How to edit XML parsed data and save on iPhone app
Hi,
How to edit and XML retrieved data that is displayed on an iPhone app and save again in the same XML file using iPhone SDK.
In other words I want to change the XML file data or edit and save.
Thnx in advance.
Regards
Amit
Hello amit,
No, not at all. Surely you will parse your XML file using the NSXMLParser class. OK! i think i get it now, do you wants to change/modify the value of any tag in the XML file? For that you will be required to parse your XML file using NSXMLParser class, and fill out some data structure (according to the the XML format) do some changes into your data structure, and then write your XML to the file (according to the edited data structure) using the method i told u earlier. This is what my preferred method is, and i am pretty much sure that it is not a bad way to do this at all.
Hope this clarifies some of your queries.
Best regards,
Obaid
Similar Messages
-
How to get xml Element , data and its Childs
hi,
I am trying to get entire Element and its childs depending on condition.
suppose
if(doc.element.name== "despatch"){
// here i want entire despatch element with data and childs and copy into one string like
// eg: String dsp = <despatch><name>body1</name> <value>value1<value>
</despatch>
<?xml version="1.0">
<handler>
<name>header1</name>
<value>value1</value>
</handler>
<despatch>
<name>body1</name>
<value>value1<value>
</despatch>
<gov>
<name>env</name>
<value>value1</value>
</gov>I managed to get number of elements depending on the Element name but i need to get the entire block.
nodeList = document.getElementsByTagName("despatch").item(0).getChildNodes();
for(int i=0;i<nodeList.getLength();i++){
System.out.println("i :"+document.getElementsByTagName("m:Security").item(i));
}any kind of help is appreciated.
Han.
Edited by: HANRAM on Apr 24, 2008 2:48 AMHi Kartik,
This one is similar to my question to print and email invoice at same time. I pass itcpo-tdgetotf = 'X' in order to get otfdata and send email with the attachment of otfdata.
Now I have data in otfdata, but when I call print_otf function, I clear out itcpo-tdgetotf, and passed
itcpo-tddest = device_type but I still get error message said 'Handler not valid for open spool request'.
Can you give me a working example that you have otfdata table and print data from that table. I also post my question on other thread
submit report and export to memory
thanks -
I would Like to know where i can see the date AND time on a picture i take With My iPhone? AND if not on the phone automaticly,.. Why not?... If even the cheapest phones provide this BASIC info.
You can get this info if you have iPhoto for your phone (costs $5) - you can also try out the app I made (free) https://itunes.apple.com/us/app/photo-date/id605218393?ls=1&mt=8 Would love to know what you think!
-
How to validate XML against XSD and parse/save in one step using SAXParser?
How to validate XML against XSD and parse/save in one step using SAXParser?
I currently have an XML file and XSD. The XML file specifies the location of the XSD. In Java code I create a SAXParser with parameters indicating that it needs to validate the XML. However, SAXParser.parse does not validate the XML, but it does call my handler functions which save the elements/attributes in memory as it is read. On the other hand, XMLReader.parse does validate the XML against the XSD, but does not save the document in memory.
My code can call XMLReader.parse to validate the XML followed by SAXParser.parse to save the XML document in memory. But this sound inefficient. Besides, while a valid document is being parsed by XMLReader, it can be changed to be invalid and saved, and XMLReader.parse would be looking at the original file and would think that the file is OK, and then SAXParser.parse would parse the document without errors.
<Book xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="book.xsd" name="MyBook">
<Chapter name="First Chapter"/>
<Chapter name="Second Chapter">
<Section number="1"/>
<Section number="2"/>
</Chapter>
</Book>
<?xml version="1.0" encoding="ISO-8859-1" ?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="Book">
<xs:complexType>
<xs:sequence>
<xs:element name="Chapter" minOccurs="0" maxOccurs="unbounded">
<xs:complexType>
<xs:sequence>
<xs:element name="Section" minOccurs="0" maxOccurs="unbounded">
<xs:complexType>
<xs:attribute name="xnumber"/>
</xs:complexType>
</xs:element>
</xs:sequence>
<xs:attribute name="name"/>
</xs:complexType>
</xs:element>
</xs:sequence>
<xs:attribute name="name"/>
</xs:complexType>
</xs:element>
</xs:schema>
public class SAXXMLParserTest
public static void main(String[] args)
try
SAXParserFactory factory = SAXParserFactory.newInstance();
factory.setNamespaceAware(true);
factory.setValidating(true);
SAXParser parser = factory.newSAXParser();
parser.setProperty("http://java.sun.com/xml/jaxp/properties/schemaLanguage",
"http://www.w3.org/2001/XMLSchema");
BookHandler handler = new BookHandler();
XMLReader reader = parser.getXMLReader();
reader.setErrorHandler(handler);
parser.parse("xmltest.dat", handler); // does not throw validation error
Book book = handler.getBook();
System.out.println(book);
reader.parse("xmltest.dat"); // throws validation error because of 'xnumber' in the XSD
public class Book extends Element
private String name;
private List<Chapter> chapters = new ArrayList<Chapter>();
public Book(String name)
this.name = name;
public void addChapter(Chapter chapter)
chapters.add(chapter);
public String toString()
StringBuilder builder = new StringBuilder();
builder.append("<Book name=\"").append(name).append("\">\n");
for (Chapter chapter: chapters)
builder.append(chapter.toString());
builder.append("</Book>\n");
return builder.toString();
public static class BookHandler extends DefaultHandler
private Stack<Element> root = null;
private Book book = null;
public void startDocument()
root = new Stack<Element>();
public void startElement(String uri, String localName, String qName, Attributes attributes) throws SAXException
if (qName.equals("Book"))
String name = attributes.getValue("name");
root.push(new Book(name));
else if (qName.equals("Chapter"))
String name = attributes.getValue("name");
Chapter child = new Chapter(name);
((Book)root.peek()).addChapter(child);
root.push(child);
else if (qName.equals("Section"))
Integer number = Integer.parseInt(attributes.getValue("number"));
Section child = new Section(number);
((Chapter)root.peek()).addSection(child);
root.push(child);
public void endElement(String uri, String localName, String qName) throws SAXException
Element finished = root.pop();
if (root.size() == 0)
book = (Book) finished;
public Book getBook()
return book;
public void error(SAXParseException e)
System.out.println(e.getMessage());
public void fatalError(SAXParseException e)
error(e);
public void warning(SAXParseException e)
error(e);
public class Chapter extends Element
public static class Section extends Element
private Integer number;
public Section(Integer number)
this.number = number;
public String toString()
StringBuilder builder = new StringBuilder();
builder.append("<Section number=\"").append(number).append("\"/>\n");
return builder.toString();
private String name;
private List<Section> sections = null;
public Chapter(String name)
this.name = name;
public void addSection(Section section)
if (sections == null)
sections = new ArrayList<Section>();
sections.add(section);
public String toString()
StringBuilder builder = new StringBuilder();
builder.append("<Chapter name=\"").append(name).append("\">\n");
if (sections != null)
for (Section section: sections)
builder.append(section.toString());
builder.append("</Chapter>\n");
return builder.toString();
}Edited by: sn72 on Oct 28, 2008 1:16 PMHave you looked at the XML DB FAQ thread (second post) in this forum? It has some examples for validating XML against schemas.
-
How to edit the existing data in the XML file from java programming.
Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
<mydata>
<data1>
<key1>467</key1>
<name1>Paul</name1>
<id1>123</id1>
</data1>
<data2>
<key2>467</key2>
<name2>Paul</name2>
<id2>123</id2>
</data2>
</mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr -
I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi 37 KBHi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi 59 KB
Figure_Algorithm.doc 26 KB -
How do you edit out the date and time stamp from a photo
How do you edit out the date and time stamp from a photo
You can blur it out with retouch
The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
Regards
Léonie -
how to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 device using ftp through Ethernet
Hello
For using FTP function in LabVIEW, I recommend you to check this document: FTP Basics
Also, take a look at FTP Browser.vi, which is available at the Example Finder.
To edit a XML file, try to use VIs in XML palette. Maybe Write to XML.vi helps you.
Post your current VI if possible.
Regards
Mondoni -
How to read csv Data and save it with no format changes
Hi,
At first I am not used to Diadem.
I want to read in a csv file do some calculation with the data and save the changed data in the same csv file. A file as an example is attached (496888_edit.csv).
Therefore I wrote this lines:
Dim i
Dim Delimiter
Dim FilePath
Dim FileParameters
Delimiter = ";"
Call DataFileLoad(FilePath,"CSV","Load")
' Do some calculations
FileParameters = "<filename>"&FilePath&"</filename>"&"<delimiter>"&Delimiter&"</delimiter>"
Call DataFileSave(FileParameters,"CSV")
After running that lines the csv file is looking like the other attached file (496888_after.csv)
Because of some reasons which I could not explain Diadem is rounding the numbers. I want that both files look the same.
What can I do?
There might be another extension. Just to read in some columns, doing some calculations and after the calculation saving that columns in the file instead of the originals. (The csv files are much bigger like the two examples)
Thanks,
Jens
Attachments:
496888_edit.csv 1 KB
496888_after.csv 1 KBThe only thing that can be changed in writing float64 values using the CSV plugin is the decimal point ('.' or ',').
The format of the doubles is not rounded but the CSV writer only writes the relevant digits.
It is using up to 15 digits which is the resolution of float 64. It would also switch to scintific writing if necessary.
So there is no way to force only 6 digits and filling 0s are left out. So if you just fear that you loose precision that will not happen.
(only the typical problems of epressing a 2 system binary value in a 10 system text string)
If you are interested to have a fix float format the only solution is to write with VBS directly to a file doing formatting on your own, which is slow. -
How to edit a pfd document then save using Preview?
I received a form in pdf format. I need to fill out some blanks with text and e-mail it back to the sender. I could not figure it out using Preview. Actually I tried the Adobe acrobat reader also and had zero success. Thanks
BobDaniel Kiechle wrote:
I know Acrobat Reader 8 won't let you save a filled-in PDF form.
Then you know wrong. I do this routinely.
No, you are wrong. I just tried it 2 minutes ago. Neither Adobe Acrobat 7 nor 8.1 will allow you to save a filled-in PDF form. You cannot preview. You cannot print to PDF. All you can do is Print.
Why do you need to print the filled-in form to a PDF file? You just save it; it's already a PDF file!
Because saving is disabled in Adobe Reader. Usually, if one is using a fill-in PDF form, it is some important document such as a tax form. It is always a good idea to keep an electronic form of such documents. The free Adobe Reader will not allow you to do this.
As I stated above, you can fill in and print with Preview, +but you cannot save.+
No, I can save a filled-in form to PDF using Preview. It is no longer editable, but I have an electronic copy of what I entered. That is impossible using Adobe Reader.
I really did not want to respond, and from now on I will not,
Good!
but if you say that you know Adobe Reader 8 won't let you save a filled-in PDF file, then you are spreading misinformation, and this is a disservice to those people who come here for answers. I save filled in PDF forms all the time; in your opinion, am I routinely doing the impossible?
Apparently, you must own the full Adobe Acrobat package. That will allow you to do all sorts of things with a PDF.
I think getting to the bottom of what works and what doesn't in a thread titled "How to edit a pdf document then save using Preview" is hardly doing a disservice. I appreciate your giving me the inclination to try a fill-in form using Preview again. I am quite pleased to learn that PDFView and Preview (in Tiger and Leopard) will allow you to enter data into a filled-in PDF form. Somehow I missed that. Often, it is a good idea to go back and re-try something even if you are sure you know the results. Sometimes things change underneath without your knowledge and sometime your knowledge expands to allow you to accomplish what had before been "impossible."
You can sigh all you want. But please, check your facts next time. And a bit more civility would be appreciated too. Sometimes people are wrong. That's life. The purpose of this discussion forum is not strictly to respond to questions without further elaboration. I am not here trying to make myself look smart. I am here because sometimes the questions posed are interesting and make me think. I often learn something new while trying to help someone else. That is exactly what happened in this thread. If such elaboration were not allowed, then the only people answering questions would be those who want people to think they are smart or are trying to sell some book. That would truly be a disservice. -
HT2305 how can I correct my date and time on my 3G?
How can I correct my date and time on my 3G? Thanks in advance!
Just trying to go along the free route. I found Garage Buy This doesn't work to well but lets you create an applescript and enters the auction into ical. Then you can set ical to run the script once it gets closer to the time.
Ical only lets you set a time of a minute before the date. So you have to edit the script to add a Delay 59 to have it run 1 second before. From a few refreshes of the time page it looks like ebay time is a second behind, that could be easily be due to time to load the page. anyway i'll opt for a delay of 57secs and give that a try. -
How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?
How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size? I would like them to open at the size they were previously resized like they used to in previous operating systems. They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it. Any help would be appreciated.
hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
vbeln
posnr
matnr
werks
erdat
kbmeng
vrkme
from vbap
into table it_vbap
for all entries in it_plant
where matnr = it_plant-matnr and
werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right? -
How to transfert all my data and config from 4 to 4s
Hello,
Is there a "step by step" doc. On how to transfert all my data and config
From one iphone 4 to a 4s without using outlook ( ex:for contacts ) etc...
I don't get the ITunes method, sync direction etc...
All my Iphone 4 Put into my knew Iphone 4 S within a click !
Maybe there's an app for that :-).
Thanks for the Help.iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
-
Hi,
I wanted to unlock my at&t iphone 3gs that i had for 3 years. i was told to back up the data on my phone and then restore it as new. now i don't have any data i had before it was restored. how can i get that data back onto my iphone 3gs? can i put that data on my ipad?Is it an iTunes backup or an iCloud backup? If iTunes, connect the iPhone, right click on the name of the iPhone under the DEVICES section in iTunes. Click on Restore from Backup.
If iCloud, on the iPhone go to Settings > General > Reset > Erase All Content and Settings. When the device powers back on, you will see the original setup screens you saw when your iPhone was fresh out of the box. One of these screen asks you if you want to restore. Choose Restore from iCloud backup. -
How to insert a sound recording and save it to iTunes?
How to insert a sound recording and save it to iTunes?
I have 5 voice recording on my iPhone, but the fifth was not detected on iTunes.So i can't sync
Hi,
According to my analysis, for Digital Signatures: Adobe has changed the behavior around digital signatures and SharePoint-hosted PDF files. Now, when digitally signing a SharePoint-hosted PDF file, it will be saved directly to SharePoint if that PDF file
is already checked out. If not, the user will be prompted to check it out. When digitally signing a SharePoint-hosted PDF file in Acrobat X, Version 10.0, the user would be prompted to save that file locally and would then need to upload it separately to SharePoint
as a new version.
I suggest that you use Acrobat X, then check the result. For more information about Acrobat X, please refer to
http://blogs.adobe.com/pdfitmatters/2011/06/whats-new-in-acrobat-x-version-10-1.html
In addition, you can also consider the following third-party tool:
http://www.arx.com/digital-signature/sharepoint
Thanks,
Rock Wang
Maybe you are looking for
-
HT4528 How do i set up my Iphone to print to my printer, I have an Iphone 4 with up date to IOS7
How do i set up my I phone so i can print from it . I have an Iphone 4s with update to 7.0.4
-
Hi, I am having trouble connecting to a PostgreSQL database from Crystal Reports Server. I have installed the necessary driver and I can connect to the DB from Crystal Reports 2008 and from the Business Views Manager. I think the problem is specific
-
550 5.7.1 RESOLVER.RST.AuthRequired; authentication required
Following error i get when sending mail to SharePoint mail enabled library. It create contac with non ruted domain. Domain is not public. Let say that ending of domain is LOC. So it is not registered public domain… And it is A contact, not Distr
-
Price Condition entry in Accounting doc.
Hi Gurus, Need help !! During pricing, there is one condition Z123 determined and user adds one more Z123 to get desired amount instead of changing in existing condition. Z123 = 200 Z123 = 22000 When this is posted to accounting, different behaviour
-
SAP HP Adapter don't synchronize business requirement and test requirements
Hello, I need a help. We have a customized project of HPQC here and we need to replicate the business blueprint from Solman to HPQC requeriments module. We perform the step-by-step of the HP SAP Adapter installation guide and the connection was perfo