SAP R/3 basics

Hello All,
I am new to Enterprise Resource Planning and SAP R/3 software in particular.
Does anyone have a document explaining the basics of how a SAP R/3 system works? e.g. How does R/3 store data, what are tables and why are they used, what are documents and how are they used, how is R/3 structured etc.
Many thanks and kind regards,
Keith

Hi Keith,
You can use the following link to understand the basics of R/3.
http://cma.zdnet.com/book/abap/ch01/ch01.htm
For understanding the different tables used in SAP, go the below link and click on the relevant Module.
http://www.sapgenie.com/abap/tables.htm
Reward points if found useful.
regards,
Raj
Message was edited by: Rajagopal G

Similar Messages

  • SAP Business Objects - Basic Guidance

    Hi Guys,
    I am working on SAP BI from the last 6 months and I know how to design a model in BI...extract data and create reports in BI.
    Now, our company has purchased Business Objects and I have to deliver the reports in the same..
    I have installed all the software which is required and now I have to do reports in SAP BOBJ.
    So..Can you pl.guide me and is there any guidance material on ow to create reports .
    As far as I know...there r three ways to create reports...
    crystal reports
    Dash Boards
    WEBI Reports.
    Is that correct? If it is...can u pl.let me know the steps for each one of them...
    If not..pl.let me know the different types of reports in Business Objects and the steps for each one of them...
    I really apprecitate if some one can help me out in this...

    Hi,
    Here are few links...
    Save them in your favorite or download to your computer.
    BusinessObjects Enterprise InfoView User Guide
    [http://help.sap.com/businessobject/product_guides/boexir31/en/xi3-1_bip_user_en.pdf]
    Building Reports Using the Web Intelligence Java Report Panel
    [http://help.sap.com/businessobject/product_guides/boe65/en/webintelligence.pdf]
    Crystal Report2008 User's Guide
    [http://www.businessobjects.com/jump/xi/gettingstarted/users_guide_cr2008.pdf]
    Crystal Xcelsius User Guide
    [http://resources.businessobjects.com/support/cx/samples/learning/downloads/xcelsius_pro_userguide_en.pdf]
    Wish you Good Luck...
    Bashir Awan

  • SAP BIW presentation - very basic

    Hi Experts,
    Can anyone help me out by sending a presentation on SAP-BIW (very basic ppts)?
    Mail-id: [email protected]
    Or give link in ur replies, points are assured.
    Thanks & Regards,
    Rachit.

    Hi experts,
    For me also SAP  -BW  ppt is needed. But i am not having official mail id.
    Just i am giving my gtalk account. now i am in online. [email protected]
    Anybody can send that one through gtalk.
    Thanks,
    Sankar M

  • SAP J2EE Engine has stopped working suddenly

    Hi,
    I have only SAP J2EE stack in WebAs installed on a machine couple of months ago and all the while it was working fine.But suddenly one day (precisely monday)i see that  J2EE Server node is not starting up. But the central instance (which has processes MsgServer.exe,Enserver.exe) has started sucessfully but not the server node instance.
    I am getting the following error in the log file
    <-- Error log message starts here----
    >
    [Thr 3108] Tue Nov 15 11:53:06 2005
    [Thr 3108] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx.c   1433]
    [Thr 3108] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
    [Thr 3108] JControlCloseProgram: started (exitcode = 66)
    [Thr 3108] JControlCloseProgram: good bye... (exitcode=66)
    <-- Error log message starts here----
    >
    <- Trace error message starts here-->
    #1.5#000E0C6021FB00000000001200000614000405862C538277#1131973734265#com.sap.sql.jdbc.NativeConnectionFactory##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[Thread-1,5,main]##0#0#Error#1#/System/Database/sql/jdbc#Java#com.sap.sql_0002##SQL error occurred on connection jdbc:datadirect:sqlserver://blrkecsaptst1:1433;databasename=J2E: code=18,456, state="28000", message="[DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SAPJ2EDB'.
    => (0,08001,[DataDirect][SQLServer JDBC Driver]An error occurred while attempting to log onto the database.)".#5#18456#28000#[DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SAPJ2EDB'.
    => (0,08001,[DataDirect][SQLServer JDBC Driver]An error occurred while attempting to log onto the database.)#jdbc:datadirect:sqlserver://blrkecsaptst1:1433;databasename=J2E#<null>#
    #1.5#000E0C6021FB00000000001300000614000405862C5392D1#1131973734265#com.sap.sql.jdbc.NativeConnectionFactory##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[Thread-1,5,main]##0#0#Error##Plain###java.sql.SQLException: [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SAPJ2EDB'.
         at com.ddtek.jdbc.base.BaseExceptions.createException(Unknown Source)
         at com.ddtek.jdbc.base.BaseExceptions.getException(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSLoginRequest.processReplyToken(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
         at com.ddtek.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
         at com.ddtek.jdbc.base.BaseConnection.connect(Unknown Source)
         at com.ddtek.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
         at com.ddtek.jdbc.base.BaseConnection.open(Unknown Source)
         at com.ddtek.jdbc.base.BaseDriver.connect(Unknown Source)
         at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:219)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:570)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:263)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:294)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:123)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
         at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:147)
         at com.sap.engine.core.configuration.impl.ConfigurationHandlerFactoryImpl.<init>(ConfigurationHandlerFactoryImpl.java:30)
         at com.sap.engine.core.configuration.impl0.ConfigurationManagerImpl.initInternal(ConfigurationManagerImpl.java:180)
         at com.sap.engine.core.configuration.AbstractConfigurationManagerImpl.init(AbstractConfigurationManagerImpl.java:170)
         at com.sap.engine.core.Framework.loadSingleManager(Framework.java:396)
         at com.sap.engine.core.Framework.loadManagers(Framework.java:163)
         at com.sap.engine.core.Framework.start(Framework.java:97)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.boot.FrameThread.run(FrameThread.java:58)
         at java.lang.Thread.run(Thread.java:534)
    #1.5#000E0C6021FB00000000001500000614000405862C53DC14#1131973734281#com.sap.engine.core.configuration##com.sap.engine.core.configuration#######Thread[Thread-1,5,main]##0#0#Error#1#/System/Server#Plain###Error while connecting to DB.
    =======================================================
    com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:344)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:123)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
         at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:147)
         at com.sap.engine.core.configuration.impl.ConfigurationHandlerFactoryImpl.<init>(ConfigurationHandlerFactoryImpl.java:30)
         at com.sap.engine.core.configuration.impl0.ConfigurationManagerImpl.initInternal(ConfigurationManagerImpl.java:180)
         at com.sap.engine.core.configuration.AbstractConfigurationManagerImpl.init(AbstractConfigurationManagerImpl.java:170)
         at com.sap.engine.core.Framework.loadSingleManager(Framework.java:396)
         at com.sap.engine.core.Framework.loadManagers(Framework.java:163)
         at com.sap.engine.core.Framework.start(Framework.java:97)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.boot.FrameThread.run(FrameThread.java:58)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.sql.SQLException: [DataDirect][SQLServer JDBC Driver][SQLServer]Login failed for user 'SAPJ2EDB'.
         at com.ddtek.jdbc.base.BaseExceptions.createException(Unknown Source)
         at com.ddtek.jdbc.base.BaseExceptions.getException(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSLoginRequest.processReplyToken(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
         at com.ddtek.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
         at com.ddtek.jdbc.base.BaseConnection.connect(Unknown Source)
         at com.ddtek.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
         at com.ddtek.jdbc.base.BaseConnection.open(Unknown Source)
         at com.ddtek.jdbc.base.BaseDriver.connect(Unknown Source)
         at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:219)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:570)
         at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:263)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:294)
         ... 15 more
    #1.5#000E0C6021FB00020000000000000614000405862C5494F7#1131973734328#com.sap.engine.core.cluster.impl6.JoinPortListener##com.sap.engine.core.cluster.impl6.JoinPortListener.run()#######SAPEngine_Application_Thread[impl:3]_32##0#0#Error##Plain###java.lang.NullPointerException#
    #1.5#000E0C6021FB00020000000100000614000405862C5497CD#1131973734328#com.sap.engine.core.cluster.impl6.JoinPortListener##com.sap.engine.core.cluster.impl6.JoinPortListener.run()#######SAPEngine_Application_Thread[impl:3]_32##0#0#Error##Plain###java.lang.NullPointerException
         at com.sap.engine.core.cluster.impl6.ClusterManagerImpl.getClusterMonitor(ClusterManagerImpl.java:2254)
         at com.sap.engine.core.cluster.impl6.JoinPortListener.waitForThisElementConstruction(JoinPortListener.java:120)
         at com.sap.engine.core.cluster.impl6.JoinPortListener.access$000(JoinPortListener.java:30)
         at com.sap.engine.core.cluster.impl6.JoinPortListener$SocketProcessor.run(JoinPortListener.java:137)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
    <--Trace error message ends here--->
    I have't not changed any passwords of db users like SAPJ2EDB but i don't know why i am getting this error suddenly.
    Can anyone throw light on this issue.
    Thanks and Regards,
    Satish

    Hi Detlev,
    The DB (SQL 2000) is started and i have verified through
    Window service console and SQL Server Service Manager.
    Even the Config tool (i.e offline tool) is throwing the following error message when started.
    ""PATHHASH" = ?#
    #1.5#C000AC19E95B000100000008008420AE0004059711CA16E0#1132046303500#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Error#1#com.sap.engine.core.configuration#Plain###[DataDirect][SQLServer JDBC Driver][SQLServer]Invalid object name 'J2EE_CONFIG'.
    =======================================================
    java.sql.SQLException: [DataDirect][SQLServer JDBC Driver][SQLServer]Invalid object name 'J2EE_CONFIG'.
         at com.ddtek.jdbc.base.BaseExceptions.createException(Unknown Source)
         at com.ddtek.jdbc.base.BaseExceptions.getException(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRPCNonCursorExecuteRequest.submitPrepare(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRPCExecuteRequest.doPrepExec(Unknown Source)
         at com.ddtek.jdbc.sqlserver.tds.TDSRPCExecuteRequest.execute(Unknown Source)
         at com.ddtek.jdbc.sqlserver.SQLServerImplStatement.execute(Unknown Source)
         at com.ddtek.jdbc.base.BaseStatement.commonExecute(Unknown Source)
         at com.ddtek.jdbc.base.BaseStatement.executeQueryInternal(Unknown Source)
         at com.ddtek.jdbc.base.BasePreparedStatement.executeQuery(Unknown Source)
         at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeQuery(BasicPreparedStatement.java:97)
         at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:270)
         at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:241)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.getConfiguration(DBAccessDefault.java:578)
         at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:102)
         at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:62)
         at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:879)
         at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:913)
         at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.openConfiguration(ConfigurationCache.java:783)
         at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.openConfiguration(ConfigurationHandlerImpl.java:694)
         at com.sap.engine.configtool.batch.Scanner.scan(Scanner.java:44)
         at com.sap.engine.configtool.visual.ConfigTool.loadClusterData(ConfigTool.java:100)
         at com.sap.engine.configtool.visual.ConfigTool.initScan(ConfigTool.java:86)
         at com.sap.engine.configtool.visual.ConfigTool.scanAction(ConfigTool.java:237)
         at com.sap.engine.configtool.visual.ConfigTool.actionPerformed(ConfigTool.java:209)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
         at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
         at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
         at java.awt.Component.processMouseEvent(Component.java:5100)
         at java.awt.Component.processEvent(Component.java:4897)
         at java.awt.Container.processEvent(Container.java:1569)
         at java.awt.Component.dispatchEventImpl(Component.java:3615)
         at java.awt.Container.dispatchEventImpl(Container.java:1627)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
         at java.awt.Container.dispatchEventImpl(Container.java:1613)
         at java.awt.Window.dispatchEventImpl(Window.java:1606)
         at java.awt.Component.dispatchEvent(Component.java:3477)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
    #1.5#C000AC19E95B000100000009008420AE0004059711CA16E0#1132046303500#/System/Logging##com.sap.tc.logging.FileLog.[setFormatter()]#######Thread[AWT-EventQueue-0,6,main]##0#0#Warning##Java#SAP_LOGGING_FORMATTER_ERROR##Trying to change a formatter on active log ! The reset() method must be first called!#1#.
    system.log#
    #1.5#C000AC19E95B00010000000A008420AE0004059711CA5178#1132046303515#/System/Server##com.sap.engine.core.configuration#######Thread[AWT-EventQueue-0,6,main]##0#0#Info#1#com.sap.engine.core.configuration#Plain###Properties for connect through secure store not set. Please check your connect properties. Trying to connect via plain user/password.#
    #1.5#C000AC19E95B00010000000B008420AE0004059711CA5178#1132046303515#/System/Database/sql/jdbc##com.sap.sql.jdbc.NativeConnectionFactory#######Thread[AWT-EventQueue-0,6,main]##0#0#Error#1#com.sap.sql.jdbc.NativeConnectionFactory#Java#com.sap.sql_0015#com.sap.sql.log.OpenSQLResourceBundle#Value "" is not allowed for parameter .#2#url##
    1)is it due to mismatch of the passwords of the user SAPJ2EDB in database and J2EE Engine and Securestore of config tool
    2)is there some DB related problem ?
    3)i think the problem is similar to this one
    Netweaver's WebAS SDM process goes corrupt, exitcode=66
    But the solution there is not so clear
    4)After i changed the password both in the database as well as in configtool >Secure Tool>/jdbc/pool/J2E/password..but i am getting java.sql.SQLException: [DataDirect][SQLServer JDBC Driver][SQLServer]Invalid object name 'J2EE_CONFIG' this error.
    Any idea on what needs to be done to fix this problem
    Regards,
    Satish

  • Stock Aging report in SAP Business One

    Greetings,
    I don't think this issue has been raised successfully on the forums (i checked, there's no real resolution at the moment).
    The end user requires some form of stock aging that their auditors deem important but there's no such feature within SAP B1.
    Their basic requirements would be:
    Stock Code | Description | Date of Purchase | Current Month (qty) | 30-90 Days (qty) | 91-120 Days (qty) | 120 days and above (qty)
    I'm wondering if this is even possible with the end user using multiple warehouses to stock their inventory, and some items are marked as serial items and others are marked as batch.
    Any ideas?

    Thank you for pointing me in the right direction. Amended your query a little so the user input square brackets are there.
    SELECT T0.ITEMCODE , T0.ONHAND as 'Total Qty', CASE WHEN Datediff(day, T1.LASTPURDAT,GETDATE())<45 THEN T0.ONHAND END '<45 Days(Qty)', CASE WHEN Datediff(day, T1.LASTPURDAT,GETDATE())<45 THEN T0.ONHAND*T0.AVGPRICE END '<45 Days(Value)', CASE WHEN DateDiff(day, T1.LASTPURDAT,GETDATE()) >= 45 AND DateDiff(day, T1.LASTPURDAT,GETDATE()) < 90 THEN T0.ONHAND END '45 to 90 Days(Qty)'  , CASE WHEN DateDiff(day, T1.LASTPURDAT,GETDATE()) >= 45 AND DateDiff(day, T1.LASTPURDAT,GETDATE()) < 90 THEN T0.ONHAND*T0.AVGPRICE END '45 to 90 Days(Value)', CASE WHEN Datediff(day, T1.LASTPURDAT,GETDATE()) >= 90 THEN T0.ONHAND END '>90 Days(Qty)', CASE WHEN Datediff(day, T1.LASTPURDAT,GETDATE()) >= 90 THEN T0.ONHAND*T0.AVGPRICE END '>90 Days(Value)'
    FROM OITW T0 INNER JOIN OITM T1 ON T0.ITEMCODE = T1.ITEMCODE INNER JOIN OITB T2 ON T1.ITMSGRPCOD=T2.ITMSGRPCOD WHERE T0.ONHAND>0 AND T0.WhsCode ='[%0]'
    AND T2.ITMSGRPNAM = [%2]
    Will continue to review the aging issue and maybe even update the forums with the results.
    I can understand why in the query you've provided above its not really feaseable to have the Date of Purchase because its showing the stock quantity in total (which would make more sense instead of each item row by row)
    Edited by: Davinder Singh on Apr 18, 2008 4:38 PM

  • Creation of EDI 820 for outgoing payments in SAP

    Hi Experts,
    We have a requirement where in we need to create an outgoing  payment file in EDI820 with in SAP.
    We basically need to create specifications in EDI820 format for the bank to print checks and make wires and EFT payments.
    That EDI820 file will be created at the time of Automatic Payment Run(F110).
    Right now our client is sending a flat file to external service provider and they are creating EDI820 files and sending to the banks. Going forward the services of this service provider will be decommissioned and  an EDI820 file is to be generated in SAP and sent to the bank via SWIFT Net.
    Bank has provided us a sample file and file format for EDI820. This file format contains ST, BPR, RMR, REF etc records. There records have different codes and qualifiers.
    As far as we have analyzed, there are no standard SAP programs that can generate flat file in the EDI 820 format. Therefore we are heading towards developing a Z program for creating an EDI820 format.
    We are facing problem in mapping this file with SAP fields. We need to know how exactly we can map this file in SAP so as to create a program to generate EDI820. If anybody has had a similar requirement (for creating outbound EDI820 in SAP) and can provide us some lead, it will be greatly helpful for us.
    Thanks in advance for the help!

    Have you worked on this requirement?
    Could you please provide step by step instructions to configure and the high level process?

  • Z search field in standard sap program

    Hi,
    I would like to ask if Z search field can be created in the standard SAP program.
    Basically I need modify the search field used when searching for Business area in creation of asset master data (tr. AS01).
    It shows the list of table tgsbt.  But I would like to exclude by default some rows of the table and also would like to sort it in different way (by text).
    Is that possible, if so, could anyone give me a hint how to do that?
    Many thanks,
    Honza

    Hi Jan,
    Please go thorugh the below link.
    http://wiki.sdn.sap.com/wiki/display/Snippets/ImplementingSearchHelp+Exits

  • How to add custom authorization object to a SAP standard transaction

    Hi All,
    I have a standard tcode IW22 (change PM Notification) and I would lock changing when some users modify the field Functional Location (field TPLNR).
    Since this field does not have an authorization object associated, I've tried to solve this problem with the following steps:
    - tcode SU20 - creation of new authorization field TPLNR with data element TPLNR
    - tcode SU21 - creation of  a new auth object in transaction SU21 with name ZPM and field (TPLNR, ACTVT and TCOD)
    - tcode SU24 - insert of new authorization field e check indicator (green)
    - tcode SU22 - check indicator - check (green)
    After this we have created a new role with PFCG and add transaction IW22; the new auth.ZPM was added manually.
    We have try to analyze log (ST01 trace) but it seems no check was made in the trace file.
    It seems new authorization object was not checked.
    My question is: "Is it possible to add a custom authorization object into standard transaction and implementing authorization check without writing abap code in exit or badi ?"
    Thanks
    Maurizio

    > My question is: "Is it possible to add a custom authorization object into standard transaction and implementing authorization check without writing abap code in exit or badi ?"
    >
    No .. not possible. The list of Auth. objects SAP proposed in SU24 for each Stnd. SAP TCodes are basically documentation of the Authority-Checks in the program for that TCode. The extra advantage of SU24 is to set the object status (means the proposal for availability in PFCG) among any of the four check indicators. So that we can provide our own value (customer specific values which are basically defined and separate from sap provided values) and reinforce the authorization concept of the organization.
    So you need to provide a Authority-Check for ZPM in the program of IW22 to make sure that the fields you want to be checked are really being checked during execution of the tcode.
    Regards,
    Dipanjan

  • Creation of EDI 820 fromat for outgoing payments in SAP

    Hi Experts,
    We have a requirement where in we need to create an outgoing  payment file in EDI820 with in SAP.
    We basically need to create specifications in EDI820 format for the bank to print checks and make wires and EFT payments.
    That EDI820 file will be created at the time of Automatic Payment Run(F110).
    Right now our client is sending a flat file to external service provider and they are creating EDI820 files and sending to the banks. Going forward the services of this service provider will be decommissioned and  an EDI820 file is to be generated in SAP and sent to the bank via SWIFT Net.
    Bank has provided us a sample file and file format for EDI820. This file format contains ST, BPR, RMR, REF etc records. There records have different codes and qualifiers.
    As far as we have analyzed, there are no standard SAP programs that can generate flat file in the EDI 820 format. Therefore we are heading towards developing a Z program for creating an EDI820 format.
    We are facing problem in mapping this file with SAP fields. We need to know how exactly we can map this file in SAP so as to create a program to generate EDI820. If anybody has had a similar requirement (for creating outbound EDI820 in SAP) and can provide us some lead, it will be greatly helpful for us.
    Thanks in advance for the help!

    The program that sends the flat file should give you all the necessary fields, selection criteria, etc.  If the third-party constructs EDI820 from it, then there is enough data in that file for you to add steps to create an 820. 
    So, I'd start with the existing program, a particular outbound file and a copy of the 820 file created from it (if that can be obtained) and figure out how the intermediary converted the data to the correct format.  Piece of cake, right?

  • Table fields used for basic key figures in report writer/report painter

    Does anyone know how I can find which <u>table field</u> is actually being used for SAP defined <b>basic key figures</b> in report writer report? For example, <b>HSL</b> is a basic key figure for income statement, library 0F1, report 0F-GUVV. It only shows data is coming from table GLFUNCT. How does the report writer program knows which fields to select? What is the logic behind the basic key figures?
    Any advice is appreciated!!
    Minami

    I have now resolved this issue.
    I had to manually update TablesT804B and T804F. 
    I've added entries to T804A in the past without the need to update T804B or T804F manually so it appears that the way these tables work together has changed following an upgrade or application of support packs.
    Regards
    Mel

  • SharePoint 2013 and SAP connectivity / SAP Gateway for Microsoft and Duet Enterprise 2.0

    Hello,
    we are investigating the connection possibilities of SharePoint 2013 with SAP.
    The basic scenario in our cases involves the transfer of documents and/or metadata from SharePoint to SAP possibly through a Workflow in SharePoint.
    From my research the most promising official (no 3d-party) interfaces that can be used are the Duet Enterprise 2.0 and the SAP Gateway for Microsoft.
    From my understanding both interfaces allow only the consumption of Data from SAP to SharePoint and not vice versa. Moreover the interoperability of documents seems not be supported. Are CRUD operations from a SharePoint native lists to SAP supported?
    Can someone please clarify this topics?
    I have found lots of documentation concerning the interfaces but not a clear answer to this questions.
    Many thanks in advance!
    Ioannis

    Hi Ioannis,
    It seems that there is no built in method to get data from SharePoint list in SAP.
    As a workaround, we can export SharePoint list to excel and then use that spread sheet as a source data in SAP.
    http://scn.sap.com/thread/3467263
    http://scn.sap.com/thread/3472110
    As this issue is regarding to SAP, I recommend you to ask the question in the SAP:
    http://scn.sap.com/welcome.
    More experts will assist you, then you will get more information relation to SAP.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Error sending Idoc's to SAP

    Hi,
    I'm getting error in file-XI-SAP scenario. File is read and transformed to Idoc ok, but then I get this kind of error message in SXMB_MONI:
    <SAP:Stack>Error: Basic type 'HRMD_A01' is unknown</SAP:Stack>
    What I'm I missing in the scenario?

    Hi Tapio,
    Take a look at this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
    Error: No IDocs could be sent to the SAP BW using RFC.
    Hope it helps you.
    Cheers,
    Chandra

  • In solman 4.0 how to send message to SAP through service desk

    Dear all,
            I have configured service desk functionality, My requirement is from service desk how to send message to SAP.
    Regards,
    Pavan.

    Hi,
    Following the steps:
    &#131;Basic configuration - RFC Connections to SAP
    Check if the RFC Connectino SAPOSS is working properly
    Check if load distribution group is set to EWA
    The RFC Connections:
    - SAP-OSS (Send Message to SAP)
    - SAP-OSS-LIST-O01 (Update Message from SAP)
    will be created automatically by the system with a user which has been assigned
    previously.
    IMG Path: SAP Web Application Server | SAP Web Application Server | SAP Solution Manager| Basic Settings | SAP Solution Manager System | Connection to SAP | Assign user for forwarding Service Desk Message
    With transaction SM59 you can adjust the RFC connections.
    - For further information on SAP R/3 Front-end connections, see SAP Notes: 33135, 766505, 24177
    - To forward Service Desk notifications and Issues to SAP, you need to assign a user to the SAPNet R/3
    Front-end connection to SAP.
    Activities:
    - 1. From the SAP Solution Manager (transaction SOLUTION_MANAGER), choose (Edit-> Global Settings.
    - 2. Choose Display<->Change.
    - 3. For SAP Service Marketplace, specify http://service.sap.com as the URL.
    - 4. In the Connection to SAP tab, specify SAPOSS as the RFC destination. Note that the entry is casesensitive.
    - 5. For User forwading messages, enter a valid user and a password. This user will require all the authorizations for SAPNet R/3 Front-end for your customer number.
    - 6. Save your changes.
    The system automatically generates the following RFC destinations and assigns the S-User and password you specified: SAP-OSS, SAP-OSS-LIST-O01
    Good Lucky!

  • Populating SAP Database table using JDBC adapter

    Hi Folks,
        I have a requirement to populate a SAP database table say ZTABLE using XI. The Model is the table has to be populated through a file which will be processed by SAP XI. Basically this is a File to JDBC scenario. The database used is ORACLE. Kindly provide me some idea to go ahead.

    I tried to place the MS access table in the shared folder of the Application server system but still it seems the table is not being populated.
    did you check the log in your receiver channel? (/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn)
    The requirement is to update the tables directly as those are the custom tables.
    i would still say that do not update SAP tables directly from XI/ PI.....this is not a standard architecture/ solution....

  • Sales Document Classification in SAP

    Hi,
    I want to Classify Sales Documents in SAP. For example, the Inquiries will get classified into the following:
    · A_Type-Project: Business Unit/ Divisional level risk review required.
    · B-Type-Project: Large, medium project, product, service business.
    · C-Type-Project: Standard product business, Product oriented project business (clear scope, predefined process steps, no risk)
    The further processing of the Inquiry will depend upon where it falls in this classification. Can any one help me with how to achieve this in standard SAP?
    SAP Menu > Cross application components > Classification system gives the option to create classification type, characteristics etc. I am trying to explore further on this. How would you attach a classification to a business object, say a Sales Order or Quotation?
    Thanks in advance,
    Karthika.

    SPRO->SAP Web Application Server->Business Management->SAP Business Workflow->Basic Settings->Maintain task classes.
    After that create substitute profile and assign it to classification.
    Thanks
    Arghadip

Maybe you are looking for

  • Converting excel source into csv format

    Hi, I have to convert excle source into csv format. my excel source has around 40000 records. Please give me the suggestions how to do it. Thanks, Venkat

  • Error in displaying fonts when framemaker file is converted into PDF

    I have used HELVETICA NEAUE font in my FM files. When I save these files as PDF, the font displayed in PDF is ARIAL. Although I have HELVETICA NEAUE font in our OS (Control Panel>Fonts), why the wront font is displayed in PDF?

  • Keyboard keys not working on pavilion

    Hi, my qwerty and uiop keys repeated dont work sometimes and I have to use the online keyboard a lot.  Right now though they are working.  I have tried updating the bios, fn scroll lock, reinstalling the keyboard drivers, a hard reset by taking out t

  • Can't switch directly from 10.4.8 to 9.2.2

    I can't switch directly from 10.4.8 back to 9.2.2. I'm using the startup disk utility. While in 10.4.8, if I choose my 9.2.2 volume I get a crash when 9.2.2 tries to start up. The only workaround I have found is to switch to a 3rd disk (10.3.9) and t

  • Exception in extended class does not raise

    I have extended a seeded class and raised an exception in the extended class. Exception is raised if i modify seeded class. If i extend the class and then raise the exception it is not working. Any pointers.