How to do File Comparison in SAP PI

Hi All,
I have another requirement.
I have two text files, both containing a list of materials. I want to compare file A with file B and add the materials from file B that are not in file A.
For example
Input: File A
15-G
12-B
18-A
18-D
Input: File B
15-J
12-B
19-C
Output: Updated File A
15-G
12-B
18-A
18-D
15-J
19-C
As you can see the material 12-B already exists in file A so it isnu2019t copied across but 15-J and 19-C were copied across. Do you know how I could do this?
Any suggestion.
Thanks,

Hi,
The easiest approach is to do as I described above:
Read both files in sender file adapter, use ABAP mapping (should be much easier than graphical one, as some quite complicated logic is required to detect and delete duplicates) and write the results to target file with File Construction Mode = Create in receiver CC.
And use the Additional File(s) feature of the sender channel to get multiple files, as described here in Q4 and Q5:
http://wiki.sdn.sap.com/wiki/display/XI/SenderFileAdapterFrequentlyAsked+Questions
Hope this helps,
Greg

Similar Messages

How to open files from the SAP DMS (DOC Mgt. System) ?

Hello All,
 I making the Transaction CV04N in BSP.
When I execute this CV04N I should give a DOC Nr and the list is generated for this DOC.Now in the List if I select one Record and then Press Display Icon then the content of this list is opened in a new window in it's respective format (PDF,Word,GIF,Image file etc).These are stored in the SAP DMS.
 I want to open a file from this SAP DMS .
This can be done in ABAP using the standard FMs. But in BSP we can't use these FMs as it will call a screen.
The Fm which I'm using is " DOCUMENT_SHOW_DIRECT ".
In Report prog. To this FM I'll pass the
a, DOC Type
b, DOC Number
c, Document part and
d, Document version.
then It'll directly open a PDF file in a new window.
But in BSP how should I acheive this as the FM calls a screen internally.
The content of the documents are stored in the DMS. Is there any TCODE or Table to get the files from the DMS ?
How should I proceed ? can any one help me out.....
Regards,
Deepu.K

Hello All,
 I found the FM : CVAPI_DOC_OPEN_CAD which wil return the file path.
But when I execute this in my BSP since the FM internally calls a screen it fails.
But can anyone tell me the alternative for this.
Should I create a FM omitting the GUI code ?
I found one more thread which says that I can use classes starting with cl_gos*.
But all the classes use a gui.
Dowload a document from R/3 DMS to BSP page
Am I wrong in the interpretation of the logic from the above thread ?
Please suggest me .
I too went thru the BSP Applications CVAW_ENTIRE, CVAW_DOCUMENT_DISPLAY.
But these are used to display only the thumbnails.
There is no code for displaying other formats like PDF,XLS etc.
Please correct me if I'm wrong and let me know the correct path to solve my problem.
Regards,
Deepu.K

How to store a JSP file in the SAP Application server ?

Hello All,
My reqt. is as follows :
1. I need to store a JSP File on the SAP Application server .
How can I do this ?
2. I want to call the uploaded jsp file from the server and call this jsp from abap to view the result of it .
How can I achieve this ?
First of all is this possible ?
Regards,
Deepu.K

Hello Mike,
Thanks for ur reply.
I've imported the JSP as a mime object into the BSP.
Now I've created the page to show that Mime Object as an image.
But nothing is coming as an output.
But then,there is an option for that mime object. i.e when I right click on the mime object there is an option called " convert to BSP".
I selected that option and it created a view in my BSP .( My BSP is a page with flow logic application )
Now how should i make this view to be an output ?
I guess this shud be posted in the BSP Forum ...but still taking a chance here :)-
Regards,
Deepu.K

How to change file type associations in SAP ERP 6.0?

Hello,
I'd like to figure out how to change the application associated with a given file type in SAP. I want to open a .DOC file, but I am using OpenOffice instead of MS Word. I have .DOC file type already associated with OpenOffice in Windows XP, but SAP doesn't seem to recognize that association. I am using SAP ERP 6.0. Any ideas?
Mike

Hi,
MS Word is mandatory. You will not be able to work using Open Office in SAP.
Regards,
Rajesh Kumar

How to do the validation in sap xi (input file)

hi,
how to do the validation in sap xi (input file)?
regards
Ruban

Hi Ruban
There are no fixed set of validations.
It all depends on the exact functional requirements. Most of validations revolve in XI around,
1. Validation of madatory fields.
2. Cross Referncing of data.
3. Validation for data in some fields , etc
refr the below links for few details regarding validation
File Validations in SAP XI A Case Study
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/99593f86-0601-0010-059d-d2dd39dceaa0
refer this Blog
Validating messages in XI using XML Schema
/people/morten.wittrock/blog/2006/03/21/validating-messages-in-xi-using-xml-schema
 Where to create logical validations 
Where to create logical validations
 HTTP to File with source XML validation 
HTTP to File with source XML validation
Thanks!!
Regards
Abhishek Agrahari

How to transfer one file to multi sap with same IDOC Type?

Hi all!
I need your help..
My senario is tansfer one xml-file to multi-sap server
with same IDOC type.
IS it possible to transfer without BPM?
I think that the way not using bpm is impossble,
because the file is deleted by sender adapter.
If I'm using BPM, how to design?
I consider 'fork' or 'switch',
but, I guess,
Idoc is will be initialized by other branch at last step.
I hope good information.
Regards.

Hi,
you can create using BPM .
IR
you need to create source for one interface and trager for two differnent interfaces.
suppose if you are doing message mapping in message tab source is one interface targer is multiple interface..so that source can map multiple interfaces...
create the Interface mapping one source two are target interfaces.
Create the Integration proces...
First step is receive step next use the Transformation Step that means source message it will conver two targets...then use the Fork step Recever Determination step goes to the first Send step..
again drag the another receiver determination and use tge send step..close the FORK step.
regards,
venu.

How to view files from SAP DMS ?

Hello All,
I want to view the file from the SAP DMS .
I know the Storage category for original files .
The value of it is : DMS_C1_ST.
But how to gwt the file from this carrier ?
Can anyone help me out ?
Regards,
Deepu.K
Message was edited by:
deepu k

Hi deepu,
1. OAOR tcode.
regards,
amit m.

How to install transport request files into the SAP system

Hi Experts,
I want to install transport request files into my SAP source and target system . I am from BW/BI background so can anyone help me out with the step by step procedure for the above installation.
Thanks in advance
Regards
Shiva

Hi,
What I understand is, you want to transport request from one server to another.
for example, Development to Qualtiy or Quality to Production.
For this your transport system must be configured. Please search help.sap.com or google for "How to configure Transport System (STMS)".
If you want to copy transport request from one system to another system which is not in your landscape, you need to physically move/copy transport request (cofile and datafile) to the target system in /usr/sap/trans/cofiles and /usr/sap/trans/data
Then import that request using SCC1.
You can alos perform TEST import for result.
Regards.
Rajesh Narkhede

How can I install attachments for SAP notes with zip-files ???

How can I install attachments for SAP notes with zip-files ???

Can you elaborate on your question? How exactly is your question related to SAP NetWeaver Portal: Application Integration? If you are really asking how to install attachments contained in SAP notes, there is no automatic/general way and you should ask your question in the Software Support and Maintenance space to begin with. What SAP note(s) are you looking at installing?

How to convert the flat file data into sap tables . ?

how to upload flat file data into sap table . before upload mapping is also there in some filds . any one can give me some steps how to upload and mapping . ?

Hi
See the sample code
REPORT zmmupload.
Internal Table for Upload Data
DATA: i_mara like MARA occurs 0 with header line
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 program_name = syst-cprog
 dynpro_number = syst-dynnr
 IMPORTING
 file_name = p_file.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
 EXPORTING
 filename = p_file
 filetype = 'DAT'
 TABLES
 data_tab = i_mara
 EXCEPTIONS
 conversion_error = 1
 invalid_table_width = 2
 invalid_type = 3
 no_batch = 4
 unknown_error = 5
 gui_refuse_filetransfer = 6
 OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Upload the Data from Internal Table
MODIFY MARA from TABLE i_MARA.
Regards
Anji.

How to put file from a legacy system to SAP through FTP

Hi
I want to put one file which will be comming from legacy system to a folder of application server of the SAP system through xi.The protocol i want to use is FTP.
But im not sure about the configuration to be done for putting the file directly to SAP app server.
Anybody having idea what configuration i need to do in the SAP side to put the file into the app server directly through FTP.
Thanks
Debraj

Hi Debraj,
Try if these links help you solve your problem:
http://help.sap.com/saphelp_bw31/helpdata/en/4e/2ba038b81e897ce10000009b38f8cf/content.htm
http://www.sapfans.com/sapfans/saptips.htm#prog
http://help.sap.com/saphelp_nw04/helpdata/en/a4/db833d4c47ea4ea1a9b7af3c535ff2/content.htm
Cheers,
Chandra

How to download file from application server

Hi Experts,
 I developed report and execute in background mode. for this i used Open dataset transfer and close dataset . i got the requried output . But in this case user want downloaded file on presentation server so can anyone tell me How to download file from application server?
i know it is possible through Tcode CG3Y. but i want code in program.

This code will download a file to your Client package by package, so it will also work for huge files.
*& Report ZBI_DOWNLOAD_APPSERVER_FILE
REPORT zbi_download_appserver_file.
PARAMETERS: lv_as_fn TYPE sapb-sappfad
DEFAULT '/usr/sap/WBP/DVEBMGS00/work/ZBSPL_R01.CSV'.
PARAMETERS: lv_cl_fn TYPE string
DEFAULT 'C:\Users\atsvioli\Desktop\Budget Backups\ZBSPL_R01.CSV'.
START-OF-SELECTION.
CONSTANTS blocksize TYPE i VALUE 524287.
CONSTANTS packagesize TYPE i VALUE 8.
TYPES ty_datablock(blocksize) TYPE x.
DATA lv_fil TYPE epsf-epsfilnam.
DATA lv_dir TYPE epsf-epsdirnam.
DATA ls_data TYPE ty_datablock.
DATA lt_data TYPE STANDARD TABLE OF ty_datablock.
DATA lv_block_len TYPE i.
DATA lv_package_len TYPE i.
DATA lv_subrc TYPE sy-subrc.
DATA lv_msgv1 LIKE sy-msgv1.
DATA lv_processed_so_far TYPE p.
DATA lv_append TYPE c.
DATA lv_status TYPE string.
DATA lv_filesize TYPE p.
DATA lv_percent TYPE i.
"Determine size
SPLIT lv_as_fn AT '/' INTO lv_dir lv_fil.
CALL FUNCTION 'EPS_GET_FILE_ATTRIBUTES'
 EXPORTING
 file_name = lv_fil
 dir_name = lv_dir
 IMPORTING
 file_size_long = lv_filesize.
"Open the file on application server
OPEN DATASET lv_as_fn FOR INPUT IN BINARY MODE MESSAGE lv_msgv1.
IF sy-subrc <> 0.
 MESSAGE e048(cms) WITH lv_as_fn lv_msgv1 RAISING file_read_error.
 EXIT.
ENDIF.
lv_processed_so_far = 0.
DO.
 REFRESH lt_data.
 lv_package_len = 0.
 DO packagesize TIMES.
 CLEAR ls_data.
 CLEAR lv_block_len.
 READ DATASET lv_as_fn INTO ls_data MAXIMUM LENGTH blocksize LENGTH lv_block_len.
 lv_subrc = sy-subrc.
 IF lv_block_len > 0.
 lv_package_len = lv_package_len + lv_block_len.
 APPEND ls_data TO lt_data.
 ENDIF.
 "End of file
 IF lv_subrc <> 0.
 EXIT.
 ENDIF.
 ENDDO.
 IF lv_package_len > 0.
 "Put file to client
 IF lv_processed_so_far = 0.
 lv_append = ' '.
 ELSE.
 lv_append = 'X'.
 ENDIF.
 CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 bin_filesize = lv_package_len
 filename = lv_cl_fn
 filetype = 'BIN'
 append = lv_append
 show_transfer_status = abap_false
 TABLES
 data_tab = lt_data.
 lv_processed_so_far = lv_processed_so_far + lv_package_len.
 "Status display
 lv_percent = lv_processed_so_far * 100 / lv_filesize.
 lv_status = |{ lv_percent }% - { lv_processed_so_far } bytes downloaded of { lv_filesize }|.
 CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
 EXPORTING "percentage = lv_percent - will make it fash
 text = lv_status.
 ENDIF.
 "End of file
 IF lv_subrc <> 0.
 EXIT.
 ENDIF.
ENDDO.
"Close the file on application server
CLOSE DATASET lv_as_fn.

How to Send Internal table to SAP Spool using Function Modules or Methods?

Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
Kiran

This is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
 W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
 P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
 MY_MONTH type T549Q-PABRP,
 STR_MY_MONTH(2) type C,
 MY_YEAR type T549Q-PABRJ,
 STR_MY_YEAR(4) type C,
 CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
 ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
 INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
 CMD like PC408-LTYPE value '/:', "command
 TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
 DOCDATA like SODOCCHGI1,
 OBJTXT like SOLISTI1 occurs 10 with header line,
 OBJPACK like SOPCKLSTI1 occurs 1 with header line,
 RECLIST like SOMLRECI1 occurs 1 with header line,
 OBJHEAD like SOLISTI1 occurs 1 with header line,
 it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 gd_buffer type string,
 l_no_of_bytes TYPE i,
 l_pdf_spoolid LIKE tsp01-rqident,
 l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
 spool_id type rspoid,
 line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
 ITAB-PERNR = P0001-PERNR.
 ITAB-ABKRS = P0001-ABKRS.
 ITAB-ENAME = P0001-ENAME.
 ITAB-USRID_LONG = P0105-USRID_LONG.
 append itab.
 clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
 clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
 refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
 select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
 and FPBEG ge W_BEGDA
 and FPEND le W_ENDDA
 and SRTZA eq 'A'.
* Produce payslip for those payroll results
 if SY-SUBRC = 0.
 call function 'GET_PAYSLIP'
 EXPORTING
 EMPLOYEE_NUMBER = ITAB-PERNR
 SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
 PAYSLIP_VARIANT = PAY_VAR
 IMPORTING
 RETURN = RETURN
 P_INFO = P_INFO
 TABLES
 P_FORM = P_FORM.
 check RETURN is initial.
* remove linetype from generated payslip
 loop at p_form.
 objbin = p_form-linda.
 append objbin.
 line_cnt = line_cnt + 1.
 endloop.
 file_length = line_cnt * 1022.
* create spool file of paylsip
 CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
 EXPORTING
 i_file_length = file_length
 IMPORTING
 e_spoolid = spool_id
 TABLES
 it_textdata = objbin.
 IF sy-subrc EQ 0.
 WRITE spool_id.
 ENDIF.
 DESCRIBE table objbin.
 DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
 CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 SRC_SPOOLID = spool_id
 NO_DIALOG = ' '
 DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
 TABLES
 PDF = pdf
 EXCEPTIONS
 ERR_NO_ABAP_SPOOLJOB = 1
 ERR_NO_SPOOLJOB = 2
 ERR_NO_PERMISSION = 3
 ERR_CONV_NOT_POSSIBLE = 4
 ERR_BAD_DESTDEVICE = 5
 USER_CANCELLED = 6
 ERR_SPOOLERROR = 7
 ERR_TEMSEERROR = 8
 ERR_BTCJOB_OPEN_FAILED = 9
 ERR_BTCJOB_SUBMIT_FAILED = 10
 ERR_BTCJOB_CLOSE_FAILED = 11
 OTHERS = 12
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = 'C:\itab_to_pdf.pdf'
 filetype = 'BIN'
 TABLES
 data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
 OBJHEAD = 'Objhead'.
 append OBJHEAD.
* preparing email subject
 concatenate W_ENDDA(6)
 ' Payslip-'
 ITAB-ENAME+0(28)
 ITAB-PERNR+4(4) ')'
 into DOCDATA-OBJ_DESCR.
 DOCDATA-OBJ_NAME = 'Pay Slip'.
 DOCDATA-OBJ_LANGU = SY-LANGU.
 OBJTXT = 'Pay Slip.'.
 append OBJTXT.
*prepare email lines
 OBJTXT = DOCDATA-OBJ_DESCR.
 append OBJTXT.
 OBJTXT = 'Please find enclosed your current payslip.'.
 append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
 read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
 clear OBJPACK-TRANSF_BIN.
 OBJPACK-HEAD_START = 1.
 OBJPACK-HEAD_NUM = 0.
 OBJPACK-BODY_START = 1.
 OBJPACK-BODY_NUM = 3.
 OBJPACK-DOC_TYPE = 'RAW'.
 append OBJPACK.
* Create Message Attachment
 ATT_TYPE = 'PDF'.
 describe table OBJBIN lines TAB_LINES.
 read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
 OBJPACK-TRANSF_BIN = 'X'.
 OBJPACK-HEAD_START = 1.
 OBJPACK-HEAD_NUM = 0.
 OBJPACK-BODY_START = 1.
 OBJPACK-BODY_NUM = TAB_LINES.
 OBJPACK-DOC_TYPE = ATT_TYPE.
 OBJPACK-OBJ_NAME = 'ATTACHMENT'.
 OBJPACK-OBJ_DESCR = 'Payslip'.
 append OBJPACK.
* Create receiver list refresh RECLIST.
 clear RECLIST.
 RECLIST-RECEIVER = itab-USRID_long.
 translate RECLIST-RECEIVER to lower case.
 RECLIST-REC_TYPE = 'U'.
 append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
 call function 'SO_DOCUMENT_SEND_API1'
 exporting
 DOCUMENT_DATA = DOCDATA
 PUT_IN_OUTBOX = 'X'
 COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
 tables
 PACKING_LIST = OBJPACK
 OBJECT_HEADER = OBJHEAD
 CONTENTS_BIN = pdf
 CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
 RECEIVERS = RECLIST
 exceptions
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 DOCUMENT_TYPE_NOT_EXIST = 3
 OPERATION_NO_AUTHORIZATION = 4
 PARAMETER_ERROR = 5
 X_ERROR = 6
 ENQUEUE_ERROR = 7
 others = 8.
 if SY-SUBRC NE 0.
 ITAB-MTEXT = 'Message Not Sent to : '.
 else.
 ITAB-MTEXT = 'Message Sent to : '.
 endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
 else.
 "SY-SUBRC Not = 0
 ITAB-MTEXT = 'Payroll data not found : '.
 endif.
 "end of SY-SUBRC = 0.
 modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
 at new MTEXT.
 uline.
 write : / ITAB-MTEXT color 4 intensified on.
 write : / 'Emp. Code' color 2 intensified on,
 12 'Emp. Name' color 2 intensified on,
 54 'Email ID' color 2 intensified on.
 endat.
 write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop.

How to insert a logo in sap script?

How to insert a logo in sap script?

Steps to insert a logo,
I
1. First save the file as BMP
2. Open the BMP file in IMaging (Goto -> Programs -> Accessories -> Imaging) and
make it Zoom as 100% and save as *.TIFF
3. Open SE38 and execute program RSTXLDMC
4. Give your TIFF file path name
5. Select Bcol (for Color)
6. TEXT ID will be ZHEX-MACRO-*.
7. Inplace of * write your own logo name (ZCOMPANYLOGO)
8. Execute the program
9. Now Goto SE71 create your ZFORM
10. Create logo window
11. Goto text element of logo window
II
1. Goto SE71 Change the mode to GRAPHICAL
2. Choose the Graph Tabstrips
3. Now type in some name for the LOGO WINDOW
4. Press the IMPORT BUTTON and then IMPORT the BMP file from your DESKTOP
5. The code will be written automatically. You just need to drag and drop wherever you want
the graphics to be.
III
1 ) create a bmp file in local system
2 )RSTXLDMC FM to upload image in tiff format.
Also check these links...
Logo in SAP SCRIPT
Re: Uploading a (Image) Logo in your Sap Script
Need Urgent Help for Logo Uploading the Sap Script
sap script logo
http://www.sap-img.com/ts001.htm
Regards,
Sakthi Sri.

Query on integrating windows file server into SAP KM using WEBDAV

hi
I have sucessfully integrated windows file server into SAP KM using WEBDAV. I have query in it regarding the possible validation against the portal Database user. Can we configure such that the user comparison happens for LDAP as well as database user. Have anyone configured such a scenario?
Regards,
Ganesh N

Hi Ganesh,
this should work in principle.
However you would need a user in Active Directory for each user in the portal database that should connect to the file server if you are using the SSO22KerbMap Module as I assume.
In my whitepaper I have mentioned this for the internal user index_service that does only exist in the portal database.
Best regards,
André

How to do File Comparison in SAP PI

Similar Messages

Maybe you are looking for