How to select records inserted in a table in last 30 mins

I need to select the records inserted or generated in the basic scott.emp table assuming date created is a new column which inserts the time at the time of creation
select * from emp where (date_Created) between (sysdate -30/1440) and sysdate;Does the above code works or should i need to look something new
Please advise
Regards,

sri wrote:
I need to select the records inserted or generated in the basic scott.emp table assuming date created is a new column which inserts the time at the time of creation
select * from emp where (date_Created) between (sysdate -30/1440) and sysdate;Does the above code works or should i need to look something new
Please advise
Regards,It would be better to say:
select * from emp where date_created >= sysdate-30/(24*60);

Similar Messages

How to display records into a non table base block..

Hi,
Can anybody help me how to display records into a non table base block....
Find below is my coding but it only display the last record in the first line
in the block.
PROCEDURE CREATE_CARTON_QUESTION IS
CURSOR car_c IS
select /*+ rule */ question_id, question_description
from WHOP.QADB_QUESTIONS
where question_category = 'Carton'
and question_active_flag = 'Y';
v_found VARCHAR2(10);
v_status boolean;
v_error      varchar2(150);
v_count number;
car_r car_c%rowtype;
begin
begin
select count(*) into v_count
from WHOP.QADB_QUESTIONS
where question_category = 'Carton'
and question_active_flag = 'Y';
     exception
     when no_data_found then
     v_count := 0;
end;
if v_count > 0 then
for car_r in car_c loop
---populating carton questions
:la_carton.carton_question_id     := car_r.question_id;
:la_carton.carton_question_answer     := 'N';
:la_carton.carton_error_details     := null;
:la_carton.attribute2          := car_r.question_description;
end loop;
end if;
end;
Thanks in advance.
Regards,
Jun

Hi SNatapov,
Thanks for you reply but still I get this error...
FRM-40737 Illegal restricted procedure GO_BLOCK in WHEN-VALIDATE-ITEM trigger.
Please note that I call that program unit in the last field of my control block inside when-validate-item trigger the questions should be display in la_carton block which is my non-base table block.
Find below is the code....
begin
go_block('la_carton');
first_record;
for car_r in car_c loop
---populating carton questions
:la_carton.carton_question_id := car_r.question_id;
:la_carton.carton_question_answer := 'N';
:la_carton.carton_error_details := null;
:la_carton.attribute2 := car_r.question_description;
next_record;
end loop;
end;
Hoping you can help me this problem...
Thanks in advance.
Regards,
Jun

How to select records in ALV using FM

Hi guys,
How to select records in ALV using FM. Not the OO method. Thx in advance!
Kun

hI
by using REUSE_ALV_FIELDCATALOUG_MERGE. Iys fill field catalouge table as per internal table description. Then use REUSE_ALV_GRID_DISPLAY for display ALV REPORT.
**Please reward suitable points***
With Regards
Navin Khedikar

How to delete records from dynamic internal table.

Hi Experts,
Need urgent help!!!
Issue is with Dynamic internal tables.
Below is code written by me :
FORM select_query USING Lw_tabnam
                  TYPE t682i-kotabnr.
DATA : lw_line TYPE REF TO data,
          lw_line1 TYPE REF TO data.
    CREATE DATA Lw_line    TYPE (lw_TABNAM).
    ASSIGN      Lw_line->* TO   <WA_tbl>.
    CREATE DATA LW_LINE    TYPE STANDARD TABLE OF (Lw_tabnam)
                           WITH NON-UNIQUE DEFAULT KEY.
    ASSIGN      Lw_line->* TO <TBL>.
    SELECT * FROM (Lw_tabnam)
             INTO CORRESPONDING FIELDS OF TABLE <TBL>
             WHERE (t_keys).
Endform.
code is working fine.
here even the table name and where condition are dynamic,everything is fine upto this point.
Now i have to delete some record from <TBL> based on some conditons.
     for ex : ( here lc_fieldname is KUNNR)
      loop at t_kunnr.
          lw_tabix = sy-tabix.
        Read table <tbl>
                with key (lc_fieldname) = t_kunnr-kunnr ASSIGNING <wa_tbl>.
        If sy-subrc = 0.
        *Delete
        delete <tbl> from <wa_tbl>
delete <tbl> index lw_tabix.
        Endif.
     Endloop.
The above delete statement doesn't work ,even we can't use index as it gives a syntax error " something related to "index is not allowed in standard table or hash table.
Can you help me ab't how to delete records in Dynamic internal table?
Other option that i am thinking of is to create a static table of type dynamic table.
means, data itab type standard table of <tbl> .I know the syntax is wrong ,however is there any way to do this?
Thanks in advance ,
If you have any suggestion ab't this then do let me know.
bye,
Gaurav.

Hi
I wrote this code and it works fine:
DATA LW_TABNAM(10) VALUE 'LFA1'.
DATA : LW_LINES TYPE REF TO DATA,
       LW_LINE TYPE REF TO DATA.
FIELD-SYMBOLS: <TABLE> TYPE TABLE,
               <WA>    TYPE ANY.
CREATE DATA LW_LINES TYPE TABLE OF (LW_TABNAM)
WITH NON-UNIQUE DEFAULT KEY.
ASSIGN LW_LINES->* TO <TABLE>.
CREATE DATA LW_LINE TYPE (LW_TABNAM).
ASSIGN LW_LINE->* TO <WA>.
DO 10 TIMES.
APPEND INITIAL LINE TO <TABLE>.
ENDDO.
SY-TABIX = 4.
DELETE <TABLE> INDEX SY-TABIX.
WRITE SY-SUBRC.
I hope it help you
Max

How to search records in a standard table with * ?

Hi everyone,
Can anyone tell me how to search records in a standard table with * ?
That is, in screen if user type * abc * for searching the records in which the field MC_STEXT contains 'abc'. What the code should be? How to complete the code below?
SELECT SINGLE objid FROM p1000 INTO p1000-objid,
WHERE MC_STEXT = ? .
Thanks!

Hi
There are several way to do that, probably just as some guys wrote the easier way is to use LIKE in WHERE condition and the sign % instead of *:
V_STRING = '%ABC%'.
SELECT SINGLE objid FROM p1000 INTO p1000-objid,
WHERE MC_STEXT LIKE V_STRING.
U can also use a range (just like select-options):
RANGES: R_MC FOR P1000-MC_STEXT.
R_MC-LOW = 'ABC'.
R_MC(3) = 'ICP'.
APPEND R_MC.
SELECT SINGLE objid FROM p1000 INTO p1000-objid,
WHERE MC_STEXT IN R_MC.
Max

How to dynamic field insert into intenal table?

hi friends
this is my urgent requirements .... how to dynamic field insert into internal table if it possible please tell me
thanks & regards
pauldharma

Hi,
Go through this
REPORT yusmm_text1 NO STANDARD PAGE HEADING
                     LINE-SIZE 199.
T A B L E S
TABLES: MARA,
        MAKT,
        THEAD.
GLOBAL TYPE-POOLS
TYPE-POOLS : SLIS.
   GLOBAL TYPES
TYPES : BEGIN OF TP_FINAL,
       MATNR TYPE MARA-MATNR,
       BEGRU TYPE MARA-BEGRU,
       MTART TYPE MARA-MTART,
       MAKTX TYPE MAKT-MAKTX,
       SPRAS TYPE MAKT-SPRAS,
       LTXT(2000) TYPE C ,
       SRNO TYPE N ,
      END OF TP_FINAL.
TYPES : BEGIN OF TP_T002,
        SPRAS TYPE T002-SPRAS,
        LAISO TYPE T002-LAISO,
        SRNO TYPE N ,
        END OF TP_T002.
TYPES : BEGIN OF TP_MARA_MAKT,
        MATNR TYPE MARA-MATNR,
        BEGRU TYPE MARA-BEGRU,
        MTART TYPE MARA-MTART,
        SPRAS TYPE MAKT-SPRAS,
        MAKTX TYPE MAKT-MAKTX,
       END OF TP_MARA_MAKT.
Types: BEGIN OF tp_matnr,
       matnr TYPE mara-matnr,
       END OF tp_matnr.
   GLOBAL ELEMENTARY VARIABLES
DATA : gv_date TYPE sy-datum.
DATA : gv_repid TYPE sy-repid.
DATA : g_var1(10) TYPE C.
DATA : gv_index TYPE sy-tabix.
DATA: gv_strg TYPE string,
      gv_strg1(2000) TYPE C.
DATA : gv_lang TYPE sy-langu.
DATA : g_v(3) TYPE N .
DATA : gv_lines(3) TYPE N .
DATA : gv_var(3) TYPE N .
DATA : gv_var1(3) TYPE N.
DATA: gv_str TYPE STRING.
DATA: gv_str1 TYPE STRING.
DATA : gv_li TYPE I,
       gv_lit TYPE I,
       gv_lin TYPE I.
DATA: g_var11(3) TYPE N,
      gv_li1(3) TYPE N,
      g_var2(3) TYPE N.
DATA : gv_i1 TYPE I.
DATA : gv_i TYPE I.
DATA: gl_lenght TYPE I.
   GLOBAL STRUCTURES
DATA:   T_NEWTABLE TYPE REF TO DATA,
        T_NEWLINE TYPE REF TO DATA,
        T_FLDCAT1   TYPE SLIS_T_FIELDCAT_ALV,
        T_FLDCAT   TYPE LVC_T_FCAT,
        WA_IT_FLDCAT TYPE LVC_S_FCAT,
        WA_IT_FLDCAT1 TYPE SLIS_FIELDCAT_ALV,
        WA_COLNO(2) TYPE N,
        WA_FLNAME(5) TYPE C,
        L_LT TYPE SLIS_LAYOUT_ALV.
   GLOBAL INTERNAL TABLES (WITH INCLUDE STRUCTURE)
DATA : IG_MARA_MAKT TYPE STANDARD TABLE OF TP_MARA_MAKT,
       WG_MARA_MAKT TYPE TP_MARA_MAKT.
DATA : IG_T002 TYPE STANDARD TABLE OF TP_T002,
       WG_T002 TYPE TP_T002.
DATA : IG_FINAL TYPE STANDARD TABLE OF TP_FINAL,
       WG_FINAL TYPE TP_FINAL.
data : IG_MATNR TYPE STANDARD TABLE OF TP_MATNR WITH HEADER LINE,
       WG_MATNR TYPE TP_MATNR.
DATA:BEGIN OF IG_THEAD OCCURS 0.
        INCLUDE STRUCTURE THEAD .
DATA: END OF IG_THEAD.
DATA:BEGIN OF IG_TLINE OCCURS 0.
        INCLUDE STRUCTURE TLINE .
DATA:END OF IG_TLINE.
FIELD-SYMBOLS
FIELD-SYMBOLS: <T_DYNTABLE> TYPE STANDARD TABLE,"Dynamic internal
                                                        "tablename
               <FS_DYNTABLE>, "Field symbol to create work area
              <FS_FLDVAL> TYPE ANY.   " Field symbol to assign values
COMPULSORY
FIELD-SYMBOLS: <FS_DATA> TYPE REF TO DATA,
               <FS_DATA1> TYPE REF TO DATA,
               <FS_2>    TYPE STANDARD TABLE,
               <FS_22>   TYPE STANDARD TABLE,
               <FS_1>,
               <FS_11>,
               <F>,
               <FA>,
               <LWA_LINE_WA>,
               <LWA_LINE_WA1>.
------- Create Dyn Table From FC
DATA: LT_DATA        TYPE   REF TO DATA,
      LT_DATA1        TYPE   REF TO DATA,
      LWA_LINE       TYPE   REF TO DATA,
      LWA_LINE1       TYPE   REF TO DATA,
      LI_FIELD_CAT   TYPE   LVC_T_FCAT,
      LWA_FIELD_CAT TYPE   LVC_S_FCAT.
   PARAMETERS & SELECT-OPTIONS
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_SPRAS FOR MAKT-SPRAS NO INTERVALS DEFAULT 'EN'
                                                        OBLIGATORY ,
                 S_MATNR FOR MARA-MATNR,
                 S_MTART FOR MARA-MTART.
PARAMETERS: GP_SIZE TYPE I DEFAULT '200'.
SELECTION-SCREEN : END OF BLOCK B1.
   INITIALIZATION
INITIALIZATION.
gv_repid = sy-repid.
gv_date = sy-datum.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
IF GP_SIZE < 0.
   MESSAGE E002(00).
ENDIF.
IF GP_SIZE > 50000.
   MESSAGE W130(26) WITH TEXT-004.
    SET CURSOR FIELD 'gp_size'.
ENDIF.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM FIELDCAT.
PERFORM LAYOUT.
PERFORM DATA_FETCH.
PERFORM READ_DATA_TO_FINAL.
SORT ig_final BY matnr spras.
gv_lin = gv_li.
gv_li = gv_li - 2.
LOOP AT ig_final INTO wg_final.
    ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = 'Material Number'.
    ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = 'Authorization Group'.
    g_VAR11 = wg_final-srno + 2.
    gv_li1 = gv_li1 + 2.
    MOVE : g_var11 TO gv_i1.
    ASSIGN COMPONENT g_var11 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = 'MatDesc'.
    g_var2 = g_var11 + gv_lines.
    ASSIGN COMPONENT g_var2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = 'BasicData'.
    APPEND <LWA_LINE_WA1> TO <FS_22>.
    EXIT.
   ENDLOOP.
LOOP AT ig_final INTO wg_final.
    AT NEW matnr.
      gv_index = sy-tabix.
      ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
      <F> = wg_final-matnr.
      ENDAT.
    AT NEW MATNR.
    GV_INDEX = SY-TABIX.
    ASSIGN COMPONENT 1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = wg_final-matnr.
     ENDAT.
    ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA> TO <F>.
    <F> = wg_final-begru.
    ASSIGN COMPONENT 2 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = wg_final-begru.
    gv_var = wg_final-srno + 2.
    gv_li = gv_li + 2.
    MOVE : gv_var TO gv_i.
    ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA> TO <F>.
    <F> = wg_final-maktx.
    ASSIGN COMPONENT gv_var OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = wg_final-maktx.
    gv_var1 = gv_var + gv_lines .
    ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA> TO <F>.
   <F> = wg_final-ltxt.
    ASSIGN COMPONENT gv_var1 OF STRUCTURE <LWA_LINE_WA1> TO <FA>.
    <FA> = wg_final-ltxt.
    AT END OF matnr.
      APPEND <LWA_LINE_WA> TO <FS_2>.
      CLEAR <LWA_LINE_WA>.
    ENDAT.
    AT END OF matnr.
     APPEND <LWA_LINE_WA1> TO <FS_22>.
     CLEAR <LWA_LINE_WA1>.
    ENDAT.
ENDLOOP.
PERFORM display..
*&      Form data_fetch
      text
--> p1        text
<-- p2        text
FORM DATA_FETCH .
SELECT matnr
          from mara up to gp_size rows
         appending corresponding fields of table ig_matnr
         where matnr in s_matnr
         and mtart in s_mtart.
loop at ig_matnr.
SELECT MARA~MATNR
          MARA~BEGRU
          MARA~MTART
          MAKT~SPRAS
          MAKT~MAKTX FROM MARA INNER JOIN MAKT
    ON MARAMATNR = MAKTMATNR
   appending corresponding fields of TABLE ig_mara_makt UP TO GP_SIZE
ROWS
    WHERE makt~spras IN s_spras
    AND   mara~matnr IN s_matnr
    AND   mara~mtart IN s_mtart
    AND   mara~matnr EQ ig_matnr-matnr.
    endloop.
IF sy-subrc = 0.
    SORT ig_mara_makt.
ENDIF.
ENDFORM.                    " data_fetch
*&      Form read_data_to_final
      text
--> p1        text
<-- p2        text
FORM READ_DATA_TO_FINAL .
LOOP AT ig_mara_makt INTO wg_mara_makt .
    wg_final-MATNR = wg_mara_makt-MATNR.
    wg_final-BEGRU = wg_mara_makt-BEGRU.
    wg_final-MTART = wg_mara_makt-MTART.
    wg_final-SPRAS = wg_mara_makt-SPRAS.
    wg_final-MAKTX = wg_mara_makt-MAKTX.
    READ TABLE ig_t002 INTO wg_t002 WITH KEY spras = wg_final-spras.
    IF sy-subrc = 0.
      wg_final-srno = wg_t002-srno.
    ENDIF.
    CLEAR ig_thead[].
    ig_thead-TDOBJECT = 'MATERIAL'.
    ig_thead-TDNAME   = wg_final-matnr.
    ig_thead-TDID     = 'GRUN'.
    ig_thead-TDSPRAS = wg_final-spras.
    CALL FUNCTION 'TEXT_READ'
      EXPORTING
        I_HEADER   = IG_THEAD
        I_READONLY = 'X'
      IMPORTING
        E_HEADER   = IG_THEAD
      TABLES
        T_LINES    = IG_TLINE[]
      EXCEPTIONS
        NOTFOUND   = 1.
    IF sy-subrc EQ 0.
      LOOP AT ig_tline.
        gv_strg = ig_tline-tdline.
        IF gv_strg1 <> ' '.
          CONCATENATE gv_strg1 ';' gv_strg INTO gv_strg1.
        ELSE.
          gv_strg1 = gv_strg.
        ENDIF.
      ENDLOOP.
      wg_final-ltxt = gv_strg1.
      APPEND wg_final TO ig_final.
      CLEAR wg_final.
      gv_strg1 = ' '.
    ELSE.
      APPEND wg_final TO ig_final.
    ENDIF.
ENDLOOP.
ENDFORM.                    " read_data_to_final
" read_data_to_final
*&      Form layout
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
CLEAR L_LT.
L_LT-ZEBRA = 'X'.
L_LT-COLWIDTH_OPTIMIZE = 'X'.
L_LT-WINDOW_TITLEBAR = 'MATERIAL DETAILS'.
ENDFORM.                    " layout
*&      Form fieldcat
      text
--> p1        text
<-- p2        text
FORM FIELDCAT .
SELECT SPRAS
           LAISO FROM t002 INTO CORRESPONDING FIELDS OF TABLE ig_t002
      WHERE spras IN s_spras.
DESCRIBE TABLE ig_t002 LINES gv_lines.
LOOP AT ig_t002 INTO wg_t002.
    g_v = g_v + 1.
    Wg_t002-srno = g_v.
    MODIFY ig_t002 FROM wg_t002 TRANSPORTING SRNO.
ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
    CLEAR WA_IT_FLDCAT.
    MOVE SY-INDEX TO WA_COLNO.
    CONCATENATE 'MD-' wg_t002-LAISO
                      WA_COLNO
                     INTO WA_FLNAME.
    WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
    WA_IT_FLDCAT-DATATYPE = 'CHAR'.
    WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
    WA_IT_FLDCAT-INTLEN = 250.
    WA_IT_FLDCAT-TABNAME = '<FS_2>'.
    APPEND WA_IT_FLDCAT TO T_FLDCAT.
    CLEAR wg_t002.
    ENDLOOP.
LOOP AT ig_t002 INTO wg_t002.
    CLEAR WA_IT_FLDCAT.
    MOVE SY-INDEX TO WA_COLNO.
    CONCATENATE 'BD-' wg_t002-LAISO
                       WA_COLNO
                    INTO WA_FLNAME.
    WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
    WA_IT_FLDCAT-DATATYPE = 'CHAR'.
    WA_IT_FLDCAT-SELTEXT = WA_FLNAME.
    WA_IT_FLDCAT-INTLEN = 250.
    WA_IT_FLDCAT-TABNAME = '<FS_2>'.
    APPEND WA_IT_FLDCAT TO T_FLDCAT.
    CLEAR wg_t002.
    ENDLOOP.
MOVE 'MATNR' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Material No'.
WA_IT_FLDCAT-INTLEN = 18.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 1.
MOVE 'BEGRU' TO WA_FLNAME.
WA_IT_FLDCAT-FIELDNAME = WA_FLNAME.
WA_IT_FLDCAT-DATATYPE = 'CHAR'.
WA_IT_FLDCAT-SELTEXT = 'Authorization Group'.
WA_IT_FLDCAT-INTLEN = 4.
WA_IT_FLDCAT-TABNAME = '<FS_2>'.
INSERT WA_IT_FLDCAT INTO T_FLDCAT INDEX 2.
DESCRIBE TABLE T_FLDCAT LINES gv_li.
ASSIGN LT_DATA TO <FS_DATA>.
Creating the Dynamic Internal Table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG           = T_FLDCAT         " Fieldcatalogue
    IMPORTING
      EP_TABLE                  = <FS_DATA>   " Dynamic Internal Table
    EXCEPTIONS
      GENERATE_SUBPOOL_DIR_FULL = 1
      OTHERS                    = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA>->* TO <FS_1>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_1> TO <FS_2>.
Creating a Workarea
CREATE DATA LWA_LINE LIKE LINE OF <FS_2> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE->* TO <LWA_LINE_WA>.
LOOP AT T_FLDCAT INTO WA_IT_FLDCAT.
    WA_IT_FLDCAT1-FIELDNAME = WA_IT_FLDCAT-FIELDNAME.
    WA_IT_FLDCAT1-TABNAME = WA_IT_FLDCAT-TABNAME.
    WA_IT_FLDCAT1-SELTEXT_L = WA_IT_FLDCAT-SELTEXT.
   WA_IT_FLDCAT1-REF_TABNAME = 'MARC'.
    APPEND WA_IT_FLDCAT1 TO T_FLDCAT1.
    CLEAR : WA_IT_FLDCAT,WA_IT_FLDCAT1.
ENDLOOP.
ASSIGN LT_DATA1 TO <FS_DATA1>.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG           = T_FLDCAT         " Fieldcatalogue
    IMPORTING
      EP_TABLE                  = <FS_DATA1> " Dynamic Internal table
    EXCEPTIONS
      GENERATE_SUBPOOL_DIR_FULL = 1
      OTHERS                    = 2.
Assign Dyn Table To Field Sumbol
ASSIGN <FS_DATA1>->* TO <FS_11>.
Assigning the Internal Table TYPE ANY to Standard internal Table
ASSIGN <FS_11> TO <FS_22>.
Creating a Workarea
CREATE DATA LWA_LINE1 LIKE LINE OF <FS_22> .
Assigning the Content to the workares as a Pointer
ASSIGN LWA_LINE1->* TO <LWA_LINE_WA1>.
ENDFORM.                    " fieldcat
*&      Form show
      text
--> p1        text
<-- p2        text
FORM Display .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
   I_INTERFACE_CHECK                 = ' '
   I_BYPASSING_BUFFER                = ' '
   I_BUFFER_ACTIVE                   = ' '
     I_CALLBACK_PROGRAM                = GV_REPID
    I_CALLBACK_PF_STATUS_SET          = 'PF_STATUS_SET'
    I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
   I_CALLBACK_TOP_OF_PAGE            = ' '
   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
   I_CALLBACK_HTML_END_OF_LIST       = ' '
   I_STRUCTURE_NAME                  =
   I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      =
   I_GRID_SETTINGS                   =
    IS_LAYOUT                         = L_LT
     IT_FIELDCAT                       = T_FLDCAT1[]
   IT_EXCLUDING                      =
   IT_SPECIAL_GROUPS                 =
   IT_SORT                           =
   IT_FILTER                         =
   IS_SEL_HIDE                       =
   I_DEFAULT                         = 'X'
   I_SAVE                            = ' '
   IS_VARIANT                        =
   IT_EVENTS                         =
   IT_EVENT_EXIT                     =
   IS_PRINT                          =
   IS_REPREP_ID                      =
   I_SCREEN_START_COLUMN             = 0
   I_SCREEN_START_LINE               = 0
   I_SCREEN_END_COLUMN               = 0
   I_SCREEN_END_LINE                 = 0
   I_HTML_HEIGHT_TOP                 = 0
   I_HTML_HEIGHT_END                 = 0
   IT_ALV_GRAPHICS                   =
   IT_HYPERLINK                      =
   IT_ADD_FIELDCAT                   =
   IT_EXCEPT_QINFO                   =
   IR_SALV_FULLSCREEN_ADAPTER        =
IMPORTING
   E_EXIT_CAUSED_BY_CALLER           =
   ES_EXIT_CAUSED_BY_USER            =
    TABLES
      T_OUTTAB                          = <FS_2>
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " display
FORM PF_STATUS_SET USING RS_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'DISPLAY' .
ENDFORM. "PF_STATUS_SET
*& Form Name: user_command *
*& Form Desc: For Handling USER_COMMAND *
FORM USER_COMMAND USING IF_UCOMM TYPE SY-UCOMM
                     IS_SELFIELD TYPE SLIS_SELFIELD.
CASE IF_UCOMM.
    WHEN 'DOWNLOAD'.
      CALL FUNCTION 'POPUP_TO_CONFIRM'
        EXPORTING
TITLEBAR                    = ' '
DIAGNOSE_OBJECT             = ' '
          TEXT_QUESTION               = 'Data download to excel'
TEXT_BUTTON_1               = 'Ja'(001)
ICON_BUTTON_1               = ' '
TEXT_BUTTON_2               = 'Nein'(002)
ICON_BUTTON_2               = ' '
DEFAULT_BUTTON              = '1'
DISPLAY_CANCEL_BUTTON       = 'X'
USERDEFINED_F1_HELP         = ' '
START_COLUMN                = 25
START_ROW                   = 6
POPUP_TYPE                  =
IMPORTING
ANSWER                      =
TABLES
PARAMETER                   =
EXCEPTIONS
TEXT_NOT_FOUND              = 1
OTHERS                      = 2
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      CALL FUNCTION 'GUI_DOWNLOAD'
        EXPORTING
    BIN_FILESIZE                  =
          FILENAME                     = 'C:\Material-Text.xls'
         FILETYPE                      = 'ASC'
    APPEND                        = ' '
     WRITE_FIELD_SEPARATOR         = 'X'
    HEADER                        = '00'
     TRUNC_TRAILING_BLANKS         = 'X'
    WRITE_LF                      = 'X'
    COL_SELECT                    = ' '
    COL_SELECT_MASK               = ' '
     DAT_MODE                      = 'X'
   IMPORTING
     FILELENGTH                    = GL_LENGHT
        TABLES
          DATA_TAB                      = <FS_22>
EXCEPTIONS
    FILE_WRITE_ERROR              = 1
    NO_BATCH                      = 2
    GUI_REFUSE_FILETRANSFER       = 3
    INVALID_TYPE                  = 4
    NO_AUTHORITY                  = 5
    UNKNOWN_ERROR                 = 6
    HEADER_NOT_ALLOWED            = 7
    SEPARATOR_NOT_ALLOWED         = 8
    FILESIZE_NOT_ALLOWED          = 9
    HEADER_TOO_LONG               = 10
    DP_ERROR_CREATE               = 11
    DP_ERROR_SEND                 = 12
    DP_ERROR_WRITE                = 13
    UNKNOWN_DP_ERROR              = 14
    ACCESS_DENIED                 = 15
    DP_OUT_OF_MEMORY              = 16
    DISK_FULL                     = 17
    DP_TIMEOUT                    = 18
    FILE_NOT_FOUND                = 19
    DATAPROVIDER_EXCEPTION        = 20
    CONTROL_FLUSH_ERROR           = 21
    OTHERS                        = 22
      IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      IF GL_LENGHT NE 0.
        MESSAGE S398(00) WITH 'DATA downloaded to EXCEL'.
      ENDIF.
Thanks
ENDCASE.
ENDFORM.                    "user_command

How is the data inserted into CST_INV_QTY_TEMP table?

Hi All,
How is the data inserted into CST_INV_QTY_TEMP table ?
Thanks in advance,
Mayur
Edited by: 928178 on 17-Apr-2012 04:29

How is the data inserted into CST_INV_QTY_TEMP table ?TABLE: BOM.CST_INV_QTY_TEMP
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=CST_INV_QTY_TEMP&c_owner=BOM&c_type=TABLE
Thanks,
Hussein

How to select records based on Max/Min on different columns and group by

I have a table with 5 columns(a,b,c,d,e), i need to select records based on MAX(c),Max(D) and Min(e) group by a,b. i am trying using : select max(c),max(d),min(e) from table group by a,b. this is not working. its giving me 1 6 1
a b c d e
1 1 1 2 1
1 1 1 6 4
1 1 1 6 3
when i group by a,b i am expecting the record 1 6 3
Please help me with this.. Thanks in advance....

Hi,
Welcome to the forum!
962163 wrote:
I have a table with 5 columns(a,b,c,d,e), i need to select records based on MAX(c),Max(D) and Min(e) group by a,b. i am trying using : select max(c),max(d),min(e) from table group by a,b. this is not working. its giving me 1 6 1
a b c d e
1 1 1 2 1
1 1 1 6 4
1 1 1 6 3
when i group by a,b i am expecting the record 1 6 3It looks to me like "1 6 1" is the correct answer. You're asking for the lowest value of e, and 1 is lower than 3.
Maybe you don't want MIN (e). Explain why you want 3 (that is, how you decided that 3 is the correct value for the last column) and someone will help you code it.
Edited by: Frank Kulash on Sep 28, 2012 6:17 PM
Whenever you have a problem, you should psot CREATE TABLE and INSERT statements for your sample data. That way, the people who want to help you can re-create the problem and test their ideas. It often helps to clarify the problem, too. since this is your first message, I'll do it for you:
CREATE TABLE     table_x
(       a     NUMBER
,     b     NUMBER
,     c     NUMBER
,     d     NUMBER
,     e     NUMBER
INSERT INTO table_x (a, b, c, d, e) VALUES (1, 1, 1, 2, 1);
INSERT INTO table_x (a, b, c, d, e) VALUES (1, 1, 1, 6, 4);
INSERT INTO table_x (a, b, c, d, e) VALUES (1, 1, 1, 6, 3);
COMMIT;

Explain about how oracle handles Simultaneous insertions to a table

Hi,
Pls help me out ok..
How does oracle handle this senario....explained below?
When 2 users insert to a same table at the same time who gets into the table first?User 1 or user 2?
then.......
In a table where the auto number is generated user 1 adds 10 records.Doesn't commit it.So the 10 records r visible to his/her session.Another User user 2 doesnt see this change in his/her session.
User 2 wants to get the max number of records in the same table and he does a count.What will this user get as the count?
(If the table was empty before the user 1 added 10 records.)How does Oracle handle this scenario?
Kaushi

Dear Kaushi,
It's very simple,
When ever 2 or more users work on oracle database the concept of LOCKS applies
There are 2 types of locks:
a. Exclusive Lock.
b. Public Lock.
as per your question the when user one will be submitting the data on a table and the user 2 will find that database in exclusive lock. Thus he can only view(select)
the records but he can not append/insert any row in that table.
Thus there is no question of error.
Hope you got ur answer.
varun
(IBM certified software engineer)

How to select a picture in a table live view DW 2014.1

can anyone explain to me how I can select a picture inside a table element so I can apply css to it?
I've already tried applying css by class and ID unsuccessfully.
I can select every other element inside the table except the picture. Why would that be?

I have corrected the mistake. Again it was a rookie mistake where my class was inserted after the tag instead of inside the <td>tag. But while we are at it. I been looking and looking for a way to edit my question, I can't find a link on the site to direct me to the questions I ask. would you know if there is such a link and if so where can I find it? that way I will be able to respond to my own questions (when I do rookie mistakes and find them and don't clutter the board for nothing)

How to select records which are added during last week

I have a scenerio in which I have a person dimension, which includes all the information about the person. I want to take two extracts out of it. One is monthly and one is on weekly basis. In the monthly I am just taking data for that particular month and then joining it with the Fact table. It is simple and I have already done it. I am having trouble for doing it on weekly basis of the current month, what I want to do is after the 1st week I want to select the new persons which were added (delta) during the 1st week. In the end of 2nd week I want to select those records which were added during 2nd week and so on for all the 4 weeks. e.g.
Day
8     The persons which were added during 1st 7th
15     The persons which were added during 8th 14th
23     The persons which were added during 15th 22nd
31     The persons which were added during 23rd 31st
Any suggestions will be appriciated please. Thanks

A few steps arem required
1) when inserting or updating a record in the target table set wk and mth IND to 'N'
2) when running the week load after loading the data in the proper target end table
set the wk ind to 'N' where wk_ind = 'Y'
3) when running the month load after loading the data in the proper target end table
set the wk ind to 'N' where mth ind = 'Y'
did this help ?
DJ

How to select records filter by the value which stored in xml field

I read many datas to solve my problem,but those doesn't work...
At first, I create a table in sqlserver
CREATE TABLE [dbo].[Demo](
[ID] [int] IDENTITY(1,1) NOT NULL,
[Content] [xml] NOT NULL
Then I insert two records:
INSERT INTO Demo(Content) VALUES(
'<plan>
<teachers>
<teacher>1</teacher>
<teacher>2</teacher>
</teachers>
</plan>')
INSERT INTO Demo(Content) VALUES(
'<plan>
<teachers>
<teacher>3</teacher>
<teacher>4</teacher>
</teachers>
</plan>')
Now ,I want to get the records which the Content field's teacher=3. I try my best to sovle it ,but I can't.
Are there somebody can help me? Thanks !

You can use the .exist method to do that. Try these:
SELECT *
FROM Demo
WHERE Content.exist('plan/teachers/teacher[. = 3]') = 1
DECLARE @teacherId INT = 3
SELECT *
FROM Demo
WHERE Content.exist('plan/teachers/teacher[. = sql:variable("@teacherId")]') = 1

How to select for insert a long column through database link?

How may a long column (for example a sql server 2000 text column) be selected for insert into a clob column in table in 10g over a database link without invoking ora-00997?
I've tried using dbms_metadata_util.long2clob without success over a database link.

Is the remote database an Oracle database? Or are you selecting data from SQL Server 2000 over a database link via Heterogeneous Services? What is the data type of the column in the remote database (LONG? TEXT? Something else?)?
Justin

How to select all the rows of table control in BDC

Hi All,
While I am doing BDC for Transaction Code MC88, After the first screen I will get another screen with tabble control, Here I need to select all the rows of table control, I am assignng the 'X' to the first field of Table Control which is the indicator for selection.
Here I am getting message called Indicator field is not in program and screen.
While doing Recording I am not able to record the indicator, Please any one let me know how to record the Entire table control selection.
Thanks in advance..

Sorry about that lakshmi. Here is my code.
    PERFORM dynpro USING : 'X'   'SAPMMCP6'          '0105',
                           ' '   'RMCP2-MATNR'       t_matnr,
                           ' '   'RMCP2-WERKS'       t_werks,
                           ' '   'BDC_OKCODE'        '=AKTV'.
    PERFORM dynpro USING : 'X'   'SAPLMCPA'          '0707',
                           ' '   'BDC_OKCODE'        '=MRKE'.
    PERFORM dynpro USING : 'X'   'SAPLMCPA'          '0707',
                           ' '   'BDC_OKCODE'        '=GRAO

How to achieve atomic insertion in multiple tables in ADF ?

I am trying to implement a situation where:-
There is a screen which allows the user to enter information regarding "Orders" and "OrderLines". The information related to the orders is stored in the "Orders" table & information related to order lines in the "OrderLines" table.
Say for a particular order, there are 4 order lines, then one record should get inserted into the "Orders" table and 4 in the "OrderLines" table. Each record in the "OrderLines" table will have a foreign key reference to the record for the new order.
So the point is that I want both these operations-insertion into the "Orders" table and insertion in the "OrderLines" table to be atomic i.e. either both operation succeed or both operation fail.
How to do this in ADF ?
Any Help.

Thanks for the Reply,
But I want both these operations-insertion into the "Orders" table and insertion in the "OrderLines" table to be atomic i.e. either both operation succeed or both operation fail.
If there was an insert action on first table and 2nd one fails then i want to rollback the changes in first table as well.
Is this default?

How to select records inserted in a table in last 30 mins

Similar Messages

Maybe you are looking for