How to estimate different cost via diffrent equipement to one product in SAP

hello, everyone,
Our factory have Two equipments , one is a new equipment A , the other is an old equipment B,
they all produce the prodcut W , but the old equipment B consume electricity ,warm water and Raw material is much more than the new equipment A. So the cost price of product W is different when they were produced by equipment B and equipment A.
the Finacial Department and Sales Department want to know different cost price of product W via different equipments in the end of every month. Now we use two different material NO to deal with it(actually it is one product ) ,but this method take a lot trouble to stock, because one product quantities were seperated by different material NO in Storage location.
According to this requirement, we activate the split valation, but the customizing of split valuation just supply one field for" val.type in-house prod", at the same time , the t-code CK11N screen has not the field vauation type. if we don't estimate the material cost price by CK11N, when we create sales billing ,the system can not post COPA document and give a error that is :“Valuation with material cost estimate: error with product "1180119998"
   may you have a good method to deal with this type of business or you ever met this kind of business . may you share it , I appreciate you for your help !!!
    Davis
    Best&Regard.

Davis,
You can create different production order like one production order for new equipment Or Other For second old equipment and old equipment order you can increase the material component quantity .
or second i agree with Mr. Biju K
you can create two cost center
old equipment : xxxxx
new equipment : yyyyy
you can create different work center base on two separate cost center so all cost book in separately in cost center.

Similar Messages

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
- Dave

External Service of 5Equipments, how to distribute the cost to indv equip?

Hi Expert,
if external vendor come to repair the 5boiler (equipments) and invoice us the total cost (labor, material, flight charge, allowance, hotel, taxi). how should i distribute the cost into EACH boiler?
how should i create an order with 5boiler??
Please advise
Thank you
Regards

Hi,
In addition, if there are more equipments under one Functional location & cost history is not required to capture at equipment level, then in Header Main Functional Location will be defined. In Object list, all the equipments will be defined. So that, it is possible to have link between equipments & operations.
[Object List|http://help.sap.com/saphelp_erp60_sp/helpdata/en/3c/abb0a2413911d1893d0000e8323c4f/content.htm]
You can see the Maintenance Orders report as normal. IW39 will not be a problem. There's a flag on the selection field (Incl Object List) to tell the system to look also in the object list.
Cost Distribution - I feel you can create settlement rule as per Object List equipments by mentioning % in that. For example, if there are 5 equipments, then define settlement profile with 5 different settlement receivers 20% each as per the equipment.
But this also updates only CO documents. But as per PM concerned, you cant distribute the cost.
[Cost Distribution|multiple equipment in maintenance order?;
Regards,
Maheswaran.

I want to replace my iPhone 5c for a new one . How much will this cost ? I have my one year warranty but no apple care .

My iphone keeps discharging quickly and it takes long to charge . in 8'hours my phone will charge from 0 to 37% . I went to the apple store and they keep asking me to restore my phone which I did . Now I just want to replace my phone for another . How much will it cost ?

Warranty and Support are only valid in the country of origin. You will need to take the device to whatever country it originally came from.
Apple will not accept shipments from outside the country nor will they return it to an address outside the country.

How to analyse actual cost for each operation in Process/Production Order?

Hi all,
IN SAP, I know that we can analyze plan cost for Operation in Process Order/ Production Order.
However, I can not analyze Actual cost for Operation .
I know the object when I good issue material is ORDER, not OPERATION.
But, as requirement of users, they want to analyze actual cost for each Operation.
CAn SAP do this analyze?
If Yes, What should I do in SAP to have this reports?
THanks in advance,
Emily Nguyen

Hi Emily,
as I see from one other message that you're using material ledger. Then your expectation is apparently to also see the actual costs of materials in your production order by operation.
This is not supported. Actual material costs are handed up in material ledger multi-level settlement from one material to the next, bypassing the production orders.
That means the production order will always contain the material costs valuated at plan price, not at actual price.
For activity prices that might be better, when you revalue the orders at actual activity prices with CON2. But even there I am not sure that it will always be assigned correctly to the operations.
There is currently an enhancement in development, the operation level costing. But that will affect more the planned cost side not the actuals. Might be interesting to learn more about your requirements and the use case behind.
best regards,
Udo

How to use different filter in 3 sheets of one BI query?

I have one BI query. I want to have 3 queries in one excel file, but there will be different company code selected in those 3 queries. Once I refresh this excel file, then I can get 3 different results in the 3 different sheets of the excel file. Could anyone tell me how to make it?
Thanks,
Sudree.

Hi,
this is possible as already suggested earlier here. Create three data providers based on the same query and ensure that the option "restore initial query view on refresh" is not set. Furthermore, if the query contains variables, uncheck the workbook property on the variables tab to display duplicate variables only once.
Now you can specify individual filter values for each query and save the workbook. On opening/refreshing the workbook the specified filter values should still be valid.
You can also watch BEx Analyzer doing this. open any query with one characteristic that does not have too much values. Take this characteristic out of the drilldown, right click it in the navigation pane and choose "Add Drilldown according to <name> in new worksheets". Now BEx Analyzer creates a copy of the data provider based on the same query and sets a filter value on this query.
Regards
Matthias

How to view the cost of all articles at all sites in SAP using a report?

So, here is the ask:
I want to view the cost (could be either Std Cost or Moving Avg Price, based on price control) for all articles (materials) in all the sites (plants) in SAP. This can be a very huge number for retail clients, resulting in millions of records.
I know that MBEW stores this information for an article site level (when site is maintained as val. area), but we need a report to handle huge volumes. Is there a standard report out there, which may leverage info structures to give this information.
Please help!

Hi
For standard LIS, see Note 491519 - Standard analyses - Transaction codes and reports.
I don't know any standard report for your requirement. Actually, I created some reports using MBEW and MBEWH tables. For understanding how MBEWH behaves, please, see SAP Note 193554 - Stock/valuation data of previous periods.
I hope this helps you
Regards
Eduardo

How to set different levels of item permissions (delete one vs. delete all)

In the help documentation I find:
"Manage Content
A user with the Manage Content privilege can add, edit, hide, show, share, and delete, any item, portlet, or tab on the page."
I find that this is not the case. Manage content gives the user the ability to delete only his or her own items.
Anyway, what I need is for some "content admins" to be able to delete all (preferably without being granted Portal Administrator rights) and for the rest to be able to handle his or her own entries.
Tips are highly appreciated.

hi henning,
here is how the ACL rights work:
view: view only - no edit mode
manage items with approval: view/add/edit items. kicks off an approval process. changes active after approval.
manage items: view/add/edit/delete content (all content)
manage: everything + create sub folders + change page properties
if you need more granular rights you would have to setup differnt pages for different users/groups and assign them the priveleges you want.
regards,
christian

How to retrieve different data separated by comma into one column

Hi all,
We have a Custom View.In that some of the customer's Bill-To address is different remaining all columns contain same data.In that case if we query with that customer_number it displays more than one row with different Bill-to addresses,it is fine.But our requirement is we need to display only one row for that customer_number and Bill-to address column shows all Bill-to addresses corresponding to that customer separated by comma.
Could anyone give us any idea to solve this.
Thanks in Advance,
Dhana

i do not a concatenated data
i have a data in a table with columns A & B of same size
A B
1 2
2
3 1
4 2
5 3
6 5
7 1
8 4
9
10 8
if my where condition is 'where A=2'
my output should be
1
2
3
4
5
6
8
10
i want my query to search as loop so that it keeps on searching
for related data as in my case it is
2 is linked to 1
1 is linked to 3
3 is linked to 4
my query should keep on seaching for linked numbers till
it does not find any mathing linked numbers
and the resulted output should come in one single column

How to make different inside/outside margins for only one section?

I'm creating a Pages template and want to have several different section layouts. I've figured out most of them, but haven't been able to get one section to work as I want it.
The problem is that I want a 3 inch left margin on odd-numbered pages, and a 3 inch right margin on even-numbered pages, but for this section only (because it will have graphic objects in those margins). Other sections should have standard symmetrical margins.
I figure this should be possible, but I'm not selecting the right combination of properties. I tried searching the help file for "gutter", which is what the command was back in PageMaker, but couldn't find anything.

With your cursor in the section you want to change the margins, go to the layout inspector (second icon) & click Section. The second selection under Configuration is Left and right pages are different. Then in Layout the left & right margin settings are named inside & outside. You can see the effect by displaying your document 2-up.

How to run different versions of Apache Tomcat on one machine?

Hi, I am developing a web application. My application runs on Apache Tomcat 5.5.12 and i am using jdk 1.5_03. My application detects files that are automatically scanned to a specific directory and queues them for capture in a database.
The scanner software (HP Toolbox) is also a web application (Unfortunately), it installs itself with Apache Tomcat 4.03. It is "wired" in a specialised way (not the way you would usually deploy web apps). So the Web server is customised by HP (Hewlett-Packard).
The scanner needs this software running inorder to automatically scan to a specified folder. You can only specify local directories to scan to from the Toolbox application
There seems to be some resource conflict when I run my version of Tomcat when the Toolbox application is running (I get an exception
..IllegalMonitorState...current thread not owner). Visa vera is alos true..if i start my application first the Toolbox application won't run.
I tried to install the Toolbox app on another machine and monitor a directory remotely...this doesn't work because you can't read or write to remote files from a servlet or JSP.
I tried loading my application in the web apps directory of Apache 4.03 but it did not detect my application. I don't know how to configure the Tomcat customised by HP.
How can i go about this problem? Is there a way of running two versions of Apache Tomcat on one machine?
Thanks
Parthiv

This is the exception i get when i try to run my version of Apache Tomcat when the Toolbox is running: My application is set to port 80.
Exception in thread "http-80-1" java.lang.IllegalMonitorStateException: current thread not owner
     at java.lang.Object.notifyAll(Native Method)
     at org.apache.tomcat.util.net.AprEndpoint$Worker.run(AprEndpoint.java:1216)
     at java.lang.Thread.run(Unknown Source)

How to upload the data from two sheets in one excel into SAP

Hi experts,
                My requirement is to upload the data from two sheets in an excel into an internal table.How can this be achieved.Is some OLE application has to be used?
Thanks
Abhishek

Hi
see this program will upload excel file to application.
*& Report ZSD_EXCEL2
REPORT ZSD_EXCEL2.
types: begin of ttab ,
      fld1(30) type c,
      fld2(30) type c,
      fld3(30) type c,
      fld4(30) type c,
      fld5(30) type c,
      end of ttab.
data: itab type table of ttab with header line.
selection-screen skip 1.
parameters: p_file type localfile default
            'C:\test.xls'.
selection-screen skip 1.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
       exporting
            static    = 'X'
       changing
            file_name = p_file.
start-of-selection.
clear itab. refresh itab.
perform upload_data.
loop at itab.
    write:/ itab-fld1, itab-fld2, itab-fld3, itab-fld4, itab-fld5.
endloop.
* Upload_Data
form upload_data.
data: file type rlgrap-filename.
data: xcel type table of alsmex_tabline with header line.
file = p_file.
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       exporting
            filename                = file
            i_begin_col             = '1'
            i_begin_row             = '1'
            i_end_col               = '200'
            i_end_row               = '5000'
       tables
            intern                  = xcel
       exceptions
            inconsistent_parameters = 1
            upload_ole              = 2
            others                  = 3.
loop at xcel.
    case xcel-col.
      when '0001'.
        itab-fld1 = xcel-value.
      when '0002'.
        itab-fld2 = xcel-value.
      when '0003'.
        itab-fld3 = xcel-value.
      when '0004'.
        itab-fld4 = xcel-value.
      when '0005'.
        itab-fld5 = xcel-value.
    endcase.
    at end of row.
      append itab.
      clear itab.
    endat.
endloop.
endform.

VA01 Sales order (line items) and different Cost center assignment

Hello gurus,
im searching for solutions how to assign different cost center to sales order line items, but only thing that i found is the substitution (Using Substitution (GGB1) to change Cost Center assigned in (OKB9))
Trying to do this i was unable to create something that could work, since there was no Logistic.
Could somebody explain me the Line item in SO assignment to Different cost centers?
I know alot about OKB9, VKOA and other transactions, but still cant find anything suitable to solve this issue
Best regards
Laurynas

What i mean is that, on the end of every month we are gathering information for Statistical Key Figures (from Controlling) entering as CO document and then distributing the costs using KSV5 TC on Internal Orders according those entered statistical key figures.
i.e. we got INCOME 1000000 from 10 internal order, which we distribute on even percentage parts like 10 cost center, each getting 10% of the income.
I tried to create the SO, but the Profit center field, after i entered a number, was changed automatically into another.
And the posting didnt reach Controlling and the assigned Cost center. I think it is a lack of configuration.
Regards
Laurynas

How to handle labor cost?

Dear All,
Scenario:
I have a finished component ;an assembly of 3 items,how to handle the labor cost i am paying for assembling in SBO.
could you all please write in detail .
Thanks,
Nandakumar

Hi Nandakumar,
you could have a look at this Expert Empowerment Session:
PDF:
[18.05.2007 - Moving Average Price calculation - effects of Rounding|https://websmp203.sap-ag.de/~sapidb/011000358700000418832007E/KP_MAP_in_BOM.pdf]
Recorded Webex
[18.05.2007 - Moving Average Price calculation - effects of Rounding|https://websmp203.sap-ag.de/~sapidb/011000358700000415572007E/CW20_FIN_moving.wrf]
There is an example involving a BOM with integrated labout costs.
& also this Wiki:
[How to include labour cost in a BOM. |https://wiki.sdn.sap.com/wiki/display/B1/Howtoincludelabourcostina+BOM.]
All the best,
Kerstin

Even if we have bought the advance version of Adobe FormsCentral, is it possible to receive via e-mail the completed form in .pdf? If not, is it possible to develop this option? How much would it cost?

Even if we have bought the advance version of Adobe FormsCentral, is it possible to receive via e-mail the completed form in .pdf? If not, is it possible to develop this option? How much would it cost?

I know of no way to do this with Reader or XML.

How to estimate different cost via diffrent equipement to one product in SAP

Similar Messages

Maybe you are looking for