How to enforce generating process of HL7

Hi,
HL7 messages sent by SAP are obviously generated from some kind of table which contain the neccessary data. Generating theses messages is done immediately, but after a certain time. Is there a way to force IS-H to generate the messages and to wait until next scheduled run??
Thanks for your help
Torsten

Hi Torsten,
with each and every change of master data, an event is triggered. As you pointed out correctly, this event is stored in a database table. Scheduling of an appropriate report leads to the evaluation of the relevant table. The events are collected and, according to the events, enterprises service calls are triggered. Finally, they will be mapped to the HL7 messages that can be received by the connected system.
Best Regards, Doris

Similar Messages

  • How to do parallel processing with dynamic internal table

    Hi All,
    I need to implement parallel processing that involves dynamically created internal tables. I tried doing so using RFC function modules (using starting new task and other such methods) but didn't get success this requires RFC enabled function modules and at the same time RFC enabled function modules do not allow generic data type (STANDARD TABLE) which is needed for passing dynamic internal tables. My exact requirement is as follows:
    1. I've large chunk of data in two internal tables, one of them is formed dynamically and hence it's structure is not known at the time of coding.
    2. This data has to be processed together to generate another internal table, whose structure is pre-defined. But this data processing is taking very long time as the number of records are close to a million.
    3. I need to divide the dynamic internal table into (say) 1000 records each and pass to a function module and submit it to run in another task. Many such tasks will be executed in parallel.
    4. The function module running in parallel can insert the processed data into a database table and the main program can access it from there.
    Unfortunately, due to the limitation of not allowing generic data types in RFC, I'm unable to do this. Does anyone has any idea how to implement parallel processing using dynamic internal tables in these type of conditions.
    Any help will be highly appreciated.
    Thanks and regards,
    Ashin

    try the below code...
      DATA: w_subrc TYPE sy-subrc.
      DATA: w_infty(5) TYPE  c.
      data: w_string type string.
      FIELD-SYMBOLS: <f1> TYPE table.
      FIELD-SYMBOLS: <f1_wa> TYPE ANY.
      DATA: ref_tab TYPE REF TO data.
      CONCATENATE 'P' infty INTO w_infty.
      CREATE DATA ref_tab TYPE STANDARD TABLE OF (w_infty).
      ASSIGN ref_tab->* TO <f1>.
    * Create dynamic work area
      CREATE DATA ref_tab TYPE (w_infty).
      ASSIGN ref_tab->* TO <f1_wa>.
      IF begda IS INITIAL.
        begda = '18000101'.
      ENDIF.
      IF endda IS INITIAL.
        endda = '99991231'.
      ENDIF.
      CALL FUNCTION 'HR_READ_INFOTYPE'
        EXPORTING
          pernr           = pernr
          infty           = infty
          begda           = '18000101'
          endda           = '99991231'
        IMPORTING
          subrc           = w_subrc
        TABLES
          infty_tab       = <f1>
        EXCEPTIONS
          infty_not_found = 1
          OTHERS          = 2.
      IF sy-subrc <> 0.
        subrc = w_subrc.
      ELSE.
      ENDIF.

  • How do I generate a Word document and a PDF from Help files?

    Hi,
    I am new to RoboHelp HTML, and am using version 8.  I updated some Help files, and now I want to generate output.  Here are my questions/ or the process I used:
    To compile the help, I clicked Generate Primary Layout.  Is this correct?  I noticed that the date stamp on the xpj file has not changed.  The date is still from many months ago.  (Why is that?  Should it show a recent update date?)  However, the files that I updated do reflect the dates when I made the updates.  These include art files, an hhp, and htm, js, ldb, pss, cpd files.
    To generate a pdf, I clicked Generate PDF.  I was not able to generate the PDF at first, but then, I enabled macros in Word 2007 (Trust Center Settings > Enable all macros...and clicked the checkbox, Trust access to the VBA project object model), and clicked Generate PDF.  At the end of the generation, I got this error in Word: Microsoft Office Word has encountered a problem and needs to close.  We are sorry for the inconvenience.  The info you were working on might be lost.  Word can try to recover it for you.  I closed the dialog and Word generated several blank documents.  Microsoft Office Diagnostics was run and found one problem and corrected it.  Despite the error message, a pdf was generated.  (If you could give me any insight on why I got the error messages, that could be helpful to know).
    How do I generate a Word document?
    Thank you!
    Erin

    Welcome to our community
    Note that RoboHelp is capable of creating a variety of layouts. WebHelp, FlashHelp, AIR Help, Microsoft HTML Help, JavaHelp, Oracle Help, ePub and more.
    Any of these layouts may be nominated as the Primary layout. So when you generate the Primary layout, you get whatever has been configured as the Primary layout.
    Only certain actions will result in a change to the .XPJ file. The actions are indicative of major changes to the project. So I wouldn't fret the fact that the date time stamp wasn't updated.
    Indeed the Printed Documentation Single Source Layout recipe is what you use to create PDF. Generally what happens is that RoboHelp creates a Microsoft Word document as an intermediate file type, then creates the PDF from that. As you might imagine, there are a host of things that can go wrong during the process. I might suggest that you first get a Word document to generate cleanly. Then once you do that, focus on PDF. I know that I typically gen a Word document and stop there. I just open Word and use Word to create the PDF.
    If you look at the properties for the Printed Documentation Single Source Layout recipe (View > Pods > Single Source Layouts then right-click the Printed Documentation layout and choose Properties) you will see that PDF, Word or both are options at the top of the dialog.
    Hopefully that gives you a nudge in the right direction.
    My fellow Adobe Community Expert Peter Grainge has excellent info on Printed Documentation on his site at Grainge.org. Click the link below for that.
    Click here to visit Peter's site
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcererStone Blog
    RoboHelp eBooks

  • How to configure quality process with batch management.

    Dear Friends,
                we have a scenario,our client receive goods with 101movement type  into quality inspection stock.
    once stock is passed quality check stock,then we will take into unrestricted stock with 321 movement type.
    failed in quality test will  be rejected.please give me suggestion how to map the scenario.while i am testing
    the process in my sandbox,its asking batch number.its not allowing me to post unrestricted stock with 321
    movement type.how to make batch as optional in this scenario?if batch is mainted for the material,how to
    configure the process.we are not using QM module.
    please suggest me.
    Regards,
    Varun

    In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
    if batch creation is set to manual, enter a manual batch no & proceed.
    But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
    Hope this helps.
    Regards
    Mithun

  • How can we generate result set report?

    how can we generate result set report ?means the out put of one query be the input of another query?how it is?

    Hi
    You have to use APD ( analysis process designer) to use results of one query as the input for the other queries.
    Check this link
    http://help.sap.com/saphelp_nw70/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
    Regards

  • How to display list process, when i run sql*loader in c#

    Hello,
    How to display list process, when i run sql*loader in c#. I mean when i run sql*loader from cmd windows, i get list process how many row has been inserted. But when i run SQL*Loader from C#, i can't get process SQL*Loader.
    This is my code:
    string strCmd, strSQLLoader;
    string strLoaderFile = "XLLOAD.CTL";
    string strLogFile = "XLLOAD_LOG.LOG";
    string strCSVPath = @"E:\APT\WorkingFolder\WorkingFolder\sqlloader\sqlloader\bin\Debug\8testskrip_HTTP.csv";
    string options = "OPTIONS (SKIP=1, DIRECT=TRUE, ROWS=1000000,BINDSIZE=512000)";
    string append = "APPEND INTO TABLE XL_XDR FIELDS TERMINATED BY ','";
    string table = "OPTIONALLY ENCLOSED BY '\"' TRAILING NULLCOLS (xdr_id,xdr_type,session_start_time,session_end_time,session_last_update_time,session_flag,version,connection_row_count,error_code,method,host_len,host,url_len,url,connection_start_time,connection_last_update_time,connection_flag,connection_id,total_event_count,tunnel_pair_id,responsiveness_type,client_port,payload_type,virtual_type,vid_client,vid_server,client_addr,server_addr,client_tunnel_addr,server_tunnel_addr,error_code_2,ipid,c2s_pkts,c2s_octets,s2c_pkts,s2c_octets,num_succ_trans,connect_time,total_resp,timeouts,retries,rai,tcp_syns,tcp_syn_acks,tcp_syn_resets,tcp_syn_fins,event_type,flags,time_stamp,event_id,event_code)";
    strCmd = "sqlldr xl/secreat@o11g control=" + strLoaderFile + " LOG=" + strLogFile;
    System.IO.DirectoryInfo di;
    try
    System.Diagnostics.ProcessStartInfo cmdProcessInfo = new System.Diagnostics.ProcessStartInfo("cmd.exe");
    di = new DirectoryInfo(strCSVPath);
    strSQLLoader = "";
    strSQLLoader += "LOAD DATA INFILE '" + strCSVPath.ToString().Trim() + "' " + append + " " + table;
    StreamWriter writer = new StreamWriter(strLoaderFile);
    writer.WriteLine(strSQLLoader);
    writer.Flush();
    writer.Close();
    // Redirect both streams so we can write/read them.
    cmdProcessInfo.RedirectStandardInput = true;
    cmdProcessInfo.RedirectStandardOutput = true;
    cmdProcessInfo.UseShellExecute = false;
    cmdProcessInfo.LoadUserProfile = true;
    //System.Diagnostics.Process.Start("CMD.exe", strCmdLine);
    // Start the procses.
    System.Diagnostics.Process pro = System.Diagnostics.Process.Start(cmdProcessInfo);
    // Issue the dir command.
    pro.StandardInput.WriteLine(strCmd);
    // Exit the application.
    pro.StandardInput.WriteLine("exit");
    //Process[] processlist = Process.GetProcesses();
    //foreach(Process pro in processlist){
    Console.WriteLine("Process: {0} ID: {1}", pro.ProcessName, pro.Id);
    Console.WriteLine(pro.StandardOutput.ReadLine());
    // Read all the output generated from it.
    string strOutput;
    strOutput = pro.StandardOutput.ReadToEnd();
    pro.Dispose();
    catch (Exception ex)
    return;
    finally
    Thanks.

    friend
    sqlldr is an application residing in the OS. procedure runs in the dbms engine.
    you cannot run an os command directly from a procedure or a function or a package .
    If you want to do so you need to use either a daemon process created by a PRO*C program
    or a JAVA stored procedure to do so.
    just refer to previous question forums, you can find the solution. Somebody has already given a solution using
    java to run an OS command . check it out
    prakash
    [email protected]

  • How to enforce the message "Do you want to save changes?"

    Hello,
    How to enforce the message "Do you want to save changes?" when the user attempts to close a form after checking a non-database item (check-box).
    All the other database items in the block are not updateable and only viewable.
    After checking the non database item check-box, if the user tries to commit, then the system is saving the changes and call the appropriate procedure on save.
    But if the user tries to close the window without committing, the form is not showing the message "Do you want to save changes?" since the check-box is a non database item.
    How to enforce the message "Do you want to save changes?" in this scenario when the user tries to close the window?
    Thanks in advance.
    Cheers
    Sri

    This is a fairly common question in the forum. You will need to override the default exit form process and check to see if the checkbox is checked. You can do this in the Key-Exit trigger. For Example:
    DECLARE
      al_id     ALERT;
      al_button  NUMBER;
    BEGIN
      IF ( CHECKBOX_CHECKED('YOUR_BLOCK.CHECKBOX_ITEM') ) THEN
         /* Display an Alert here that asks, "Do you want to save changes?" */
         ...code here to set the properties of your alert...
         al_button := Show_Alert(al_id);
         IF ( al_button = ALERT_BUTTON1 ) THEN
            --YES
            /* Perform COMMIT Processing here...*/
         ELSIF ( al_button = ALERT_BUTTON2 ) THEN
            --No
            Exit_Form(NO_VALIDATE);
         ELSE
            --Cancel
            RAISE Form_Trigger_Failure;
         END IF;
      ELSE
         Exit_Form;
      END IF;
    END;If you need more help with the Alert, please check out the SHOW_ALERT topic in the Forms Help.
    BTW, what happens if all the user does is check the checkbox? No other changes have occured. What changes are you trying to process?
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • How to schedule the process chain fr the report

    hai experts,
    i have a query which i need to generate for every five hours? i know that we can generate the report thr process chain but i dont know how to build that..
    my question is how to schedule the report,how to build the process chain,....
    can any one plz tell me how to start this generating report for every five hours
    thanks in advance..points will be alloted surely ,i need this urgently..
    Suri

    First of all you need to Identify the InfoObjects if you want to take up Master Data Loads, and if you want take up transaction loads then select the Data Targets to which the data has to be updated. Then plan the dataflow accordingly.
    You want to create a Process Chain, Go to RSPC, and then select the create option and from the Process categories available on the left handside drag and drop the Start process, then define the Variant for the same. In the same way you need to identify the other Process Types available on the lefthand side. For Eg: Start Process>Load to ODS>Activation of ODS Data>Delete Indexes for the InfoCube>Load to InfoCube>Create Indexes>Delete Overlapping Req-->Agg. Rollup.
    This is how you need to specify the dataflow, several other Process Types also included based on the requirement For Eg: Sending Mail Alerts when the Job is Success or Terminated.
    Also, have a look at this links to make urself clear about the steps in creating Process Chain.
    http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
    Hope it helps.
    Regards,
    Archna

  • How to deactivate rebate processing

    Dear All,
    How to deactivate rebate processing.
    Thanks with Reagrds
    Subrat

    Thanks for the reply
    when i am going to save after deactivating the billing type and sales organization
    its not generating any transport request so that i can transport the configuration to PRD server.
    when i m saving it , it poping up with this message
    "Billing index had to be recreated
    because changes were made to
    rebate
    Do you want to create a new
    billing index for rebate?"
    after this Yes or No is coming
    if i am choosing yes one another screen is coming which is for new index generating.
    and after this also no transport request is genarating.
    please help.

  • How to configure returns process if ware house management is configured

    hi,,
    sap gurus,
    how to configure returns process if ware house management
    is configured.
    bcz total ware house management is configured but
    not with returns process
    plz help me on this.
    regards,
    balajit
    09990019711

    In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
    if batch creation is set to manual, enter a manual batch no & proceed.
    But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
    Hope this helps.
    Regards
    Mithun

  • How do you generate an executable in LabVIEW 8.6?

    How do you  generate an executable in LabVIEW 8.6?  A point to a web site would be helpful.
    Thanks in advance.

    In version 8.0 and above you must create a LV project first.  Once
    you have created a project you can right click on build specifications
    located at the bottom of the project window.  Select
    new>>application.  This will allow you to create the exe.  If you
    want to create an installer then you must follow the same process. 
    They are now separate. 
    To find more information goto
    the help menu in a LV window and select "search the LabVIEW help"  When
    the window pops up select the index tab and type the following:
    "building, applications (how-to)"  This should give you the information
    you need.
     Hope this helps.
    BJD1613
    Lead Test Tools Development Engineer
    Philips Respironics
    Certified LV Architect / Instructor

  • How to find the processing time of any query?

    im using oracle express edition, can anyone help me, how to find the processing time of any query?

    Trace the query and tkprof the generated trace file.
    http://download.oracle.com/docs/cd/E11882_01/server.112/e16638/sqltrace.htm#PFGRF01010

  • How to enforce unique primary key constraint in xsd

    Hi,
    I'm trying to enforce primary key constraint in xsd. I'm using the following xsd to generate the xmls .
    <?xml version="1.0" encoding="UTF-8"?>
    <!--<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
    elementFormDefault="qualified" attributeFormDefault=
    "unqualified">-->
    <xs:schema targetNamespace="http://TBD-URI" elementFormDefault="qualified"
    attributeFormDefault="unqualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">
          <xs:element name="Employees">
                <xs:annotation>
                      <xs:documentation>Contains All Employee information</xs:documentation>
                </xs:annotation>
                <xs:complexType>
                      <xs:sequence>
                            <xs:element name="Employee" maxOccurs="unbounded">
                                  <xs:complexType>
                                        <xs:sequence>
                                              <xs:element name="Empno" type="xs:int" />
                                              <xs:element name="Ename" type="xs:string" />
                                              <xs:element name="Sal" type="xs:float" />
                                              <xs:element name="Deptno" type="xs:int" />
                                        </xs:sequence>
                                  </xs:complexType>
                            </xs:element>
                      </xs:sequence>
                </xs:complexType>
                <xs:key name="PK_Employee_Empno">
                      <xs:selector xpath=".//Employee" />
                      <xs:field xpath="Empno" />
                </xs:key>
          </xs:element>
    </xs:schema>Here's the generated XML
    <?xml version="1.0" encoding="UTF-8"?>
    <Employees xmlns="http://TBD-URI"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://TBD-URI file:/C:/Documents%20and%20Settings/ctsuser/workspace/JAXB/src/test/resources/TEST.xsd">
        <Employee>
            <Empno>0</Empno>
            <Ename>Ename0</Ename>
            <Sal>0</Sal>
            <Deptno>0</Deptno>
        </Employee>
        <Employee>
            <Empno>0</Empno>
            <Ename>Ename1</Ename>
            <Sal>0</Sal>
            <Deptno>0</Deptno>
        </Employee>
    </Employees>The generated XML allow the same Empno on which the primary key constraint has been defined. I'll appreciate if someone can provide pointers on how to enforce this constraint so that it doesn't allow the same Empno to be repeated.
    Thanks

    Could you please append your solution?
    There is a chance that someone in the future may have a similar problem, and might find this entry. As the entry exists now, all they will find out is that you solved it -- which does not help them at all.

  • How to re-generate payment advice

    Hi Experts,
    We made payment through f-58, spool got deleted. Please advice how to re-generate payment advice/spool.
    Thanks,
    Ganesh

    Hi,
    Go to TCode F110 and enter the parameters Run Date and Identification ( of which you want to regenerate), click on printout and enter the job name and execute it.
    Next in SM 37 TCode select the job and click on spool , then check the spool and click on click on icon under type column, check the print preview and process it further. Please note you would need to delete the parameters entered in F110 after you are done with the processing to process the next job.
    Thanks

  • How to execute a process flow?

    I create a process flow that contains mappings, it generate an xml code
    I want to know how to execute a process flow an how to know it sucess or fails ?
    have you any idea?
    thank you

    Hi
    You can also use 3rd party tools or batch scripts there is a SQL script for executing any OWB executable (sqlplus_exec_template.sql in owb/rtp/sql) see the post here;
    http://blogs.oracle.com/warehousebuilder/2008/11/using_3rd_party_schedulers_with_owb_1.html
    Cheers
    David

Maybe you are looking for