How to enable BPEL 2.0 in SOA 11g PS2?

How to enable BPEL 2.0 preview support in JDeveloper?
I see that by default there is still BPEL 1.1.
Thx

I would also like to know how you enable BPEL 2.0 support, or confirmation if it is not actually available as a preview in 11.1.1.3.0

Similar Messages

How to enable DVM cache policy in soa suite 11G

Hello,
Can someone describe how to enable DVM cache policy in soa suite 11G?. Also how can i configure the cache policy to load values to cache at server startup? I have very large DVM which i want to load to cache for faster access.
Thanks in advance.

Hi,
DVM cache policy is lazy load. there is no option to preload the cache with server startup currently. However this would be affecting only the first request the susequent requests are serviced from cache.
HTH..
appologies for reaching on this late.
regards,
Jitendra

How to enable users change password in obiee 11g?

Is there anyone know how to enable users change password in obiee 11g?
And I have tried the method in obiee 10g, bu it didn't work.
Any help would be appreciate.

As per I understand your requirement,
In your Dashboard create a Presentation variable which receives the value of year you select.
Now in your analysis, select the year column along with all the measures you want (Actual, plan, Forecast, and what-if, etc).
Create a filter on Year column and convert it into SQL. Put the condition as:
"Year" BETWEEN @{Presentaion_Variable} - 1 AND @{Presentation_Variable}
You will get the result for selected year and the previous year.
Hope it helps..
Regards,
A.K.

How to install BPEL on WLS and JDEV 11g/WLS

Can somebody pls point me to a paper "How to install BPEL (Designer, Server, etc.) on WLS" ?!
I downloaded 80 MB BPEL (Orabpel_10133_WebLogic.zip), unzipped it, but it does not container a "read.me"...
I like to install the BPEL part for the JDEV - is that the right one ?
Or do I need to install the whole SOA Suite (incl. BPEL Server) (570 MB) - but this seem to be based on OC4J?
The core question: which (download) components do I need to install BPEL on WLS to make it run and usable ?
TIA
Bernhard

Here is the readme you may be after
http://download.oracle.com/docs/cd/E10291_01/doc.1013/e12534/toc.htm
This is an old release. There is now 10.1.3.4, but I don't believe the stand alone BPEL is supported. You need to install the full SOA Suite. The doc for this is
http://download.oracle.com/docs/cd/E12524_01/core.1013/e13058/toc.htm
You need to install the Oracle version first then port it. This is all changing in 11g, hopefully due soon.
I recommend the latter as it provides more functionality around patching.
Also SOA Suite or BPEL is on certified against 9.2 not 10.3 so you cannot use it against JDev 11g. Your JDev version must be in sync with your SOA Suite version.
cheers
James

How to debug BPEL in Oracle 10G / Oracle 11G

Hi All,
How can we debug BPEL in Oracle 10G / Oracle 11G .
We are working on RosettaNet conversion in BPEL. We would like to debug BPEL
Appreciate your help.
Regards
Vijay

Hi
I need to debug BPEL code in same manner how we debug Java Code ( Line by Line ) .
We are working with Java CAPS and Glassfish ESB for last 5 yrs. In NetBeans we debug BPEL in the same manner how debug Plain Java CODE.
Have a look at below link
http://wiki.open-esb.java.net/Wiki.jsp?page=TestingAndDebuggingBPELProcesses
I am looking for same sort of options to debug BPEL using Jdeveloper.
Regards
Vijay

How to enable BPEL loggers at domain and system level ?

As far as I know there are two kind of BPEL loggers
- at domain and
- system level
Where EXACTLY can I enable/disable them resp. set them to e.g. DEBUG mode?
Peter

Apart from the posts mentioned above, please note that log4j-config.xml is the files that has these logging entries.
For domain level : SOA_ORACLE_HOME\bpel\domains\default\config\log4j-config.xml
For system level : SOA_ORACLE_HOME\bpel\system\config\log4j-config.xml
You set these loggers on domain level or system level depending on the information you are interested to see, so set that particular logger.

Passing HTTP Headers from BPEL to a RESTFul service in SOA 11g PS2.

Hi All,
We have the following requirement.
We need to pass the following headers to RESTFul service.
x_invensys_wss_username = "Some UserName"
x_invensys_wss_password = "Some Password".
I tried to first pass username and password properties by following below post.
Attach Http headers in BPEL Process
Specifically below steps..
Hi,
If you are talking about how to invoke a secured webservice...please follow this...
After creating the reference for your secured webservice in your composite, right click on the composite and say configure web service policies...
Add the security policy named "oracle/wss_http_token_client_policy"
And also, for the reference, create two binding properties
1. oracle.webservices.auth.username
2. oracle.webservices.auth.password
For the above two properties, provide the appropriate values.....
Please test the same after making this changes and let me know....
Thanks,
Narsing Pumandla
======================================================
Somehow i don't see the headers getting added to the call.
The service i am calling don't really need these headers.But the URL we will be calling shortly for the real application need them.
Can someone let me know whether this SOA version supports this or not.?
If yes , Then what is the best way to solve this issue.[i.e Able to send hardcoded values and also user specified values.]
Thanks,
Sid.

I am using this URL : api.geonames.org/postalCodeSearch?postalcode=90110&username=siddhardha
I see below message in audit trail.Not sure why the headers are not visible.
Am i missing something which is very fundamental.?
<messages>
<Rest_InputVariable>
<part name="Input">
<Input>
<postalcode>90110</postalcode>
<username>Siddhardha</username>
</Input>
</part>
</Rest_InputVariable>
<Rest_OutputVariable>
<part name="geonames">
<geonames>
.....results.............
</geonames>
</part>
</Rest_OutputVariable>
</messages>
Edited by: Siddhardha M on Jul 19, 2012 5:44 AM

How to manage BPEL engine API fusion middleware 11g

Hi guys,
I have read a lot trying to found a way to integrate non Weblogic applications to the BPEL engine I have read that There is a fuego.papi but I guess this is just for aqualogic Process engine and besides I have not found it!!! I have read we can enable PAPI webservices entering through the BPEL engine console at localhost:8686 but I donpt have that console active I use localhost:7001 and i had the control over all servers there however I don´t have that screens that one find at internet for activating PAPI webservices... If somebody knows a solution for my problem I would appreciate guys!!!
Cristian

Try this
querySvc.getTaskDetailsById(wfcontext,taskId)
Thanks

How to enable the filetransfer in Oracle Communicator 11g?

Hi,
I've already change the relevant values in the Program Files\Oracle\Oracle Communicator\defaults.xml as following:
     <FileTransfer>
          <Location>http://example.com:7001/filetransfer</Location>
     </FileTransfer>
     <FileTransferEnabled>1</FileTransferEnabled>
But the Communicator still can't send files, how to resolve it?
Best Regards,
Sean

Hi dprabhu,
I installed the wlcs in a All-in-One Administration Server. The host name is set to example.com and the server listen port is 7001. The original default.xml after the installation is below:
<?xml version="1.0" encoding="UTF-8"?>
<Account>
     <Version>11.1.1.10002</Version>
     <AccountName></AccountName>
     <AgentId></AgentId>
     <SipUri></SipUri>
     <FullName></FullName>
     <FirewallHeartbeat>1</FirewallHeartbeat>
     <FirewallHeartbeatInterval>40000</FirewallHeartbeatInterval>
     <UseOutboundProxy>1</UseOutboundProxy>
     <OutboundProxyAddress></OutboundProxyAddress>
     <UseRPortForNatTraversal>1</UseRPortForNatTraversal>
     <UseStun>0</UseStun>
     <StunServerAddress></StunServerAddress>
     <StunServerPort></StunServerPort>
     <Theme>Slate</Theme>
     <ServiceNote></ServiceNote>
     <DeviceQValue>1.0</DeviceQValue>
     <Notifications>
          <UseNotifications>0</UseNotifications>
          <Location></Location>
          <LastShowOnceMessageID></LastShowOnceMessageID>
     </Notifications>
     <Transport>
          <ContactTransport>TCP</ContactTransport>
          <RegisterContactTransport>TCP</RegisterContactTransport>
     </Transport>
     <UPnP>
          <Enabled>0</Enabled>
     </UPnP>
     <ConnectionType>256</ConnectionType>
     <SilenceSuppression>0</SilenceSuppression>
     <AcousticEchoCancellation>0</AcousticEchoCancellation>
     <AutomaticGainControl>1</AutomaticGainControl>
     <PCSpeakerEnabled>0</PCSpeakerEnabled>
     <AllowVolumeCheck>1</AllowVolumeCheck>
     <PreferredCaptureDevice></PreferredCaptureDevice>
     <ImageResolution>QCIF</ImageResolution>
     <VideoStandard>LSVX</VideoStandard>
     <T1>500</T1>
     <T2>4000</T2>
     <T4>5000</T4>
     <PreferredSipPort>5060</PreferredSipPort>
     <PreferredAudioRtpPort></PreferredAudioRtpPort>
     <PreferredVideoRtpPort></PreferredVideoRtpPort>
     <RegisterExpireTime>600</RegisterExpireTime>
     <PresenceSubscribeExpireTime>3600</PresenceSubscribeExpireTime>
     <WatcherInfoSubscribeExpireTime>3600</WatcherInfoSubscribeExpireTime>
     <MessageWaitingSubscribeExpireTime>3600</MessageWaitingSubscribeExpireTime>
     <PublishExpireTime>600</PublishExpireTime>
     <NetDetectionEnabled>1</NetDetectionEnabled>
     <UserIdleTimeOut>1</UserIdleTimeOut>
     <UserIdleTimeOutValue>5</UserIdleTimeOutValue>
     <ShowSmilies>1</ShowSmilies>
     <ShowMessageTimestamps>1</ShowMessageTimestamps>
     <UseHotKeys>1</UseHotKeys>
     <AutoAnswerEnabled>0</AutoAnswerEnabled>
     <SavePasswordPreference>0</SavePasswordPreference>
     <ContactListSortCriteria>status</ContactListSortCriteria>
     <DeclineResponseCode>486</DeclineResponseCode>
     <Sounds>
          <Sound>
               <Event>UserOnline</Event>
               <File>UserOnline.wav</File>
               <Mute>0</Mute>
          </Sound>
          <Sound>
               <Event>UserOffline</Event>
               <File>UserOffline.wav</File>
               <Mute>0</Mute>
          </Sound>
          <Sound>
               <Event>IncomingMessage</Event>
               <File>IncomingMessage.wav</File>
               <Mute>0</Mute>
          </Sound>
          <Sound>
               <Event>VoiceMessageAvailable</Event>
               <File>VoiceMessageWaiting.wav</File>
               <Mute>0</Mute>
          </Sound>
     </Sounds>
     <Ui>
          <MainDlgTopMost>0</MainDlgTopMost>
          <SendMessageWithEnter>1</SendMessageWithEnter>
          <HideHoldOnCallSwitchingWarning>0</HideHoldOnCallSwitchingWarning>
          <BlockBuddiesOnDelete>1</BlockBuddiesOnDelete>
          <PresenceMenu></PresenceMenu>
          <MainDlgCloseToTray>1</MainDlgCloseToTray>
          <MainDlgCloseToTrayWarning>1</MainDlgCloseToTrayWarning>
          <HideCameraNotFoundWarning>0</HideCameraNotFoundWarning>
          <ShowOfflineContacts>0</ShowOfflineContacts>
          <ShowContactsWithPhone>0</ShowContactsWithPhone>
          <Dialogs>
          </Dialogs>
     </Ui>
     <LdapServers></LdapServers>
     <Credentials></Credentials>
     <RingSignalMap></RingSignalMap>
     <SoundEffects></SoundEffects>
     <XDMSSettings>
          <UseHttps>0</UseHttps>
          <Host></Host>
          <Port></Port>
          <RootContext></RootContext>
          <PresRuleAUID></PresRuleAUID>
          <PresRuleDocName></PresRuleDocName>
          <HardStateAUID></HardStateAUID>
          <HardStateDocName></HardStateDocName>
          <ResourceListsAUID></ResourceListsAUID>
          <ResourceListsDocName></ResourceListsDocName>
     </XDMSSettings>
     <Provisioning>
          <Location></Location>
     </Provisioning>
     <FileTransfer>
          <Location></Location>
     </FileTransfer>
     <InboxService>
          <Enabled>0</Enabled>
          <Name></Name>
          <Location></Location>
     </InboxService>
     <PlugInProperties></PlugInProperties>
     <Groups></Groups>
     <PresenceEnabled>1</PresenceEnabled>
     <AddressListStoreEnabled>0</AddressListStoreEnabled>
     <FileTransferEnabled>0</FileTransferEnabled>
     <SMSEnabled>0</SMSEnabled>
     <AudioEnabled>0</AudioEnabled>
     <VideoEnabled>0</VideoEnabled>
     <UseServerResourceLists>1</UseServerResourceLists>
     <HistoryEnabled>0</HistoryEnabled>
     <HistoryExpirationDays>14</HistoryExpirationDays>
     <CallerIdMessagePopUpDuration>20</CallerIdMessagePopUpDuration>
     <StripRealmFromUserName>0</StripRealmFromUserName>
</Account>
I just changed the relevant part
<FileTransfer>
<Location>http://example.com:7001/filetransfer</Location>
</FileTransfer>
<FileTransferEnabled>1</FileTransferEnabled>
Best Regards,
Sean
Edited by: selin on 2009-9-10 下午6:45

How to enable row selection conditionally in ADF 11g Table

Hi,
i am using ADF 11g.
My use cae is:
we need to display a table component in which only those rows that have a particular value in one of its columns should be selectable, other rows should be viewable but not selectable.
That is, to say only those rows should be displayed as selectable in which the user name column is having the value same as the logged in user, suppose. And all the other rows having user name other than logged in user should be viewable , but not selectable for the user.
I know in ADF 10.1.3 it is possible to conditionally enabling selection of rows in af.table by using "selection"-facet. But with 11g there is no such table facet.
Does anyone have some idea how to do it in 11g?
Thanks

Frank,
thank for your suggestion.
so i tried to use clientLister like this:
selectMatCat = function(event) {
var matCatTable = event.getSource();
rwKeySet = event.getAddedSet();
for (rowKey in rwKeySet) {
firstRowKey = rowKey;
break;
var cellhandler = matCatTable.findComponent("matCatCode", firstRowKey);
if (cellhandler != null) {
alert (cellhandler.getValue());
event.cancel();
but the row in which cellhandler != null is still selected so that i can get its value on the sever side by using code like : "matCatTable.getSelectedRowData()".
I also noticed that the selection event will not automatically notify the server so the event.cancel() seems like not make so much sense.
Any suggestion?
Thanks.
Peng

Problem executing migrated BPEL process in Oracle SOA 11g

Hi,
I have migrated a 10g BPEL process to 11g successfully and deployed it. But while trying to invoke the BPEL, I am getting this error while invoking the bpel:
Non Recoverable System Fault :
Error committing transaction:; nested exception is: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-12899: value too large for column "DEV1_SOAINFRA"."CUBE_INSTANCE"."TITLE" (actual: 1718, maximum: 100) Error Code: 12899 Call: INSERT INTO CUBE_INSTANCE (CIKEY, PARENT_REF_ID, AG_ROOT_ID, TEST_RUN_ID, COMPOSITE_LABEL, STATE, CONVERSATION_ID, EXT_STRING1, SCOPE_USIZE, MODIFY_DATE, STAGE, AT_COUNT_ID, CREATOR, ECID, PARENT_ID, TITLE, PRIORITY, TEST_SUITE, TEST_CASE, METADATA, SCOPE_CSIZE, COMPOSITE_NAME, STATUS, ROOT_ID, DOMAIN_NAME, CMPST_ID, OUTCOME, EXT_INT1, AG_MILESTONE_PATH, COMPONENTTYPE, PROCESS_TYPE, MODIFIER, CREATION_DATE, AT_DETAIL_ID, COMPONENT_NAME, SCOPE_REVISION, EXT_STRING2, AT_EVENT_ID, COMPOSITE_REVISION, TEST_RUN_NAME, CACHE_VERSION) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) bind => [10092, null, null, null, soa_f21825b0-dcd6-47c2-8bf0-da63e26a53ea, 5, urn:uuid:b194c638-d9b3-4680-a10f-068c9a1eaa01, null, 415, 2010-06-23 12:38:26.406, null, 0, null, 0000I_ZcdIR95il_Kt9Die1C8BKX00009a, null, Instance #10092 of ProcessOrder GIFBDC IG-GetOrder Order 98347594357 Always 100shij 2009-08-03T16:16:17.390Z 321354564 processCancelBRMOrder Commit 1 2010061001 2010-05-01 VIN2010061001 Address1 CityName CountrySub 456123 US 101 true 12345 0 0 wang chen 1 1 1 1 1 1 Sales_Channel 123 PricePlan 156 2010-05-01 true 101 , 0, null, null, null, 256, ProcessOrder, Log_Fault, null, default, 10006, null, 0, null, bpel, 0, null, 2010-06-23 12:38:06.812, 0, ProcessOrder, 1, null, 0, 1.0, null, null] Query: InsertObjectQuery(com.collaxa.cube.persistence.dto.CubeInstance@1830602)
IS there any problem with the configuration of database? I am using XE for storing the metadata.
Please provide the solution for the issue.
Thanks in advance.

Yes it is having a receive activity , it receives the cXML from Ariba Adaapter. I checked the adapter it is up.
I generated the jar and deployed through BPEL console still i get the same error.
I got the below error
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.

BPEL-B2B patch for SOA 10.1.3.4

Hi all,
Can anyone tell me which patch should be applied to enable BPEL-B2B integration in SOA suite 10.1.3.4(latest)
And also can anyone tell me how to apply the patch

Hello,
You can integrate BPEL (10.1.3.x) with B2B (10.1.2.0.2 - any patch) by using the AQ adapter in BPEL. You can create a BPEL process that uses two AQ adapters (one for dequeuing the message from B2B, one for enqueing the message into B2B). If a message has been received by B2B, use the AQ adapter dequeue operation from BPEL to pull the message out and do whatever you need to do with it. When you need to submit that message back into B2B for out processing you create an AQ adapter enqueue operation in BPEL.
More detailed instructions on the integration of BPEL and B2B are located here:
http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_022_Enabling_B2B_BPEL_Interop.pdf
Thanks,
Ahmad

How to find bpel instance in 11g based on the index values using Java APIs

Hi ,
In SOA10G we had option to find the instances based on the index value using Java APIs like below.
WhereCondition criteria= new WhereCondition(SQLDefs.CX_index_1 + " = ?");
criteria.setString(1, "indexValue");
Locator mLoc = getLocator();
IInstanceHandle[] foundInstances = mLoc.listInstancesByIndex(criteria);
Please tell me how to achieve the same functionality in SOA 11G using Java APIs
Regards,
Saba

I have multiple bpel in my composite. I checked in ci_indexes table and it shows the instance number of the bpel process. But the em console is showing only the composite instance number. when I opened composite instance, I could see all the bpel process with instance number in the audit trail. How can I find the the actual composite instance number that I should search for in the em console ???

How to make bpel wsdl accessible externally

how can i make my bpel wsdl to be accessed by external system(outside our office network).
its an asynchronous bpel .I am using SOA 11G.
Thanks
Edited by: user13374451 on Sep 28, 2010 8:01 PM

yes..as long as you allow it by the network/firewall to expose it t outside your company.
the external company can just paste the wsdl of the bpel in the browser to see it, or they can use it for generating artifacts in their tool.
Or you could send them the wsdl + xsd so they can generate the artifcats already..but first make sure you setup the firewall/network correctly so the bpel server can be invoked from outside the company

How to create JMS Queue in soa 11g?do we need to create jmsuser user in db

Hi All,
We r using SOA 11.1.1.3 version do we get jmsuser user while installing itself. we r unable to see this user. Can anyone suggest how to create a JMS queue in soa 11g.
Thanks,
RR

Hi,
Oracle SOA runs over weblogic application server 10.3.3
If you want to create a JMS queue, then you have to create it on weblogic server. For creating a JMS queue, first of all create a JMS server on weblogic admin console (by default http://localhost:7001/console) (Services --> Messaging --> JMS Servers) and target it to a server/cluster as desired. Now create a JMS module (Services --> Messaging --> JMS Modules) and target it to same server/cluster.
Now create a sub-deployment in JMS Module (Services --> Messaging --> JMS Modules --> Your JMS Module --> Subdeployments tab) and select the JMS server you created initially as a target of this subdeployment.
Now create a connection factory in that JMS module and in advanced targetting select the subdeployment you created. Now create a JMS queue in the same JMS module and in subdeployment select the subdeployment you created.
If you want to access this queue from an application then JMS URL should be like -
jms://hostname:port/connFactoryJNDIName/QueueJNDIName
Regards,
Anuj

How to enable BPEL 2.0 in SOA 11g PS2?

Similar Messages

Maybe you are looking for