How to do SUBTOTAL AND TOTAL in Main Window of SAPSCRIPT.

Hello Friends,
I am modifying standard SAPSCRIPT of packing slip. My client wants a subtotal and total in Main Window of Script for Eg. (They want Material Number wise Subtotal and finally Grandtotal at bottom in Main Window)
Now i got stucked up here how to do it ?
here is my sample code.
LOOP AT XVBPLP WHERE VENUM = SHENR.
IF XVBPLP-POSNR IS INITIAL.
    Versandelement
      PERFORM PACKING_TREE USING XVBPLP-UNVEL.
    ELSE.
    Lieferposition (Anteil)
      VBPLP = XVBPLP.
CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        ELEMENT = 'DELPOS'.                     "Main Window call
clear vbplp.
ENDLOOP.
Pls guide me for the same.

HI,
For the Line items, put a ELEMENT in the Smartform, and you will call this with in the LOOP and ENDLOOP, so here with in the LOOP count the TOTAL value.
then create new element after the Line item Element, and call this Element after the Line items prints,
/E LINE_ITEM
&1& &2 & &3& " This will be in the loop and you need to caliculate the totla here
/E SUB_TOTAL.
&SUb_TOTAL& " After all the line items pritns then call this Element
Regards
Sudheer

Similar Messages

How to show subtotal and total of groups in ssrs

I am making an SSRS report in following format:
DIVISION
SECTOR
DEPARTMENT
Division contain Sector and Sector contain Department so resulting report becomes something like following. A figure is being shown against each Department and I want to show SUBTOTAL of each Sector right against Sector column (by adding all Department coming
under it) and then show TOTAL of Division (by adding all Department or all Sector) at the end. How do I show these totals?
Division1
Sector1 SUBTOTAL HERE (for e.g. 19,000)
Department1 10,000
Department2 9,000
Sector2 SUBTOTAL HERE (for e.g. 8,000)
Department3 8,000
Sector3 SUBTOTAL HERE (for e.g. 13,000)
Department4 10,000
Department5 1,000
Department6 2,000
TOTAL HERE (for e.g. 40,000)
Division2
Sector4 SUBTOTAL HERE (for e.g. 3,500)
Department7 3,500
TOTAL HERE (for e.g. 3,500)
My report is displaying all divisions, sectors and departments with figures like above (I am using groups ) but how do I display SUBTOTAL and TOTAL?

Hi ,
You can use add total in this case.
use below link;
http://msdn.microsoft.com/en-in/library/ms170712.aspx
To add totals to a report
    Switch to Design view.
    Right-click the data region cell that contains the field [LineTotal], and click Add Total.
    This adds a row with a sum of the dollar amount for each order.
    Right-click the cell that contains the field [Qty], and click Add Total.
    This adds a sum of the quantity for each order to the totals row.
    In the empty cell to the left of Sum[Qty], type the label "Order Total".
To add a daily total to a report
    Right-click the Order cell, point to Add Total, and click After.
    This adds a new row containing sums of the quantity and dollar amount for each day, and the label "Total" in the Order column.
    Type the word Daily before the word Total in the same cell, so it reads Daily Total.
    Select the Daily Total cell, the two Sum cells and the empty cell between them.
To add a grand total to a report
    Right-click the Date cell, point to Add Total, and click After.
    This adds a new row containing sums of the quantity and dollar amount for the entire report, and the Total label in the Date column.
    Type the word Grand before the word Total in the same cell, so it reads Grand Total.
    Select the Grand Total cell, the two Sum cells and the empty cells between them.
Thanks
Please Mark This As Answer or vote for Helpful Post if this helps you to solve your question/problem.

How to get subtotal and total per project in PS Module cl_gui_alv_grid

Hi all,
i have a requirement of getting Subtotals and totals of few column in the alv grid. as i have already used cl_gui_alv_grid class to display the grid , so what excatly i have to follow to get the values.
i have tried with :
wa_sort    TYPE lvc_s_sort
    wa_sort-spos = '1'.
    wa_sort-fieldname = 'POST1'.
    wa_sort-up = 'X'.
    wa_sort-subtot = 'X'.
    APPEND wa_sort TO t_sort.
    CLEAR: wa_sort.
And in fieldcat have passed X to do_sum field.
and
      CALL METHOD grid1->set_table_for_first_display
     EXPORTING
           is_variant                    = w_variant
           i_save                        = 'A'
           is_layout                     = t_layout
           it_toolbar_excluding          = t_toolbar_excluding
     CHANGING
        it_outtab                        = it_final_1[]
        it_fieldcatalog                  = t_fieldcat
        it_sort                          = t_sort
     EXCEPTIONS
       invalid_parameter_combination     = 1
       program_error                     = 2
       too_many_lines                    = 3
       OTHERS
But i coudnt see any subtotal column and total column in the grid.
please help

But i coudnt see any subtotal column and total column in the grid.
please help
you did every thing correct.
but if you want the subtotals you have to do one more thing.
that is you need to mention the do_sum = 'X'. for the columns which you want to see the subtotals(quantities, currency etcc) in the fieldcatalog.

Display 6 line items and total in main window

Hi,
I want to display only 6 line items in main window( on first page and also total of the main window of first page), and consecutively in all the apges i want to display only 6 line itms and total in each page of main window, how to write logic for this.
Thanks,
Donlad

Hi r u talking about Snmartform if yes
Let us take the page you are using as PAGE1, you can achuve this using the Command Node. call the same page after 6 items as follows
1.create Table.--->Main area , Header and footer.
2.Declare a variable V_count type sy-tabix.
a.Now click on the table tab>Main Area>right Create>Command (insert a command node after the Line type you r using to print the data), in this COMMAND node give the condition V_COUNT = 6. GOTO>PAGE1 (it maens you r triggering the new page after the 6 lines.
b. after this command noder insert the Program lines heate increase the value of V_COUNT.
Maintain another variable the use that for page totals...
total can be doneautomatically by using the TABle-->CALCULATION TAB.
let me know if you more clear info, iam sure u r problem willbe solved.

Display of total in Main window in Sapscript

Hello guys,
can you please help me with the following?
Working with Standard transaction F.2c standard program RFDUZI00 whereby I have to make a copy of the standard Sapscript F_DUZI_01 for a specific company code and modify its layout. Requirement is that:
On the 1st page, the table should contain a maximum of 12 lines.
On the following page (if several pages are required), the subtotals and the sum total cannot be displayed alone on the last page. If so, the 2 last lines of the previous page should be reported on the last page (and, of course, deleted from the page before the last page)
Can please anyone who's done smething similar help me to implement the above?

Hi
U can create a secondary window tyoe VAR placed in the footer of the oages when u print the subtotal or the total
Max

How to do subtotal and grand total as per currency in a tree ALV

Hi Experts,
I am doing a tree ALV for SD output. I met an urgent problem that is how to do subtotal and grand total on the field (netwr) as per currency (waerk) in the tree ALV. I am using below codes to create the tree ALV.
    l_tree_container_name = 'CCONTAINER1'.
    CREATE OBJECT objCustomContainer
        EXPORTING
              container_name = l_tree_container_name
        EXCEPTIONS
              cntl_error                  = 1
              cntl_system_error      = 2
              create_error               = 3
              lifetime_error              = 4
              lifetime_dynpro_dynpro_link = 5.
create tree control
    CREATE OBJECT objTree1
      EXPORTING
          parent              = objCustomContainer
          node_selection_mode = cl_gui_column_tree=>node_sel_mode_single
          item_selection      = ' '
          no_html_header      = 'X'
          no_toolbar          = ''
      EXCEPTIONS
          cntl_error                   = 1
          cntl_system_error       = 2
          create_error                = 3
          lifetime_error               = 4
          illegal_node_selection_mode = 5
          failed                       = 6
          illegal_column_name          = 7.
    DATA l_hierarchy_header TYPE treev_hhdr.
    call method buildHierarchyHeader
      IMPORTING
        p_hierarchy_header = l_hierarchy_header.
Build fieldcatalog
    call method buildFieldcatalog.
    CALL METHOD objTree1->set_table_for_first_display
        EXPORTING
          is_hierarchy_header = l_hierarchy_header
        CHANGING
          it_fieldcatalog     = l_fieldcatalog
          it_outtab            = lt_order.
    CALL METHOD objTree1->update_calculations.
    CALL METHOD objTree1->frontend_update.
filling fieldcatalog,
      LS_FIELDCATALOG-FIELDNAME = 'NETWR'.
      LS_FIELDCATALOG-SCRTEXT_S = 'Net Value'.
      LS_FIELDCATALOG-COL_POS = l_pos.
      LS_FIELDCATALOG-OUTPUTLEN = 15.
      LS_fieldcatalog-do_dum= 'X'.
      LS_FIELDCATALOG-DATATYPE = 'CURR'.
      APPEND LS_FIELDCATALOG TO l_FIELDCATALOG.
      CLEAR LS_FIELDCATALOG.
      l_pos = l_pos + 1.
I could see the subtotal and grandtotal in tree ALV but they are simply sumed up regardless different currency.
Thank you very much for your kindly helps.
Yu

hi
good
go through this report and work accordingly.
REPORT ZALV.
TYPE-POOLS: SLIS.
DATA: G_REPID LIKE SY-REPID,
GS_PRINT            TYPE SLIS_PRINT_ALV,
GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
GT_EVENTS           TYPE SLIS_T_EVENT,
GT_SORT             TYPE SLIS_T_SORTINFO_ALV,
GS_LAYOUT           TYPE SLIS_LAYOUT_ALV,
GT_FIELDCAT         TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT_LN LIKE LINE OF GT_FIELDCAT,
COL_POS TYPE I.
DATA: BEGIN OF ITAB,
FIELD1(5) TYPE C,
FIELD2(5) TYPE C,
FIELD3(5) TYPE P DECIMALS 2,
END OF ITAB.
DATA: BEGIN OF ITAB1 OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB1.
DATA: BEGIN OF ITAB_FIELDCAT OCCURS 0.
INCLUDE STRUCTURE ITAB.
DATA: END OF ITAB_FIELDCAT.
Print Parameters
PARAMETERS:
            P_PRINT AS CHECKBOX DEFAULT ' ', "PRINT IMMEDIATE
            P_NOSINF AS CHECKBOX DEFAULT 'X', "NO SELECTION INFO
            P_NOCOVE AS CHECKBOX DEFAULT ' ', "NO COVER PAGE
            P_NONEWP AS CHECKBOX DEFAULT ' ', "NO NEW PAGE
            P_NOLINF AS CHECKBOX DEFAULT 'X', "NO PRINT LIST INFO
            P_RESERV TYPE I.                  "NO OF FOOTER LINE
INITIALIZATION.
G_REPID = SY-REPID.
PERFORM PRINT_BUILD    USING GS_PRINT.      "Print PARAMETERS
START-OF-SELECTION.
TEST DATA
MOVE 'TEST1' TO ITAB1-FIELD1.
MOVE 'TEST1' TO ITAB1-FIELD2.
MOVE '10.00' TO ITAB1-FIELD3.
APPEND ITAB1.
MOVE 'TEST2' TO ITAB1-FIELD1.
MOVE 'TEST2' TO ITAB1-FIELD2.
MOVE '20.00' TO ITAB1-FIELD3.
APPEND ITAB1.
DO 50 TIMES.
APPEND ITAB1.
ENDDO.
END-OF-SELECTION.
PERFORM BUILD.
PERFORM EVENTTAB_BUILD CHANGING GT_EVENTS.
PERFORM COMMENT_BUILD CHANGING GT_LIST_TOP_OF_PAGE.
PERFORM CALL_ALV.
FORM BUILD.
DATA FIELD CATALOG
Explain Field Description to ALV
DATA: FIELDCAT_IN TYPE SLIS_FIELDCAT_ALV.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD1'.
FIELDCAT_LN-TABNAME   = 'ITAB1'.
*FIELDCAT_LN-NO_OUT    = 'X'. "FIELD NOT DISPLAY, CHOOSE FROM LAYOUT
FIELDCAT_LN-KEY       = ' '.   "SUBTOTAL KEY
FIELDCAT_LN-NO_OUT    = ' '.
FIELDCAT_LN-SELTEXT_L = 'HEAD1'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME = 'FIELD2'.
FIELDCAT_LN-TABNAME   = 'ITAB1'.
FIELDCAT_LN-NO_OUT    = 'X'.
FIELDCAT_LN-SELTEXT_L = 'HEAD2'.
APPEND FIELDCAT_LN TO GT_FIELDCAT.
CLEAR FIELDCAT_IN.
FIELDCAT_LN-FIELDNAME     = 'FIELD3'.
FIELDCAT_LN-TABNAME       = 'ITAB1'.
FIELDCAT_LN-REF_FIELDNAME = 'MENGE'. "<- REF FIELD IN THE DICTIONNARY
FIELDCAT_LN-REF_TABNAME   = 'MSEG'. "<- REF TABLE IN THE DICTIONNARY
FIELDCAT_LN-NO_OUT        = ' '.
FIELDCAT_LN-DO_SUM        = 'X'.   "SUM UPON DISPLAY
APPEND FIELDCAT_LN TO GT_FIELDCAT.
DATA SORTING AND SUBTOTAL
DATA: GS_SORT TYPE SLIS_SORTINFO_ALV.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD1'.
GS_SORT-SPOS      = 1.
GS_SORT-UP        = 'X'.
GS_SORT-SUBTOT    = 'X'.
APPEND GS_SORT TO GT_SORT.
CLEAR GS_SORT.
GS_SORT-FIELDNAME = 'FIELD2'.
GS_SORT-SPOS      = 2.
GS_SORT-UP        = 'X'.
*GS_SORT-SUBTOT    = 'X'.
APPEND GS_SORT TO GT_SORT.
ENDFORM.
FORM CALL_ALV.
ABAP List Viewer
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME = 'ITAB1'
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GT_FIELDCAT[]
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = GT_SORT[]
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = GT_EVENTS[]
IT_EVENT_EXIT =
IS_PRINT = GS_PRINT
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = ITAB1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM.
HEADER FORM
FORM EVENTTAB_BUILD CHANGING LT_EVENTS TYPE SLIS_T_EVENT.
CONSTANTS:
GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE'.
*GC_FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE'.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            I_LIST_TYPE = 0
       IMPORTING
            ET_EVENTS   = LT_EVENTS.
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
define END_OF_PAGE event
READ TABLE LT_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
                         INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO LT_EVENTS.
ENDIF.
ENDFORM.
FORM COMMENT_BUILD CHANGING GT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
DATA: GS_LINE TYPE SLIS_LISTHEADER.
CLEAR GS_LINE.
GS_LINE-TYP = 'H'.
GS_LINE-INFO = 'HEADER 1'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
CLEAR GS_LINE.
GS_LINE-TYP = 'S'.
GS_LINE-KEY = 'STATUS 1'.
GS_LINE-INFO = 'INFO 1'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
GS_LINE-KEY = 'STATUS 2'.
GS_LINE-INFO = 'INFO 2'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
CLEAR GS_LINE.
GS_LINE-TYP = 'A'.
GS_LINE-INFO = 'ACTION'.
APPEND GS_LINE TO GT_TOP_OF_PAGE.
ENDFORM.
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
            IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
WRITE: SY-DATUM, 'Page No', SY-PAGNO LEFT-JUSTIFIED.
ENDFORM.
FORM END_OF_PAGE.
WRITE at (sy-linsz) sy-pagno CENTERED.
ENDFORM.
PRINT SETTINGS
FORM PRINT_BUILD USING LS_PRINT TYPE SLIS_PRINT_ALV.
LS_PRINT-PRINT              = P_PRINT. "PRINT IMMEDIATE
LS_PRINT-NO_PRINT_SELINFOS = P_NOSINF. "NO SELECTION INFO
LS_PRINT-NO_COVERPAGE       = P_NOCOVE. "NO COVER PAGE
LS_PRINT-NO_NEW_PAGE        = P_NONEWP.
LS_PRINT-NO_PRINT_LISTINFOS = P_NOLINF. "NO PRINT LIST INFO
LS_PRINT-RESERVE_LINES      = P_RESERV.
ENDFORM.
thanks
mrutyun^

How to show underline and overline for subtotal and total row in Cross tab

Hi,
I am developing cross tab report where i need to show undeline and overline in data for subtotal row and total row so as to distuingish normal rows from subtotal and total row.
Thanks,
Mahesh

Hi BIPuser,
i looked at the updated template, we need undeline on the data corresponding to subtotal row for ex. row 2.
We have xml tag in xml data UNDERLINE_AFTER='Y' and UNDERLINE_BEFORE='Y' then we need to show underline and overline on data i.e on 121,122,123,221,222,223 ,not on ROW2.
value1 value2
row1 200 300
row2 400 700
we need underline and oveline on data 400 and 700 since it is subtotal data based on condition UNDERLINE_AFTER='Y' and UNDERLINE_BEFORE='Y'.
Hope you understand.
Please help!!!!!!
Thanks,
Mahesh
Edited by: user13450806 on Feb 2, 2011 12:14 AM

My subtotal and total text in ALV list does not show...

Hello Experts,
Please see my code below on what I am doing wrong. I want to display the subtotal and total text in my ALV list.
CLEAR gs_layout.
    gs_layout-colwidth_optimize = 'X'.
    gs_layout-zebra             = 'X'.
    gs_layout-subtotals_text    = 'Subtotal'.
    gs_layout-totals_text       = 'Total'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
*       I_INTERFACE_CHECK                 = ' '
*       I_BYPASSING_BUFFER                = ' '
*       I_BUFFER_ACTIVE                   = ' '
        i_callback_program                = sy-repid
*       I_CALLBACK_PF_STATUS_SET          = ' '
*       I_CALLBACK_USER_COMMAND           = ' '
*       I_CALLBACK_TOP_OF_PAGE            = ' '
*       I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
*       I_CALLBACK_HTML_END_OF_LIST       = ' '
*       I_STRUCTURE_NAME                  =
*       I_BACKGROUND_ID                   = ' '
*       I_GRID_TITLE                      =
*       I_GRID_SETTINGS                   =
        is_layout                         = gs_layout
        it_fieldcat                       = gt_fieldcat
*       IT_EXCLUDING                      =
*       IT_SPECIAL_GROUPS                 =
        it_sort                           = gt_sort
*       IT_FILTER                         =
*       IS_SEL_HIDE                       =
*       I_DEFAULT                         = 'X'
*       I_SAVE                            = ' '
*       IS_VARIANT                        =
        it_events                         = gt_events
*       IT_EVENT_EXIT                     =
        is_print                          = gs_print
*       IS_REPREP_ID                      =
*       I_SCREEN_START_COLUMN             = 0
*       I_SCREEN_START_LINE               = 0
*       I_SCREEN_END_COLUMN               = 0
*       I_SCREEN_END_LINE                 = 0
*       I_HTML_HEIGHT_TOP                 = 0
*       I_HTML_HEIGHT_END                 = 0
*       IT_ALV_GRAPHICS                   =
*       IT_HYPERLINK                      =
*       IT_ADD_FIELDCAT                   =
*       IT_EXCEPT_QINFO                   =
*       IR_SALV_FULLSCREEN_ADAPTER        =
*     IMPORTING
*       E_EXIT_CAUSED_BY_CALLER           =
*       ES_EXIT_CAUSED_BY_USER            =
      TABLES
        t_outtab                          = lt_output_fin
     EXCEPTIONS
       program_error                     = 1
       OTHERS                            = 2.
    IF sy-subrc <> 0.
*      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
*              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.

Use on Thread. Don't Cross post. and Follow the Rules.

How can I create more than one main window in a page of SAP SCRIPT?

How can I create more than one main window in a page of SAP SCRIPT? If anybody helps me I will be obliged.
Regards,
Subhasish

Hi Ganguly,
It is possible to have more than one main window in a same page.
You create a main window and simply you copy and past it in the same page.. it will create first main window name as MAIN and other main windows as MAIN01,MAIN02.... up to MAIN99.
Contets flow from MAIN , MAIN01, MAIN02.......................MAIN99. contents after filling the current window it flows to next window(by default, you skip as well with some keyword not sure could be NEW-WINDOW)
you want print the main window data twice? or you want to create two main window in the same page ?
1. give two copies in the no of copies in the output type screen ( Which pop up is coming after excute the program ).
2. create two page with the same script form.
3. you can write the coding inside the program to print twice the same page.
Hope this information use full to you..

How to transfer video and audio files from windows PC to new ipad?

How to transfer video and audio files from windows PC to new ipad?

iTunes: Syncing media content to iOS devices and iPod
Sync with iTunes.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Music Tab on the right.
Click on all of the albums, artists, playlists that you want to sync
Click on the Sync Music Heading.
Click on Apply in the lower right corner of iTunes
Follow the same procedure for Movies.

How do i seperate media browser from main window in Pro X

How do i separate media browser from main window in Pro X, it only lets me drag project audio tab from main window..
Regards
James.

hello, this is usually caused by adware on your pc.
please run a scan of your system with [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] & also manually check that you don't have any suspicious entries like 3rd-party-toolbars presently installed under ''firefox > addons > extensions'' (adware like babylon also might install some unwanted stuff that comes under the names "Browser Manager", "Browser Protector", "Bprotector", "Object Installer", etc.) or in the windows control panel > programs section.
afterwards install the search reset addon - it will revert the most common customziations those adware programs do in firefox back to the default: https://addons.mozilla.org/firefox/addon/searchreset/
[[Remove a toolbar that has taken over your Firefox search or home page]]

Printing digital signature in main window of sapscript at some location

Hi,
I want to print graphics in main window in sapscript. I want to position the graphic ( signature) at some position (preferably right aligned ). How to do that? Can we do that in .bmp graphics. In case we use .tiff format , how to do it. Tell me the steps involved as I have never used RSTXLDMC to upload .tiff files.
Regards,
D.Mallick

Hi
Just open rstxldmc in se38 and execute.
It will gve you a screen. You need to fill the first two blocks only. Remaining are optional.
File Name : Give pathe+name of your .tiff file
Type         : Bcol for colour     and bmon for mono
Resolution      : say 75 (as you wish)
Second block
   Text name :   only replace astrick by your name ZHEX-MACRO- has to be there.
Actually this program will convert .tiff file into text file.
you can include this text file in any window. Text name is the name of the text file generated
no more changes
Now execute.
Now you can use this text file ZHEX-MACRO-name   in any windoow
If useful, give me points
cheers
vamshi

Box in MAIN window of sapscript keeps misaligning...

Hello Experts,
I am currently modifying a sapscript and inside the MAIN window, there is a box command that 'boxes' a
static text. But the problem is, the box misaligns since the number of line items is dynamic.
So, how can I make the box command to just 'box' the static text correctly even though the line item is
dynamic?

HI,
Declare the Box and Static text in the main window with a new text element after the text element of the line items . so it will print it in the end when all of the Line items are printed..
(or)
Just create another script with the BOX and the text you want inside the BOX. i.e. this becomes another script which is separate from the line items you are printing there.
call this script in your driver program with start_form FM.
REPORT YTEST_SCRIPT.
DATA:
ITAB TYPE TABLE OF SFLIGHT,
FS TYPE SFLIGHT.
SELECT * FROM SFLIGHT INTO TABLE ITAB.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
    FORM                              = 'ZSCRIPT_TEST'.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ITAB INTO FS.
CALL FUNCTION 'WRITE_FORM'
    EXPORTING
      ELEMENT                        = 'TEST'
      WINDOW                         = 'MAIN'.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CALL FUNCTION 'END_FORM'.      "---------->Ends the previous form
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'START_FORM'    "------------> Starts your new script with BOX and Static text
EXPORTING
    FORM                   = 'ZSCRIPT_TEST1'.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
    ELEMENT                        = 'TEST'
    WINDOW                         = 'MAIN'.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
This will print the BOX and the Static text in a new page after the line items got printed..
This will solve your issue...
Thanks&Regards
Sarves

ALV GRID: How to change Subtotal and Main total values in standard row

Hi Experts,
By using SORT-SUBTOT = 'X' and FIELDCATALOG-DO_SUM    = 'X', I will get subtotal and Main total.
My requiremnt is I need be calculate values manually and pass the calculated values to subtotal and maintotal.
is it possible in ALV GRID?
By adding extra row we will do this but I am looking standard subtotal and maintotal row change.
Thanks in advance,
Mahe

Hi,
With function REUSE_ALV_GRID_DISPLAY you cannot do this.
It´s possible if you create a class inherited from cl_gui_alv_grid and rewrite the method set_data_table, you can do this. Like:
CLASS xgrid DEFINITION INHERITING FROM cl_gui_alv_grid.
PROTECTED SECTION.
    METHODS: set_data_table REDEFINITION.
ENDCLASS.                    "xgrid DEFINITION
CLASS xgrid IMPLEMENTATION.
METHOD set_data_table.
* ....MODIFY data_table ...
    CALL METHOD super->set_data_table
      CHANGING
        data_table = data_table.
ENDMETHOD.                    "set_data_table
ENDCLASS.                    "xgrid IMPLEMENTATION
DATA:    grid TYPE REF TO xgrid.
CREATE OBJECT custom_container EXPORTING container_name = mycontainer.
CREATE OBJECT grid EXPORTING i_parent = custom_container.
CALL METHOD grid1->set_table_for_first_display ...
Best regards,
Leandro Mengue

How to calculate subtol and total values in alv.

Hi expert,
I want to calculate the subtol and total values in alv as follows,
example:
   month:    Jan      Fer      Mar    Apr
                  -50       -30      40      -10
                  -20       -13      -12     -10
subtotal      -70       -43      28      -20
                  -10       -10      -10     -10
                  -10       -31      -15     -10
subtotal      -20       -41      -25     -20
total           -90       -84       3       -40
when i put '-' in front of the month,i define the month type c,
and when the type is c,it cann't calculate the subtotals and totals.
how can i do can make the layout like the example.
thanks...
Edited by: Heum Kim on Aug 25, 2008 3:54 AM

The below code is not generic one. I am just looking for generic one. You try to fix it using the similiar approach.
REPORT ZTEST_ALV_DEC.
data: fcat type lvc_s_fcat,
      tfcat type lvc_t_fcat.
data: begin of itab occurs 0,
      carrid(10),
      quan type DEC_16_02_S,
      end of itab.
      itab-carrid = 'AA'.
      itab-quan = '-10000.00'.
      append itab.
fcat-fieldname = 'QUAN'.
fcat-tabname = 'ITAB'.
fcat-decimals_o = 2.
fcat-edit_mask = 'V__,___.__'. "This is not generic
append fcat to tfcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
EXPORTING
   I_CALLBACK_PROGRAM                = sy-repid
   IT_FIELDCAT_LVC                   = tfcat
TABLES
    t_outtab                          = itab
EXCEPTIONS
   PROGRAM_ERROR                     = 1

How to do SUBTOTAL AND TOTAL in Main Window of SAPSCRIPT.

Similar Messages

Maybe you are looking for