How to enable Memory profiling?

I created a simple empty project in Jdeveloper and created a sample standalone Class file. For some reason the Memory Profile option is not enabled. ( I have selected the class file. Even then it is not enabled.)
JDeveloper version: 10.1.3
JDK version 1.4.2_06 (Installed OJVM libraries)
Thank you for your help!

Nevermind. Just found the answer from this thread
Profiler menu items not enabled
Thanks.
Yes. I am using OJC compiler instead of javac.
Should I enable Remote Debugging and profiling? If so how to start the profiler, by default it is trying to connect port 8000 on localhost. Am I doing something wrong?
Message was edited by:
saro28

Similar Messages

How to do memory profiling remotely???

Hi,
We are using JDeveloper 10g (10.1.2.1.0) and Oracle Application Server 10g (10.1.2.0.2) to deploy our web application, its running on a Solaris OS. We would like to know how to make a remote memory profiling for this configuration. JDeveloper help is very ambiguous, and very short.
Anybody could help us a little bit with this? How we can configure OC4J JVM to attend remote memory profiling requests? How we can connect and run the JDeveloper memory profiling extension over this OC4J JVM?....
Thanks in advanced.

Nice to read it ;-)
Any other option to profile memory remotely on Solaris and OC4J JVM? Maybe any JDeveloper plugging or any standalone recommendable product? Or I could thinking in cutting my veins already?
Thanks for your answer.

How to enable the memory remapping in the bios?

How to enable the memory remapping in the bios?
my laptop: m100 psmaaq-00s003

Without removing a specific Windows Update KB Patch, and two registry keys, you CANNOT uninstall the Flash Player ActiveX Plug-in for IE in Win 8.
Microsoft released a new update for Flash Player in IE just the other day.
Have you run Windows Update recently?

How to enable ABAP maaping in Exchange Profile.

Hi Guys,
Where and how can I enable ABAP mapping in exchange profile?
Regards,
XIer

Hi,
See this document. It has shown how to enable it in exchange profile:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
Regards,
---Satish

How to Enable Plugin before File Opened And Load PDF File From memory?

hello everyone,
there have two problems,all i want to do is to show a pdf file encrypted by AES algorithm.
1.one is how to enable plugin before file opened?
i developed another two plugin,and each enabled after one pdf file was opened,and now i want to replace the file open command and can do some word by meself,such as decrypt the pdf ?
2.another is how to load pdf file from memory?
if i can enable plugin before file opened,and than i can read the file and decrypt it,and now i want to do is do load the decrypt file (in memory) into the adobe?
i tried many method,but all in vain.who can help me or give me some advice?
thanks.
merry chrismas to everyone.

The proper way to handle other file formats (even where it is really a PDF that has been "wrapped") is to create an AVConversionHandler.
To load a PDF from a source other than the file system, you need to create a custom AVFileSys.

How do you get custom Default Settings to enable lens profile corrections automatically on import?

I have created default settings by serial number for my Canon Mark III 1ds which include enabled lens profile corrections. I then created a user preset with these default corrections. Next I imported a folder of RAW images shot with this same Canon camera with the user profile checked as part of the import. When I switch to the Develop module and check the Lens Corrections panel, I see that although it is checked for each file, the actual make, model and profile are not populated.
Is this a bug or am I overlooking something on import? I understand that in LR 4, you can apply specific lens and camera calibration profiles to camera serial numbers (noise reduction etc too).
MacPro 2.8 Ghz Quad-Core Intel Xeon with 16 gigs of ram running OSX 10.7.2.

You can make your defaults specif to ISO and/or Camera Serial or not (see Preferences), but what you choose is valid for all default parameters. You cannot say "use my NR ISO-specific, but the rest of the parameters regardless of ISO".
Beat

Memory profiler disabled in JDeveloper 10.1.3.3.0.4157?

Hi,
I'm using JDeveloper 10.1.3.3.0.4157, and it seems that the memory profile is disabled in this version. Or isn't it? How do I enable it?
Thanks in advance!

Make sure your project is using the OJVM.
See: http://blogs.oracle.com/shay/2007/02/are_you_getting_the_most_out_o.html

[Troubleshoot] MSI Gaming 7 ~ How to enable XMP with HyperX Fury RAM?

Hi folks,
First time posting here and new to the MSI brand with a Gaming 7 and MSI GTX 970 Gaming 4G GPU. They are quite awesome so far.
Anyway, I'm also new to the intel world after using AMD chips for the past number of years and I am wondering what is this buzz about XMP profiles? My new RAM sticks support XMP according to their website. But I'm not sure how to enable them in the UEFI Bios. Videos show that there should be a button right above the GENIE OC but I dont see one. Can someone help me understand how to enable it?
Spec info:
Intel 4790k
Gaming 7 Motherboard
HyperX Fury RAM, 2x8GB (16GB) 1866mhz
EDIT: I cannot share external links but if you search xmp hyperx certifications you'll see that the RAM is XMP ready.
Thanks!

Quote from: rp00 on 03-June-15, 22:47:43
but if you set your mem settings to auto, it should pick up 1866 speed from SPD
Check with CPU-Z
Such is not possible. Programmed SPD settings to be used depend on the abilities of the memory controller (here means the cpu) used. The maximum specified memory support of an i7 4790K is DDR3 and DDR3L 1333/1600 (http://ark.intel.com/products/80807/Intel-Core-i7-4790K-Processor-8M-Cache-up-to-4_40-GHz). It is therefor impossible to run memory without an XMP extension (like the Fury sticks) on the platform in question above ddr3 1600 without setting speeds and timings manually.

Crash when starting a performance/memory profile

I'm having a catastrophic crash when I hit the 'Start' button in the Profile -> Performance and Memory... dialog. There is no error message whatsoever, and when I restart Labview, it only asks me about files to recover, it doesn't tell me where it crashed (i.e. somefile.cpp line ###). Well, it might have told me once, but now it doesn't, so unless there is a log of these things somewhere, I can't say much more.
I'm using Labview 2009, and I'm having the exact same issue on at least 2 machines which are fairly different (Win XP 32 bit vs Win7 64 bit (with Labview 32 bit)).
The application is pretty large (~1500 vi's), so it's kind of hard to tell what is making it crash.
The problem can be replicated in different ways:
1) Load main VI which loads all the VI's in memory
2) Start Performance/Memory profile *crash*
1) Load VI
2) Start VI (runs in a loop)
3) Start Performance/Memory profile while it runs *crash*
1) Start Performance/Memory profile
2) Some NI VI's show up in the list with '0' time everywhere
3) Load VI
4) Execute VI
5) Stop execution of VI *crash*
Any clues? Is there a log somewhere that could help me/you find the issue?
I could spend all day trying to load different parts of the project and look for problems, but I have no idea what to look for.
Last Friday I had successfully profiled what I wanted to, then I had another crash... Oh I remember now... I did a 'Search' in my project, looked for a particular string, and it crashed after a while in the middle of the search. Since then I was unable to use the profile tool. Could it be some data corruption? We use SourceSafe... so I wouldn't be surprised if it gave me a corrupted file If so, how could I find it?
Thank you

Hey Samapico,
I actually found an incident like yours involving the performance and memory tool crashing when used for specific VIs which were very large. How big (in terms of filesize) is your VI?
R&D found this issue in LV 2009 and fixed it in 2010 under Corrective Action Request 215410.
Is there any way you could try and test your issue out on a machine with LV 2010?
<Joel Khan | Applications Engineering | National Instruments | Rice University BSEE>

How to create custom profile provider for fba user

Hello Every One
I have one SharePoint 2010 web application and on this FBA is configured. With help of code how can I get and set custom property for a user in
“aspnet_Profile” table in Database.
I have also try this config setting in web.config but not able to set or get profile property.
<anonymousIdentification enabled="true" />
<profile defaultProvider="AspNetSqlProfileProvider">
<providers>
<clear />

<add name="Demo_ProfileProvider" connectionStringName="fbaSQL" applicationName="/" type="System.Web.Profile.SqlProfileProvider,System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers>
<properties>
<add name="ThemeName" type="String" allowAnonymous="true" />
<add name="NoOfVisits" type="int" allowAnonymous="true" />
</properties>
</profile>
</system.web>
thanks
navaratan
Navaratan Sharma

Solution for this problem is
do following entry in web.config
<anonymousIdentification enabled="true" />
<profile enabled="true" defaultProvider="AspNetSqlProfileProvider">
<providers>
<clear />


<add name="AspNetSqlProfileProvider" connectionStringName="fbaSQL" applicationName="/" type="System.Web.Profile.SqlProfileProvider,System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers>
<properties>
<add name="ThemeName" type="String" allowAnonymous="true" />
<add name="NoOfVisits" type="int" allowAnonymous="true" />
</properties>
</profile>
</system.web>
code for get and set Profile property is
protected void OnClickbtn(object sender, EventArgs e)
try
ProfileBase profile = System.Web.Profile.ProfileBase.Create(HttpContext.Current.User.Identity.Name);
profile["ThemeName"] = txtTheme.Text;
profile["NoOfVisits"] = int.Parse( txtNoOfVisits.Text);
profile.Save();
catch (Exception ex)
protected void OnClickbtnGet(object sender, EventArgs e)
try
ProfileInfoCollection profiles = ProfileManager.GetAllProfiles(ProfileAuthenticationOption.All);
foreach (ProfileInfo profileInfo in profiles)
ProfileBase profile = ProfileBase.Create(profileInfo.UserName);
// add condition for user
txtTheme.Text = (string)profile.GetPropertyValue("ThemeName");
txtNoOfVisits.Text = Convert.ToString((int)profile.GetPropertyValue("NoOfVisits"));
SPUser user = SPContext.Current.Web.CurrentUser;
catch (Exception ex)
thanks
navaratan
Navaratan Sharma

How to enable execute-disable bit and other hidden settings on Lenovo 3000 N200 model 0769!

2008-11-16: I have posted some more settings, scroll down to message 19 in this thread to read them.
Hi,
Here's some good news for anyone with a Lenovo 3000 N200 model 0769, who is disappointed and frustrated with the lack of options in the BIOS setup menu. (I had a moan about that in this thread.)
This is a long post but I hope you'll find it worthwhile. Here are the features/settings which I will explain how to enable:
The BIOS disables the execute-disable bit function of the CPU, with no way to turn it on. You can enable it.
You can set VGA and VESA graphics modes to not be stretched to fill the whole screen (sharper graphics with no distorted aspect ratio).
Speed up the POST display by skipping the memory test
Disable various features (if you don't use them, that might save some power): the HD audio controller, WLAN card, on-board LAN, shadowing of the video BIOS
Enable beep before booting the OS
Enable key click sound (only in DOS, not Windows or Linux)
I'm still working on this, and hope to figure out more hidden settings soon, e.g. to disable the DVD drive and trackpad, and to change the video output from NTSC to PAL.
The information below applies to the Lenovo 3000 N200 model 0769 with BIOS version 3.03. My N200 has Nvidia graphics. For some background on the general principles/research required to figure this out, please see this thread at Wimsbios.com.
To change the settings, you need to create a bootable DOS floppy disk or USB drive. Download SYMCMOS.EXE (Google for it) and put it on the bootable disk. Boot the disk and run SYMCMOS to back up your current CMOS settings: SYMCMOS -Lsettings.txt
Next load the settings.txt into a text editor. It will begin like this:
( SYMBOLIC CMOS EDITOR - Version 643710-035 )
CRC = 3EDD
(0000) [0001]
(0003) [0001]
Your CRC value may differ. Each line after the CRC contains a token number, followed by the value of that token. You can start with the settings.txt you created and edit any tokens you want to change, or delete all token lines and just include the tokens you want to change. Then use SYMCMOS.EXE to apply the new file: SYMCMOS -V2 -Uupdate.txt
After running that command you can reset, and hopefully notice the new settings in action. (For certain settings, such as re-enabling the execute-disable bit, you need to turn the computer off then on again.)
Here are some specific tokens you can change:
Token Default New Description
(0000) [0001] [0000] Disable the HD audio controller
(0042) [0001] [0000] Disable LCD panel graphics scaling/stretching
(004B) [0000] [0001] Beep before booting the OS
(0267) [0001] [0000] Enable support for the CPU execute-disable bit
(028E) [0000] [0001] Enable key click (only works in DOS and BIOS setup)
(02A3) [0001] Set to 0 for slower memory test, or 2 (or 3?) to skip
test for faster booting, especially with 4GB RAM
(046E) [0001] [0000] Disable video BIOS shadowing. (Best to leave enabled.)
(0471) [0000] [0001] Enable 1MB memory hole at 15MB. (Best leave disabled.)
(0486) [0001] [0000] Disable PCI Express ports 1-6. This takes precedence
over the individual port bits below, and disables the
LAN, WLAN and (probably) ExpressCard port.
(0489) [0001] [0000] Disable PCI Express port 2 (WLAN card)
(048C) [0001] [0000] Disable PCI Express port 3 (maybe ExpressCard?)
(048F) [0001] [0000] Disable PCI Express port 4 (LAN)
For example, if you want to disable LCD panel scaling and enable the execute-disable bit, you would create a text file like this:
CRC = 3EDD
(0042) [0000]
(0267) [0001]
Some final points:
Loading the default settings in the BIOS setup menu will overwrite any changes you make using SYMCMOS.EXE. So keep that bootable disk around in case you need to re-apply your settings in future.
The token numbers above are specific to version 3.03 of the Lenovo 3000 N200 model 0769 BIOS. They might be different for earlier BIOS versions, and will be different for other models of computer.
Once you have created a bootable floppy disk with a text file containing your updated settings, you could create a bootable CD with the floppy's data on. Just boot that CD to restore your settings in future.
Before experimenting with randomly changing token values to discover other hidden settings, make sure you know how to reset your computer's CMOS memory! Changing some settings results in your computer becoming unable to boot, so you can't use the BIOS setup screen to reset. I wrote about how to reset the N200 model 0769 CMOS in this thread.
If you discover any other settings, please let me know.
Any changes made are at your own risk; if you "brick" your laptop don't blame me!
Message Edited by Donuts on 10-15-2008 09:45 AM
Message Edited by Donuts on 11-16-2008 11:35 PM

Hi Donuts !
My computer is a 3000 N200 0769BAG. It has a Dual Core Pentium and the information I get about the BIOS using lshw are :
========================================================================================
description: BIOS
          vendor: LENOVO
          physical id: 0
          version: 68ET35WW (04/16/2008)
          size: 106KiB
          capacity: 960KiB
          capabilities: pci pnp apm upgrade shadowing escd cdboot bootselect edd int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot biosbootspecification
====================================================================================
I've nothing telling me it is a 3.03 BIOS version but only got the BIOS file name (68ET35WW);
Is it the same BIOS you used and if not how could I find the list of (token, default value,new seting) for that particular BIOS ?
Thanks a lot in advance for your help !
Regards

How can I tell what video card and how much video memory does my iMac have?

How or where can I find out: which video card does my iMac have and how much video memory does it have? I've tried looking in System profiler, but I did not see it there. Thank you.

Once you open System Profiler there should be a line called "memory" which is the RAM (vs. hard drive size which is not what is called memory), e.g., Memory: 1.5 GB
For video click on the line Graphics/Displays and look at the chipset line, e.g., Chipset Model: GeForce2 TwinView
Kappy's instructions are handy for checking the original configuration of your computer, but that may have been changed at some time, especially if you bought it secondhand.

Jdev11g CPU profile and Memory Profile doesn't work for Mac

I'm running Jdev11g on Mac OSX 10.5.5,
CPU Profile and Memory Profile doesn't work. I got following message:
Error occurred during initialization of VM
Could not find agent library in absolute path: /Shared/jdevjavabase11110/jdeveloper/jdev/lib/profiler16.so
The file actually is there. I don't understand why they looking for .so file, it supposed to be mapped as .jnilib on Mac.
This is broken on TP4 as well.

I'm still seeing this issue. Here is what I get:
/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java -client "-agentpath:/Users/kamleshnanda/Downloads/jdeveloper/jdev/lib/profiler16.so=port=60950,jarpath=/Users/kamleshnanda/Downloads/jdeveloper/jdev/lib/profiler-agent.jar,enable=t,depth=1000,startup=connect,time" -classpath /Users/kamleshnanda/jdeveloper/mywork/MyJavaApplication/Project1/classes project1.Class1 Hello
Error occurred during initialization of VM
Could not find agent library in absolute path: /Users/kamleshnanda/Downloads/jdeveloper/jdev/lib/profiler16.so
Process exited with exit code 1.
I'm using the following build:
About
Oracle JDeveloper 11g Release 1 11.1.1.2.0
Java Edition Version 11.1.1.2.0
Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
Copyright © 1997, 2009 Oracle and/or its affiliates. All rights reserved.
IDE Version: 11.1.1.2.36.55.36
Product ID: oracle.jdeveloper
Product Version: 11.1.1.2.36.55.36
Version
Component     Version
=========     =======
CVS Version (External)     (CVS) 1.12.13 (client/server)
Java(TM) Platform     1.6.0_17
Oracle IDE     11.1.1.2.36.55.36
PMD     JDeveloper Extension 4.2.5.3.0
Team Productivity Center     11.1.1.2.36.55.36
Versioning Support     11.1.1.2.36.55.36
Here are the JVM properties:
java.runtime.name     Java(TM) SE Runtime Environment
java.runtime.version     1.6.0_17-b04-248-10M3025
java.specification.name     Java Platform API Specification
java.specification.vendor     Sun Microsystems Inc.
java.specification.version     1.6
java.vendor     Apple Inc.
java.vendor.url     http://www.apple.com/
java.vendor.url.bug     http://bugreport.apple.com/
java.version     1.6.0_17
java.vm.info     mixed mode
java.vm.name     Java HotSpot(TM) 64-Bit Server VM
java.vm.specification.name     Java Virtual Machine Specification
java.vm.specification.vendor     Sun Microsystems Inc.
java.vm.specification.version     1.0
java.vm.vendor     Apple Inc.
java.vm.version     14.3-b01-101
Here is the OS information:
os.arch     x86_64
os.name     Mac OS X
os.version     10.6.2

The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.

The new Sony DSC-RX10 Lens Profile does not appear in the Enable Lens Profile Develop Module.
The wrong lens F3.5/6.3 profile is checkmarked and I can not find the new RX10 Sony 70-200 F2.8 G SMM11 profile. The meta data in the Library module correctly list the Sony RX10 and the Correct lens.
How may I select the correct lens profile for my Sony DSC-RX10?

Ask in the PS/ LR/ ACR forums
Mylenium

How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.

How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.
for this responsibility i need to have teh sets enabled. how to do teh same.
similar to OM ADMIN as shown below:
Kindly advice on teh steps. i believe its some menu /function inclusion can you pl share teh pointer.
regards,
bala

AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

How to enable Memory profiling?

Similar Messages

Maybe you are looking for