How to enter Inline command in jdev10

I used to work on java using the console now I am trying to use jdev.
in console we say '$ java inline_command' how do we do this in jdev?
because when I run the program I dont see where I have to input.

Go into project properties->Run/Debug->Edit configuration
tools setting -> allow user input check box.
http://forums.oracle.com/forums/click.jspa?searchID=7478586&messageID=1295018

Similar Messages

How can i turn off the annoying voice that is there whenever you enter a command

How can I turn off the annoying voice that is there whenever you enter a command.

Settings > General > Accessibility > VoiceOver > Off

How can hide the command line of a t.code in the portal

Dear Experts.
I have the following doubt:
How can hide the Command Line of a Report that is called with a T.Code in the portal?
Attach Image:
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
When I created a service using the T.Code SICF for the T.Code , I can hide buttons and the filed command line using
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
With notes 1010519, "SAP GUI for HTML: Simplified Title Area Without Menu and OK Code" and 959417.
But the problem is that when I create the service in the T.Code SICF, I also have that create an Iview IAC in the portal.
The Question is : How can hide this fields and buttons if I want Publish the T.code using an Iview Transaction in the portal?
In this moment I have used the two options:
1 option) I created a service using the t.Code SICF for my Transaction and I also created an Iview IAC in the portal for call the service.
RESULT:
SAP Web Application Server
         500 Connection timed out
        Error: -5
       Version: 7000
       Component: ICM
       Date/Time: Sat Jun 12 20:26:39 2010
       Module: icxxthr_mt.c
       Line: 2698
       Server: xyxab...
Error Tag: {-}
Detail: Connection to partner timed out after 60s
2) created an Iview Transaction in the portal and call my transaction.
RESULT.
[Image T.Code|http://www.freeimagehosting.net/uploads/eab3b6a03c.jpg]
But not can hide the field Command Line and other buttons.
I think that the command :
~webgui_simple_toolbar
~singletransaction
~NOHEADEROKCODE
Only can be used if I create a service using the T.Code SICF .
Best Regards
Carmen.

Hi Carmen,
The bottom line is that this cannot be done for transaction iviews without modifying the standard webgui service in SICF, which is probably not a good idea (since it affects everyone using SAP GUI for HTML). (You could hack the appintegrator to add the ~webgui_simple_toolbar parameter to the transaction URL template in the portal, but again its not a recommended thing to do ...). Better to create an IAC service in SICF with ~webgui=1 where you set the required appearance using an appropriate value for ~webgui_simple_toolbar, and then create an IAC iview to point at this service.
You can even override the ~transaction value configured in the new service in individual IAC iviews by entering the appropriate value in the application parameter of the iview, for example:
~okcode=/nSU01
And you can pass parameters in the same way:
~okcode=/nSU01 USR02-BNAME=xyz;USREFUS-USERALIAS=abc;
By the way, it would not be recommended to create a URL iview to access an IAC, since you are likely to encounter session management issues in this scenario - better to use an IAC iview.
Regards, Rory

How to delete a command in Terminal?

Months ago I tried to sync ical via Dropbox, which required entering a command in Terminal. Now I'd like to reverse the action. How do I go about deleting or countermanding this command? Thanks.

Based on the symlink you created long ago, your calendar directory is currently stored in Dropbox. If you want to keep your calendar data you will need to move it back to ~/Library/Calendars.
To be on the safe side use the ls command to see which is the symlink and which is the real directory:
ls -ld ~/Library/Calendars ~/Dropbox/Calendars
The one that starts with L and contains 2 file paths as in
lrwxr-xr-x 1 username group 9 Dec 4 2011 /Users/username/Library/Calendars -> /Users/username/Dropbox/Calendars
is the symbolic link
The one that starts with D is the real calendars directory, for example:
drwxr-xr-x 1 username group 9 Dec 4 2011 /Users/username/Dropbox/Calendars
NOTE: I strongly suggest you have a current backup before you use the 'rm' command below. One mistake with 'rm' (remove, aka delete) and you can loose data that you are not going to get back.
To remove the symlink, and put your calendar data back where iCal expects to find it, use the following commands:
rm ~/Library/Calendars
mv ~/Dropbox/Calendars ~/Library/
The rm command is removing the symlink you created.
The mv command is moving your calendars information to ~/Library where iCal expects to find it.

How to Clean the Command History in SAP Logon Screen

Hi
Can any one let me know on how to clean the Command History (Where we generally enter the T Codes) in SAP Logon Screen.
I dont want to List/see all the Previous command Hits in drop down box.
Thanks
Dan

Hi Eric and Markus,
We found the Solution and off course we did good R & D, Finally I am able to implement the fix to Clear the Command Line History.
All I did is I Disabled the Permissions for Code Folder (Right Click > Permissions > Deny) in Regedit.
Thats It, The Commands stopped storing in the History.
Thank you Erick and Markus.
Rg
Dan

How to run CLIX command?

Hi! I know the syntax of writing a CLIX command (from Console Manager Guide). However, I do not know how can I execute the CLIX command. I have installed the application but it does not seem to call up any application or windows where I can enter the command. Can someone please clarify how are CLIX commands being executed?
Cheers!
SF

Hi SF,
Steps necessary before starting with CLIX:
Before using CLIX, check the version of the MDM server and find out the compatible version of MDM CLIX and install it.
For executing CLIX commands; open command prompt and go to the folder where CLIX is installed.*
Now type CLIX; just to validate that correct patch is installed.
For more details, Please refer below link:
http://wiki.sdn.sap.com/wiki/display/SAPMDM/GettingStartedwithMDMCLIX
Regards,
Mandeep Saini

HT1414 How to enter passcode with voiceover

How to enter passcode with voiceover?

Have you tried to enter the passocde this way?
When you see the password entry keys, tap each key once to select it, then double tap the key to enter it. So if I had a passcode of 1234 I would:
tap 1, pause, double tap 1 (see the entry field get filled)
tap 2, pause, double tap 2
etc.
It should work the same way for a full password, only more tedious.
There is another possibility worth trying first. Triple tap the
Home
button. If you have Accessibility set up this way you should get a popup that will let you turn Voice Over off.
I copied the text from this forum.
http://www.ipadforums.net/new-member-introductions-site-assistance/60272-how-tur n-off-voice-over-command-while-password-lock-mode.html

How java runs in command prompt and why java runs on it

how java runs in command prompt and why java runs on it

command prompt was used before the development of IDEs like RAD,eclipse etc.
its still used for better understanding of the compilation and errors.
type the java file and save the file(source file) in the bin folder of ur jdk environment with extension .java. the source file must be the one that has the main method declared.
in the cmd prompt screen , set the path of bin folder.
eg:C:/program files/jdk(some version)/bin/...
for compilation,type:
javac (source file_name).java and press enter
for running the file:
java source file_name

How to pass a command into Telnet Play Script dynamically?

I'd like to pass a command into Telnet Play Script dynamically. Could I do it?
Thank you.

Jim,
I've attached a vi just to show how I send a command to my gateway using Telnet Write.vi. Actually this command changes speed on entered port of my gateway. Port number is changeable. I have question: could I send this command using Telnet Play Script.vi instead of Telnet Write.vi? If Yes - then How?
Tank you
Attachments:
script1.vi ‏10 KB

How can I implement commands in Labwindows?

I have a target with 8051 microprocessor. This microprocessor have a program in MS_DOS.
I want to do an emulation with Labwindows.
I comunicate with pc by RS232.
In the MSDOS program I use the following commands:
sp(back_espace key)= Initialitation board.
vx(direction memory)(enter key)= Readed memory
My question is: How can I implement commands in Labwindows?

Hi,
erm, could you re-post this question in the LabWindows/CVI forum?
You might get a few more answers in there
When you talk about emulating, I assume you're refering to getting Windows (which flavour - 9x/NT/me/xp/2k) to do some sort of display depending on button presses from a user interface, or are you wanting to turn the whole PC into an emulator, whereby another PC communicates to it through the serial port, and you want the emulating pc to react as though it was the 8051?
Thanks
S.
// it takes almost no time to rate an answer

How to enter sysex string in logic 9

I need to send Local Control Off to my CZ-1. I'm trying to figure out how to enter a sysex string in Logic, and I'm having trouble with the event view.
Here's the string:
LOCAL OFF send B0 + channel, 7A, 00
IN logic, I click create and then Syst. Exclusive and I get:
1   1   1   1 $F0 $00 $00
I seem to be unable to set any of those to B0, although I can set 7A and 00
Can someone help me get started with this? is this one event or multiple? How do I set B0 when nothing will let me pick or enter that number?
Thanks!

Joel Braverman wrote:
I need to send Local Control Off to my CZ-1. I'm trying to figure out how to enter a sysex string in Logic, and I'm having trouble with the event view.
Here's the string:
LOCAL OFF send B0 + channel, 7A, 00
IN logic, I click create and then Syst. Exclusive and I get:
1   1   1   1 $F0 $00 $00
I seem to be unable to set any of those to B0, although I can set 7A and 00
Can someone help me get started with this? is this one event or multiple? How do I set B0 when nothing will let me pick or enter that number?
Thanks!
I think the string you're looking for is   F0 44 71 7A F7
What I think B0 refers to is the Device ID, for Casio it's 44
71 is the MIDI channel number the Casio is set to receive on, 71 is MIDI Channel 1.
I assume 7A is the Local Off command.
F0 and F7 are automatically entered by Logic. The $ is signifying a hex value and is just there for show.
It would be great if it were that simple, hopefully it is!

How to enter opening balance for GL A/C(Ex. Bank A/C, Cash A/C, Vendor A/C)

Hi Expert,
How to enter opening balance for last year to closing balance to this year opening balance explain deeply helpful for me Thanks in advance.
Example
All Bank A/C, Cash Book, Vendors, Customers, like that how to enter closing to opening balance.
With Warm regards,
Selva

Dear,
As per SAP standard there is no need to carry forward the balances as the system will do a virtual carry forward into next year opening without creating any FI documents.
If your business scenario demands then you can use the transaction code F-02 for posting a carry forward balances, this will not effect any of your balances but only creates a FI document.
If your R3 version is SAP ECC5 or 6 then use the transaction code FAGLGVTR

How to enter serial number for sale order line which is in shipped status

Hi All,
We have 2 different items which are defined as Serialized at Sale order issue at item definition.
In one sale order,User has forgot to add serial number to one of the item at Ship confirm stage.
He has entered serial number correctly to other item.
Now the both Sale order lines are in Shipped status if we view them through Shipping>transactions.
I am technical guy and new to OM.Could you please let me know the process to enter the serial number for the item to which user has missed it
Thanks,
Satya

Hi Satya,
Since the item is already shipped, you cannot enter serial number for this line.
you have to enter serial numbers after pick confirm only.
check this note
How to Enter Serial Numbers in the Shipping Transactions Form [ID 1235403.1]
As a workaround for the previous lines do RMA and try to receive the goods back to your subinventory.
For all new transactions follow the above notes.
Thanks
-Arif.

How to enter condition wise tax amount manually in MIR7 & MIRO?

We have a PO with a tax code entered in it.
but while parking invoice in MIR7, we want to enter condition wise tax amount manully which is different than calculated tax amount through tax code and subsequently we want the same manual tax amount to be displayed in MIRO also
I tried to enter amount for each condition in 'Detail' screen of 'Tax' tab in MIR7,
but at the time of simulating, amount calculated as per tax code is only shown and not the amount entered by me
'Calculate Tax' checkbox is not selectd in this case.
Can anybody tell me how to enter condition wise tax amount manully in MIR7 & MIRO and post an accounting entry with this manually entered tax amount?

Hi,
i checked their is no unplanned delivery cost and in FV13 tax is 12.5%. In FTXP No Tax Percent rates.
Regards
Mahesh

How to enter two different ED% in J1ID

Hi All,
For a single material code which is having two different ED%, how to enter Exceptional ED% in transaction code J1ID.
For ex: Material no. XYZ is procured with material type 123 and 789 which is having different ED% of 8.13% and 8.14%.
Regards,
Ram

There cannot be two different material type for same material code.
Pl check & confirm.
Regards
Bhavesh Mistry

How to enter Inline command in jdev10

Similar Messages

Maybe you are looking for