How to Edit Query Result of Simple Search Panel

Hi expert,
My requirement is I need to override the query result from Simple Search Panel.
The data that I provided above was just for simplify the example.
One of my requirement is:
- when the "status" column value is 0, I need to override this and show an image of image0.jpg
- when the "status" column value is 1, I need to override this and show an image of image1.jpg
Any pointers about this will be so much appreciated.
Thanks,
Rheza
Edited by: 893922 on Mar 6, 2013 7:26 PM

Similar Messages

How to save query result in excel file

Hi all,
How to save query result in excel file from sql*plus tool.
thank you

Do you really need an Excel file (binary) or a simple CSV?
If you just need a CSV then search for DUMP_CSV at http://asktom.oracle.com or at this forum
If you need formatting and/or multiple worksheets then you can use free tools like
https://xml-spreadsheet.samplecode.oracle.com/ or https://exceldocumenttype.samplecode.oracle.com/
Regards
Marcus

How to get query result in comma dilimited text or excel file?

Does anybody know how to get query results in comma delimited
text file or excel file, I tried spool abc.txt, but the result
showed some ------ lines
Thanks

Try doing this in your sql scripts
set heading off
set pagesize 0
set linesize 4000
set feedback off
set verify off
set trimespace on
set colsep ","
spool output.txt
select * from dual (or whatever you are querying
spool off
There may be a couple other set statement that you could add but
this should get you started in the right direction

How to display query result in seperated page.

How to display query result in seperated page, if the results are very big (more than 5000 records) and there are so many concurrent users (about 500 - 1000 users).
Are there any solutions or frameworks?
Plese help me .........
thanks,
--bhasin

Hi,
How to display query result in seperated page?I think RowSet will be the better technology to use in this
situation.For more information on this please visit http://developer.java.sun.com/developer/Books/JDBCTutorial/chapter5.html
which explains in detail about RowSets.
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support/

Edit query results in SQL worksheet

I can't edit query results in SQL worksheet, I not found any options to "ON" this. I use SQL Developer 2.1.1.64.

You can't edit results in the worksheet. It's an accepted feature request with no scheduled date. In the mean time you have to go to the table or write an update statement.

How to return query result in procedure

Hi all,
Can anyone tell me how to return query result in pl/slq procedure using out .
thank you
regards
P Prakash

Procedure for sys_refcursor:
create or replace procedure ptest(c out sys_refcursor) is
begin
open c for select * from dual;
end;Procedure for collections(although sys.ODCIVarchar2List is varray, same example you can use with "table of")
create or replace procedure ptest2(c out sys.odcivarchar2list) is
begin
select dummy
bulk collect into c
from dual;
end;Example:
declare
c sys_refcursor;
v varchar2(100);
vt sys.odcivarchar2list;
begin
ptest(c);
fetch c into v;
dbms_output.put_line('1.Cursor data: '||v);
ptest2(vt);
dbms_output.put_line('2.Collection data: '||vt(1));
end;Regards,
Sayan M.

How to output query results directly to a file

Hello,
I'm new to this and i need to know how to output the results of a query directly to a file instead of it displaying on the screen and then outputting to a file in SQL Developer Version 2.1.0.63.
Thanks in advance for any help!
Edited by: user13036938 on Jun 16, 2010 7:24 AM
Edited by: user13036938 on Jun 16, 2010 7:25 AM

for a really basic spool:
SPOOL [FILEPATH];
SELECT [SOMETHING] FROM [SOMETABLE] WHERE [SOMECONDITION];
SPOOL OFF;see also:
http://www.oracle.com/technology/products/database/sql_developer/files/sql_worksheet_commands.html
for a list of other useful SQLPlus commands supported by SQL Developer
Edited by: Irian on 16-giu-2010 17.08

How to export query results

How can I export query results from sqlplus on the command line? Are there ways to specify the format such as CSV, TAB, XML, etc?
I've seen one approach that involves creating a shell script and piping the output to a file:
#!/bin/sh
sqlplus user/password <<__EOF__
set heading off;
set newpage none;
select f1, ',', f2, ',', f3 from some_table;
__EOF__
Then pipe the output to a file. Is there a simpler solution to this?

http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:235814350980

How to pass query result to HTML table?

Hi,
i want to get the query result in HTMl table instead of Display Grid. how to do it? i searched in help, it suggests use icommand to do this. but i dont know how to pass the select query result to HTML table.. please help me.
-senthil

Hi Senthil,
You can create an icommand query. You can then use the icommand retrieval methods to capture and manipulate the query data.
(http://help.sap.com/saphelp_xmii115/helpdata/en/Applet_Reference_Details/iCom
mand_Reference.htm)
Basically what we did was, use the getColumnCount() and getRowCount() methods, once you have these two numbers you can set two for loops and use String getValue(int ColID, int RowID) , within the for loops you can generate the inner html content and write the values either in a html table or html form (which is what we did). This seems to work well, I'm still playing around with it and may post this approach on sdn by end of this week.
Mahwish

How to get Query Results based on Analysis Authorization Ranges????

Hi Experts,
I have gone through the lot of SDN Links, however not able to find the answer to my question.
I have an Authorization Issue, NO Authorization
Error : EYE 007 ( Insufficient Authorizations )
Here is the issue:
Need to see the complete query result when I gave the range in Analysis Authorization for Controlling Area 001-005. Controlling Area is auth relevant and right now a variable is inserted in the query for it. If I select Controlling Area 001, the result for Controlling Area 001 is displayed in query. If 002 then also displayed. If I do not enter anything, then I get the Eye 007 error message.
I am not sure how do I display/authorize the entire result in the query for all the Controlling Areas, I have authorized user to see??
Its really urgent, please help..!
Here are the logs:
Authorization Check Log
Date and Execution Time (Local Server)
Execution Date: 06.09.2007
Execution Time: 14:48:41
Executed Query: 0CCA_C11/GBCCA_MP01_Q0002_AP
Executed by User ZBI_TEST_001
Executed with Analysis Authorizations of Another User ZBI_TEST_001
InfoProvider Check
Building the Buffer...
...Buffer Built
Are there authorizations for accessing InfoProvider 0CCA_C11 with activity 03?
Authorization exists for general access to InfoProvider 0CCA_C11 with activity 03
InfoProvider Check
Authorization exists for general access to InfoProvider 0CCA_C11 with activity 03
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider 0CCA_C11:
0CO_AREA
0TCAACTVT
Relevant Characteristics for Detailed Authorization Check
(Characteristics with Full Authorization Are Not Listed!)
List of Effective Authorization-Relevant Characteristics for InfoProvider :
List Is Empty:
There Are No Characteristics That Have to Be Checked in Detail
Authorization Check
Detail Check for InfoProvider 0CCA_C11
Preprocessing:
Selection Checked for Consistency, Preprocessed and Supplemented As Needed
Subselection (Technical SUBNR) 1
Check Node Definitions and Value Authorizations...
Node- and Value Authorizations Are OK
End of Preprocessing
Filling the Buffer...
...Buffer Filled
Main Check:
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
CO_AREA = '0003'
AND TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Authorized
Subselection (SUBNR) Is Authorized
Authorization Check Complete
Authorization Check
Detail Check for InfoProvider 0CCA_C11
Preprocessing:
Selection Checked for Consistency, Preprocessed and Supplemented As Needed
Subselection (Technical SUBNR) 1
Check Node Definitions and Value Authorizations...
Node- and Value Authorizations Are OK
End of Preprocessing
Filling the Buffer...
...Buffer Filled
Main Check:
Subselection (Technical SUBNR) 1
Supplementation of Selection for Aggregated Characteristics
No Check for Aggregation Authorization Required
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Partially or Fully Authorized (Intersection) Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
( CO_AREA < '0001'
OR CO_AREA > '0005' )
AND TCAACTVT = '03'
Value selection partially authorized. Check of remainder at end
Following Set Is Checked Comparison with Following Authorized Set Result Remaining Set
Characteristic Contents
0CO_AREA
0TCAACTVT
SQL Format:
( CO_AREA < '0001'
OR CO_AREA > '0005' )
AND TCAACTVT = '03'
Characteristic Contents
0CO_AREA I BT 0001 0005
0TCAACTVT I EQ 03
I EQ 16
Not Authorized
All Authorizations Tested
Message EYE007: You do not have sufficient authorization
No Sufficient Authorization for This Subselection (SUBNR)
Following CHANMIDs Are Affected:
184 ( 0CO_AREA )
Authorization Check Complete

Hi,
 Have you defined the vaule for 0CO_AREA as BT 001-005 in you Authorization for 0CO_AREA.Also how have you defined your Authorization Variable on the query? Have you define as select options or interval? I thing you need to define it as interval or select options.
Hope it helps,
Cheers,
Balaji

How to save query result on the file server as excel file?

Hi everyone,
I need to save the the query result on the file server as excel file.
Do you have any idees how can I do it?
Regards
Erwin

i dont think you can save as excel file but you can save it as CSV use APD or RSCRM BAPI for this

How to display query result like this

I got a query...gives list of names.
i want to display
11. Peter
12. Jessica
32. Leo
15. Jamie
36. Edward
how i get static number infront of my query result.
static number is not in order.

Amm85 wrote:
I got a query...gives list of names.
i want to display
11. Peter
12. Jessica
32. Leo
15. Jamie
36. Edward
how i get static number infront of my query result.
static number is not in order.
You could use the function queryAddColumn to add the numbers as a separate column to the query.
Let us suppose the name of the query is "myQuery". Then you could proceed as follows

<cfset staticList = "11,12,32,15,36,13,23,14,33,16,44,31,17,34,18">

<cfset staticNrArray = ArrayNew(1)>
<cfset staticNrArray = listToArray(staticList)>

<cfset nColumnNumber = QueryAddColumn(myQuery, "staticNr", "integer", staticNrArray)>

<cfdump var="#myQuery#">
The list I have given here has 15 numbers. This will naturally instruct ColdFusion to add a new column named staticNr, having 15 rows. You might like to know that the queryAddColumn function enables padding.
Here is how it works. Suppose that the query originally had only 8 rows before you added the column(of 15 rows). Then, in the new query, ColdFusion would pad the last 7 rows of the other columns with null values. If the original query had 20 rows instead, then Coldfusion would pad the last 5 rows corresponding to the staticNr-column with null values.

Odac 12.1 Oracle.VsDevTools Cannot edit query results

I am running Windows 7 64-bit and Visual Studio 2010
I installed ODTwithODAC121010 successfully.
In Visual Studios Help>About it shows: Oracle Developer Tools for Visual Studio 12.1.0.1.0
Issue:
After updating to odac 12.1 I can no longer edit/insert data into the query builder results pane.
I have relied on this capability in previous versions of odac.
Has this feature been removed?
I've connected to multiple Oracle 11g dbs with same results below:
I get the following response when I attempt to edit a field in the query results pane:
No row was updated.
The data in row 10 was not committed.
Error Source: .
Error Message: Unable to parse expression.
Correct the errors and retry or press ESC to cancel the change(s).
I get the following response when I paste a new row in the query results pane:
No row was updated.
The data in row 11 was not committed.
Error Source: Oracle.VsDevTools.10.0.
Error Message: Object reference not set to an instance of an object.
Correct the errors and retry or press ESC to cancel the change(s).
Is there something I need to do to enable this?
What are some good alternatives if this capability is no longer supported?

Hi George Pertea,
Thanks for the reply.
I am in the edit query mode and also the query tool bar is enabled.
But my "view sql" button is disabled,I cannot click on it.
I am logged in as "Admin" , so what is the problem.
I was able to do that in XI R2 before.
Please help me!
Thanks

How to send query results from BW to R/3 abap program

Hi,
I have to bring in query results from BW into a abap program written in R/3...can anyone help me on how to accomplish this(BW to R/3) please...i was thinking if reporting agent or broadcasting should help but i dont know how to get started.
Please help.
Thank you so much.

Hi Vijay,
As i know, you can send data from BW to Flat file or into any table in BW or to BW application server only.
You need 3rd party to send data to different server.
You can use
1. Tcode : RSCRM_BAPI to download query values/results into a table or into a flat file. OR
2. You can use Infospokes to generate files from ODS/CUBE/master data objects to flat files(local/application server) or to a table.
3. Using information broadcasting we can send mail(dont know much options), but i dont think generation of file possible.
You need to trnasfer generated file from BW to R/3 and load into R/3 using BDC or LSMW(if data is low).
I think, you can also use RFC function modules to read data from BW to R/3, plz check with ABAPer.
Hope it Helps
Srini

SSMS Addin - How To Access Query Results Grid

Hi,
I want to access Query Result Grid(Results) in SSMS addin but I did'nt found anything.
How can I access Query Result Grid, Rows, Columns and Cells when I executed a script?
Thanks.

SQL Server Management Studio currently supports query execution results to be displayed in three different ways: Results to Grid,
Results to Text and Results to File.
By default SQL Server Management Studio is configured to display query results in
Grid format. If you want to change the default to some other option follow these steps.
1. In SQL Server Management Studio, under Tools menu, click
Options as shown in the snippet below.
2. In the Options dialog box, expand Query Results, expand
SQL Server and then select General as shown in the snippet below. In the right side panel choose one of the three options shown below in the
Default Destination for results drop down list and click
OK to save the changes as shown in the snippet below. The changes will go into effect once you open a New Query window.
Query Result Options for Results to Text
In this format you have the option to display the results in a different tab as well as setting different output options.
In the Options dialog box, expand Query Results, expand
SQL Server and then select Results to Text tab as shown in the snippet below. In the right side panel first select the checkbox for
Display results in a separate tab and then select the checkbox for
Switch to results tab after the query executes and then click
OK. If you would like to also display the column name in the result set then choose the option Include column headers in the result set
as shown in the snippet below.
The options you can use in the Text format are:
Output format: - In the above snippet you could see that by default the output is displayed as columns aligned. Some of the other options that are available are Comma Delimited,
Tab Delimited, Space Delimited and Custom Delimited. If you choose the Custom Delimited option in the Output format drop down list then you need to specify a character of your choice for the delimiter in the
Custom delimiter text box.
Include column headers when copying or saving the results: - If this option is selected, then whenever the results are copied to clipboard or it is saved to a file the column headers are also copied along with the results.
Include the query in the result set: - The text of the query is displayed as part of query output under the messages tab.
Scroll as results are received: - If this option is selected, then the display focuses on the most recently returned records at the end of the results set.
Right align numeric values: - If this option is selected, then numeric values will be aligned to the right of the column.
Discard results after query executes: - If this option is selected, then the query results are not displayed in the reviewing pane.
Display results in a separate tab: - If this option is selected, then the result set after query execution will be displayed in a new tab instead of at the bottom of the query window.
Switch to results tab after the query executes: - If this option is selected, then after the query execution the screen focus will be set to the results tab.
Maximum number of characters displayed in each column: - This sets the maximum characters to display for any one column. So if you have a column that is 500 characters this will only show the first 256 if you keep the default setting.
Ref link :http://www.mssqltips.com/sqlservertip/2346/different-options-for-query-results-in-sql-server-management-studio/
Ahsan Kabir Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread. http://www.aktechforum.blogspot.com/

How to Edit Query Result of Simple Search Panel

Similar Messages

Maybe you are looking for