How to enable DHTML viewer in Java Infoview Portal

Hi,
I am using BOXi 3.1.  I have created a crystal report with cross tab, having the drilldown hyperlink enabled.  But when I export the report to Infoview I am not getting the drill down option.  When I searched the manual its mentioned that drill down will work only in DHTML viewer.  How to enable the same in Infoview to enable the drill down.
Thanks and Regards,
Subbu S

Not sure if this is what you are after but all Crystal Report viewing options (Active X, HTML, Java) are set under preferences -> Crystal Reports in InfoView.

Similar Messages

  • How to enable cascade view for sites(iStore) in 11i?

    How to enable cascade view for sites in 11i?

    Hi,
    For this issue, I'm trying to involve someone familiar with this topic to further look at it.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback
    for TechNet Subscriber Support, contact [email protected]
    Wendy Li
    TechNet Community Support

  • How to use activeX viewer with java( CR XI)

    Post Author: jws1624
    CA Forum: JAVA
    Hi
    I could find any sample source or refference about usging activeX viewer and java (CR XI R2 sp3).
    Because of downloading excel(export function), I can't choose JRC viewer . So I think activeX viewer is only way to solve my problem.
    Can anyone let me know how to coding it with jsp? ( there are saveral samples in asp code, but not jsp)

    Post Author: Ted Ueda
    CA Forum: JAVA
    The limitation of not having Excel exports is specific to the Crystal Reports Java Reporting Component, and not with the viewer.ActiveX viewer is supported with the Report Designer Component, which is not Java but COM based - the RDC furthermore is deprecated, and not supported starting with Crystal Reports 2008.  The ActiveX viewer is also supported with Crystal Reports Server and BusinessObjects Enterprise.If you use CR.NET, then Excel export is supported - however, as its name implies, it uses a .NET-based SDK.Sincerely,Ted Ueda 

  • How to use acrobat viewer for java enabled platform

    i want to use any api which can generate automatically pdf files and whose control goes through the java program.
    i found that adobe is providing one zip file(acrobat viewer) for it.it contains some class files.but i dont know how to use it.
    can anybody help me?
    or if u can suggest any free api for this purpose?
    its urgent.i'll be thankful 2 u.

    http://forum.java.sun.com/thread.jspa?forumID=31&threadID=792789

  • How to enable database access from Java or CSharp ?

    I set up an Oracle Express database on my local computer.
    Now I want to connect to this databsee from a CSharp (or Java) program.
    How do I have to specify the connection string?
    The following does NOT work:
    connectionstring = "Data Source=XE;User Id=karl;Password=mypassword";
    connection = new OracleConnection(connectionstring);
    connection.Open();
    I am getting an error
    "Invalid argument" ORA-12532 error
    How do I have to specify the connection string otherwise ?
    Is the sequence of the parameter Data Source, User Id and Password
    important ?
    How do I get a more detailed error message from Oracle ?
    Do I have to enable the accessibility from outside programs
    in Oracle somewhere ?

    about to the error:
    ORA-12532 TNS:invalid argument
    Cause: An internal function received an invalid parameter. This message is not normally visible to the user.
    Action: For further details, turn on tracing and re-execute the operation. If the error persists, contact Oracle Support Services.
    Regards

  • How to enable Browser View option in Performance Scorecard

    Hello Experts,
    I am working on Hyperion Performance scorecard 11.1.1.1.0.I can navigate the scorecard from the workaspace.I am not getting any documentaion which can give me the crystal idea about the steps need to follow to create scorecards,measures,....
    In some documents it mentioned that Under Browser View pane there are some templates for maps,scorecards,Employees..but i can't see the "Browser Option" on the task pane...
    Can anyone have suggetion that how can i see this option or shall i need to enable it from somewhere?????
    I am very eager to create the scorecards...If anyone have some any idea plz share it......
    Thanks in advance,

    Hi
    I am also facing the same problem. In fact I have installed and configured HPS 11.1.1.3 without any problem,but I can't see the browser option view. Can anyone help solve this problem?
    Thanking you in advance
    Edited by: user10673449 on Oct 10, 2009 7:27 AM
    Edited by: user10673449 on Oct 10, 2009 7:28 AM

  • How to enable detail view interactive report as default for public user?

    Hello all,
    I'm currently developing a search results page.
    I'm trying to do a nice view instead of a default table like view from the interactive reports. So in this case i enabled the detail view so i could make fancy designs.
    all worked well and looked neat but however when i pass value from my search page using IR_ROWFILTER and clear the results page using page_no,RIR, it brings me to the interactive reports result page with the default table like view.
    i have to press the detail view to get it. i tried saving it as default but it wont work. this issue is for public user.
    if i make the page requires authentication, and save the detail view as default i would not have any problem. i could search and it will straightly bring to the detail view of the search page.
    of course the other reason i found is because im using the IR_ROWFILTER and clearing page using page_no,RIR..without it,it works well but i need it coz im doing a a search result. i need to send search text from another page and put it in the filter in the search page. i would need to use RIR to clear it for searching again.
    is this a limitation for public user? it doesnt happened for authenticated user though..
    how can i make this view as default for public user?

    T101_cyberdyne wrote:
    how can i make this view as default for public user?
    Flip the report into Detail view on page load using an Page Load dynamic action with the following Execute JavaScript Code true action:
    gReport.data.view('DETAIL');
    I'm trying to do a nice view instead of a default table like view from the interactive reports. So in this case i enabled the detail view so i could make fancy designs.
    Do you really need this to be an IR? Other than the detail layout, do you require any of the interactive features? If not, try using a standard report with a custom report template.

  • How to enable ping service on java-stack only system

    I have installed SAP NetWeaver 7.0 - Java Trial on local host.
    How can you activate the ping service there?
    It should work under "http://localhost:50000/sap/bc/ping"
    (I know how to activate it with transaction SICF in an abap system, but I have java-stack only here, so I can't call transactions. I can only use the Visual Admin, right?, but there I could not detect a ping service so far)
    More detailed:
    I created system "SAP_WebDynpro_XSS". (this is necessary for connecting to ECC abap backend for ESS Packages) and set following parameter:
    template:"SAP system using connection string"
         category: Web Application Server
              Web AS host name: chrisSAP:50000
              Web AS path: /webdynpro/dispatcher/
              Web AS protocol: http
    But when I test the "SAP Web AS Connection" for this system, I got following error:
    7. The Web AS ping service http://chrisSAP:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
    8. An HTTP/S connection to http://chrisSAP:50000/webdynpro/dispatcher/ was not
    obtained successfully; this might be due to a closed port on the Firewall.
    I guess step 8 did not pass because step 7 failed, and not because of a closed port or firewall (I made sure everything is open.)
    The strange thing is that the connection test fails, but the connection seems to work fine!
    I mean I can see the front ESS page in the portal when logging in with an ESS-user, and there are no errors in the log. If I change the SAP_WebDynpro_XSS parameters to some other made-up values, then the front ESS page does not come up and some errors appear with "SAP_WebDynpro_XSS" inside.
    That proofs that the connection is working despite the failed connection test, right?. But what can I do that the connection test passes? It seems that somehow SAP has hardcoded the path "/sap/bc/ping" which usually exists on an abap system. But I have java-stack only, so how can I tell that the function that runs the test?
    A system connection test fails, but the connection is working fine!
    If someone could explain that to me...

    Dear Srini Nookala,
    thank you for your answer. Unfortunately I don't understand the relation of my question to your answer.
    >> check with OSS note 1019335 SAP NetWeaver AS Java 6.40 SP21
    I have Version 7.0 SP14. I read the OSS note, but there are around 100 changes listed. I read them all, but couldn't figure out one that has to do with ping and system test. So which sentence inside the note are you referring to?
    >> The problem is due to JCo parameters configuration not properly, Ask Basis team, they will do it.
    I am basis team. I configured the JCo properly as described in manual and tested them afterwards. They run successful. Also all the links that you gave refer to JCO connections about how to set them up and test them. But what have JCO connections to do with System-connection tests? As far as I know JCO-connections are not used for system connectivity tests. You can set them up independent. I understand that JCO-connections are used for getting data from backend servers. But the system "SAP_WebDynpro_XSS" is defined for determing the webdynpros on localhost (frontend, not backend).
    So please can you explain me what JCO-connections which refer to remote hosts have to do with a ping service on local host that cannot be reached? And which part would be not configured "properly"? Timeouts? user?
    To define my question more properly:
    Is it possible to make the connection test work on a java-stack only host for a system that refers to itself (localhost)? Or is it a known bug?
    Some sub-questions
    Am I using the right system template (I am using "SAP system using dedicated application server")
    I have no abap on local host (chrisSAP). Only java stack. Usually path ..sap/bc/ping refers to an abap system, right? So in my opinion I have 3 possibilities:
    - install abap-stack on local host (portal) and activate ping service.
    - somehow install a ping service that runs under the given URL in Visual Admin (how?)
    - somehow tell the connection test to skip pinging and continue test. (How?)
    Any additional advice would be highly appreciated.

  • How to enable Gant view for migrated Task Lists in SharePoint 2013

    We recently migrated several Task type Lists from an old SharePoint environment (WSS on SP 2003) to SharePoint Enterprise 2013.  I do not see the Timeline, Calendar and Gant View options available for the migrated Views of the migrated lists like
    I see for newly created Task Lists in SP2013. Is there a way to enable this feature for these migrated Task Lists?

    Hi,
    For this issue, I'm trying to involve someone familiar with this topic to further look at it.
    Thanks,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback
    for TechNet Subscriber Support, contact [email protected]
    Wendy Li
    TechNet Community Support

  • How to enable email notifications in a OracleAS Portal Approval Chain

    How can I setup my Portal (10gR2 -10.1.4) to send a notification email on events in a approval chain? I wish to send emails to approvers and to publishers, with the result of the approval chain.

    In 10.1.4, you can research how to leverage the Content Management Event Framework (CMEF) for e-mail notifications. I am not sure if it includes approval events, but check it out. You'll still need to develop the e-mail process itself, but I believe it will give you the necessary start.
    Rgds/Mark M.

  • How to enable Network load balancing for Enterprise portal

    Hello,
    We have installed EP 7.0 central instance(00) and dialog instance (01) and would like to enable network load balancing between these two EP servers.Have installed network balancer and the configuration has been done at network level.
    The below URLs are being used for accessing the portal
    Central instance :
    http://CIhostname:50000/irj/portal
    Dialog Instance:
    http://DIhostname:50100/irj/portal
    Both the port number has to be same for enabling load balancing.In order to acive this we have to map this port to http port by making some changes in Visual Administrator.
    Can you please let me know step by step  procedure or any link where i can find the same?
    Appreciate your response
    Thanks,
    Vadi

    Dear Jay,
    Thnaks for your reply.
    No...NLB will helpful in load balancing between different 2 different  application (Ep)servers.
    We are using microsoft network load balancer.Found the service http provider in VA for making those changes.
    Any way thanks.
    Regards,
    Vadi

  • How  to find the view/page name in portal

    Hi All,
    I am new in SAP. I have to customize a Compensation page in HR module.
    Could some one help me to find out these things:
    --- How can I find out the page/iview name from portal which I want to customized i.e. I am on HR module of compensation page and I want to know the name of iview/page name.
    --- How can I start development for customization.
    Any type of help will be highly appreciated.
    thanks in advance,
    -Anand

    Hi,
    The component name is FITV_POWL_TRIPS. check this help for more details: https://help.sap.com/erp2005_ehp_03/helpdata/EN/46/51dd0698075e3fe10000000a11466f/frameset.htm
    hope this helps u,
    Regards,
    Kiran

  • Opendocument, opening in a new tab when preference "In the InfoView portal"

    Hi experts!
    I have a webi document with a link I need to open in a new window (or tab).
    In the opendodument call I specify target=_blank, and ir works unless the user preference of document viewing: "In the InfoView portal" is chosen.
    Has anyone faced this before? How can I link to a new window despite this user preference?
    Thank you in advance!
    My OpenDoc call:
    ="<a style='color: #FFFFFF; text-decoration: none' href=\"../../opendoc/openDocument.jsp?iDocID=AVq8JCDql6tFjnyjsHPoP_U&sIDType=CUID&sType=tmp&sWindow=Same\" title=\"\" target=\"_blank\" nav=\"doc\">"+"HELP"+"</a>"

    use sWindow=New

  • Activating adobe services in java stack (portal)

    hi,
    any one plz help me how to activate adobe services in java stack (portal)  (or)  do we have to seperately apply a add-on for adobe services .
    thanks,
    rahul

    Hi,
    I will jot down  the points in a nutshell.
    1) Do you have the ADS server ready. Otherwise deploy ADS related SC's to your j2EE engine
    2) Connect your R/3 to the ADS server
    3) mainatain entries in the j2EE engine
    4) Other steps like ADS user creation etc. too needs to be done
    It is quite tedious;as Juan said, better to read the whole stuff before starting.
    Do let know if you face any issues in between.
    Regards,
    Hemanth

  • How to enable commenting into pdf files using java?

    Hi All,
    Is there any way available to enable comments into pdf files through java. I have a Adobe Reader 9 and also I want put some comments into pdf file, but the reader is not allowed to place a comment into pdf file before enabling the Comments into pdf. After enabling the comments in pdf file then only we can place the comments and we can the pdf file with comments.
    Is there any way available to enable comments into pdf file to view acrobat reader.
    Thanks in advance.

    The end user who uses the web application has Acrobat installed in their mahcine needs it only for the purpose of enabling comments in pdf. If this task of enabling comments in pdf is done through my application there is no need for acrobat in such user's machine which was requested as a cost cuttnig measure.
    For this purpose, i need to know about how to enable comments in pdf through java api.
    I have used itext java api for other pdf related manipulation in java. But it does not have feature as per the requirement posted above. Can any body suggest relevant java api to achieve the task requested?
    Tahnks in Advance.

Maybe you are looking for