How to divide the network, limit bandwidth on RW110?

Hello,
I have a problem with 2 users in the home network who overuse the internet. They constantly watch YouTube with Pandora turned on or other streaming content.
We have RW110. How can I limit their bandwidth, so when they use the internet they do not block other users?
Thanks!

Hi Kamil, unfortunately you can't on this product. The bandwidth limit is from LAN to WAN. Not WAN to LAN. You can limit upload rates but that wouldn't do you much good.
-Tom
Please mark answered for helpful posts

Similar Messages

How to get the network details in flex4.5 web application

How to get the network details in flex 4.5 web application
similar to the nativeinterface in air application

checkout this document for secure web application
http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf6167e-7fff.html

Who knows: How to divide the request.getInputStream()?

I use a form in a web page to update files, the form code is
<form action="/Mywork/servlet/fileupdate1" method="post" enctype="multipart/form-data">
<p>
Please select a file1 to upload: <input type="file" name="foo">
</p>
<p>
Please select a file2 to upload:<input type="file" name="foo1">
</p>
<input type="submit" value="Upload File!">
</form>
and the "fileupdate1" servlet which the "action" in the form tag refers to will get the inputstream by
"ServletInputStream servIn = request.getInputStream();", and create new OutputFileStream in the disk. But
new files which the servlet stored always have some additional codes "
-----------------------------7d419320202be
Content-Disposition: form-data; name="foo"; filename="H:\Documents and
Settings\administrator\desktop\ee.java"
Content-Type: application/octet-stream
If I updating two files, each file will has these kinds of codes and the two files only have one inputstream. I don't
how to remove these additional codes and how to divide the stream into pieces according to the updated-file-size.
I don't know wether I say it clearly?And
does anyone know the reasons and can help me?
Thank you very much.

Use something like Jakarta Commons FileUpload to process the multipart/form-data request:
http://jakarta.apache.org/commons/fileupload/

How to divide the request.getInputStream()?

I use a form in a web page to update files, the form code is
<form action="/Mywork/servlet/fileupdate1" method="post" enctype="multipart/form-data">
<p>
Please select a file1 to upload: <input type="file" name="foo">
</p>
<p>
Please select a file2 to upload:<input type="file" name="foo1">
</p>
<input type="submit" value="Upload File!">
</form>
and the "fileupdate1" servlet which the "action" in the form tag refers to will get the inputstream by
"ServletInputStream servIn = request.getInputStream();", and create new OutputFileStream in the disk. But
new files which the servlet stored always have some additional codes "
-----------------------------7d419320202be
Content-Disposition: form-data; name="foo"; filename="H:\Documents and
Settings\administrator\desktop\ee.java"
Content-Type: application/octet-stream
If I updating two files, each file will has these kinds of codes and the two files only have one inputstream. I don't
how to remove these additional codes and how to divide the stream into pieces according to the updated-file-size.
I don't know wether I say it clearly?And
does anyone know the reasons and can help me?
Thank you very much.

Well, if you know the format, you'd know that the file data starts after the first blank line (\r\n\r\n).
But why don't you just use Jakarta Commons File Upload or some other existing free package to handle multipart forms and save yourself the trouble.

How to reset the network IP address from terminal/command line in Mac OSX?

Do anyone knows how to set the network IP address from terminal/command line in Mac OS X?

how about a GUI, ever heard of a GUI? it's this really neat thing, where you don't have to worry about remembering long strings of text to do something. Mac OS X actually has a rather decent one (that was sarcasm by the way, Mac is the best) you could have it done in like 30 sec, if you use the network pane of system preferences.

How to divide the partitions in AIX 5L

Hi Guru's
Friends i am installing AIX 5L, How to divide the partitions in AIX5L
please tell me if anybody know.
Thanks

What kind of partitions do you mean? Do you mean logical partitions?
Message was edited by:
Ivan Kartik

How to divide the CRM transaction data by company cord?

How to divide the CRM transaction data by company cord?
CRM transaction have not company cord, so how to divide the data on BI report by company cord?
Do I have to get the sales organization from customer master?
Some transactions have not master data like lead. I want to know your experience.

Hi
This is self reply.
I should use the sales organization instead of company cord.
But some business like lead from contact from customer can not separate the company, in situation one call center for multiple companies.
We should use another field to divide the company. Ex. Product, campaign, etc.
If someone knows better way to solve this issue, let me know the reply.
Regard
u1

How to divide the iview into frames?

Hi Experts,
Please tell me how to divide the iview into frames.Kindly provide the steps.Its urgent.
Regards,
Nutan

Hi Nutan,
Now its clear!!
If I understand right. You want an overview page full of links to go to your different pages?
Or maybe you want a link form each page to go to another page?
In Portal Navigation through hyperlinks is possible.
You can either do that using EPCM.doNavigate("ROLES://...") {check for EPCM API of help.spa.com}
Or you could do that by simple
<a href="http://www.sdn.sap.com/irj/portal/myql">CLICK</a>
{check for Quicklinks on help.sap.com}
Either way you'll have to make a small JSP for that.
Hope this helped
If so kindly reward with points
Prem

How to change the Max limit in the Ring

Hi all,
I am try to use a Ring to set up 4 different of Freq form 18Hhz to 20Ghz but the ring Max limit only 65535. How could I change the max limit? Or any way we could set up 4 diffirence Freq number for user select any one they want to use.
Thank you
Solved!
Go to Solution.

you could use a case structure and wire your ring control to it and then send the frequency you from the case structure
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome

How to change the network name and line name on iPad 4?

Could anybody help me how to fix this problem?
Previously I used qb (a mobile network in Cambodia) for my iPad 4 (iOS 7.0.4 non-jailbreak) the network name is qb.
The problem is that after I changed to use SMART (another mobile network in Cambodia) for this iPad the network name is still in QB and the Line name changed to SMART.
I don't know how to fix it now.
I have tried many methods as in restore through iTunes, reset network setting, reset all setting... but I still could not get the solutions.
I do hope to get it fix through all your experience.
Regards,
Panharith

Hi Anikesh
using SU01..u can change the password but can't see the old password..
Hope this helps, reward with points if it does...;-)
Regards,
Tejas

HOW TO DIVIDE THE COST PER MONTH IN CONTRACT WHICH IS PER YEAR

Dear all,
i am triggring a project with reference to a quotation and i get the planned cost in
of the project in my quotation.So this cost of the quotation is for a year assuming the duration of the project is one year.
i am copying a contract document from this quotation in which the monthly billing
plan is there.here it is again multiplying for 12 months whereas i want it to divide it
by 12.can some body throw light for me to get a solution for this problem.
Assured reward points for timely support
Best regards,
R.Srinivasan

I think the answer is very simply that you should be using a 'milestone' billing plan rather than a 'periodic' billing plan. The milestone billing plan divides the total net value of the line into the milestones determined by the milestones in your WBS element, network, manually maintained in billing plan screen, or from a reference milestone billing plan. The periodic billing plan instead creates a billing periodically for the entire net value which in essence multiplies the amount by the number of billings in your plan.
You mentioned cost. If you want to divide cost across the term of the contract, you will need to look at CO functionality such as networks, service orders, RA, or other cost planning and accrual tools.
If you are trying to bill in accordance with your costs, you need to use resource related billing which can be integrated with milestone billing.

How to configure the network on Sun Solaris 8

The Sun workstation is a license server, and Window NT workstation need to access the license file that located in the sun workstation.
Now the Window NT workstation cannot connect with the sun solaris, and I guess that I need to configure the network on Sun Solaris 8.
Could you please tell me how to do that step by step?
If there is the system tool like the window system to configure the network easily and quickly.
I appreciate it.
Mark

If your sun system is working then probably it has network configured already .You can check it by the following command on the sun.
ifconfig -a
Generally applications asks where license server is located and you need to give the ip-address or host name only . Application docs will give more detail about it.
You can get ip-address from ifconfig comand above.
Hemant Sharma
http://www.adminschoice.com

How to Identify the Network Topology being used for a running ForeFront TMG Stand Alone array?

Hello Experts,
My client has decided to move their datacenter from one location to other including the ForeFront TMG servers which are being used as Reverse Proxy and TMG Gateway in DMZ environment.
I need to know the network topology used for this configuration so that I could chose the same topology when creating new TMG environment at new datacenter. Here are some details :
1. There are 2 TMG servers configured in a DMZ Workgroup in Stand Alone array.
2. Both servers have 3 NIC attached to them. (one has all public IPs configured, another one has internal IP address and the third one has Management IP which is used to connect the server via RDP).
3. There are more than 50 websites published via this standalone array.
I am very new to Forefront TMG technology and need to know the Topology used to create such environment.
Thanks
Lalit

Hi,
According to your description, you can use the 3-leg perimeter network template and choose which network adapter connects to the LAN, which network adapter connects to the external network and which network adapter connects to the DMZ.
Did you set up TCP/IP settings for the three NICs? If not, please refer to the link below:
Recommended Network Adapter Configuration for Forefront TMG Enterprise Edition Servers
More information:
Microsoft Forefront TMG – How to use TMG network templates (Note:
Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.)
Best regards,
Susie

How to divide the UWL tasks listed in "Tasks" in different views ??

Hello, i want to divide the tasks listed in the UWL in different iviews depening on whether they are tasks from the R3 workflow, tasks from the KM or tasks from the guided procedures ; in other words, i don´t wank one iview showing all the tasks together. I want to show just tasks from R3 workflow in one iview, task from the km in another and tasks from guided procedures in another.
How can achieve this?
Thanks in advance!.

Hi Themis,
well, you could use the concept of configuration groups. You can assign every UWL system to none, one or multiple configuration groups (see <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/92/a88931f2dd4631b9e8d530697d89c9/frameset.htm">SAP Library</a>). The UWL iView can be limited to show only work items from systems in a given configuration group.
I suggest that you assign your backend systems (KM, SAP Business Workflow, etc.) to different configuration groups (you can choose the names of the configuration groups arbitrary). Afterwards, create a few UWL iView instances and set the iView property "System Configuration Group" accordingy.
Best regards,
Martin

I did the network reset on my iPhone and I lost my carrier...I have no network and I don't know how to restore the network setting on the iPhone because I resetted it to factory setting

I did the network reset on my iPhone and I lost my network carrier totally it returned to factory settings mode how do I recover my network settings??

If you were required to manually enter your carrier network settings on the iPhone, you need to contact your carrier.

How to divide the network, limit bandwidth on RW110?

Similar Messages

Maybe you are looking for