How to download run time ABAP dump in production environment

Hello,
I am getting run time ABAP dump in production environment. Please guide me onHow to download run time ABAP dump in production environment?
Also, please tell me how best can analyze that dump. Like there are tools like gdb, purify etc. to analyze problems in other languages.
Regards,
Sameer.

Hi,
Go to ST22, and Double click on the error line, It will show you the detailed analysis.
See the section How to correct the error for details on error correction and the instructions to download the log( you can download in the format you want - HTML would be a nice option).
And there are no tools to analyze errors but ST22 has a large data regarding the location of the error, the reason and the source code which caused. So you need to use the debugger to reproduce the error and check the source code,
Regards
Karthik D

Similar Messages

  • How to send Run time errors alerts to email ?

    Dear Friends,
    I am using SAP CRM ABAP 6.0. I am checking run time errors in ST22 transaction. Usually, i check in morning or evening, based on my free time. I feel, dificully in this. so, i need to configure in somewhere for send this runtime error alerts to my office mail id.
    We are sending report outputs to our office id. But, i dont know, how to send run time errors with log or with out log to emai id?
    thanks in advance.
    Rajagopal
    Chennai - INDIA

    Thanks Dieter.
    Now, i have set the background job as per your suggestions. but, i have below doubts:
    1. I added my office mail id in spool list receipient. This background job alert mail goes to business work place inbox (SBWP). But, i need, in my outlook mail box.
    2. This background job gives all months runtime errors. but, only i need today & yesterday only. I checked in ST22 for create variant. Unfortunately, i did not get option. so, how to set variant?
    Thanks in advance.
    Rajagopal
    Chennai - INDIA.

  • How to download data from abap-ouput to excel sheet with logo

    how to download data from abap-ouput to excel sheet with standard logo
    Edited by: Harish Kasyap on Nov 18, 2008 8:19 AM
    Edited by: Harish Kasyap on Nov 18, 2008 8:20 AM

    For saving the report you can goto System -> List -> Save -> Local File -> Location where you want to save in your presentation server.
    You can also give a option in your selection screen to save the file to Presentation server using FM GUI_DOWNLOAD.
    Hope it helps.
    Thanks,
    Jayant.

  • How to download arabian time zone to my iphone4?

    how to download arabian time zone to my iphone4?

    Not sure exactly what you mean. There is nothing to download to set the time zone: http://help.apple.com/iphone/7/#/iph70825e5ae
    When setting it manually, simply look for a location in the same time zone, if your community isn't listed.

  • How to download face time for my MacBook ?

    how to download face time for my MacBook ?

    Hi,
    Currently FaceTime for Mac is a 99¢ app and only available via "App Store" for Mac.  Make sure you have the latest Mac OS installed (10.6.7), and launch App Store from your dock (you can also access it by clicking on  and choose "App Store...")  you can then purchase it through there.
    -cwdlin

  • Where can I download Run-time engine 6.1 for Mac OS

    When trying to run an executable I receive a message "Could not load LabView Runtime Shared Library: err = -2804, "Labview 6.1 Runtime". I did not see Run-time engine 6.1 for Mac OS 9 available for download. I only saw version 6.0.2. Does anyone know where I can download version 6.1??

    Hi majo008,
    If you click on the 'Drivers and Updates' under 'Option 3' on the Technical Support page (www.ni.com/support), you can select 'All Software Versions' and choose 'LabVIEW >> Run-Time Engine'. This page will then have a link to the LabVIEW 6.1 Runtime Engine for Mac OS.
    Have fun!
    - Philip Courtois, Thinkbot Solutions

  • How to improve run time

    Hi!
    So attached are the codes I had for retrieving data from a network analyzer. I wanted to divide the sweep range into 800 subintervals, to run several times on each sub, and to generate an averaged data point for that subinterval. Now it takes me 30s to run once on each subinterval, so in total that's gonna take me over 20hours, which is way too much... I am just wondering if there's a way to drastically reduce the total run time to, say 1h? Thanks!
    Attachments:
    QCM_new.vi ‏146 KB
    Retrieve_Data.vi ‏154 KB
    Merge and Plot Data Sets.vi ‏37 KB

    First, get rid of all the timed structures. I don't know what you think they do but at best, all they will actually do is report that they are running late. If a GPIB Write takes x number of msec, then that is how long it will take. The timed structures are just adding overhead. Use the error in/error connections to enforce dataflow and use the VISA functions instead of the low level GPIB. Make sure to add error in/error out connections to your subVIs. Move the file write out of the loop and use a producer/consumer architecture.
    Finally, as I hinted, the GPIB communication speed is dependent on how many bytes you read and write. The instrument itself may not be capable of high speed communication. GPIB itself is not really designed for high speed communication.
    I'll also mention that changing the timeout points to a fault in your code. You really aren't tracking errors, but if you did and got timeout errors, then you need to fix that. You are perhaps not sending a correct command, the instrument is not sending the correct termination, whatever.

  • How to do run time to my program?

    Hi guys.
    I have finisihed to programmimg my program, so i want do run time to my program to be indepentent program of labview.
    please give me all steps from A to Z and with details.
    Best regards.

    Here are the instructions to build a standalone program.
    The target system also needs to have the correct LabVIEW runtime engine installed. It can be installed seperately or included with the installer that you create for the executable.
    (Note that you need LabVIEW professional or add the application builder. For example LabVIEW base, full, or the student version does not have this functionality.)
    LabVIEW Champion . Do more with less code and in less time .

  • Too many abap dumps in production system

    gurus ,
      i have a doubt .   there was around 56 abap dumps by a single user .
      i just want to know whether having these much of abap dumps in the production will hit performance system in a way or other ?
    if so i can make alert them on the criticality of running a report in production .

    "the problem is , most of the dumps are SYNTAX_ERROR which are generated by the customized reports created by the users"
    Good!  I much prefer them to the "there is something wrong with your system" type dumps.
    "these people make a direct attempt in production directly resulting in lot of dumps .
    we have a quality client with the latest production datas , but they dont do their first .
    i am not sure whether this practice will really hit any performance issue .
    if so then i can insist them the importance of being alert before making an attempt in production"
    Bad, bad, bad practise. 
    As you have mentioned a QA system, I'm assuming that you have at least a 3 tier landscape ... tell the developers  to use it!
    p.s - the problem isn't so much that the users are running the reports directly in Prod, it's that the reports haven't been tested properly before they reach the Prod system !

  • How to lock running of abap program?

    Hi Friends,
    I want to lock my abap program. So, I want to provide that my program can be once at any time. And I need to unlock my program. Is there any functions that do my requests?

    HI Nail.
    YOu can set a flag in a ztable with date and time stamp.
    In the at selection-screen event, do this.
    at selection-screen.
    select single * from ztab where repid = sy-repid.
    if ztab-run_date = sy-datum.
    if sy-ucomm = 'ONLI'.
    message a000(zz) 'YOu cannot run this program'.
    endif.
    endif.
    end-of-selection.
    ztab-repid = sy-repid.
    ztab-run_date = sy-datum.
    modify ztab from ztab.
    Regards,
    ravi

  • DTP run Time Error : Dump: Internal session terminated with a runtime error

    Hi Experts,
    I'm facing a problem during loading data from PSA to DSO from DTP. It gives Dump: "Internal session terminated with a runtime error".
    When i went to PSA and see the no. of data packages, it is 1532.
    Could anybody please help me how to load the data.
    Thanks
    Ajay

    Thanks Srini!!
    the load is running for 15 min and then it is throwing dump without a single package extract.
    Ok...the same I'm also thinking to selective upload but can you please explain me how do i do that as it has only request in PSA.
    and it is a pricing data.
    Thanks
    Ajay

  • How to download a WebDynpro ABAP Application?

    Hi,
    I have created a Webdynpro ABAP application from SE80.
    now I want to move this same application to another SAP system.
    Is it possible via downloading to flat file and uploading from flat file to destination system or something like that?
    can anyone suggest some solution to this please?
    Helpful answers will be rewarded with points.
    Regards,
    Tejas

    Hi Tejas.
    Check <a href="https://forums.sdn.sap.com/click.jspa?searchID=2403670&messageID=2905500">this thread</a> out.
    Cheers,
    Sascha

  • How to check running time of program in real time?

    Hello Experts,
    I am currently creating a report wherein I need to check how long the program is running.
    For example, If it currently runs in almost 10 minutes, I need to terminate the report or create
    a message informing the user to please limit the selection of records.
    Are there any FMs to do this? Thank you guys and take care!

    Get runtime in two phases:
    DATA: t1 type i, t2 type i, delta type i.
    GET RUNTIME FIELD t1.
    ..... evaluation .....
    GET RUNTIME FIELD t2.
    delta = t2 - t1.  "Microseconds!
    .... check the delta and send message if necessary!
    Hope this helps, R.

  • How to view run-time errors

    Re the example in my last post June 21.
    I have moved the code into a class so that I can use the
    returned data
    instead of just displaying it in a grid and I now get an
    error at
    compile time 'File contains error', though when I click
    continue
    everything works exactly as I expect.
    How can I get to see what these errors are?
    Doug

    Oh sorry, yes you're right. I just assumed if no line is
    marked with the
    red error mark there would be no error. But this error is not
    related to
    any single line.
    The error shows that I don't really understand oop. Are there
    any good
    lessons or books teaching this?
    Would it help to learn Java, or would this just be confusing
    since AS3
    seems to have quite a number of differences?
    I've read through the Programming ActionScript 3 section in
    the help
    files, but it doesn't give sufficient explanation to
    understand how to
    adapt what they show to different situations.
    What would really help would be examples of use with each of
    the flash
    and mx methods as there are with AS2.
    Doug
    ntsiii wrote:
    > Do they not show up in the "Problems" tab?
    >
    > Tracy

  • How do you run an ABAP in a process chain?

    I am having problems with this and I've read documents, but I can't figure out what I'm doing wrong. HELP!!!!!
    Chain Information:
    Variant = ZPUSH_FILE_FROM_CHAIN1
    Call mode = Synchronous
    Called From =  Local
    Program = ZPUSH_FILE_FROM_CHAIN
    Program Variant = TEST_CO_FTP
    Program Information:
    Name = ZPUSH_FILE_FROM_CHAIN
    Variant = TEST_CO_FTP

    Yeah I can run it manually and it's fine. I can even run it in the background fine. This is the only error message I can find:
    Job started                                                                   
    Step 001 started (program RSPROCESS, variant &0000000012059, user ID ALEREMOTE)
                                                                                    Job cancelled after system exception ERROR_MESSAGE

Maybe you are looking for