How to encode multiple camera views and display them separately on the same page
Does any one know if this is possible with just one
encoder/streaming server or would you need multiple encoders to
send separate views?
Hello after a long time.
I have 2 the same capture card. And I am trying to stream to 2 diffrent rtmp server. I start first one and no problem. But when I run second FME instance and select second stream card, first one turns to black and second one shows up. When I close second, first one again comes back.
What shoul I do for streaming multiple streams form multiple stream cards?
Best regards.
Similar Messages
-
How do you open multiple binary files and plot them all on the same graph?
I have three different binary files and I want to plot all 3 of them onto a graph.
I am familiar with opening and reading a single binary file. (Thanks to the help examples!)
But to do multiple numbers at the same time? I was thinking of putting 3 different 'reading from binary file' blocks with the rest of the 'prompts', 'data type', etc.. and then connecting them on the same wire.
However, I got into a mess already when I tried to read one .bin file to dynamic data type --> spectral measurements --> graph waveform. The error was Not enough memory to complete this operation... Why is that? That didnt happen in the help example "Read Binary File.vi"... Has it got something to do with the dynamic data type?
Thank you for your time.
Jud~Have a look at the image below and attached VI. Simply enter the different paths into the PathArray control.
R
Message Edited by JoeLabView on 07-30-2008 09:59 PM
Attachments:
multipleBinary2Graph.vi 18 KB
multipleBinary.PNG 5 KB -
How to add new data entry and display old data in the same screen in SM30?
Hi, Experts:
We need to use SM30 to maintain a table entry. When I click the button of "New Entries", the table screen becomes blank. I can only add new data but not be able to see the old data existing in the table.
How can I have the new line available for me to add new data at the same time see the data currently existing in the table?
Thanks,
JennyHi, thanks for the reply!
Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
Thanks,
Jenny -
I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open? Next in Elements 11, how do I load and print different pictures and different sizes options on the same page?
Thanks,
Shirsbmgrams wrote:
I have many photos with file extension of .PDD and that Photo Deluxe 4 no longer will operate in Win 7. How can I open?
See here:
Reading PhotoDeluxe PDD Files -
How can I listen to itunes and play a game at the same time on my ipad 4?
How can I listen to itunes and play a game at the same time on my ipad 4? This means I need to run 2 apps at the same time itunes and my game. The game has its own sound control so I can turn off its sound while i listen to itunes tracks. But I don't know how to set it up so the ipad does both.
Anytime you open an app that has a persistant sound stream - a movie, a podcast, some games - it will overide the music app's stream. nothiong you can do to change it.
-
How can you listen to music and play a game at the same time?
How can you listen to music and play a game at the same time?
I am playing music, by starting the Crash Baandicoot Nitro Kart 3D game it shuts off the music playing. Is there a way around this?
It seems like this should be possible.
Message was edited by: RuthlessVengeance
Message was edited by: RuthlessVengeanceSelect the music play list you want to listen to and start it playing. Go back to the home screen and start the app you want to use, music will stop. Press the home button two time quickly and it will bring up a simple control for controling the music. This works for me with all of the apps I have purchased including games. Just a note you can pull up the same music control if the iPod is a sleep and locked by pressing the button three times quickly.
Mike -
Help!!! How to make quicktime plugin do not display on top of the web page?
Any one knows how to make quicktime plugin do not display on top of the web page??? I've tried to change the zIndex property using javascript, but it doesn't work.
Because we have some widgets which are required to be moved to anywhere on the page, we use iframe to implement that, so it can display on top of quicktime plugin, but the plugin flickers sometimes when we do some operation on the widget which is on top of it.
Anyone can helps me? Thanks in advance!!!
Windows XP Pro> Can you tell me how to set the script so that the
lightbox image is
> displayed
> on mouseover instead of mouse click.
Check the docs. Trent is usually very thorough in his
instructions.
Hint: I haven't studied it but it probably involves modifying
one of DW's
built-in Behaviors.
Walt
"ducati1" <[email protected]> wrote in
message
news:gkb906$qrd$[email protected]..
> Wow that DW extension is just what I needed.
> Thanks..
> Can you tell me how to set the script so that the
lightbox image is
> displayed
> on mouseover instead of mouse click.
> I currently have the thumbnails set to insert the ALT
text into a text box
> on
> mouse click.
> -
Display an iview in the same page.
Hi Experts,
I need to integrate webdynpro application which is a tree application
when i integrate that application if i click on that some search button it should navigate to other iview but the present application should be in the same page and the new application should be opened... how can we make it....
plz help me in this ,.........
waiting for u r responses...
Regards,
ShilpaShilpa,
If it is the 1st one (pop Up) then you can use Koti's threads.
also check this library files to do this, if it is a external window I think this suits your requirement very well
http://help.sap.com/saphelp_nw2004s/helpdata/en/fd/024640c0e56913e10000000a1550b0/content.htm
Open view in external window..
Open views in non-modal external windows - the patch version
PraDeep
Edited by: pradeep bondla on Jul 18, 2008 7:14 AM -
Display search results on the same page
I have a text box with a submit button to the left. Once the user enter the a number in the search field my select query executes.
My question is how can i display the reult on the same page? I have been able to display results on the same page but my table headers are also displayed at the same time while user is trying to enter the item number.
i tried using <c:if> but its not wokring, Any help?
<%@ include file="/WEB-INF/jsp/include.jsp" %>
<html>
<head>
<title>VDP QOH UPDATE</title>
</head>
<body>
<spring:bind path="quantityOnHand">
<FONT color="red">
<B><c:out value="${status.errorMessage}"/></B>
</FONT>
</spring:bind>
<P>
<FORM name="quantityOnHandForm" method="POST" action = ''>
<CENTER>
<table BORDER=0 CELLSPACING=0 CELLPADDING=5 WIDTH=600>
<tr>
<td COLSPAN=2 BGCOLOR="#003366"><P ALIGN=CENTER><B><FONT COLOR="#FFFFFF" SIZE="2" FACE="Arial,Helvetica,Univers,Zurich BT">Query</FONT></B>
</td>
</tr>
<tr>
<td WIDTH=215 BGCOLOR="#336699"><P ALIGN=RIGHT>
<B>
<FONT COLOR="#FFFFFF" SIZE="-1" FACE="Arial,Helvetica,Univers,Zurich BT">
Item No:
</FONT>
</B>
</td>
<td ALIGN=LEFT><spring:bind path="quantityOnHand.itemNumber">
<input type="text" maxlength="30" size="10" name='<c:out value="${status.expression}"/>' value='<c:out value="${status.
value}"/>'>
<td><font color="red"><c:out value="${status.errorMessage}" /></font> </td>
</spring:bind>
</td>
</tr>
<tr>
<td BGCOLOR="#336699" WIDTH=215> </td>
<td>
<input type="submit" name="Submit" value="Submit" >
</td>
</tr>
</table>
</center>
</form>This is basically all of my search jsp code. Now i've added my other code after </form> to display the results.
</form>
<table BORDER=0 CELLSPACING=0 CELLPADDING=5 WIDTH=600>
<tr>
<td COLSPAN=2 BGCOLOR="#003366"><P ALIGN=CENTER><B><FONT COLOR="#FFFFFF" SIZE="2" FACE="Arial,Helvetica,Univers,Zurich BT">Quantity On Hand Search Results</FONT></B>
</td>
</tr>
</table>
<c:choose>
<c:when test="${empty qohInfo}">
<div align="left" style="color:#336699;"><b>No records Found.<br><br></b></div>
</c:when>
<c:otherwise>
<table width="602" height="92">
<tr>
<th ALIGN=CENTER BGCOLOR="#336699" width="110" >
<B>
<FONT COLOR="#FFFFFF" SIZE="-1" FACE="Arial,Helvetica,Univers,Zurich BT">Item Number</FONT>
</B>
</th>
<th ALIGN=CENTER BGCOLOR="#336699" width="115">
<B>
<FONT COLOR="#FFFFFF" SIZE="-1" FACE="Arial,Helvetica,Univers,Zurich BT">Vendor Id </FONT>
</B>
</th>
<th ALIGN=CENTER BGCOLOR="#336699" width="120">
<B>
<FONT COLOR="#FFFFFF" SIZE="-1" FACE="Arial,Helvetica,Univers,Zurich BT"> Inventory Date</FONT>
</B>
</th>
<th ALIGN=CENTER BGCOLOR="#336699" width="130" >
<B>
<FONT COLOR="#FFFFFF" SIZE="-1" FACE="Arial,Helvetica,Univers,Zurich BT">Update Date Time </FONT>
</B>
</th>
<th ALIGN=CENTER BGCOLOR="#336699" width="100" >
<B>
<FONT COLOR="#FFFFFF" SIZE="-1" FACE="Arial,Helvetica,Univers,Zurich BT">Quantity</FONT>
</B>
</th>
</tr>
<c:forEach var="qohInfo" items="${qohInfo}" varStatus="loop">
<tr BGCOLOR="#99CCFF">
<TD align="center"><c:out value="${qohInfo.itemNumber}"/></TD>
<TD align="center"><c:out value="${qohInfo.vendorId}"/></TD>
<TD align="center"><c:out value="${qohInfo.inventoryDate}"/></TD>
<TD align="center"><c:out value="${qohInfo.updateDateTime}"/></TD>
<TD align="center"><c:out value="${qohInfo.quantity}"/></TD>
</TR>
</c:forEach>
</table>
</c:otherwise>
</c:choose>As you can see that the table headers are always shown but i would like to hide the table headers and everything until and unles user clicks on submit button. Any help is appreciated.Thanks balusc for your reply. I was curious how would you have used the c:if statement to display the table and hide the table if a user have not clicked the button.
I wanted to stay away from javasscript -
How to cause a button to compute a text field on the same page?
I have a button called "Generate Hash" and I want to have it compute a text field and display it on the same page with the results of a simple sql query:
select 'P'||substr(Sys_guid(),1,10) from dual;
Is this a difficult thing to do?Hello Patrick,
Nope - not hard at all. Create a Process on your page that says:
:Pxxx_HASH_VALUE := 'P'||substr(Sys_guid(),1,10);
Then in the Condition portion of the Process, Set the section labeled "When Button Pressed (Process After Submit When this Button is Pressed)" equal to the button you wish to use for the compute.
Don -
Displaying database results on the same page
I am relatively new to dynamic pages and have only just
recently created a PHP SQL setup using Dreamweaver CS3. I have no
issues in displaying items from a recordset on a page. I have even
used the "Master detail page set" function in CS3 to have a small
selection of records from my recordset on the page as reference
points to then open up a detail web page showing all the records
for that item. But this is not what I want to do.
I have used CSS to created a two columm page, which I have
then saved as a template (left sidebar and then main content on the
right). The scenario is that the database has membership details. I
want to be able to have the membership numbers displayed in the
left sidebar, with the main content of the database record for that
member displayed in the main section of the page. If I click on a
different membership number in the left column I want the main
content to change and display the records for that member.
I guess what I am trying to say is I want the "Master detail
page set" functionality but rather than opening a seperate web page
for the detail, I want it displayed on the same page.
As I said, I am new to dynamic pages. A way I thought of it
being done was to use frames but I don't really want to do that as
it means making up a whole new set of templates. Is there a simple
way of doing this?
Thanks in advance
JJhttp://java.sun.com/j2ee/1.4/docs/tutorial/doc/
http://java.sun.com/docs/books/tutorial/javabeans/index.html
http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/Servlets.html
http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPIntro.html
http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPBeans.html
http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPTags.html
http://java.sun.com/j2ee/tutorial/1_3-fcs/
http://java.sun.com/developer/onlineTraining/index.html
http://java.sun.com/docs/books/tutorial/index.html
http://developers.sun.com/events/techdays/codecamps/index.html -
How is when a button pressed a report will come to the same page !!!
Hi all,
I wonder that is it possible to bring a report to the page as a region but only when a button pressed in apex .When ı clicked the go button for example ı want to list a report in the same page.
but I dont know how .If is this possible can you explain me please.I need help!
Thanks!Create your report in a region as normal.
Create a second region and in this region create an item eg p171_item.
In the same region create 2 buttons
Get Report and Reset (branching back to same page).
Create 2 page processes (PLSQL) on submit after computations
1. GET REPORT
DECLARE
v_item number;
Begin
select 1 into v_item from dual;
:P171_ITEM := v_item;
end;
2.RESET
DECLARE
v_item number;
Begin
select 2 into v_item from dual;
:P171_ITEM := v_item;
end;
Tie the processes to the buttons.
On your report region put a condition
PL_SQL RETURNING BOOLEAN
IF :P171_ITEM = 1 THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;
Now by pressing the buttons the report region is opened and closed.
Now hide P171_ITEM.
Gus -
Displaying error messages on the same page
Hi All !
I'm developing a web application using JSP.I want to know how to validate any entry in a Textbox.I want to prompt the error on the same page where that corresponding textbox is. I'm a newcomer to the world of JSP and wouldn't understand a esoteric Servlet/errorpage language,so I request you all to explain your answer.
Also,I'm writing that JSP-Oracle database connection string(all that conn,stmt,try,finally etc.) on every JSP page and this amounts to a very big code.Can somebody enlighten me on optimising this.For instance,a class or program which can be called everytime I wanna make a connection to database.One more problem is that I wouldn't know where to write a class or that program and how to call it.So ,I'm sorry,but if you are replying you have to help me out with this problem also.
Too much to ask,I guess!!
Will highly appreciate a reply.http://java.sun.com/j2ee/1.4/docs/tutorial/doc/
http://java.sun.com/docs/books/tutorial/javabeans/index.html
http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/Servlets.html
http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPIntro.html
http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPBeans.html
http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/JSPTags.html
http://java.sun.com/j2ee/tutorial/1_3-fcs/
http://java.sun.com/developer/onlineTraining/index.html
http://java.sun.com/docs/books/tutorial/index.html
http://developers.sun.com/events/techdays/codecamps/index.html -
Display regions dynamically on the same page
Hi
I have 2 regions.Top is an interactive editable report.Bottom region is a read only report of the same(top region)
But when i click search button(based on paramters 1&2, i am not able to see the same number of rows.
Top region shows 5..But bottom region shows not the same.
Is there any custom process i need to add ?
Please advice
thank
kp>
http://localhost
----------^^^^^^^^^
uhhh....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"namtax" <[email protected]> wrote in
message
news:ej54sr$m7q$[email protected]..
> im trying to code my tree menu so that when you click on
the album name
> the
> song names would display dynamically on the same page..
>
> Heres my page at the moment
>
>
http://localhost/music_explained/forta_explained/blah_7.cfm
>
> I have added a href field to the album section of the
cftree, so that when
> you
> click on that a question mark appears after the URL.
> I have set up a query that selects song names dependant
to the record
> which is
> clicked on the cftree...but i am having
difficulties...anyone know of a
> tutorial or anything on this particular topic.
>
> Cheers
> -
How to place event callback components and "main-VI" components in the same Front Panel?
What I'm trying to accomplish:
Place a .NET component, which generates events, and other standard LabVIEW components in the same Front Panel. The standard LabVIEW components should be updated when events are being generated in the .NET component.
How I tried to solve it:
Problem:
The event callback code must reside in a separate event callback VI. In order to "pass the event up" to the main VI I tried to use a global variable. The interrupt does occur:
but I was hoping that the string indicator would be updated when the event occurred, but it wasn't.
Questions:
What's the best way to solve what I try to accomplish? If I want to solve the problem on the picture above, how would I do it (it may not be the best solution, but I'm still curious what's wrong)? Please feel free to be over-explicit when replying as I am novice LabVIEW programmer. Thanks in advance for any help.There are two bundle functions for creating clusters. The function simply called Bundle operates almost exactly like the Build Array function I showed. The type of the output cluster depends on whatever you wire in as inputs. You don't have to supply a specific type parameter.
The function called Bundle by Name takes in a specific type of cluster in the top input and allows you to fill in the values of that specific type of cluster. To create the specific type of cluster you want, you need to create a cluster of string references. Here's how to do that:
Go to the Front panel and drop down an empty cluster shell.
Go to the Refnum palette and drop down a Generic Control Refnum. Now here's a cool trick to turn that generic refnum into a string-specific refnum (a so-called strictly-typed refnum). Grab a string from the controls palette and drag it into the Generic Control Refnum. Once you drop it, you'll see the refnum change its icon to display a string picture.
Make copies of this string refnum (as many as you need) and add it to the cluster shell.
Now, if you're making specific types of clusters to work with, now is the absolute best time to learn about typedefs if you haven't already. It will save you hours and hours (if not days) of development time in the future. Trust me!
Jarrod S.
National Instruments
Maybe you are looking for
-
How to connect HSQLDB database in jar
Hi people, How can i to connect hsqldb database in jar file without getResource() method ? thanks
-
Can anyone explain this error??
This program splits an int array to two arrays: one containing only even numbers, and the other only odd numbers. The two arrays are returned by the split method as array of two arrays, with the first containing only the even numbers and the second c
-
Code to translate xml data into html using jaxp ?
Hi all !! Could you please send me code to translate xml data into html using jaxp i am sending my xml file and xsl file its urgent my xml file is : <?xml version="1.0" encoding="UTF-8"?> <?xml-stylesheet type="text/xsl" href="scenario.xsl"?> <scenar
-
Hi i have transported a work book from one system to an other system. i am getting this error workbook storage fault 1100, can some body help me why is that,,should i need to re transport using Bex transport or what. thanks
-
Hello all, I've a report program, the output of whch is an internal table with a single field type c. (elementary internal table). I've schedule the program to run at a specific time in background. Now, whenever the program executes, I want a workflo