How to do Default context value For DFF in OAF

Dear all,
I want to do Default context value For DFF in OAF for seeded page, pls let me know how to do.
Regards,
Hanimi

Hi Hanimi,
In controller use code
*dffBean.setFlexContext(pageContext,"+YOUR-LIST-VALUE+");*
*dffBean.setAttributeValue(OAWebBeanConstants.READ_ONLY_ATTR, new Boolean(false));*
Thanks
Jegan

Similar Messages

How to set the default context value for flexfield in OAFramework pages

Hi,
I have a page which contains a contexxt value field i.e Flexfields
To select the context value we have to select the value from drop down
So Here we want to display the context value immediately when the page is called
How to set the default valu in this case
Regards,
Krishna

You can set the Attribute category view attribute to the Flexfield context value and call prepareforRendering in the flex bean. Check the dev guide for details.
Regards
Sumit

How to use different default parameter value for different report subscriptions

In ssrs is it possible to define different default parameter values for different subscriptions? In the following example I have a report which has two subscriptions with different start date and end date values:
Report name – Testsubscription.rdl
Subscription-1
Input parameter (default values):
start_date = first day of current Month
end_date = till date
Subscription-2
Input parameter (default values):
start_date = first day of current Quarter
end_date = till date
I know an alternative way of doing this would be to copy the rdl file with a different name but I am curious whether this can be done within a single report definition file. I am using SQL Server 2008 R2 Standard Edition.
Thanks!
spp

Hi sppdba,
As per my understanding, there is a report with two parameter: start_date and end_date, you want to configure subscription for the report, and set different default values for start date and end date. And you want to know if it is possible to achieve you
goal by using a single report definition file.
Since you are using SQL Server 2008 R2 Standard Edition, we need to achieve your goal by configuring two subscriptions for the report. For detail information, please refer to the following steps:
1. In design surface, right click start_date and open Parameter Properties dialog box.
2. In General pane, type Name and Prompt, set Data Type to Date/Time.
3. Click Available Values in left pane, select Specify Values.
4. Click Add button, in Label text box, type “First day of Current Month”, click (fx) button in Value section, then type the expression like below:
=DateSerial(Year(Now()), Month(Now()), 1)
5. Click Add button, in Label text box, type “First day of Current Quarter”, click (fx) button in Value section, then type the expression like below, then click OK.
=DateSerial(Year(Now()), (3*DatePart("q",Now()))-2, 1)
6. Right click end_date and open Parameter Properties dialog box.
7. In Available Values pane, select Specify Values.
8. Click Add button, in Label text box, type “Today”, click (fx) button in Value section, then type the expression =Today(), then click OK.
Now that the parameters are created, we need to configure subscription for the report. For detail information, please follow these steps:
1. Open Report Manager, and locate the report for which you want to create a new subscription.
2. Hover over the report, and click the drop-down arrow.
3. In the drop-down menu, click Manage. This opens the General properties page for the report.
4. Select the Subscriptions tab, and then click New Subscription.
5. Select the delivery extension and data source for the subscription.
6. Select a method of delivery, then choose report delivery options.
7. Specify conditions that cause the subscription to process and delivery to occur.
8. Set start_date to First day of Current Month, end_date to Today, then click OK.
9. Create a new subscription as step4 to 7, set start_date to First day of Current Quarter, end_date to Today, then click OK.
The following screenshots are for your reference:
For detail information about Creating Standard Subscriptions, please refer to the following document:
http://msdn.microsoft.com/en-us/data/ms156307(v=sql.105)
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here.

What is the default timeout value for the SPQuery object?

What is the default timeout value for the SharePoint SPQuery object? I've tried searching online but can't find anything with the actual timeout value.
Someone suggested it might use the timeout property in the database? Anyone know if that's how it works?

Hi,
Do you want to avoid timeout when you query list items?
If so, we can use the following C# code to set timeout.
HttpContext.Current.Server.ScriptTimeout = 600; // 10 minutes
More information is here:
http://200oksolutions.blogspot.com/2013/03/sharepoint-2010-set-timeout-only-to.html
The SPQuery object doesn’t provide any property to set timeout. We can also set timeout in web.config, or SQL Connections or IIS.
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support

How to know the dynamic values for this :AND category_id_query IN (1, :3, )

Hi Team,
R12 Instance :
Oracle Installed Base Agent User Responsibility --> Item Instances -->
Item Instance: Item Instances > View : Item Instance : xxxxx> Contracts : Item Instance : xxxxx> Service Contract: xxxxx>
In the above page there are two table regions.
Notes.
-------------------------------------Table Region---------------------------
Attachments
-------------------------------------Table Region---------------------------
--the attachments are shown using the query from the fnd_lobs and fnd_docs etc...
I want to know what are the document types are displayed in this page ?
--We developed a custom program to attach the attachments to the services contracts and the above seeded OAF page displays those ..as needed.
But after recent changes..the Attachments--> table region is not showing the attachments.
I have verified the query..and could not find any clue in that..
but i need some help if you guys can provide..
SELECT *
FROM
*(SELECT d.DOCUMENT_ID,*
d.DATATYPE_ID,
d.DATATYPE_NAME,
d.DESCRIPTION,
DECODE(d.FILE_NAME, NULL,
*(SELECT message_text*
FROM fnd_new_messages
WHERE message_name = 'FND_UNDEFINED'
AND application_id = 0
AND language_code = userenv('LANG')
*), d.FILE_NAME)FileName,*
d.MEDIA_ID,
d.CATEGORY_ID,
d.DM_NODE,
d.DM_FOLDER_PATH,
d.DM_TYPE,
d.DM_DOCUMENT_ID,
d.DM_VERSION_NUMBER,
ad.ATTACHED_DOCUMENT_ID,
ad.ENTITY_NAME,
ad.PK1_VALUE,
ad.PK2_VALUE,
ad.PK3_VALUE,
ad.PK4_VALUE,
ad.PK5_VALUE,
d.usage_type,
d.security_type,
d.security_id,
ad.category_id attachment_catgeory_id,
ad.status,
d.storage_type,
d.image_type,
d.START_DATE_ACTIVE,
d.END_DATE_ACTIVE,
d.REQUEST_ID,
d.PROGRAM_APPLICATION_ID,
d.PROGRAM_ID,
d.category_description,
d.publish_flag,
DECODE(ad.category_id, NULL, d.category_id, ad.category_id) category_id_query,
d.URL,
d.TITLE
FROM FND_DOCUMENTS_VL d,
FND_ATTACHED_DOCUMENTS ad
WHERE d.DOCUMENT_ID = ad.DOCUMENT_ID
*) QRSLT*
WHERE ((entity_name    ='OKC_K_HEADERS_V'-- :1
AND pk1_value          IN ( 600144,599046) --:2
AND category_id_query IN (1, :3, :4, :5, :6, :7) )
AND datatype_id       IN (6,2,1,5)
AND (SECURITY_TYPE     =4
OR PUBLISH_FLAG        ='Y')))
--='000180931' -- 'ADP118'
The above seeded query is the one which is used for table region to retrieve the data..
how to know the dynamic values for this : AND category_id_query IN (1, :3, :4, :5, :6, :7) )
--Sridhar

Hi Patricia,
is it working for restricted key figure and calculated key figure ??
Note Number Fisc Period Opening Days
1 1 2
2 1 3
3 1 0
because I have other restriction, so I create two restricted key figure..
RK1 with restriction : Total Number of Note,
RK2 with restriction : Total Opening Days ,
then I Created a calculated key figure, average opening days in a period
CK1 = RK2 / RK1..
in this case, I am not sure if it will work or not..
for example, during RK2 calclation, it might be this   2+3 = 5, the line with 0 will be ignored..
during RK1 calcualtion, it might be 1 + 1 + 1 = 3. ---> Not sure in this case, the line with opening days 0 will be calculated or not..
could you please confirm..

Default search value for Query By Example Report

Is there any way I can add the wildcard % as a default search value for text fields in the customization screen for a QBE report? The aim is to relieve the user from knowing that you have to input the wildcard % in the search field.
Also, Is there a way to change the label of the standard 'Close' button, which is a bit misleading as it actually takes you back to the report customisation window?
Cheers,
Arnt

Hi,
You can give default values for bind variables in sql report and not for QBE reports. Also it is not possible to remove the close button.
Thanks,
Sharmila

Default cell values for column not properly saved in uir file in labwindows 2009 (9.1.0 427)?

I've run into a strange problem with the table control. Basically, even though I set default cell values for a particular column as numeric, when I try to add items to the list it tries to add them as strings, and returns an error message that it is expecting *char instead of int. Furthermore, when I open the uir file that contains the table in question in 2010, it appears as if the default cell values for that column are still set as strings, even though in 2009 when I open the uir file it shows as numbers. I tried converting the uir to C code, and sure enough the C code indicated that the column still is a string type.
I've gone ahead and made a small project to show the issue. If you open this project in labwindows 2009 and click on the table in the table_bug.uir, and edit default cell values for column 1, you will see that the cell settings have type as numeric and data type as int. When you run the project, however, it will fail with an error message saying that it is looking for a *char. When this same project is loaded into labwindows 2010, clicking on the table in table_bug.uir and edit default cell values (column 1) shows the type as string. When I change this to numeric (and change numeric attribute to int), this runs fine in 2010. I tried simply changing the uir in 2010, and then using it in 2009, but 2009 complains that the uir is from a newer version (understandable). If there is any workaround that would let me continue to use 2009 for the time that would be great.
Any help would be greatly appreciated.
thanks,
Alex Corwin
Solved!
Go to Solution.
Attachments:
table_bug.zip ‏324 KB

I opened the UIR in 2009 (but I have 2009 SP1) and it still showed that the default value for the first column was a string. I didn't have any problems changing it to a numeric int, and then building and running the project without error.
Here are a few things you can try:
1) Change the default value to a string. OK out of the dialog, re-enter the dialog, and change it back to Numeric int. Resave and see if the problem has gone away.
2) You said you get a ".UIR is from a newer version" error when opening the 2010 UIR in 2009. Does the UIR still open if you click okay? Often times this will work just fine. Assuming you don't have any problems with this, make a minor change to the UIR in 2009, such as moving the table to the left, and then back to the right and then re-save. See if your program works now.
Kevin B.
National Instruments

How to set a new value for formula field in crystal reports xi?

How to set a new value for formula field in crystal reports xi?//formula{@description} exemplo in VB6crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" orcrxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"How to in JRC? 

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

How to save a new value for Set command variable

I am using SET [variable = [String]] to update Set variable. It works fine. But when I restart MSDOS Prompt, I get old value for variable.
How to save a new value for SET command variable?
I am using Windows XP.

And this has to do with java how?

How to have a unique value for each record??

could any 1 help me out in this...
I want to have a column name 'Order No' which should be unique.
How to generate a unique value for each record.??

could any 1 help me out in this...
I want to have a column name 'Order No' which should be unique.
How to generate a unique value for each record.?? If you are using SQL PLUS to create the table try something like
this:
CREATE TABLE ORDER_TEST (
ORD_NO NUMBER (8) NOT NULL PRIMARY KEY,
ORDERDATE DATE,
CUSTID NUMBER (8) NOT NULL,
SHIPDATE DATE,
TOTAL NUMBER (8,2) CONSTRAINT TOTAL_ZERO CHECK
(TOTAL >= 0),
CONSTRAINT ORD_FOREIGN_KEY FOREIGN KEY (CUSTID) REFERENCES
CUSTOMER (CUSTID),
CONSTRAINT ORD_UNIQUE UNIQUE (ORD_NO)
-- or a simpler table example
DROP TABLE ORDER_TEST;
CREATE TABLE ORDER_TEST (
ORD_NO NUMBER (8),
ORDERDATE DATE,
CUSTID NUMBER (8) NOT NULL,
SHIPDATE DATE,
TOTAL NUMBER (8,2) CONSTRAINT TOTAL_ZERO CHECK
(TOTAL >= 0),
CONSTRAINT ORD_UNIQUE UNIQUE (ORD_NO)
note: ORD_NO can also be a primary key
If you are doing the INSERT during runtime from a form first
create a sequence in SQL PLUS to handle the ORD_NO value:
Create SEQUENCE ORDERNO_UNIQUEVAL_sqnc
START WITH 000001
NOMAXVALUE
NOCACHE;
and reference it as the ORD_NO parameter in your INSERT
statement:
ORDERNO_UNIQUEVAL_sqnc.NEXTVAL
note: to maintain data integrity you must use the sequence
everytime you insert a new order to table. To start a new
sequence drop the sequence and re-create it with whatever "START
WITH" value you want.
Hope this helps
Kevin

How to set default date value to a field on screen

How to set default date value to a field on screen and allow users to modify it ....

Hello,
In the PAI module, you need to save the changes to the database using the command MODIFY.
Follow an example:
Create or change a message in database table T100. If there is no message with the number 100 in the MYMSGCLASS message class in English, it will be created. Otherwise only the text is changed.
DATA message_wa TYPE t100.
message_wa-sprsl = 'EN'.
message_wa-arbgb = 'MYMSGCLASS'.
message_wa-msgnr = '100'.
message_wa-text = 'Some new message ...'.
MODIFY t100 FROM message_wa.
Regards.

How to defined data carrier valued for Linux?

Hi,
I am Defining Data Carrier. But I don't understand "Data carrier type" value. Is this PC value data carrier type for window? So If I want to define value data carrier for Linux. How to defined data carrier valued for Linux?
Please advise,
Duypm

Hi Nikita,
Refer the below mentioned links for your requirement.
http://forums.sdn.sap.com/thread.jspa?threadID=412923
http://forums.sdn.sap.com/thread.jspa?threadID=1639500
Both have good guidelines on coding as well as configuration part.
Regards,
Deepak Kori

How to get item field values for old versions?

I need to be able to query old field values from previous versions of items in a SharePoint list. I can't execute code on the server (it needs to work with SharePoint Online/O365 for a start).
So far the ONLY API I've that lets me do this is the lists.asmx GetVersionCollection SOAP call.
This lets me specify a single field name and returns an XML structure with the values for the various versions, along with the modification time and who made the change - but NO reliable way of actually identifying *which* version (i.e. an ID or label). That
is, if I know I need to fetch the Title value from version 512 ("1.0") of item 1 in list "Documents", I don't see how to reliably parse the results to determine which entry is version 512. While they may be returned in order, in many cases
the entries are actually missing when there was no field value present (or perhaps when the field hadn't been created yet). I've tried comparing the Modified date to the Created date of the corresponding FileVersion item (which I can get via CSOM or REST),
and while it works some of the time, it's not reliable. I've also looked at the output from the lists.asmx GetVersion API but I don't see how that's useful either, as the Created property for all versions always seems to be just the date the file was originally
created.
It does seem odd to me that there's not a neat way of doing this - if I need to return information for several fields but just for a single version, I have to make a whole lot of requests that return far more info than I need, and then I need to figure out
how to parse the returned text in the case of, say, multiple-value taxonomy fields etc.
Anyone tried doing anything similar here?
Thanks
Dylan

try these links:
https://support.office.microsoft.com/en-us/article/Track-and-view-version-information-for-SharePoint-list-items-2d69d936-fb0b-4c84-830e-11708e6ec317?CorrelationId=f87cf6ea-8cbf-446a-a4a0-e2c3a86b3425&ui=en-US&rs=en-US&ad=US
https://social.technet.microsoft.com/Forums/en-US/e48ff216-7ed1-4b20-9f21-d496b1583eea/how-to-get-item-field-values-for-old-versions?forum=sharepointdevelopment
http://sharepoint.stackexchange.com/questions/20019/get-meta-data-from-a-previous-version-of-a-document-through-webservice-in-moss-2
http://sharepoint.stackexchange.com/questions/121594/getting-information-from-previous-versions-of-a-sp-list-using-csom
Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing

How to find as ascii value for a string or char in unicode system?

Hello,
How to find an ascii value for a string or char in unicode system?
Thanks in Advance

hi ,
report demtest.
data : c.
field-symbols : <n> type x.
data : rn type i.
c = 'A'.
assign c to <n> casting.
move <n> to rn.
write rn.
This will convert 'A' to 65.
Tom Demuyt
How to convert ascii value to character.
If I give input as 65 (ascill value) I want display 'A'.
Below logic is for convert from character to ascii value , now I want to know how to convert ascii value to character.
Naveen
report demtest.
*going from A to 65
data : c value 'A'.
field-symbols : <n> type x.
data : rn type i.
assign c to <n> casting.
move <n> to rn.
write rn.
*going from 66 to B
data : i type i value 66.
data : x type x.
field-symbols : <fc> type c.
move i to x.
assign x to <fc> casting type c.
move <fc> to c.
write c.
regards,
venkat.

How to do Default context value For DFF in OAF

Similar Messages

Maybe you are looking for