
Find the app's store id number in iTunes Connect, then use http://itunes.apple.com/linkmaker/ - this site will generate a link with a button based which book, app, song, podcast etc. you search for in the store.

How to distribute Leads generated through ELM

Similar Messages

Maybe you are looking for