How to do binding of rule with workflow

hi all
i have a problem regarding the binding of rule ,which i have maintained ,with the workflow on which i am working.
can any one please guide me how to do the binding of rule with workflow,the way am doing is like:
i have vreated a container element in workflow compatible with container element used in rule where agents are kept.
problem is arising when am trying to import that container in rule to my workflow ,at this step please suggest what should i bind in the binding of the workflow container.
the exact parameters detail will really appreciated.
am not new to the rule or workflow but somehow thing am doing is not working exactly the way i want it to be so.
full marks will be rewarded
best regards
ashish

Hi Ashish,
Please refer the following link. It may be helpful.
http://help.sap.com/saphelp_crm60/helpdata/en/c5/e4b0ae453d11d189430000e829fbbd/content.htm
Regards,
Johnny.

Similar Messages

Associate Business Rules with Workflow

Hi All,
We have a planning application, and forms are having some business rules.
Now our requirement is, when a user promote his cost center to another user, he should not have the access the Business Rules for that cost center.
so, is there any way that we can associate business rules with workflow?
Thanks in Advance,
Edited by: user12865804 on Oct 4, 2010 2:26 AM

Ya that will be a tricky one.
The only general comment is to build this into your process.
So you will give everyone a window to add To Be Hires during 1 or 2 week period. Then you block everyone and remove the ability to launch the script. Then managers review. So this becomes disconnected from "workflow" the tool inside of Planning.
You could build something but this would be way outside the out of the box process and I wouldn't want to go there personally. You would move the calc into a maxl script and build in code to validate against the workflow tables to see if the calc will work or not. This would require all sort of validate scripting and error handling and would require bring in some experts probably. The only other scenario is to troll the forums and maybe find someone how built something like this and get them to share their code.
In principal what you want sounds obvious and make sense to be in the tool.

Link rule with workflow

Hi everyone,
I'm new to workflows and I'm testing the creation of rules. I created the fm to determine the right agent, I created the rule, but I'm having some problems linking the rule with my workflow. Can someone point me in the right direction ?
thanks !!

Hi Bjorn
Open the step you want to assign the role to in the workflow builder (make sure it is a dialog or decision task). In the Agents section choose 'Role (or Rule dep on Release level)' and put the number of your rule in the next field to the right (do not enter the 'AC' identifier).
Hit enter and you will see the Binding button appear. Use this to assign elements from your workflow container to your rule parameters.
Regards
Gareth

How can I bind a operation with a table

Hi !
I'm trying to bind a operation with a table, so what type of operation return ? ViewObject or a Vector? And how can i set params to these operation if my operation has some param ( getSubscriber(int iSubId, int iSubType) )
Thank a lot for your help

Hi,
it depends on the release you are asking this question for. In JDeveloper 10.1.3 you can expose a method (e.g. on a session facade) that returns a Collection. The input parameters can be dragged and dropped as input fields to the page.
The same can be done in JDeveloper 10.1.2, but here you have to prgrammatically apply the input arguments.
Frank

How to create anti-spoof rules with exception

Hello all,
I'm a beginner with Ironport and I need to create rules for specific cases.
I manage many mail domains and I want to create an anti-spoof rule with message filter. Easy to do with a dictionnary containing all my mail domains.
But I have some mail addresses with external applications that need to be send with my mail domains.
For example, I receive acknowledge mails sent with [email protected] address and example.com is an domain accepted and managed by my enterprise. So if I activate my anti-spoof rule, all external [email protected] mail will be dropped.
For example I tried this rule with no success :
Filter_AntiSpoofing: if (recv-listener == "IncomingMail") AND (mail-from-dictionary-match("My_Domains", 1)) AND (mail-from-dictionary-match("Bypass_Sender", 0)){
drop();
I tried this rule too :
Filter_AntiSpoofing: if (recv-listener == "IncomingMail") AND (mail-from-dictionary-match("My_Domains", 1)) AND ((mail-from !="^[email protected]$") OR (mail-from !="^[email protected]$") OR (mail-from !="@ack.mydomain.com$")){
drop();
Have you got any tips or advice to answer my funny case ?

Hello,
We use the following message filter to ear-mark spoofed messages with an X-Header (which we later use for reporting since we told Ironport to log this specific header)
Spoofed_Email_Filter: if (recv-listener == "IncomingMail") AND (mail-from-dictionary-match("dict_internaldomains", 1)) {
insert-header("X-Spoofed", "from[$EnvelopeFrom]_To[$EnvelopeRecipients]_IP[$RemoteIP]_rep[$Reputation]");
The one drawback is that we need to maintain the Dictionary "dict_internaldomains". If we forget to add a new domain to this list it will never be detected as spam.
A good new message filter functionality would be to be able to do a "mail-from-rat-match" which would allow you to use the RAT tables(s) as dictionary.
We plan to solve this by moving the RAT to LDAP and query that same LDAP as dictionary. (If only I had time to test it) :D
Good luck,
Steven

How to find inflight instances associated with workflow

Hi All,
Is their any way that with the help of any sql query we could find out the number of inflight instances assoicated with workflows. I have 281 workflow in my case and i have to delete those which are of old version and have no inflight instances associated with it.
Iam very new to bpel so any help will be appreciated.
Thanks
Vikram

Hello Vikram,
What exactly do you mean with "workflow". Is this a composite? or a BPEL Process?
If you mean composites then the task you are describing can be achieved using the Oracle Fusion Middleware Infrastructure Management Java API. Look here for more info.
If you need some elaboration please let me know. I can post some example.
Regards,
Melvin

Release Strategy with Workflow for PR & PO

Hi Experts,
I have configured the PR & PO Release strategy and it is working fine. My client wants the Workflow concept in Releases.
So User should get the information about the releases for PR & PO.
But I don't have much idea on Workflow, how it works for Release strategy. Can anybody give information on how to configure the Release strategy with Workflow in PR & PO.
Points will be awarded .
thanks & rgds
Swamy

Hi Swamy,
The release workflow is configured by MM functional consultant. As for the workflow determination (i.e. which level should approve first and so forth) depends solely/mainly on the Finance of the company. It differs from one company to another. And the level of approval also differ from one company to another. Hence, like you mentioned, this would be provided by the user, so it is okay. I have replied to someone on another thread asking about workflow, and this is how it works.
How it works? For example, for a PR release strategy, once the PR is raised by a user for a certain value, the PR raised that matched the classification of the release strategy configured will be triggered. In this sense, once the release strategy is triggered, the releaser holding the release code to release this PR will receive a workflow in their SAP inbox (Not Outlook) for their execution, which is sent automatically by SAP system. These is accessible via the t-code SBWP. Each releaser have a unique login ID and password.
Assuming the release strategy required 3 levels of release, for example A3, A2 and finally A1 (final release), A3 will first receive this workflow in his/her inbox. After A3 has released, A2 will subsequently receive workflow in his/her inbox for this same PR. In the PR, you will be able to see that A2 release is now possible. This flow will continue until the final releaser, A1 and then, the status of the PR will be unblocked for issuance of PO.
How is it configured in SPRO? In the Workflow for PR release strategy, you are able to assign a unique ID (usually employee ID) to a particular release code, which these release codes are tied to one or more release strategies. The workflow determines who is to release for a release strategy with that particular release code via the assignment of the ID to that particular release code. Each assignment is only possible for one Plant, and you have to assign the same for many other Plants for the same ID in the workflow if you want him/her to have the authority to release purchasing docs in more than one Plant.
How to configure?
Before that, you need to obtain the following information - User ID of the releaser for the specified release code, Plant to be released by the user, and finally of course the Group and Release code (which you already have).
For PR: IMG>MM>Purchasing>Purchase Requisition>Release Procedure>Procedure with Classification>Set Up Procedure with Classification-->Workflow
For PO: IMG>MM>Purchasing>Purchase Order>Release Procedure for Purchase Orders>Define Release Procedure for Purchase Orders>Workflow.
Maintain the details u already have in hand:
For PR: Group (PR or PO), Code (release code), Plant (you have to maintain the same details for each of the Plant that the same release code releases) Object (US) and Agent ID (the user's ID used to login to SAP system and SBWP).
For PO: Group (PR or PO), Code (release code), Object (US) and Agent ID (the user's ID used to login to SAP system and SBWP).
Please note that PO is not Plant specific, and is usually one releaser to release the PO for GR. It is the PR that during the initial stage has the most level of release (up to max. 8 level) before a PR can be converted to PO. After the PO is converted, it is usually deemed accepted, hence only one release code is usually required to release the PO.
Hope this will give you an idea how the workflow works and how to configure it.
Rgds.

BOIS 4.2 - Disabling Rule Approval Workflow

Greetings,
How can we disable the rule approvals workflow in Information Steward ? from the application itself or from CMC ?
Regards,

Rule Approval is a part of rule management and governance process around validation rules. It's not possible to disable the rule approval.
Can you explain your scenario and need for disabling the rule approval?

How to setup PCG Flow Rule Process flow with Business Event subscription

Hi,
How to setup PCG Flow Rule Process flow with Business Event subscription type?
When should Business Events be used?
The latest user guide does not provide ay information on this functionality of Flow rules.
Thanks

You should find it's usage noted in the new PCG user guide on page 3-26 under the heading "Configuring Workflow/Event Rules". This way you can have a Flow Rule call a business event component or a workflow. This would be kicked off within a process flow as one of the steps.
I hope that helps.

How do I bind to directory server with SSL and authentication?

I'm running Lion Server 10.7.3, Open Directory master. In Open Directory/Settings/LDAP, I've checked the box to Enable SSL and selected a (self-signed) certificate. In Policies/Binding, I've checked the box to Enable Authenticated Directory Binding.
Testing with a client computer on which Snow Leopard has been freshly installed and fully updated, I went to System Prefs/Accounts to bind to the new directory server. The good news is, the binding was successful, and when the client initiates an AFP connection with the server, it uses Kerberos, creating a ticket as expected. (Which doesn't work with Lion clients, alas, but that's a seperate matter.)
Here are the problems:
1) It looks like the binding did not use SSL. By which I mean that when I opened Directory Utility and examined the LDAPv3 entry, the SSL checkbox was not checked. (If I then check the box, everything looks fine until I restart the client, after which I have a red dot. So I'm guessing that checking the box does nothing until after restart, and that it breaks the binding.)
2) I was never prompted to authenticate for the directory binding.
So I get that literally I'm *enabling* SSL and Authenticated Directory Binding, but it seems like the defaults are to bind without SSL or authentication, and there's no obvious-to-me way to force the binding to use those things. How do I do that?
What I'd really like to do is *require* SSL and Authenticated Directory Binding. I want this because my belief (correct me if I'm wrong) is that if authentication is required to bind to the server, no one will be able to bind to my server without my permission, and that SSL offers a more secure connection to my server than not-SSL. How do I require these things, or do I not really want to?
Thank you.

You cannot connect to databases via Muse at the moment. Please refer: http://forums.adobe.com/message/5090145#5090145
Cheers,
Vikas

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

How do I stop the ruler from moving along with my guide line as I move it?

Hello everyone,
I am new to muse and may well be missing the obvious here, but I have a little problem, which until it is solved is a big road block to me.
I am trying to move a guide lower on the page and can not do that because the left ruler is moving along with the guide!
How do I lock the ruler itself, so the guide can be moved to a different position on the ruler?
Totally weird. I have tried searching "locking rulers" both in this site and in google, but got no results at all. I don't think the rulers are supposed to move in the first place, so am worried that nobody out there may have an answer to this.
So I am stuck for now & I can't finish my project unless this is solved.
Thanks for reading,
Pat

I would need more details for this, as you have mentioned rulers move ? Are you referring to rulers on page in design ?
You can move a guide lower down the page , ruler marks will be displayed on ruler but that will not stop you moving the guides.
What happens if you uncheck rulers from top view options ?
Thanks,
Sanjit

How to create an rule with action to subtract from the event log of Ips manager express console?

how to create an rule with action to subtract from the event log of Ips manager express console?, some knows of has an guide?.
Thank you.
Sent from Cisco Technical Support iPad App

Hi,
http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_tech_note09186a0080bc7910.shtml
HTH
Luis Silva
"If you need PDI (Planning, Design, Implement) assistance feel free to reach us"
http://www.cisco.com/web/partners/tools/pdihd.html

How to bind ADF table with a collection of elements using backing bean.

Hi Experts,
My JDev version is 11.1.1.6.0.
I need to bind ADF table with a collection of elements using backing bean.
My backing bean consists of 6 lists of strings, where each list represents a column of table. How can I populate the entries of table with these lists.
Thanks
Gopi

Hi,
Create an object representing the row (setter/getter). Then have a list of these objects. Drag and drop the table and point its value to the list and the type to the row object
Frank

How to implement list of values with bind parameters

Hi All,
Please give me details about how to implement list of values with bind parameters.
I have implemented with below things.
1) created lov view object with query like select meaning, lookup_code from fnd_lookup_values where lookup_type=:1;
2) The above vo added to applicationa module.
3) created Controller class in the co class written code in processRequest();
String vLookupType=pageContext.getParameter("LookupType");
Serializable params={vLookupType};
am.invokemethod("Initialize",params);
4) In AM Impl Class invoke the VO
5) In VO Impl class executed the query..
But the above process working fine but when i give the value in lov text field like 'C' then press tab button the result will not showing instead of that i am getting error message, i want to implement standard lov functionality while implementing query with bind parameter.
any thing reqired to add the code to controller for search criteria..
Thanks
Mateti

Hi
i am getting error as
oracle.apps.fnd.framework.OAException: oracle.jbo.SQLStmtException: JBO-27122: SQL error during statement preparation. Statement: SELECT * FROM (SELECT meaning, lookup_code,lookup_type
FROM fnd_lookup_values
WHERE view_application_id = 200) QRSLT WHERE (lookup_type=:1 AND ( UPPER(MEANING) like :2 AND (MEANING like :3 OR MEANING like :4 OR MEANING like :5 OR MEANING like :6)))
Thanks
Mateti

How to do binding of rule with workflow

Similar Messages

Maybe you are looking for