How to do newline in Validation Script Message

Hi
im trying to write a multiline error message in the Validation Script Message for a textfield but everytime I hit return, i end up at the front of the current line instead of a new line. I've also tried \n with no luck. The only way i've found is by entering the text into notepad and then cut+paste into the Validation Script Message box. Is this a bug with Designer? I have Designer ES 8.2.1.3158.1.475346.
I am aware of how to do it by script ex. this.validationMessage = "line1\nline2" but what i want to is store the Section and field name in the Validation Script Message box and then build the error message ontop via script.
ex.
this.validationMessage = this.validationMessage + "Validation failed due to ....";

Just tested this and it looks like ctrl-enter works.

Similar Messages

Validation Script Message

Is it possible to have the Caption of a field to be referenced in the Validation Script Message?
Or
The focus to be put back on the field?

I'm looking for something similar.
When the user submits the form, I want to run through and verify all the required fields are filled in, and then have a message box pop up saying "Please enter the following required information: *caption of missing field*"
I'm not sure how to manipulate the code in your answer to do this.
Thanks for your help!!

How to catch the exact validation fault message?

Hi experts,
I would like to catch the exact validation fault message.
If the validate operation fails then I get the next SOAP Fault:
<env:Fault xmlns:ns0="http://docs.oasis-open.org/wsbpel/2.0/process/executable">
<faultcode>ns0:invalidVariables</faultcode>
<faultstring>faultName: {{http://docs.oasis-open.org/wsbpel/2.0/process/executable}invalidVariables}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}</faultstring>
<faultactor/>
<detail>
<exception/>
</detail>
</env:Fault>
However In the enterprise manager (audit trail) I can see the next message at the failed validate operation:
Invalid data: The value for variable "req_ProcessAdjustmentOp", part "bodyUPI" does not match the schema definition for this part Invalid text '?' in element: 'date'. The invalid xml document is shown below:
I would like to send back this message to the service consumer as it contains more information about the error. How could I do that? I've already tried the ora:getFaultAsString() function but I got the original fault.
Thanks,
Viktor

Hi Arik,
I tried to catch the invalidVariables exception but I couldn't... Here is my BPEL source would you be so kind to have a look at it?
Thanks!
    <scope name="Scope_validate_req_ReceiveAdjustmentOp" exitOnStandardFault="no">
      <variables>
        <variable name="v_RuntimeFaultMessage" messageType="bpelx:RuntimeFaultMessage"/>
      </variables>
      <faultHandlers>
        <catch faultName="bpel:invalidVariables"
               faultVariable="v_RuntimeFaultMessage"
               faultMessageType="bpelx:RuntimeFaultMessage">
          <sequence>
            <empty name="Empty2"/>
            <assign name="Assign1"
                    xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable">
              <copy>
                <from>$v_RuntimeFaultMessage.detail</from>
                <to>$f_validate</to>
              </copy>
            </assign>
            <rethrow name="Rethrow1"
                     xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"/>
          </sequence>
        </catch>
        <catch faultName="bpelx:invalidVariables"
               faultVariable="v_RuntimeFaultMessage"
               faultMessageType="bpelx:RuntimeFaultMessage">
          <sequence name="Sequence5">
            <empty name="Empty3"/>
            <assign name="Assign1">
              <copy>
                <from>$v_RuntimeFaultMessage.detail</from>
                <to>$f_validate</to>
              </copy>
            </assign>
            <rethrow name="Rethrow1"/>
          </sequence>
        </catch>
      </faultHandlers>
      <sequence name="Sequence4">
        <if name="by_operation">
          <documentation>sv_operation = "ProcessAdjustment"</documentation>
          <condition>$sv_operation = $C_OP_ProcessAdjustment</condition>
          <sequence name="Sequence6">
            <empty name="Empty4"/>
            <validate name="Validate_req_ReceiveAdjustmentOp"
                      variables="req_ProcessAdjustmentOp"/>
          </sequence>
          <elseif>
            <documentation>sv_operation = "ProcessReceipt"</documentation>
            <condition>$sv_operation = $C_OP_ProcessReceipt</condition>
            <empty name="Empty1"/>
          </elseif>
        </if>
      </sequence>
    </scope>

How to set a dynamic validation message in javascript

Hi,
I am using the "validate" event on a field, along with the "script message" field, to make a validation and send a message to the user if the test fails.
- Is it possible to define parameters in this message, for example "field &1 is invalid" where we replace &1 by the name of a field?
- Is it possible to send 2 different messages (I guess it's like using a message &1)?
- What is the best practice according to your experience?
Notes:
- I am aware of the xfa.host.messageBox, but I'd like to keep Adobe logic for validations (am I wrong? why?)
- I also saw the possibility of binding a field from the context, to the message field, but I found that it was not very clean to do this way (if even possible)
Thx !

According to the tests I did since yesterday, it is very difficult to use the "validation script message" (in the "value" tab of a "text input" field, within a dynamic table), for sending a dynamic message.
I abandon, and prefer to use use
xfa.host.messageBox( "dynamic message text" )
For information, I could change the message during "validate" event, with a rather complex algorithm.
Unfortunately, when a table row is just added (dynamically, with a button), though the message has been changed, it displays the original value. When I change the field again, the changed validation message is taken into account. I don't know why.
Edited by: Sandra Rossi on Jul 24, 2009 9:01 AM : it's only to say that since then, this was the only solution! Question closed

Validations in message mapping

Hi,
How can we do different validations in message mapping
and how can we trap them
Pls suggest blogs.
Regards

Hi,
you need to model them yourself
with some standard functions like:
- length
- if
- ifwithoutelse
etc
Regards,
michal

Validation Error Message in OBPM 10GR3 Presentations

Hi all,
I have a presentation which has some fields as REQUIRED Fields... For e.g. the From Date field is required...
I select "YES" for the Required option in the properties tab for that field in the presentation and also put a Validation Error Message which says " From Date Required".
I thought that the Validation Error Message would show up when the date is no selected or filled..
But instead the name of the variable used showed up.. i.e. TestObjectFromDate..
Why is that so?
How can I make the Validation Error Message show up instead?

No this sounds odd, but you might find it's easier not to use the "Required" property for BPM Object presentation text fields.
Try making the Submit button on the form invoke a method (instead of the default "submit" action). In the method, try this:
if someField = null || someField = "" then
    // set the background of the field to red
    setBackgroundColor this
              using componentId = "someFieldName",
                         color = "Red"
    focus("someFieldName")
    setVisible this
      using componentId = "errorTextField",
          visible = true,
          collapsed = false
    someErrorText = "Please enter a value in the field highlighted below"
else
    submit("Submit")
endThis would put your cursor in the offending field and make its background red. It also would make a text field visible on the presentation and set its value.
This assumes that "someErrorText" is a String attribute of your BPM Object that is placed somewhere on the UI.
Dan

ExecValidate, but silently? (no validation/empty message boxes!!)

Hi All
I want to check if all fields are valid and filled in.
I use execValidate().
However, executing execValidate means all the validation script messages and empty messages are also displayed.
Is there any way of checking for validity, but without the annoying message boxes popping up?
Thanks,
Shiv

Hi Niall,
Thanks for your response, but I'm already using LC Designer ES2, and my form target is Adobe Reader 9.1.
I have a hidden boolean inside my form that I use in the following way :
On the preSave event, I put the execValidate() result in my boolean to know if the form is "valid" or not. The form is filled in a "disconnected" mode, so there is no submit button, etc.
What I want is the "execValidate()" to be silent for the user, so that I can have the info without any popup.
However, I need those pop-up because there is a button "validate form" which is for the user, and i need custom warnings for some fields.
Regards,
Thomas

Error message on validation script

Hi Guys,
    I created a validation script for MA to check the fill on the extention collection as below.
productColln = doc.getExtensionCollection("PROD_HIER");
productItr= productColln .iterator();
for(member : productItr){
          if(!hasValue(member.get("fieldA"))){
               exception.chainAtEnd(member.createApplicationException("fieldA","Please enter Max Value"));
          if(!hasValue(member.get("fieldB"))){
               exception.chainAtEnd(member.createApplicationException("fieldB","Please enter the Unit Price"));
if(exception.getChain() != null){
    throw exception.getChain();
    1. When the 'fieldA' and 'filedB' are blank, the error message is shown only for 'fieldA'. After i complete 'fieldA' the error message will be shown for 'fieldB'. It seem like it will show only for first one which is put in the chain. I would like the message to show all message in the chain.
    2. When the error message is shown the both fileds are covered by the red line but i would to have the red ' ! ' appear on the tab (ex. for product tab) as well. How can i implement that?
Noppong,
Thank you in advance

Hi Noppong
My understanding is once system gets an exception, it skips to throw statement and the subsequent exceptions, if any ,are skipped. Use of chain exception allows one to write one throw statement in the code rather than multiple throws at various points.
I may be wrong so appreciate if someone can validate this.
Regards
Mudit Saini

How to validate a date in a validation script

I have a date field for which I have set a validation pattern using its Object palette i.e. Object > Value tab > Validation Pattern > Validation tab. The validation pattern I have there is simply 'date{YYYY-MMM-DD}' with an error message set in the Validation Pattern Message box.
How do I perform this same validation using a javascript in the Validation event?
I'd like to use a script instead so that I can better control when this validation will be performed.
Thanks!!
Marc

Marc:
If your field has a display picture clause, then you can detect if it formatted correctly by looking at field.formattedValue
Specifically, if the value cannot be formatted, the formattedValue will be the same as the rawValue (unformatted).
So a validation script that specifies:
this.formattedValue !== this.rawValue;
should detect invalid dates.
See: http://blogs.adobe.com/formfeed/2011/06/understanding-field-values.html
good luck
John

How to get the handle of the Validation Failure Message Popups.

Hi,
I'm using Jdev 11.1.2.0
I have added validation rule(less than system date) and failuremessage("date should not after currentdate") on the date field in EO.
when I enter greated than the sysdate in date field in page, I'm getting validation failure message in a popup with ok button. its working good.
but when i click on the popup ok button, the focus should go the date field again and it is higlighted.
So, how to get the handle of the popup's ok buton? and how to highlight the datefield after clicking the popup's ok button?
Any suggestion would be appreciated.
thank you.

if i understood correclty means,
i hope that, error popup is provided by framework.. how could be possible? to catch the error popup ok button.
am not well aware of catching the error popup which is provide by framework..
but i had answer for your part of the question,
if the condition go off false means you force the cursor into date field. this is can be done using 'javascript'. unless using script you can't do that. ADF doesnt provide any force focusing feature.
please google how to focus the field.
https://blogs.oracle.com/jdevotnharvest/entry/how_to_programmatically_set_focus
http://technology.amis.nl/2008/01/04/adf-11g-rich-faces-focus-on-field-after-button-press-or-ppr-including-javascript-in-ppr-response-and-clientlisteners-client-side-programming-in-adf-faces-rich-client-components-part-2/
http://lspatil25.blogspot.in/2012/04/adf-default-cursorfocus-to-input-field.html
http://donatas.nicequestion.com/2012/04/component-to-set-initial-focus-in-adf.html

How to implement validations in message mapping?

Hi experts,
I have a simple requirement:
I have a simple synchronous scenario:
SOAP -> XI -> RFC
In a message mapping, one of the fields in the source message is of type String.
However, the target application (RFC) does not expect a non-numeric characters in this string.
My question is how can I perform the validation in XI and tell the sender that this field contains Non-numeric characters?
Please help.
Thanks.
Ron

> Ron,
>
> >>With a RunTime Exception thrown, how can I tell
> the sender an error has occured?
>
> Sure. You can do this with out a BPM. You need to
> configure alerts for this. If you configure ALERTS
> and SCOTT, this will send an email of the errors
> occuring in your scenario.
>
> For configuring and trouble shooting alerts check
> these
>
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
> 2327
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/
> 2328
>
> Regards,
> Jai Shankar
Hi Jai
I already have alerts configured.
But what I had in mind is to send a response to the sender (The sender is waiting for a reply since this is synchronous), instead of telling the sender through an alternative means such as email, sms, etc.
Is this possible?

How to do Front End Validation for JSP Forms using Java Script with 9iJD...

How to do Front End validation using 9iJD. Any wizard is there. We need to do the val. using Java Script. If its not available, please include that in the Production Release.

Thanks a lot. When is the Production Release is scheduled. Please tell us whether itll be available for Free Download. Bec, we couldnt buy. Bec, if its working fine with all the options without any bug only, we can ask our company to buy 9iJD by stating the advantages. Just explain us.

I get slow script message how do stop this ?

I get a slow script message how do I stop this ? I read to open terminal app. in utilities folder then cut and paste message to add debug but can't figure how to do that

Welcome to Apple Support Communities. We're users here and don't speak for "Apple Inc."
If you haven't already tried again and been able to successfully connnect, try again. If necessary, Quit Mail, and re-open it.
Some errors aren't caused by anything we're doing wrong, or problems with our equipment.
Major web service providers like Yahoo! experience 'downtime' now and then, sometimes planned, sometimes unplanned.
During the time you posted your question (about 18 hours before I post this message with the chart) Yahoo was 'down' as indicated by end-user reports, and illustrated by the colorful bands in the chart below.
www.downrightnow.com is just one of several places where the downtime of popular internet destinations is tracked.

How to pass idoc parameters in a validation script? (10gR3 site studio)

Obviously idoc won't work in the actual validation script, so I'd like to use it to generate the parameters to pass to a custom function.
If I add  as a parameter in design mode, it'll be added as: &lt;!--$siteId--&gt; which doesn't work.
If I manually add  to the parameter code in Source mode, this works just fine. However, once I enter design mode, Designer strips it out and now I have no parameter.
Is there any way to somehow escape the less than/greater than symbols in Design mode?
It's really unfortunate how the contributor windows are static HTML pages that don't retain what site they're on. Maybe this has changed in the 10gR4.

Sorry I don't have an answer for you, but I wanted to say that we have had problems with Design mode in general and don't use it anymore. Switching between Source and Design has cause multiple errors in our Site Studio template. We do all of our Designer editing in Source mode. Any actual design work is done in an external editor and the HTML source is then brought over into Site Studio in Source mode.
I was disappointed when 10gR4 came out and Oracle said they did no significant changes (improvements) to Site Studio Designer application.

Since I downloaded version 4 of Firefox, I'm having the following problems: Extremely slow at loading all web sites, can't view PDF files from web sites, and lots of unresponsive script messages. How can I fix this?

I downloaded version 4 of Firefox this week and have been having problems since. Firefox is now extremely slow at loading all web sites. Trying to view PDF files from web sites crashes Firefox. I'm getting lots of unresponsive script messages. How can I fix this?

I downloaded version 4 of Firefox this week and have been having problems since. Firefox is now extremely slow at loading all web sites. Trying to view PDF files from web sites crashes Firefox. I'm getting lots of unresponsive script messages. How can I fix this?

How to do newline in Validation Script Message

Similar Messages

Maybe you are looking for