How to duplicate OIM process

Hello
I have a requirement to provision target source administrators twice, once the same user id as their OIM account and the other with a prefix in the user id. I thought I should duplicate the resource, process, and form so that it will be clearer for the end user and or reporting,....
Is this the best method to implement this requirement?
If it is, do I have to export these components, modify their names in the exported XML file then reimport them or there is a better way?
Thanks

Best way : Clone of Resource
Good for Audit
Good for Reporting
Good for Attestation
If it is, do I have to export these components, modify their names in the exported XML file then reimport themYes you are correct here. It won't take much time if you have knowledge of existing RO.

Similar Messages

How to stop the duplicate idoc processing ? whar need to done SAP R/3

Hi All
If the Same Idoc is processed to SAP R/3 then what to do for not processing
the duplicate IDOC ?
Or some thing like this...
If by mistake same idoc processed then how to avoid to process the idoc?
what i need to in SAP R/3 side?
Regards
Kiran lvs

Hi
some thing like this:Using T.code: we19 ...Idoc processed a day ago
                                       today by using the same t.code we19 ..processed the
                                       same idoc, what i sent a day ago.
                                       Here how to stop this duplicate processing ?
I hope this is clear...else pl put a note
regards
Kiran lvs

Sender File adapter and duplicate file processing

If I set the sender file adapter to delete or archive and when a file gets picked up and processed, this file will not get deleted/archived unless it was successfully processed. However, if it errors out during processing, the file remains but it's message will get persisted in the integration engine or adapter engine. Since there's automatic retry, we have the potential for duplicate processing as in addition to the retry, the file is still continously polling for this file. In other words, how do we stop this duplicate file processing?
Thanks.

Hi Bevan,
However, if it errors out during processing, the file remains but it's message will get persisted in the integration engine or adapter engine.
your file wont get deleted unless adapter engine sucesfull pickups. if does not picked up at adapter engine then is not stored in adapter engine . if it reached Intergation Server and failed their then file would be deleted.
please let me know if you haveany questions
please reward points
Regards
Sreeram.G.Reddy

How to trigger a process task on IT Resource process form

Hi,
I want to know how to trigger a process task on IT resource process form using OIM API.For Example:- If a task ilike an e-mail is to be sent on the departure date of a user.So,how can it be done using API?
Thanks.

This would typically be done through a scheduled task. Write your code to query for the departure date. If someone meets your criteria for an action to occur, you can either use the addProcessTaskInstance which has an adapter attached to it to send the email, or in your code, send the email.
The details that need to be considered though is where the departure date is stored. Is it on a process form, or is it on the user's OIM profile. Do you want to disable the user or revoke the object instance at this departure date? You could use the notification tab of these existing tasks if so.
-Kevin

How to duplicate return of RFC.Exception Application error to test fix

I am calling a RFC using a sync step in an BPM process. I am checking for system error and have an exception branch. However we got the below error (probably due to the ECC system not being available at that precise moment or something) which was not trapped by the exception alert handling because this comes in as an Application error and not a System error. My questions are :
1) How to handle this return of .Exception message so that the BPM raises the alert in the exception branch? I have read in other threads that we need to assign the below message structure as the Fault Message and set this under the Exceptions property of the Synchronous send step. If this is true, I am mostly interested in the below question so I can test this.
2) How to duplicate this issue? I am not sure when exactly the .Exception message is returned on a RFC call, this is not configured anywhere on the ABAP side.
<rfc:ZRFC_GET_DATA.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
        <Name>RFC_ERROR_COMMUNICATION</Name>
        <Text>CPIC-CALL: CMRCV on convId: 01667803
               LOCATION    CPIC (TCP/IP) on local host with Unicode
               ERROR       connection to partner broken
               TIME        Mon Mar 16 11:21:51 2009
               RELEASE     640
               COMPONENT   NI (network interface)
               VERSION     37
               RC          -6
               MODULE      niuxi_mt.c
               LINE        905
               DETAIL      NiPRead (xx.xx.xx.xx/yyyy, hdl 64)
               SYSTEM CALL recv
               COUNTER     2
        </Text>
        <Message>
               <ID>RFC_ERROR_COMMUNICATION</ID>
               <Number>null</Number>
        </Message>
</rfc:ZRFC_GET_DATA.Exception>

Is the error resolved means that the RFC is working fine?
I think this error due to the RFC destination set to Non-unicode which is expecting unicode option
Check the R/3 machine whether it is unicode or not try to set the RFC destination option of unicode in other way and check the error getting replicated or not
Rajesh

How to get the process instance key so as to retry a rejected task through api while ad provisoing?

Hi All,
How to get the process instance key so as to retry a rejected task through API while AD provisioing state?
API URL - http://docs.oracle.com/cd/E27559_01/apirefs.1112/e28159/toc.htm
Thanks

To retry a task that is in a rejected state, you use the SCH_KEY which is the task key. In OIM, all rejected tasks are listed in the OTI table. It contains all the important information about a rejected or pending task.
You can use the APIs found in the tcProvisioningOperationsIntf class to retrieve open tasks.
-Kevin

How to do parallel processing with dynamic internal table

Hi All,
I need to implement parallel processing that involves dynamically created internal tables. I tried doing so using RFC function modules (using starting new task and other such methods) but didn't get success this requires RFC enabled function modules and at the same time RFC enabled function modules do not allow generic data type (STANDARD TABLE) which is needed for passing dynamic internal tables. My exact requirement is as follows:
1. I've large chunk of data in two internal tables, one of them is formed dynamically and hence it's structure is not known at the time of coding.
2. This data has to be processed together to generate another internal table, whose structure is pre-defined. But this data processing is taking very long time as the number of records are close to a million.
3. I need to divide the dynamic internal table into (say) 1000 records each and pass to a function module and submit it to run in another task. Many such tasks will be executed in parallel.
4. The function module running in parallel can insert the processed data into a database table and the main program can access it from there.
Unfortunately, due to the limitation of not allowing generic data types in RFC, I'm unable to do this. Does anyone has any idea how to implement parallel processing using dynamic internal tables in these type of conditions.
Any help will be highly appreciated.
Thanks and regards,
Ashin

try the below code...
DATA: w_subrc TYPE sy-subrc.
DATA: w_infty(5) TYPE c.
data: w_string type string.
FIELD-SYMBOLS: <f1> TYPE table.
FIELD-SYMBOLS: <f1_wa> TYPE ANY.
DATA: ref_tab TYPE REF TO data.
CONCATENATE 'P' infty INTO w_infty.
CREATE DATA ref_tab TYPE STANDARD TABLE OF (w_infty).
ASSIGN ref_tab->* TO <f1>.
* Create dynamic work area
CREATE DATA ref_tab TYPE (w_infty).
ASSIGN ref_tab->* TO <f1_wa>.
IF begda IS INITIAL.
    begda = '18000101'.
ENDIF.
IF endda IS INITIAL.
    endda = '99991231'.
ENDIF.
CALL FUNCTION 'HR_READ_INFOTYPE'
    EXPORTING
      pernr           = pernr
      infty           = infty
      begda           = '18000101'
      endda           = '99991231'
    IMPORTING
      subrc           = w_subrc
    TABLES
      infty_tab       = <f1>
    EXCEPTIONS
      infty_not_found = 1
      OTHERS          = 2.
IF sy-subrc <> 0.
    subrc = w_subrc.
ELSE.
ENDIF.

How to call BPEL process in JSP page

Hi
I am new to BPEL.please help me how to call BPEL process in JSP page.
Thank You...

Check this thread ....
How can i call asyncronous BPEL process from Java Class????
Tom..

I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 on the page Am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

I have Pages 09 and I have created a business card using the template but can't figure out how to duplicate it to the other 9 spaces on the page. I am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

I do the following: Hold down the command key and highlight all the items to be reproduced. Then hold down option and drag the items from the first to each subsequent card.

How to configure quality process with batch management.

Dear Friends,
we have a scenario,our client receive goods with 101movement type into quality inspection stock.
once stock is passed quality check stock,then we will take into unrestricted stock with 321 movement type.
failed in quality test will be rejected.please give me suggestion how to map the scenario.while i am testing
the process in my sandbox,its asking batch number.its not allowing me to post unrestricted stock with 321
movement type.how to make batch as optional in this scenario?if batch is mainted for the material,how to
configure the process.we are not using QM module.
please suggest me.
Regards,
Varun

In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
if batch creation is set to manual, enter a manual batch no & proceed.
But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
Hope this helps.
Regards
Mithun

How does the GR processing time affect the scheduling of the process order & the latest start date in the operation.

Hi
Can anyone explain how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.

Hi
GR processing time means number of workdays required after receiving the material in storage.
Check this link:GR Processing time
Regards,
Anupam Sharma

How much ram and processing power in my imac will meet my graphic design needs?

Hi,
I'm in the market for a new imac. I'm trying to figure out how much ram I'll need and which processor will be sufficient for my graphic design needs.
I'm gonna need it to be robust enough to have InDesign, Photoshop, and Illustrator open at once along with spotify, safari with many tabs open, and a couple other apps including evernote and game from time to time. Also, I'm gonna be managing a good deal of fonts in font explorer. How much ram and processing power will I need in my imac to keep everything snappy with all these apps going at the same time?
Any advice on this would be much appreciated. Feel free to include any other relevant information you think I should know.
Thanks, Nick

Computers are out of date when you open the box
Ok, getting serious, that iMac should be a viable workhorse for what you want for a good five years, and taht depends on how much ram you put in it, add really fast external storage, and so on.
Didn't throw this in earlier so as to not influence the discussion: my daughter is the senior art director, VP, at a graphics design firm in NYC. Has been in the business for a number of years. When she changed out her Mac at work, bought, or company bought, the 27" iMac model just before the latest, with maxed out CPU/GPU, and storage. They maxed the memory to 32 GB for her, then added a 30" Apple cinema display so she has almost 5' of display in front of her. There is nothing she cannot have open all spread across that display area. She works almost exclusively in print media, occassionally condescends to do web stuff. And has a massive array of RAID drives hanging on it. But that is a setup an individual would be hard pressed to go with.
At home she uses a MacBook Pro with top cpu and display but that is all.
The point, just how massive do you want to go depends on how fast you have to work; in the office where time is money you need tons of horsepower. At home, you scale it to your abilitty to juggle other tasks at the same time.
I think your choices have been great, the discussion has focused on what is important and especially what can and cannot be changed in the future.
Best of luck setting this up.

I am using FCPX 10.1.3. and want to duplicate my project, and its complete resources, to a different hard drive. When I click "duplicate", it automatically duplicates the project in its current hard drive. How do duplicate to a different hard drive

I am using FCPX 10.1.3. with Yosemite, and want to duplicate my project and its complete resources to a different hard drive. When I click "duplicate", it automatically duplicates the project in its current hard drive, unlike the previous FCPX that gave you options. How do duplicate to a different hard drive?

Since projects are now stored in events and events are stored in libraries, you need to create a new l;bray on that different drive or open an existing library on that drive. Then duplicate your project and move it to the new library. It will copy the media. Then use the Consolidate Project File command to round up any external assets; there may or may not be any.
Russ

HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING IN THE PRODUCTION?

HI ALL,
CAN ANYONE TELL ME HOW TO STOP THE PROCESS CHAIN WHICH IS RUNNING DAILY AT 5.00 PM. I NEED TO STOP THE PROCESS CHAIN FOR COUPLE OF DAYS AND THEN RESTART IT AGAIN.
cAN ANYONE TELL ME THE PROCEDURE TO STOP THE ENTIRE PROCESS CHAIN RUNNING IN THE PRODUCTION.
THANKS
HARITHA

Hi,
First and foremost let me advice you to be very careful while doing this.
For Rescheduling
RSPC> chain > Goto > Planning view and
click on Execution tab > select > Remove from Schedule and then in Maintain variant of start process reschedule for the day you require it to run.
For terminating active chain
You can start from SM37, find the process WID/PID then go to SM50 or SM51 and kill it. Once its done come back to RSMO and check the request, it should be red but again manually force to red and save by clicking on the total status button in the status tab. This shuld ensure that the process is killed properly.
The next step will be to go to targets that you were loading and remove the red requests from those targets.
Note: For source system loads you may have to check if the request is running in the source system and kill if needed and pull it again.
But for BW datamart delta loads u may have reset the datamarts in case u are going to pull the delta again.
Re: Kill a Job
Re: Killing a process chain.
Regards,
JituK

How to stop the process chain showing status as yellow but no process step

Dear Friends,
How to stop the process chain showing status as yellow but no process step is running in that process chain.
We have manually triggered the process chain for sales it finished successfully till load data but the next step is create index and DB statistics. Both of this steps are in unscheduled position only and no background job for this.
Please guide me.
Thanking you in advance.
Regards,
Shubhangi

Hi,
At times even I have faced this situation. During those times, running the Function module RSPC_PROCESS_FINISH by passing the right parameters came to my rescue.
Regards,
Raj

How to duplicate OIM process

Similar Messages

Maybe you are looking for