How to do INIT for Sales order Itema Data (DS 2LIS_11_VAITM)

Hi all
I have a report on sales order item data, I have to reload it. DS 2LIS_11_VAITM
Can any of you pls explain me the steps to do the INIT? Refill set up tables etc
Many Thanks in advance
Ishi

Hi Hari
Many Thanks for the explanation and steps. I deleted set up tables and executed to fill it.
It says in R/3 Start of Processing, I ticked to continue and its still running.
In the mean time I checked RSA3 and it says 1007 records selected. I am refreshing it and the no. of records are still the same.
Can you tell me how long it takes to fill the table?
And the R/3 system is still running (Start of Processing)
Thanks again
Ishi

Similar Messages

How to supress tab for Sales Order item (VA01)

Hi,
Please suggest the ways to suppress tab (example "Country") which appears at Sales Order item for some countries.
Thanks,
Edited by: Dipesh Kothari on Oct 6, 2009 8:34 PM

Hi
If you want to suppress the tab which is appearing at sales order line item then using t.code SHD0 and give the t.code VA01 and business object as BUS2032 and then select the line item data and then you can suppress the fields as per your requirement
Kindly let us know why you want to suppress the fields ?
Regards
Srinath

Sales order item data & sales order schedule data

Hello,
I have a Sales Orders cube which is pulling data from two DSOs (one for sales order item data and the other for sales order schedule data). The common fields between these two DSOs is the Sales Order number but in my cube I have dual entries for each Sales Order document (item and schedule info).
Example of how the data looks now:
Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . . Act GI Date
1. . . . . . . . . ...TAN. . . . . ABC123. . . .10
1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 . . . . . . . . 01/01/2000
2. . . . . . . . . ...TAN. . . . . CBA321. . . .15
2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 . . . . . . . . 01/02/2000
How do I merge the data on the Sales Order number in the cube so it looks like below?
Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . . Act GI Date
1. . . . . . . . . ...TAN. . . . . ABC123. . . .10 . . . . . . . . . .1 . . . . . . . . 01/01/2000
2. . . . . . . . . ...TAN. . . . . CBA321. . . .15 . . . . . . . . . .2 . . . . . . . . 01/02/2000
Many thanks,
Matt

> Hello,
>
> I have a Sales Orders cube which is pulling data from
> two DSOs (one for sales order item data and the other
> for sales order schedule data). The common fields
> between these two DSOs is the Sales Order number but
> in my cube I have dual entries for each Sales Order
> document (item and schedule info).
>
Two previous remarks:
1) If you need to report on very detailed data consider doing an info-set joining both datastores. 2 reasons why:
- not a good idea to report on very detailed information (sales order, GI dates) on cube level, if you have a scenario with lots of data. You end up with big dimension tables a poor report times;
- there are better alternatives, like drill-through from cube query to DS query with report to report interface or Datastore-based reporting...so...
With this solution you do not need to change the data model, I think, but test to be sure. See if the reporting times are acceptable. If not...
2) First confirm your requirements, because what you show in your example as "to-be" have details that do not make sense, probably..
- if you have more that one schedule line for each item then you would have many times the item information like material/price;
- if not or if you could cope with that, then you can consider:
2.1) create a new DS that agregattes from the previous on, with the same key of sales order item; do you have schedule line kf's? if so you these KF's should be additive in DS update; But if you may have more one scheduled line for 1 item then you have to decide what to do with the GI data (keep the last one posted, use code..) and other characteristics.
2.2) update the shedule line datasource to the sales order item DS; same comments apply.
2.3) maintain the missing data in the cube update rules from sheduled lines DS. Using code, refer to the respective item in the order item ODS. You would have to make sure that DS's data are correctly activated before updating the infocube.
What solutions to choose?
2.1 is better in terms of flexibility and architecture...because you could re-arrange the new DS to answer future needs, without loosing the 1st line DS's data;
2.2 choose if data volumes and disk space are a concern...
or
2.3 it's OK, but i do not like it because of what explained in point 1...
Message was edited by:
Miguel Costa

Sales Order Item Data & Sales Order Schedule Lines

Hello,
I have a Sales Orders cube which is pulling data from two DSOs (one for sales order item data and the other for sales order schedule data). The common fields between these two DSOs is the Sales Order number but in my cube I have dual entries for each Sales Order document (item and schedule info).
Example of how the data looks now:
<b>Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . . Act GI Date</b>
1. . . . . . . . . ...TAN. . . . . ABC123. . . .10
1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 . . . . . . . . 01/01/2000
2. . . . . . . . . ...TAN. . . . . CBA321. . . .15
2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 . . . . . . . . 01/02/2000
How do I merge the data on the Sales Order number in the cube so it looks like below?
<b>Sales Order . . Item Cat. . . Article . . . Net Price . . . Delivery . . . Act GI Date</b>
1. . . . . . . . . ...TAN. . . . . ABC123. . . .10 . . . . . . . . . .1 . . . . . . . . 01/01/2000
2. . . . . . . . . ...TAN. . . . . CBA321. . . .15 . . . . . . . . . .2 . . . . . . . . 01/02/2000
Many thanks,
Matt

Hi Matt,
    Its no possible If you are maintaining data at Order Level.
Try to introduce one more ODS/DSO in between ODS's and CUBE by keeping Sales Order only key field. Load data from both DSO's in required fields only. Then PUSH delta to CUBE. In this why you can maintain 1 record. Try to compress cube(with delete Zero Record Rows) to delete unnessasary records.
Hope it Helps
Srini

How to configure rescheduling for sale order quantities

kindly explain how to configure rescheduling for sale order quantities that are created last month. kindly explain. i am in urgent.
regards,
g.v.shivakkumar

Hi,
Short text
Rescheduling sales and stock transfer documents: by material
Description
The 'Rescheduling' program (SDV03V02) processes sales document items that are contained in the item directory for the material. It takes into consideration open items and schedule lines from stock transfer items, stock transfer scheduling agreements and purchase order requests (items only), referred to hereafter as stock transfer documents, for the materials.
All sales documents for the material that are still open are selected. This means that the material index must be activated for at least all sales document types, whose items may have requirements. All stock transfer documents or items for the material that are still open are also selected. Open in this case means for example, that there is no deletion indicator, that the item from a stock transfer purchase order request cannot be labeled as completed or that the quantity delivered and posted to goods issue for the item in a stock transfer purchase order is the same as the amount ordered. An availability check can only be carried out if a checking rule is assigned to the document type - if this is not the case, the document or document item is not checked.
Checking rule 'A' is used as a basis for rescheduling sales orders (exceptions to this are rush orders they use checking rule B, and orders with individual customer stock; they use checking rule AE). Stock transfer documents use the checking rule that is assigned in Customizing for Purchasing. It is important that the scope of checks is consistent for both the stock transfer documents and the sales documents and that they do not exclude each other, as this can lead to incorrect test results. An example of an incorrect setting would be: The scope of check for checking rule 'A' checks delivery schedules for stock transfer purchase orders and stock transfer purchase requests, however the scope of check for the checking rule for the stock transport scheduling agreement does not.
The items and schedule lines found in the selection are sorted according to 'Priorities' - document category, delivery priority, creation date of the item or schedule line (for stock transfer purchase orders and delivery plans) entered on the selection screen or according to the schedule line date of the earliest schedule line with order quantity, document number and item number and then transferred to the availability check. Priority 1 is highest priority and priority 5 the lowest. Stock transfer purchase order requests are sorted after stock transfer purchase orders and scheduling agreements, as they are less binding. This means that when you have identical sort criteria such as delivery dates, the stock transfer purchase order item is checked first and then the item from the stock transfer purchase order request.
The preset option 'Unconfirmed documents required' only carries out rescheduling for materials for which there is at least one unconfirmed transaction.
You can use the parameters 'Sorting criteria delivery date' to define whether sorting is carried out with the order quantity after the creation date of the item or the delivery date of the earliest schedule line.
If you mark the 'Simulation' field, the checked documents are not saved. Instead a results list is generated and saved. However, the availability check for the corresponding documents continues as if saving has taken place already, that is, that the simulated list corresponds to the actual one.
Under 'Options' on the selection screen, specify whether sales documents and/or stock transfer documents should be processed. For stock transfer documents you can enter whether stock transfer purchase orders and scheduling agreements should be processed at item or schedule line level:
Processing at item level:
All open schedule lines for the item are read and collected, then transferred to the availability check. To sort and prioritize documents, you do not need each individual schedule line. It is sufficient to have the item or data from the first schedule line. All open schedule lines for the item are processed and checked.
Example of processing at item level:
Sorting: Date (Delivery date first schedule line) - Document number - Document item
Doc. cat. Doc. number Doc. item Doc. schedule line Delivery date PO        4500000012      10               0001              26.01. PO        4500000012      10               0002              26.02. PO        4500000025      20               0001              28.01. PO        4500000025      20               0002              02.02.
You can see that the second schedule line for document 4500000025/20 from 02.02 was processed after the second schedule line for document 4500000012/10 from 26.02. This is because all open schedule lines for an item are read and processed. The first schedule line from 4500000012/10 has the earliest delivery date, therefore it has priority.
Processing at schedule line level:
Each open schedule line for an item is entered in document sorting in accordance with the values entered under 'Priorities'. The availability check is carried out for each individual schedule line.
Example for processing at schedule line level:
Sorting: Date (delivery date first schedule line) - document number -document item
Doc. cat.    Doc. number Doc. item Doc. sched. line Del. date PO           4500000012    10             0001           26.01. PO           4500000025    20             0001           28.01. PO           4500000025    20             0002           02.02. PO           4500000012    10             0002           26.02.
Here you can see that each schedule line was sorted according to its delivery date. Note that this type of processing requires more runtime due to the individual checks and more frequent saving.
The results of rescheduling are saved, as long as the program was not started in simulation mode. When calling up from the 'Sales' area menu or when directly starting via the development environment, the iniator is informed via a dialog box that he has just started a process that changes data. He can then decide whether or not he wants to continue.
Checking procedure for stock transfer documents:
An availability check of stock transfer documents in rescheduling is carried out in accordance with the check carried out when manually creating a document. If, however, the required quantity for a schedule line is not available on a particular date and will not be ready until later, new schedule lines are created for the stock transfer purchase orders and scheduling agreements, containing the relevant data. New items are created in this case for stock transfer purchase order requirements. The total sum of schedule line quantities for a processed schedule line corresponds to the schedule line quantity of the original schedule line.
First example: Using a stock transfer purchase order item with a schedule line:
a) Status of item before rescheduling run:
Del. date PO quantity   Confirmed quant Confirmed del. date 23.07.      50 items       0 items              -
==> This now affects the stock/requirement situation:
    - Goods issue is posted for the material in the delivering plant on the 23.07.
    - A purchase order of 10 items was created for the material in the delivering plant. Delivery is expected on the 29.07.
b) Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity   Confirmed quant   Confirmed del. date 23.07.     40 items      40 items            23.07. 29.07.     10 items      10 items            29.07.
==> The first schedule line was changed in accordance with the results of the rescheduling availability check. Only 40 of the 50 original items could be delivered on the 23.07. Therefore, a new schedule line is created for the rest on the 29.07. for 10 confirmed items.
Second example: Same output situation as the above example.
==> There is now a change in the requirement/stock situation:
A purchase order for 10 items is created for the material in the delivering plant. Delivery is expected on the 29.07. A further purchase shows another 40 planned items on the 30.07.
   Status of stock transfer purchase order item after rescheduling run:
Del. date PO quantity Confirmed quant Confirmed del. date 29.07.     10 items       10 items          29.07. 30.07.     40 items       40 items          30.07.
==> The first schedule line was changed in accordance with the result of the availability check for rescheduling. The original delivery date is set to the date confirmed in the ATP check. A new schedule line is created for the remaining 40 items, that are available on the 30.07.
Note:
Any set fixed delivery date and quantity indicators and creation indicators for schedule lines or items are 'inherited' by newly created schedule lines. Assuming that the original schedule line was fixed in the above example (since it is created manually), this indicator is also set for the newly created schedule line.
If shipping scheduling is activated for a stock transfer document type, this is also implemented for newly created schedule lines, with the exception of route schedule determination. This means that in the current version of the program no route schedule has been determined for a schedule line containing a route schedule for which new schedule lines may need to be created.
The results of the run are issued in the form of a list, which is also saved, so that the results can be controlled at a later date. This is done using the function 'Evaluate rescheduling', but it is only a good idea to do this after the first rescheduling has taken place. You can restrict selection requirements but these can however affect the runtime. You can use this function to analyze the saved list until the next rescheduling run, which writes over the result. If you start rescheduling in the background, a spool file with the result list referred to will be created in the corresponding setting. You can see this in spool management.
Output
A list of changed documents, a list of documents in which an error occurred during processing and as a result were not changed, can be called up via the menu 'Edit - Error log'. If in a subsequent evaluation a restricted selection is carried out, a note appears at the end of the list to say that not all document items are displayed.
You can set the scope of the list under the menu option 'List' in the list display. You can view improvements, deteriorations and the whole list. Before the documents can be included in one or either of the restricted lists, the date or quantity has to have changed so that the item can be contained in both the list of improved or deteriorated documents.
You can use the interface for changing transactions and the order list to navigate. Use 'Back' to exit the list and 'New selection' to return to the selection screen.
Recommendation
You should only start this program occasionally and use very restricted selectin criteria during working hours as it requires enormous system resources.
Note
The columns for 'New date' and 'New confirmed qty' only contain entries if the dates or quantities have changed.
As the system only runs the change check (dates/quantities) per line in the original list, an item whose backlog has increased in the list of improvements. This occurs, for example, if the whole quantity can be delivered at once but at a later date. In this situation, the system determines an increase for the line when it compares quantities.
Regards,
Amrish Purohit

BOM Cost Estimate for sales order items

Hi experts,
    Which data source could extract data created by CK51N (Order BOM Cost Estimate )? We need to get BOM Cost estimate (including input material and activity) for sales order items.
    The closest one is 0CO_PC_01, but it extracts itemizations for production order.
    It's urgent.Helpful answers would be awarded.Thanks.
Regards,
Aaron

Hi Henry,
   They even do not have Sales Order segment. How could I get cost estimate data based on sales order?
Regards,
Aaron

Wrong short text for sales order item

Hi guys,
I have an issue for the short text for sales order item. It is werid that I get the different short text depends on how we enter the material. If we only enter the material #, we get the short text for sales order item from material master data. If we enter the material #, plant and storage location, we get the short text for sales order item from customer material infor record. However, the customer material infor record is only maintained for inter-compnay transaction. System should not pick it for third-party transaction.
I found a code in FV45PFAP_VBAP_FUELLEN:
Bei Primärbedarfen ist MAAPV-ARKTX nicht relevant
    if vbak-vbtyp ne vbtyp_pbed.
      vbap-arktx = maapv-arktx.
    endif.
Kundenmatinfo hat höhere Priorität
    if knmt-postx ne space.
      vbap-arktx = knmt-postx.
    endif.
    if da_arktx ne space and
       svbap-tabix = 0 and
       vbapin-matnr = vbap-matnr.
      vbap-arktx = da_arktx.
    endif.
But it is nothing customized. Who can tell me what is wrong here?
Thanks,
DL

Hi,
Text coming from source (MMR, CMIR etc.) is being "pulled" via the access sequence. Check the Text analysis in your sales order in Tab Texts, at item category level.

Function Module or BAPI to update Short text for sales order item(vl02n)

Hi All,
I need to update the Short text for sales order item in vl02n transaction from an internal table with Delivery number and other relevant details .
Does any body know any Function Module or BAPI which can accomplish this purpose .
Or else writing BDC is the only option I have got ? .
Please clarify .
Thanking you in advance .
With Regards,
Suriya .

Hi
You can try using BAPI_SALESORDER_CHANGE if you want to change sales order
Regards
MD

Transaction to maintina Billing Plan for Sales order item

Hi All,
Is there any transaction other than VA01/VA02 to maintian Billing plan for Sales order item.
Thanks & Regards,
Rajanidhi Rajasekeran.

It is possible to maintain Billing Plan in Sales Document Type (VOV8), as well as Item Category level (VOV7). As you want it at Item level, maintain the same in Item Category Configuration at Item level & it will by default be captured in Sales Order at Item level.
Step 1: Sales Document Type
IMG > Sales and Distribution > Sales > Sales Documents >
Sales Document Header:
1. Sales Document Type:The sales document types represent the different business transactions, such as Inquiry, Quotation, Sales Order, etc. To create new sales order type, always copy as with reference to similar sales order. If possible use standard sales order.
2. Define Number Ranges For Sales Documents: Maintain number range with discussion with core team.
3. Assign Sales Area To Sales Document Types:
A. Combine sales organizations / Combine distribution channels / Combine divisions: Ensure to maintain these, else Sales Order creation will give error.
B. Assign sales order types permitted for sales areas: Assign only required Sales Order Types to required Sales Area. This will minimize selection of Sales Order Type as per sales area.
Sales Document Item:
1. Define Item Categories: If possible use Standard Item Category. Incase if required to create new, copy as from standard & maintain New.
2. Assign Item Categories: If possible, use standard. Formula for deriving item category: Sales Document Type + Item Category Group + Usage + Higher Level Item Category = Item Category
Regards,
Rajesh Banka

Surcharge rate for sales order item condition

Hi,
I have a two condition for sales order item.
First condition is ZP00-Price. It is using for automatically price with customer and material. It linked with account key in pricing procedure.
Second condition is ZI00-Index rate. Calculation type is A-Percentage. This condition value is monthly. It will be used for surcharge with percantage . I have a formule this condition.
It is not linked with account key in pricing procedure.
Formula for ZI00 - Index rate:
(Index Rate to delivery date - 1 / Index Rate to contract start date) x 100
For example;
Index rate conditions is entrying monthly;
Index date          Index%
01.08.2008         1,05
01.09.2008         1,15
01.10.2008         1,17
Contract start date = 03.08.2008
Delivery date = 02.10.2008
ZP00 = 500
ZI00 = Index rate for sales order item = ((1,17-1)/1,05 ) * 100 = 16,19
Last condition value = 500 + (500 * 16,19)/100 = 500 + 80,95 = 580,95
What can I do for this pricing?
Best Regards
Gulay Celik

Hi
I think that perhaps it is too late. The application supports cancellation and re-billing as separate transactions. Maybe this is not a 'development' problem.
Cheers
Dom

Idoc segment for updating Sales order item dates

Hi All,
I would ike to update the sales order item dates (loading date, Goods Issuance date etc) from an IDOC.
please let me know the Idoc segment and fields that need to be filled in?
Thanks in advance.
Regards,
Zeeshan.

Hi,
Here are some details of the segments in the idocs -
SEGNAM Segment Name E1EDL20
VBELN Sales and Distribution Documen 180001539
SEGNAM Segment Name E1EDL18
QUALF IDOC Qualifier: Control (Deliv PIC : Picking with flow records (inbound)
SEGNAM Segment Name E1EDL18
QUALF IDOC Qualifier: Control (Deliv PGI : Post delivery goods issue (inbound)
SEGNAM Segment Name E1EDT13
QUALF IDOC Qualifier: Date (Delivery 010 : Picking
NTANF Constraint for activity start 20090808
ISDD Actual start: Execution (date) 20090808
SEGNAM Segment Name E1EDL24
POSNR Item number of the SD document 10
MATNR Material Number 1112
WERKS Plant SG01
KDMAT Material belonging to the cust 1112
LFIMG Actual quantity delivered (in 55
VRKME Sales unit EA
POSEX External item number 10
ORMNG Original Quantity of Delivery 55
SEGNAM Segment Name E1EDL41
QUALI Qualifier for Reference Data o 001 : Purchase order data of customer
BSTNR Customer purchase order number 4500004668
BSTDT Customer purchase order date 10
POSEX Item Number of the Underlying 10
SEGNAM Segment Name E1EDL37
Regards,
Shamma

Upload sales order item data

Hi All,
I need to upload sales order item data.Could you please tell me the steps in R/3 to replicate data BW.
Thanks
Raj

Hi,
Steps to upload sales order item:
1) Maintain extract structure (LBWE)
2) Maintain Datasource. (LBWE)
3) Replicate datasource in BW
4) Assign Infosources (RSA1 - BW)
5) Maintain comm struc/transfer rules (RSA1 - BW)
6) Maintain infocubes and update rules (RSA1 - BW)
7) Activate extract structures (LBWE)
8) Delete setup tables / setup extraction (For deleting LBWG and for setup use OLI7BW).
9) Infopackage for delta init
10) Set up periodic V3 update (LBWE)
11) InfoPackage for delta load.
Hope this helps.
PB

WBS element for Sales Order Item level

Hi gurus,
I am trying to create an inbound idoc for sales order ' VA01'. I need to populate WBS element in the item level under Account Assignment Tab. I am using ORDERS05 basic type. Please help to find which segment to use for WBS element. Waiting for your reply. Please help.
Regards,
Satyajit
Edited by: Satyajit Saha on Feb 22, 2008 1:24 AM

Hi gurus,
I am trying to create an inbound idoc for sales order ' VA01'. I need to populate WBS element in the item level under Account Assignment Tab. I am using ORDERS05 basic type. Please help to find which segment to use for WBS element. Waiting for your reply. Please help.
Regards,
Satyajit
Edited by: Satyajit Saha on Feb 22, 2008 1:24 AM

How to get PO from sales order item in CRM

Hi,
I am building a BI extractor which needs PO for a given complaint. I am able to get the sales order/item for a complaint using crm_order_read FM. Is there anyway to get the PO based on this SO-item. Are their tables that link these two.
Thanks!

Table CRMD_ORDERADM_I -> Give Item GUID in filed GUID and get the document header guid in field HEADER. Then use function module CRM_ORDER_READ and table ET_SALES to get the Sales Data for the right item. The PO you are interested in can be any of the fields related to PO in this set. Usually it is PO_NUMBER_UC.
Alternately, if you want to use only the table reads use this.
1. Table CRMD_LINK --> get the record with GUID = Item GUID and OBJTYPE_SET = 11 (for Sales Set)
2. Table CRMD_SALES --> get the record with GUID = CRMD_LINK-GUID_SET
Get your PO information from this Sales set record for your item. But since, PO is usually associated with the header, you can do the same as above but with the GUID = Header GUID in the CRMD_LINK table.

How to enable GOS at sales order item

Hi Experts,
I have a requirement where I have to provide the customer an option to see the workflow overview at sales order item level (using Generic Object Services).
I have developed a class based custom workflow for sales order approval and wish to intergrate GOS in VA02/VA03 at item level and not header level. I know that this is possible at header level using Business Object 2032. But I wish to know if this is possible at item level and that too in a class based workflow approach.
Please provide your valuable suggestions.
Thanks,
Ajay

Hi Janos,
Thanks a lot for your reply. The breakpoint wasn't triggered in FM SUSR_USER_LOGONDATA_GET. Please check if the steps I followed are correct.
1. Set external breakpoint in the FM SUSR_USER_LOGONDATA_GET.
2. Run transaction VA02 for an order pending approval.
Am I missing something here ? Do I need any authorization ?
Thanks,
Ajay

How to do INIT for Sales order Itema Data (DS 2LIS_11_VAITM)

Similar Messages

Maybe you are looking for