HOW TO ENABLE ITEM IN RECEIVABLES TO CREATE TRANSACTION IN R12 VERSION

I am Using R12
I created one Item In Inventory for operating Unit x1,
and for that item i enabled the options
Invoicing
---> Invoiceable item
---> Invoice Enabled
Inventory
---> Inventory Item
---> Stockable Item
---> Transactable Item
When i am creating a new Transaction in X1 operating unit i am not getting the item in the LOV of item. i am getting other items in other operating units but not in X1 operating unit.
How to enable that item for transaction.
I Have To Change any Profile option.
Are Any setup Issue.
Thanks In Advance
Prince

Hi Prince
You need to post this to an Apps specific forum.
regards, Tim

Similar Messages

  • Exchange 2010 SP3 - How many Calendar Items/Folders can you create under "all public folder"

    Hi,
    Is there a limitation on how many calendar items/folders you can create under "all public folder" in Exchange 2010 SP3?
    Thank you

    I don't believe you can create calendar items under the root folder, but it's been so long since I worked with a system that had public folders that I'm not sure.  If you mean "a folder that can contain calendar items", that is not a calendar
    item itself.
    Now, I believe your underlying question is, "How many folders can be created at the root level of the public folder hierarchy?"  If so, there is no simple limit that I know of (you can have thousands, if you really want), but management gets
    pretty unruly with the more that you have.  I normally recommend that you create sub-folders to logically meet your requirements, then have each of these with more folders (normally that only specific groups of users will be able to access or add items
    to).  And anyone will tell you that you want to restrict anyone from creating their own folders at the root level.  In fact, this is the default setting for a new Exchange 2010 installation.
    I'll add that you really should stop trying to use public folders, since there are newer technologies (SharePoint, for instance) that work much better and are much easier to use.

  • How to enable if I receive a massage 'Your appla ID has been disables"?

    How to enable if I receive a massage 'Your appla ID has been disables"?

    Read here:
    http://support.apple.com/kb/TS2446

  • Error -creating Recurring Invoice-R12, Version 12.1.1.

    Hi,
    When I am creating the Recurring invoice in accounts Payable( R12, Version 12.1.1.) I got the following error message
    "APP-SQLAP-10000: ORA-04062: signature of package "APPS.AP_ETAX_PKG" has been changed occurred in
    Get_Quote<-Calculate_Tax<-Post-Query<-CREATE_REC_INV
    with parameters (&PARAMETERS)
    while performing the following operation:
    Calling Payables eBTax API
    FRM-40735: POST-QUERY trigger raised unhandled exception ORA-20002."
    Can any one help me to solve this problem.
    Thanks & Regards
    zunaitha

    Hi
    Please go through the Doc ID: 457033.1 & Note 216225.1 from the metalink.
    Thanks
    srinivask

  • Now using imovie 11, how to import imovie projects which were created in an earlier version of iMovie?

    anyone got a similar situation?

    Excellent information from John, to which it may be worth adding that you can of course continue to run iMovie 6 alongside iMovie 11 on your Mac:
    Happily this is easily achieved, but it has to be done backwards.
    Delete iMovie 11 (just drag it to the trash). Now install iMovie 6 from the iLife 6 install disks. Update it to iMovie 6.0.3.
    Now re-install iMovie 11. This automatically moves iMovie 6 into a folder it creates in your Applications folder called iMovie Previous Version.
    Then reinstall iMovie 11.
    iMovie 6 works great with iDVD 7.
    Now you have them both, and you can have both in the Dock as well.

  • How to enable Explain plan in TOAD

    Hi,
    I am using toad version 8.6.1.Whenever i login as my userid and run a sql stmnt i am trying to get explain plan from toad explain plan button.But it's not showing anything some times it says insuffcient privileges.I created synonym called plan_table which is based on actual plan_table.But no luck.Can you pls help me how to enable explain plan in toad
    Thanks
    Anand

    Anand,
    in earlier versions of Toad you could use the notoad.sql or toadprep.sql to create the required tables.
    In your version it is probably already has been replaced by menu option Tools->Server Side Object Wizard.
    Toad does not use the plan_table - it creates it's own set of tables including the table for the explain plan.
    Mike

  • How to get item field values for old versions?

    I need to be able to query old field values from previous versions of items in a SharePoint list. I can't execute code on the server (it needs to work with SharePoint Online/O365 for a start).
    So far the ONLY API I've that lets me do this is the lists.asmx GetVersionCollection SOAP call.
    This lets me specify a single field name and returns an XML structure with the values for the various versions, along with the modification time and who made the change - but NO reliable way of actually identifying *which* version (i.e. an ID or label). That
    is, if I know I need to fetch the Title value from version 512 ("1.0") of item 1 in list "Documents", I don't see how to reliably parse the results to determine which entry is version 512. While they may be returned in order, in many cases
    the entries are actually missing when there was no field value present (or perhaps when the field hadn't been created yet). I've tried comparing the Modified date to the Created date of the corresponding FileVersion item (which I can get via CSOM or REST),
    and while it works some of the time, it's not reliable. I've also looked at the output from the lists.asmx GetVersion API but I don't see how that's useful either, as the Created property for all versions always seems to be just the date the file was originally
    created.
    It does seem odd to me that there's not a neat way of doing this - if I need to return information for several fields but just for a single version, I have to make a whole lot of requests that return far more info than I need, and then I need to figure out
    how to parse the returned text in the case of, say, multiple-value taxonomy fields etc.
    Anyone tried doing anything similar here?
    Thanks
    Dylan

    try these links:
    https://support.office.microsoft.com/en-us/article/Track-and-view-version-information-for-SharePoint-list-items-2d69d936-fb0b-4c84-830e-11708e6ec317?CorrelationId=f87cf6ea-8cbf-446a-a4a0-e2c3a86b3425&ui=en-US&rs=en-US&ad=US
    https://social.technet.microsoft.com/Forums/en-US/e48ff216-7ed1-4b20-9f21-d496b1583eea/how-to-get-item-field-values-for-old-versions?forum=sharepointdevelopment
    http://sharepoint.stackexchange.com/questions/20019/get-meta-data-from-a-previous-version-of-a-document-through-webservice-in-moss-2
    http://sharepoint.stackexchange.com/questions/121594/getting-information-from-previous-versions-of-a-sp-list-using-csom
    Please mark answer as correct if it is correct else vote for it if you find it useful Happy SharePointing

  • May i know how to create Transactional Infocube, Data from cube to cube

    Hi All,
    I need to create a Transactional Infocube. Can anyone help me how to create that. and how it differs from Basic cube while creating Transactional Infocube.
    My other question is how to load data from one cube to another.( is it possible from basic to transactional )
    It's urgent.
    regards,
    Ali

    Hi Ali,
    http://help.sap.com/saphelp_sem60ep1/helpdata/en/7b/a90e78d10311d4b3490050dadfb23f/frameset.htm
    Transactional InfoCubes differ from Basic InfoCubes in their ability to support parallel write accesses. Basic InfoCubes are technically optimized for read accesses .
    Use
    Transactional InfoCubes are used in connection with the entry of planning data. See also Overview of Planning with BW-BPS. The data from this kind of InfoCube is accessed transactionally, meaning data is written to the InfoCube (possibly by several users at the same time). Basic InfoCubes are not suitable for this. You should use Basic InfoCubes for read-only access (for example, when reading reference data).
    transactional infocubes can be filled with data using two different methods: using the transaction of BW-BPS to enter planning data and using BW staging, whereas planning data then cannot be loaded simultaneously.
    Anyway, the data from this kind of infocube is accessed transactionally, meaning data is written to the infocube (possibly by several users at the same time); basic infocubes are not suitable for this. I think this is the only proper use of this type of cube...
    We have an option to switch the Tranasaction cube such as "Loding allowed and Planning not allowed" and "Planning allowed and loading not allowed".
    please check these links,
    http://help.sap.com/saphelp_nw04/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
    function module to read and write to a transactional infocube
    read and write to transactional infocube
    read and write to a transactional infocube
    Regards,
    Priyanka

  • Cannot open iTunes-receiving error message "The  file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes" How do I correct this and access my iTunes?

    I am not able to open my iTunes on my HP pavilion dv7-3173nr entertainment notebook: I receive error message: The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".    How can I correct this so that I can open my iTunes on my notebook?? dorothy278

    The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes".
    Try the following user tip:
    Empty/corrupt iTunes library after upgrade/crash

  • How to enable purchasing tab in BOM, while defining bom for a item

    dear gurus,
    while defining a bom for a item, there ae various tabs like main, effectivity, OM etc. among that purchasing tab is in disabled state. how to enable that.
    pls provide setup and whats actual use of that.
    waiting fr reply.

    Dear,
    For a phantom assy the special procurement key in the material master should be 50. You have done the right thing.
    But in the BOM of FERT please remove the phantome assy Off indicator. Once you maintained the special procurement key 50 in material master, the phantom indicator will be acutomatically set in the high level bom.
    Hence if you activate the phantom assy off then this will override the phantom indicator
    For more understanding please see trhe below links
    http://www.sap-img.com/production/what-exactly-is-a-phantom-item-or-assembly-means.htm
    Regards,
    R.Brahmankar

  • How To Enable Group Layout When Creating Chart in Crystal Reports XI

    Hi
    I Created a chart, and i placed the same on Report Header, when i want to change the layout Option As Group, it is disabled, how to enable the Group Layout Option.

    Hello
    You should have your group already created and your summary. you place your graph outside the group (RH or RF)
    Luc

  • How programmatically "enable" the Page to have Item level security

    Some body known how do we programmatically "enable" the Page to have
    Item level security. - analogous to checking the box in the Page edit mode for "Enable item level security"

    Hi, I only know portal.wwsbr_api.enable_ils_for_item.....
    You can perform actions on multiple objects simultaneously.
    Navigator > Page Groups(TAB) > PageGroup > Page > actions(link)
    Click on actions link and in LOV, select "Enable ILS".
    Hope this help.

  • Create a counter(in a query) by how many unique items are in a document num

    Hi,
    Is there a way for me to create a counter(in a query) by how many unique items are in a document number?
    If you look at the bold amounts below they have two unique item numbers 3 & 11. Because of that data is being duplicated in the InfoSet. The Subtotal needs to be 13500 instead of 27000. The two subtotals above are correct. I was thinking if I can create a create a counter(in a query) by how many unique items are in a document number (in this case it would be 2). And then if i divide Quantity by that counter, i shall get the correct value of 13500.
    How can i do this?
    Thanks
    Doc Num                  Item #       Quantity
    5900001759     11     2,700
    5900001759     11     5,400
    5900001759     11     2,700
    5900001759     11     2,700
    5900001759          13,500
    5900001890     7     2,700
    5900001890     7     5,400
    5900001890     7     2,700
    5900001890     7     2,700
    5900001890          13,500
    5900002176     3     2,700
    5900002176     11     2,700
    5900002176     3     5,400
    5900002176     11     5,400
    5900002176     3     2,700
    5900002176     11     2,700
    5900002176     3     2,700
    5900002176     11     2,700
    5900002176          27,000          
                             54,000

    Create a New Calculated Key Figure
    From the context menu for the Formula Variable, choose New Variable
    Choose the Processing type as Replacement Path
    In the next screen, select the Characteristic Info Object based on which the number of documents is to be displayed in the report (For example: Document Number / Order Number).
    Choose Next.
    In the Replace Variable with drop down box, choose Attribute Value.
    In the Attribute drop down, select Characteristic Reference (Constant 1).
    Choose Next.
    On the Save Variable page, an overview of the settings made for the variable will be displayed.
    Confirm the entries and Choose Finish.
    Open the formula variables directory and use Drag & Drop to transfer the formula variable
    To avoid the warning message, the formula variable is multiplied by 1
    The most important step here is to set the Time of Calculation to After Aggregation in the KF properties.
    (by Default the Time of Calculation is set to After Aggregation)
    The new calculated key figure is available under Calculated Key Figure in the Key Figure directory, and can be included in the query definition using Drag & Drop.
    Hope this help
    Rgds

  • How do I enable the FM receiver on my iPhone 6

    how do I enable the FM receiver on my iPhone 6

    The FM receiver is there, as its part of the Hardware. but its inaccessible, and not connected to anything. Even if you could enable it, the lack of an external antenna would render it useless.
    There are groups that will open the Phone (voiding the warranty in the process) and enable the Fm antenna and maybe even attach it to the external casing, but as has been amply mentioned already  in another thread, FM requires a pretty long antenna (i.e wired earphones) to work even remotely well.
    So there would have to be some major reworking of the iPhones internals to even begin to get it to work.
    You can read Lawrence Finch's excellent explanation on the subject here:
    FM radio for iPhone!, FM radio for iPhone!
    In short, its not something easily accomplished, nor is the end result really worth all the trouble.

  • How to enable excel downloading in ALV grid report.

    Hi all,
    How to enable excal downing in ALV grid report?
    Thanks in Advance.
    Siva Sankar.

    hi
    check the following code
    Example of a Simple ALV Grid Report
    REPORT  ZTUFI091                                .
    *& Report  ZDEMO_ALVGRID                                               *
    *& Example of a simple ALV Grid Report                                 *
    *& The basic requirement for this demo is to display a number of       *
    *& fields from the EKKO table.                                         *
    *REPORT  zdemo_alvgrid                 .
    TABLES:     ekko.
    type-pools: slis.                                 "ALV Declarations
    *Data Declaration
    TYPES: BEGIN OF t_ekko,
      ebeln TYPE ekpo-ebeln,
      ebelp TYPE ekpo-ebelp,
      statu TYPE ekpo-statu,
      aedat TYPE ekpo-aedat,
      matnr TYPE ekpo-matnr,
      menge TYPE ekpo-menge,
      meins TYPE ekpo-meins,
      netpr TYPE ekpo-netpr,
      peinh TYPE ekpo-peinh,
    END OF t_ekko.
    DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
          wa_ekko TYPE t_ekko.
    *ALV data declarations
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
          gd_tab_group type slis_t_sp_group_alv,
          gd_layout    type slis_layout_alv,
          gd_repid     like sy-repid,
          gt_events     type slis_t_event,
          gd_prntparams type slis_print_alv.
    *Start-of-selection.
    START-OF-SELECTION.
    perform data_retrieval.
    perform build_fieldcatalog.
    perform build_layout.
    perform build_events.
    perform build_print_params.
    perform display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    form build_fieldcatalog.
    There are a number of ways to create a fieldcat.
    For the purpose of this example i will build the fieldcatalog manualy
    by populating the internal table fields individually and then
    appending the rows. This method can be the most time consuming but can
    also allow you  more control of the final product.
    Beware though, you need to ensure that all fields required are
    populated. When using some of functionality available via ALV, such as
    total. You may need to provide more information than if you were
    simply displaying the result
                  I.e. Field type may be required in-order for
                       the 'TOTAL' function to work.
      fieldcatalog-fieldname   = 'EBELN'.
      fieldcatalog-seltext_m   = 'Purchase Order'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
    fieldcatalog-do_sum      = 'X'.
    fieldcatalog-no_zero     = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EBELP'.
      fieldcatalog-seltext_m   = 'PO Item'.
      fieldcatalog-col_pos     = 1.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'STATU'.
      fieldcatalog-seltext_m   = 'Status'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'AEDAT'.
      fieldcatalog-seltext_m   = 'Item change date'.
      fieldcatalog-col_pos     = 3.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MATNR'.
      fieldcatalog-seltext_m   = 'Material Number'.
      fieldcatalog-col_pos     = 4.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MENGE'.
      fieldcatalog-seltext_m   = 'PO quantity'.
      fieldcatalog-col_pos     = 5.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MEINS'.
      fieldcatalog-seltext_m   = 'Order Unit'.
      fieldcatalog-col_pos     = 6.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'NETPR'.
      fieldcatalog-seltext_m   = 'Net Price'.
      fieldcatalog-col_pos     = 7.
      fieldcatalog-outputlen   = 15.
      fieldcatalog-datatype     = 'CURR'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'PEINH'.
      fieldcatalog-seltext_m   = 'Price Unit'.
      fieldcatalog-col_pos     = 8.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    endform.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    form build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
    gd_layout-totals_only        = 'X'.
    gd_layout-f2code            = 'DISP'.  "Sets fcode for when double
                                            "click(press f2)
    gd_layout-zebra             = 'X'.
    gd_layout-group_change_edit = 'X'.
    gd_layout-header_text       = 'helllllo'.
    endform.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    form display_alv_report.
      gd_repid = sy-repid.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
                i_callback_top_of_page   = 'TOP-OF-PAGE'  "see FORM
                i_callback_user_command = 'USER_COMMAND'
               i_grid_title           = outtext
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
               it_special_groups       = gd_tabgroup
                it_events               = gt_events
                is_print                = gd_prntparams
                i_save                  = 'X'
               is_variant              = z_template
           tables
                t_outtab                = it_ekko
           exceptions
                program_error           = 1
                others                  = 2.
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          Retrieve data form EKPO table and populate itab it_ekko
    form data_retrieval.
    select ebeln ebelp statu aedat matnr menge meins netpr peinh
    up to 10 rows
      from ekpo
      into table it_ekko.
    endform.                    " DATA_RETRIEVAL
    Form  TOP-OF-PAGE                                                 *
    ALV Report Header                                                 *
    Form top-of-page.
    *ALV Header declarations
    data: t_header type slis_t_listheader,
          wa_header type slis_listheader,
          t_line like wa_header-info,
          ld_lines type i,
          ld_linesc(10) type c.
    Title
      wa_header-typ  = 'H'.
      wa_header-info = 'EKKO Table Report'.
      append wa_header to t_header.
      clear wa_header.
    Date
      wa_header-typ  = 'S'.
      wa_header-key = 'Date: '.
      CONCATENATE  sy-datum+6(2) '.'
                   sy-datum+4(2) '.'
                   sy-datum(4) INTO wa_header-info.   "todays date
      append wa_header to t_header.
      clear: wa_header.
    Total No. of Records Selected
      describe table it_ekko lines ld_lines.
      ld_linesc = ld_lines.
      concatenate 'Total No. of Records Selected: ' ld_linesc
                        into t_line separated by space.
      wa_header-typ  = 'A'.
      wa_header-info = t_line.
      append wa_header to t_header.
      clear: wa_header, t_line.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
           exporting
                it_list_commentary = t_header.
               i_logo             = 'Z_LOGO'.
    endform.
          FORM USER_COMMAND                                          *
          --> R_UCOMM                                                *
          --> RS_SELFIELD                                            *
    FORM user_command USING r_ucomm LIKE sy-ucomm
                      rs_selfield TYPE slis_selfield.
    Check function code
      CASE r_ucomm.
        WHEN '&IC1'.
      Check field clicked on within ALVgrid report
        IF rs_selfield-fieldname = 'EBELN'.
        Read data table, using index of row user clicked on
          READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
        Set parameter ID for transaction screen field
          SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
        Sxecute transaction ME23N, and skip initial data entry screen
          CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
        ENDIF.
      ENDCASE.
    ENDFORM.
    *&      Form  BUILD_EVENTS
          Build events table
    form build_events.
      data: ls_event type slis_alv_event.
      call function 'REUSE_ALV_EVENTS_GET'
           exporting
                i_list_type = 0
           importing
                et_events   = gt_events[].
      read table gt_events with key name =  slis_ev_end_of_page
                               into ls_event.
      if sy-subrc = 0.
        move 'END_OF_PAGE' to ls_event-form.
        append ls_event to gt_events.
      endif.
        read table gt_events with key name =  slis_ev_end_of_list
                               into ls_event.
      if sy-subrc = 0.
        move 'END_OF_LIST' to ls_event-form.
        append ls_event to gt_events.
      endif.
    endform.                    " BUILD_EVENTS
    *&      Form  BUILD_PRINT_PARAMS
          Setup print parameters
    form build_print_params.
      gd_prntparams-reserve_lines = '3'.   "Lines reserved for footer
      gd_prntparams-no_coverpage = 'X'.
    endform.                    " BUILD_PRINT_PARAMS
    *&      Form  END_OF_PAGE
    form END_OF_PAGE.
      data: listwidth type i,
            ld_pagepos(10) type c,
            ld_page(10)    type c.
      write: sy-uline(50).
      skip.
      write:/40 'Page:', sy-pagno .
    endform.
    *&      Form  END_OF_LIST
    form END_OF_LIST.
      data: listwidth type i,
            ld_pagepos(10) type c,
            ld_page(10)    type c.
      skip.
      write:/40 'Page:', sy-pagno .
    endform.
    hope it will help you
    regards
    sreelatha gullapalli

Maybe you are looking for