How to Executing a Specific RuleSet within a Dictionary on Oracle Business

Hi All
How does one explicitly execute a specific ruleset in a Oracle Business Rules dictionary?
While using the Business Rules Component inside our composite application(in JDeveloper), the only options available are:
· Service: Decision Service name
· Dictionary Name: The name of the dictionary that you want to use.
· Name: Business rules component name.
There is no section where we can select to execute only a specific rule set within a dictionary.
Is this fuctionality not supported or is there a way around this, where we could be able to execute a specific ruleset within a dictionary?
Regards
Emmanuel

You get to choose the option of the Rule Dictionary When dragging in BPEL, if you have already built the bpel process with the rules call, you can do the following
--> Open the .rules file in the Jdev
--> Go to the Decision Fucntions Tab
--> Select the decision function in the list( by default there would be only one)
--> click on the edit icon
--> In the bottom you would get to select the Rule Sets you want to be included in this function call(BusinessRulesSets to be included as part of the call)
--> This would cater your requirement.
Regards,
Ajay

Similar Messages

Executing a Specific RuleSet within a Dictionary on Oracle Business Rules

Good Day,
How does one explicitly execute a specific ruleset in a Oracle Business Rules dictionary?
While using the Business Rules Component inside our composite application(in JDeveloper), the only options available are:
· Service: Decision Service name
· Dictionary Name: The name of the dictionary that you want to use.
· Name: Business rules component name.
There is no section where we can select to execute only a specific rule set within a dictionary.
Is this fuctionality not supported or is there a way around this, where we could be able to execute a specific ruleset within a dictionary?
kind regards

You get to choose the option of the Rule Dictionary When dragging in BPEL, if you have already built the bpel process with the rules call, you can do the following
--> Open the .rules file in the Jdev
--> Go to the Decision Fucntions Tab
--> Select the decision function in the list( by default there would be only one)
--> click on the edit icon
--> In the bottom you would get to select the Rule Sets you want to be included in this function call(BusinessRulesSets to be included as part of the call)
--> This would cater your requirement.
Regards,
Ajay

How to know the specific size of a field in oracle table

Hello,
oracle 11.2.0.3 on redhat
i have three tables with same structure, table0, table50, table100:
create table table0 (id number, shipment RAW(2000), options RAW(2000));
i inserted 10000 rows in each but with some differences:
table0 has 10000 id, but shipment and options has null values
table50 has 10000 id, but shipment and options has only 5000 rows, the other 5000 are null values
table100 has 10000 rows of id, shipment and options. No null values.
I want to know the specific size of each column, also the size of each row, to know the exactly size of the field.
for example:
row 1, column options of table100 has "asdfasdfagasdgasbabsdgoasdpgiahnwe1129u412094u12"
row 2, column options of table100 has "a".
both are raw datatype, but i think its space will has different size (bytes), how to know it? any query?
I found this query:
select owner,tablespace_name,segment_name,sum((bytes/1024/1024)) Bytes
from sys.dba_extents
where owner in 'MAA' and segment_type='TABLE' and segment_name ='TABLE00'
group by tablespace_name,owner,segment_name
order by owner,tablespace_name,segment_name, bytes; but i think it isn't my solution.

thx mr. sb92075
i tried with vsize too but same result:
with table50
SELECT VSIZE(OPTIONS) FROM TABLE00;
VSIZE(OPTIONS)
             1000
             1000
             1000
             1000
               *with table100
SELECT VSIZE(OPTIONS) FROM TABLE100;
VSIZE(C_ELECCION)
             2000
             2000
             2000
             2000
                  *it's the same size for 'a' like 'abcasdfjañldngaosnbaposnbpaosuqroiwejrklasndiaoshbaposdjgajs'?? It's hard for me to believe.
data is saved in blocks, a extents is a contiguos number of blocks and a group of extensions are segments. If you insert some text in a table field, Oracle create a extension and insert there the data but depend the bytes you insert Oracle will create one or more extents. How to know this specific space in that field?

How to execute a specific function only in DEBUG and AdHoc modes

Hi,
What i would like to do is a simple button with an action method, This button is initialized, created, assigned to its action method and shown ONLY in Debug and AdHoc modes. So as a developer or tester, i can see the button, but in the release, the client won't be able to see that button.
What i did so far is the following:
-In my project-->Build Settings Tab, i set the Debug values to 1 in both Debug and Adhoc, like this:
-Then i opened up the prefix.pch file, and there, i am blocked and i don't know what to do.
Basically, my action method is something like this:
UIButton btnSwitch=[[UIButton alloc]init];
//Etc...
The above code should be called in a specific file (The UIViewController class which should contain the button).
How can i do that, i mean, how can i tell my application to execute that code in a specifi file only in DEBUG and Adhoc modes.
Thanx in advance.

Hi,
What i would like to do is a simple button with an action method, This button is initialized, created, assigned to its action method and shown ONLY in Debug and AdHoc modes. So as a developer or tester, i can see the button, but in the release, the client won't be able to see that button.
What i did so far is the following:
-In my project-->Build Settings Tab, i set the Debug values to 1 in both Debug and Adhoc, like this:
-Then i opened up the prefix.pch file, and there, i am blocked and i don't know what to do.
Basically, my action method is something like this:
UIButton btnSwitch=[[UIButton alloc]init];
//Etc...
The above code should be called in a specific file (The UIViewController class which should contain the button).
How can i do that, i mean, how can i tell my application to execute that code in a specifi file only in DEBUG and Adhoc modes.
Thanx in advance.

When sync pics PC to iPad with iTunes, how do I select specific pics within each subdirectory?

My pics are on a external hard drive and organized into directories such as sports, birthdays,etc. I would want to select only some of the pics in each directory to sync with the iPad. I can select the directories to be synced but not specific pics. How can I select the pics without creating yet another directory for purpose of the sync.

then you may want to look into other photo apps than the built in one. the build in one is set to sync with one folder, not with multiple files from multiple folders. It simply can't do what you'd like it to do I'm afraid.
Someone may be able to recommend a different photo app for you to try.

How to create customer specific fields within PC 10.0?

Hello,
for previous Process Controls versions 2.5 and 3.0 it was available two how-to guides to create customer specific fields. Nevertheless so far I couldn't find those versions for PC10.0.
Does anyone have them? Or know if the 3.0 version is also valid for 10.0?
Regards
Andre Yuji

Dear Johannes,
We have a few administration transactions that you can use on back-end. For example:GRFN_STR_CHANGE -GRFN_STR_CHANGE-Change Process Control
as well as RE_RHGRENZ4 to Set a new end date to the objects.
At last case, you can run the program RHRHDL00 thru SE38 Tcode.Be carefull because this program delete the object from database.
Regards,
Karina Atonaidan

How to run a specific LOVs within a single form? [SOLVED]

Hi people,
I am new to forms.I have two LOVs in a single form LOV7 and LOV25.one is created through wizard and other is created manually.while i execute the form automatic lov(LOV7) gets displayed.but what i should do to run the manually created LOV25?.am using forms 6i with oracle 9i.thanku
With Regards
VIDS
Edited by: vidusnat on Apr 25, 2009 2:39 AM

Hai vidusnat,
In forms, set the control property List Of Values.
In this case the property will be set by the LOV name which u have created through wizard(LOV7).
select the LOV name(LOV25) which u created manually.
Or U can set this property by code also.
SET_ITEM_PROPERTY('control NAME', LOV_NAME, 'lov name');
or in the KEY-LISTVAL Procedure, u can call the desired LOV.
DECLARE
     Bln_Temp BOOLEAN;
BEGIN
     IF condition1 THEN
          Bln_Temp := SHOW_LOV('lov 1 name');
ELSE
          Bln_Temp := SHOW_LOV('lov 2 name');
     END IF;
END;
Regards,
Manu.

How to execute exact match & contains text search simultaneoulsy in Oracle 10g

Hi,
We have scenario where there are more than 50 million rows in a table with description column length as 1000 character. We have a web interface from where we generate a rule of comma separated keywords like
"Standard", Single, Cancel, "deal"    & so on. The words in quotes needs to be checked for exact match & the one without quotes will be searched using contains.
The problem is that we can have a rule of such a combination as large as 4000 characters of inclusion & 2000 such characters for exclusion (not to consider the description under exclusion) and this search when run on the table with millions of rows does not work using oracle regular expression, but works with smaller no. of search keywords.
Is there a better way to do such a kind of search in Oracle or if not then outside oracle using any other tool
Thanks,
AP

Please find below the table script, few insert statements along with the SP & function. Please help.
-- Create Table
CREATE TABLE Roomdescriptionmaster
ID long,
ROOMDESCRIPTION nvarchar2, --- max 1000 charaters
Createddate datetime
----- Insert statements
INSERT INTO ROOMDESCRIPTION (ID, ROOMDESCRIPTION, Createddate ) VALUES (1, 'Double Room (2 Adults + 2 Children) | FREE cancellation before Mar 16, 2014 PAY LATER All-Inclusive [ Included:10 % VAT] Meals:All meals and select beverages are included in the room rate.Cancellation:If canceled or modified up to 2 days before date of arrival,no fee will be charged.If canceled or modified later,100 percent of the first two nights will be charged.In case of no-show, the total price of the reservation will be charged. Prepayment:No deposit will be charged', sysdate)
INSERT INTO ROOMDESCRIPTION (ID, ROOMDESCRIPTION, Createddate ) VALUES (1, 'Double or Twin Room | FREE cancellation before Feb 1, 2014 PAY LATER All-Inclusive [ Included:10 % VAT] Meals:All meals and select beverages are included in the room rate.Cancellation:If canceled or modified up to 2 days before date of arrival,no fee will be charged.If canceled or modified later,100 percent of the first two nights will be charged.In case of no-show, the total price of the reservation will be charged. Prepayment:No deposit will be charged', sysdate)
INSERT INTO ROOMDESCRIPTION (ID, ROOMDESCRIPTION, Createddate ) VALUES (1, 'Quadruple Room (3 Adults + 1 Child) | FREE cancellation before Mar 16, 2014 PAY LATER Full board included [ Included:10 % VAT] Meals:Breakfast, lunch & dinner included.Cancellation:If canceled or modified up to 2 days before date of arrival,no fee will be charged.If canceled or modified later,100 percent of the first two nights will be charged.In case of no-show, the total price of the reservation will be charged. Prepayment:No deposit will be charged', sysdate)
INSERT INTO ROOMDESCRIPTION (ID, ROOMDESCRIPTION, Createddate ) VALUES (1, 'Triple Room with Lateral Sea View (2 Adults + 1 Child) | FREE cancellation before Dec 6, 2013 PAY LATER All-Inclusive [ Included:10 % VAT] Meals:All meals and select beverages are included in the room rate.Cancellation:If canceled or modified up to 2 days before date of arrival,no fee will be charged.If canceled or modified later,100 percent of the first two nights will be charged.In case of no-show, the total price of the reservation will be charged. Prepayment:No deposit will be charged', sysdate)
INSERT INTO ROOMDESCRIPTION (ID, ROOMDESCRIPTION, Createddate ) VALUES (1, 'Single Room with Lateral Sea View | FREE cancellation before Dec 6, 2013 PAY LATER All-Inclusive [ Included:10 % VAT] Meals:All meals and select beverages are included in the room rate.Cancellation:If canceled or modified up to 2 days before date of arrival,no fee will be charged.If canceled or modified later,100 percent of the first two nights will be charged.In case of no-show, the total price of the reservation will be charged. Prepayment:No deposit will be charged', sysdate)
--SP
CREATE OR REPLACE PROCEDURE
SP_PGHGETROOMDESCRIPTION(v_BId                number,
                           v_DaysOfData         integer,
                           v_Incl1              nvarchar2,
                           v_Incl2              nvarchar2,
                           v_Incl3              nvarchar2,
                           v_Excl1              nvarchar2,
                           v_CurrentIndex       integer,
                           v_RecordPerPage      integer,
                           v_IndexMultiplier    integer,
                           ref_recordset        out sys_refcursor
                           ) as
start_index        integer;
end_index          integer;
Incl1              nvarchar2(2000);
Incl2              nvarchar2(2000);
Incl3              nvarchar2(2000);
Excl1              nvarchar2(2000);
v_desc_utf_value   VARCHAR2(10);
begin
v_desc_utf_value:= 'utf8';
if v_incl1 is null or trim(v_incl1) = '' then
     --dbms_output.put_line('include 1 is null or blank');
     Incl1 := '';
else
     Incl1 := lower(v_Incl1);
end if;
if v_incl2 is null or trim(v_incl2) = '' then
     --dbms_output.put_line('include 2 is null or blank');
     Incl2 := '';
else
     Incl2 := lower(v_Incl2);
end if;
if v_incl3 is null or trim(v_incl3) = '' then
     --dbms_output.put_line('include 3 is null or blank');
     Incl3 := '';
else
     Incl3 := lower(v_Incl3);
end if;
if v_Excl1 is null or trim(v_Excl1) = '' then
     --dbms_output.put_line('Exclude 1 is null or blank');
     Excl1 := '';
else
     Excl1 := lower(v_Excl1);
end if;
   -- Old code
   --     and regexp_like(lower(ROOMDESCRIPTION), Incl1, 'i')
   --    and regexp_like(lower(ROOMDESCRIPTION), Incl2, 'i')
   --     and regexp_like(lower(ROOMDESCRIPTION), Incl3, 'i')
   --     and not regexp_like(lower(ROOMDESCRIPTION), Excl1, 'i')
--- First call to SP
if v_CurrentIndex = 1 then
      start_index := v_RecordPerPage * v_IndexMultiplier;
      end_index   := (v_CurrentIndex - 1 + v_IndexMultiplier) * v_RecordPerPage;
      open ref_recordset for
     select * from (
      select ROOMDESCRIPTION, Createddate, rownum as rn
      from roomdescriptionmaster
      where BID = v_BId
      and TO_NUMBER(trunc(sysdate) - to_date(to_char(createddate, 'yyyy-mm-dd'),'yyyy-mm-dd')) <= v_DaysOfData
      and length(FN_GET_RESTRICTION(lower(ROOMDESCRIPTION),Incl1,Incl2,Incl3,Excl1,v_desc_utf_value)) > 0
      and row_num <= v_RecordPerPage * v_IndexMultiplier
      order by row_num;
else
--- Subsequent calls to SP using paging from UI
      start_index := (v_CurrentIndex - 1) * v_RecordPerPage + 1;
      end_index   := (v_CurrentIndex - 1 + v_IndexMultiplier) * v_RecordPerPage;
      open ref_recordset for
      select * from (
      select ROOMDESCRIPTION, Createddate, rownum as rn
      from roomdescriptionmaster
      where BID = v_BId
      and TO_NUMBER(trunc(sysdate) - to_date(to_char(createddate, 'yyyy-mm-dd'),'yyyy-mm-dd')) <= v_DaysOfData
      and length(FN_GET_RESTRICTION(lower(ROOMDESCRIPTION),Incl1,Incl2,Incl3,Excl1,v_desc_utf_value)) > 0
      order by roomdescriptionmasterid desc
      where rn >= start_index
      and rn <= end_index
      order by rn;
end if;
commit;
end SP_PGHGETROOMDESCRIPTION;
--Function
CREATE OR REPLACE FUNCTION FN_GET_RESTRICTION(
v_rate_description IN NVARCHAR2,
v_include_1 IN NVARCHAR2,
v_include_2 IN NVARCHAR2,
v_include_3 IN NVARCHAR2,
v_exclude IN NVARCHAR2, v_desc_utf_value IN VARCHAR2)
RETURN NVARCHAR2
IS
CURSOR include_1_cur IS
select regexp_substr(str, '[^,]+', 1, level) str
from (select v_include_1 str from dual)
connect by level <= length(str)-length(replace(str,','))+1;
CURSOR include_2_cur IS
select regexp_substr(str, '[^,]+', 1, level) str
from (select v_include_2 str from dual)
connect by level <= length(str)-length(replace(str,','))+1;
CURSOR include_3_cur IS
select regexp_substr(str, '[^,]+', 1, level) str
from (select v_include_3 str from dual)
connect by level <= length(str)-length(replace(str,','))+1;
CURSOR exclude_cur IS
select regexp_substr(str, '[^,]+', 1, level) str
from (select v_exclude str from dual)
connect by level <= length(str)-length(replace(str,','))+1;
include_1_rec include_1_cur%rowtype;
include_2_rec include_2_cur%rowtype;
include_3_rec include_3_cur%rowtype;
exclude_rec exclude_cur%rowtype;
tmp_var NVARCHAR2(200);
tmp_var_int NUMBER;
tmp_flag_int NUMBER;
return_str NVARCHAR2(200);
tmp_length NUMBER;
tmp_length_include_1 NUMBER;
tmp_length_include_2 NUMBER;
tmp_length_include_3 NUMBER;
tmp_length_exclude NUMBER;
tmp_regex_pattern VARCHAR2(1000);
flag_include_1_match INTEGER;
flag_include_2_match INTEGER;
flag_include_3_match INTEGER;
flag_exclude_match INTEGER;
BEGIN
tmp_length_include_1 := nvl(length(v_include_1),0);
tmp_length_include_2 := nvl(length(v_include_2),0);
tmp_length_include_3 := nvl(length(v_include_3),0);
tmp_length_exclude := nvl(length(v_exclude),0);
flag_include_1_match := 0;
flag_include_2_match := 0;
flag_include_3_match := 0;
flag_exclude_match := 0;
IF tmp_length_include_1>0 OR tmp_length_include_2 >0
OR tmp_length_include_3 >0 OR tmp_length_exclude >0 THEN
IF v_desc_utf_value ='utf8' THEN
    ----------------------------------------------------- UTF 8 STARTED --------------
-----------------------------------------   INCLUDE 1
tmp_length := tmp_length_include_1;
IF tmp_length > 0 THEN
tmp_flag_int :=0;
FOR include_1_rec in include_1_cur
LOOP
tmp_var := trim('' || include_1_rec.str);
--dbms_output.put_line(tmp_var);
tmp_regex_pattern := '[^[:alnum:]]'||tmp_var||'[^[:alnum:]]|^'||tmp_var||'$|^'||tmp_var||'[^[:alnum:]]|[^[:alnum:]]'||tmp_var||'$';
tmp_var_int := nvl(regexp_instr(v_rate_description,tmp_regex_pattern,1,1),0);
IF (tmp_var_int <> 0) THEN
tmp_flag_int :=1;
flag_include_1_match := 1;
EXIT;
END IF;
END LOOP;
ELSE
flag_include_1_match := 1;
END IF;
-------------------------------------------- INCLUDE 2
tmp_length := tmp_length_include_2;
IF tmp_length > 0 THEN
    tmp_flag_int :=0;
IF flag_include_1_match =1 THEN
FOR include_2_rec in include_2_cur
LOOP
tmp_var := trim('' || include_2_rec.str);
tmp_regex_pattern := '[^[:alnum:]]'||tmp_var||'[^[:alnum:]]|^'||tmp_var||'$|^'||tmp_var||'[^[:alnum:]]|[^[:alnum:]]'||tmp_var||'$';
tmp_var_int := nvl(regexp_instr(v_rate_description,tmp_regex_pattern,1,1),0);
IF (tmp_var_int <> 0) THEN
tmp_flag_int :=1;
flag_include_2_match := 1;
EXIT;
END IF;
END LOOP;
END IF;
ELSE
flag_include_2_match := 1;
END IF;
-------------------------------------------- INCLUDE 3
tmp_length := tmp_length_include_3;
IF tmp_length > 0 THEN
tmp_flag_int :=0;
   IF flag_include_2_match =1 THEN
FOR include_3_rec in include_3_cur
LOOP
tmp_var := trim('' || include_3_rec.str);
tmp_regex_pattern := '[^[:alnum:]]'||tmp_var||'[^[:alnum:]]|^'||tmp_var||'$|^'||tmp_var||'[^[:alnum:]]|[^[:alnum:]]'||tmp_var||'$';
tmp_var_int := nvl(regexp_instr(v_rate_description,tmp_regex_pattern,1,1),0);
IF (tmp_var_int <> 0) THEN
tmp_flag_int :=1;
flag_include_3_match := 1;
EXIT;
END IF;
END LOOP;
END IF;
ELSE
flag_include_3_match := 1;
END IF;
-------------------------------------------- EXCLUDE
tmp_length := tmp_length_exclude;
IF tmp_length > 0 and flag_include_3_match =1 THEN
FOR exclude_rec in exclude_cur
LOOP
tmp_var := trim('' || exclude_rec.str);
tmp_regex_pattern := '[^[:alnum:]]'||tmp_var||'[^[:alnum:]]|^'||tmp_var||'$|^'||tmp_var||'[^[:alnum:]]|[^[:alnum:]]'||tmp_var||'$';
tmp_var_int := nvl(regexp_instr(v_rate_description,tmp_regex_pattern,1,1),0);
IF (tmp_var_int <> 0) THEN
tmp_flag_int := -1;
return_str := '';
EXIT;
END IF;
END LOOP;
END IF;
ELSE
----------------------------------------------------- UTF 16 STARTED --------------
-----------------------------------------   INCLUDE 1
tmp_length := tmp_length_include_1;
IF tmp_length > 0 THEN
tmp_flag_int :=0;
FOR include_1_rec in include_1_cur
LOOP
tmp_var := trim('' || include_1_rec.str);
--dbms_output.put_line(tmp_var);
tmp_var_int := nvl(INSTR(v_rate_description,tmp_var,1,1),0);
IF (tmp_var_int <> 0) THEN
tmp_flag_int :=1;
flag_include_1_match := 1;
EXIT;
END IF;
END LOOP;
ELSE
flag_include_1_match := 1;
END IF;
-------------------------------------------- INCLUDE 2
tmp_length := tmp_length_include_2;
IF tmp_length > 0 THEN
    tmp_flag_int :=0;
IF flag_include_1_match =1 THEN
FOR include_2_rec in include_2_cur
LOOP
tmp_var := trim('' || include_2_rec.str);
tmp_var_int := nvl(INSTR(v_rate_description,tmp_var,1,1),0);
IF (tmp_var_int <> 0) THEN
tmp_flag_int :=1;
flag_include_2_match := 1;
EXIT;
END IF;
END LOOP;
END IF;
ELSE
flag_include_2_match := 1;
END IF;
-------------------------------------------- INCLUDE 3
tmp_length := tmp_length_include_3;
IF tmp_length > 0 THEN
tmp_flag_int :=0;
   IF flag_include_2_match =1 THEN
FOR include_3_rec in include_3_cur
LOOP
tmp_var := trim('' || include_3_rec.str);
tmp_var_int := nvl(INSTR(v_rate_description,tmp_var,1,1),0);
IF (tmp_var_int <> 0) THEN
tmp_flag_int :=1;
flag_include_3_match := 1;
EXIT;
END IF;
END LOOP;
END IF;
ELSE
flag_include_3_match := 1;
END IF;
-------------------------------------------- EXCLUDE
tmp_length := tmp_length_exclude;
IF tmp_length > 0 and flag_include_3_match =1 THEN
FOR exclude_rec in exclude_cur
LOOP
tmp_var := trim('' || exclude_rec.str);
tmp_var_int := nvl(INSTR(v_rate_description,tmp_var,1,1),0);
IF (tmp_var_int <> 0) THEN
tmp_flag_int := -1;
return_str := '';
EXIT;
END IF;
END LOOP;
END IF;
END IF;
IF tmp_flag_int = 1 THEN
return_str := 'truely matched';
ELSE
return_str := '';
END IF;
ELSE
return_str := '';
END IF;
return return_str;
EXCEPTION
WHEN OTHERS THEN
--dbms_output.put_line('Exception');
    RAISE;
END FN_GET_RESTRICTION;

How to set user specific Layout for executing IW38/IW39 report.

Dear Experts,
We have 10 users seperatly, For executing IW38/39 transaction they have maintained seperate layouts for executing the reports. While saving layout they have saved the layout as 'user specific' Now some body has chage the settings.
After changing the setting all are getting same layout.
Please suggest how to set user specific layout. When user enter the IW38/39 report by default he should get his layout.
Thanks in advance.

Create Variant using SHD0 and with Group and assign to particular user's
Here is the steps
Creating a Variant Group
1. Open transaction SHD0, enter the transaction code, and press enter.
2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
Assigning Users
Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
1. Return to the Standard Variants tab page, Variant Groups sub tab page.
2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
You can use this procedure of user assignment for all other users that you want to add to the variant group
Hope this helps.
Thanks
S.N

How do I know what transactions executed by specific user for last month

All
We have a request to find out what transactions are executed by secific user
for last couple of months.
Is there any report in SAP would tell me ?
Please advise.
From
PT.

Hello PT,
If you use the search for the term "How do I know what transactions executed by specific user for last month" then I guarantee you some good hits in the result, and further more detailed search terms to use...
Cheers,
Julius
(this time in response to the correct thread...)

How to: Select a Specific Timeline Displayed in Project Online when having multiple timelines within the Enterprise Project

Currently I have an Enterprise Project which has 6 custom timelines and I want to know how to select a specific timeline to be displayed on the Project specific SharePoint site.
I'll provide some background for you so you understand my issues... I have created a "template" project with 6 custom timelines. From that project I created multiple new projects - which they all have the 6 custom timelines. These projects are
all stored in the Project Center. The problem I am having is I don't understand how to select a specific timeline to show on the project specific SharePoint site. They all seem to be displaying 1 of the 6 timelines (in no particular order). I was thinking
maybe if I had edited a project and saved it while it was displaying a specific timeline it would display the last selected timeline on the SharePoint site, but it doesn't seem to be doing that.
Is there a way to select a specific timeline to display on the SharePoint site? Also, is there a way for a user to cycle through the numerous timeline view on the project specific SharePoint site?
I await your help!! :)

Michelle_Sm --
I ran into this problem at the company where I used to work. One of our PMs had created multiple Timeline views, and wanted a specific custom Timeline view to show up in the Project Site for that project. I could not see any way to make that
happen. We had one of our SharePoint developers look into the issue, and he could not see any way to make this happen either. So, I am thinking this is not possible to do. But I would gladly welcome others in this forum to tell us the trick,
if there is one! :) Hope this helps.
Dale A. Howard [MVP]

How do I encrypt my external hard drive and subsequently a specific file within it, using my Mac? I tried creating a disk image but permission was denied.

Encrypting an external hard drive and specific folders within. Permission denied using disk image.

VKP90 wrote:
When I tried to encrypt a single file within the hard drive itself, I got the following: Disk Utility Progress: Unable to create "Name of my file" (Permission Denied).
When I tried encrypting the entire hard disk itself, I got: A GUID Partition Table (GPT) partitioning scheme is required.
I have also currently used Time Machine on the external hard drive, along with saving other data. Hence, I am not sure if partitioning is going to delete any of this (a video I watched mentioned that using the + button when creating partitions retains current data). Backing up the external hard drive is out of the option since it is the back up to my Mac.
You can't encrypt a single file. I'm not sure what you did to try. You can make an encrypted disk image which begins with a folder, if desired. Or, you can just create a blank, encrypted disk image, then move your desired files into that.
While you could partition off the free space without erasing the disk, you cannot encrypt it because you need a GUID Partition table which requires you to repartition the entire drive, not just the free space.

PL/SQL: Executing a procedure from within another procedure

Hello, I'm a newbie and I need help on how to execute procedures from within another procedure. The procedure that I call from within the procedure have return values that I want to check.
I tried: EXECUTE(user_get_forum_info(p_forumid, var_forum_exists, var_forum_access, var_forumname));
but I get the error message:
PLS-00103: Encountered the symbol "USER_GET_FORUM_INFO" when expecting one of the following::= . ( @ % ; immediate
The symbol ":=" was substituted for "USER_GET_FORUM_INFO" to continue.
And when I tried: EXECUTE(user_get_forum_info(p_forumid, var_forum_exists, var_forum_access, var_forumname));
I get the error message:
PLS-00222: no function with name 'USER_GET_FORUM_INFO' exists in this scope
PL/SQL: Statement ignored
The procedure USER_GET_FORUM_INFO exists. (don't understand why it says "no FUNCTION with name", it's a procedure I'm executing)
I'm stuck so thanks for any help...
Below is all the code. I'm using Oracle 9i on RedHat Linux 7.3.
================================================================================
CREATE OR REPLACE PROCEDURE user_forum_requestsaccess (
p_forumid IN NUMBER,
p_requestmessage IN VARCHAR2
AS
var_forumid NUMBER;
var_forum_exists NUMBER;
var_forum_access NUMBER;
request_exists NUMBER;
var_forumname VARCHAR2(30);
FORUM_DOESNT_EXIST EXCEPTION;
FORUM_USER_HAS_ACCESS EXCEPTION;
FORUM_REQUEST_EXIST EXCEPTION;
BEGIN
SELECT SIGN(NVL((SELECT request_id FROM forum.vw_all_forum_requests WHERE forum_id = p_forumid AND db_user = user),0)) INTO request_exists FROM DUAL;
EXECUTE(user_get_forum_info(p_forumid, var_forum_exists, var_forum_access, var_forumname));
IF var_forum_exists = 0 THEN
RAISE FORUM_DOESNT_EXIST;
ELSIF var_forum_access = 1 THEN
RAISE FORUM_USER_HAS_ACCESS;
ELSIF request_exists = 1 THEN
RAISE FORUM_REQUEST_EXIST;
ELSE
INSERT INTO tbl_forum_requests VALUES (SEQ_TBL_FORUM_REQ_REQ_ID.NEXTVAL, SYSDATE, p_requestmessage, p_forumid, user);
INSERT INTO tbl_forum_eventlog VALUES (SEQ_TBL_FORUM_EVNTLOG_EVNT_ID.NEXTVAL,SYSDATE,1,'User ' || user || ' requested access to forum ' || var_forumname || '.', p_forumid,user);
COMMIT;
END IF;
EXCEPTION
WHEN
FORUM_DOESNT_EXIST
THEN RAISE_APPLICATION_ERROR(-20003,'Forum doesnt exist.');
WHEN
FORUM_USER_HAS_ACCESS
THEN RAISE_APPLICATION_ERROR(-20004,'User already have access to this forum.');
WHEN
FORUM_REQUEST_EXIST
THEN RAISE_APPLICATION_ERROR(-20005,'A request to this forum already exist.');
END;
GRANT EXECUTE ON user_forum_requestsaccess TO forum_user;
================================================================================
Regards Goran

you don't have to use execute when you want to execute a procedure (only on sql*plus, you would use it)
just give the name of the funtion
create or replace procedure test
as
begin
    dbms_output.put_line('this is the procedure test');
end test;
create or replace procedure call_test
as
begin
    dbms_output.put_line('this is the procedure call_test going to execute the procedure test');
    test;
end call_test;
begin
    dbms_output.put_line('this is an anonymous block calling the procedure call_test');
    call_test;
end;
/

How to Execute a Remote Procedure in Portal using Database Link

Hi,
I followed the instructions to create a Portal form for a remote procedure. But I am encountering the following error. Can someone advise what may be the cause?
Failed to execute - Missing string(create_package_body) language(us) domain (wwv) sub_domain (wwv_builder) (WWV-04300)
ORA-04020: deadlock detected while trying to lock object PUBLIC.PORTLET_SCHEMA (WWV-11230)
Failed to parse as PORTAL - (WWV-08300)
PURPOSE
How to execute a remote procedure in Portal using Database Link.
DESCRIPTION
This procedure assumes that you have two databases, one of which is remote, and Portal is configured in the other.
Remote Database A:
==================
1) Create a procedure as follows: Create or Replace PROCEDURE SCOTT.ADD_TWO_VALUES ( v_one IN NUMBER, v_two IN NUMBER, v_result OUT NUMBER) as begin v_result :=v_one+v_two; end; 2) Grant execute privileges to PUBLIC on the procedure.
Database B (where Portal is configured): ========================================
1) Create a public database link and choose to connect as a specific user (say SYSTEM). By default, in an Oracle 8i database, the "global_names" parameter in initSID.ora (or init.ora) file is set to "true". This Global Naming parameter enforces that a dblink has the same name as the database it connects to. Therefore, if the remote global database (A) name is "ora8.acme.com" then the database link should also be named as "ora8.acme.com".
2) Create a synonym for the procedure in Database A. Make sure you fully qualify the procedure name in the remote database (like SCOTT.ADD_TWO_VALUES).
3) Create a dynamic page to execute the procedure. The ORACLE tags in the dynamic page will look similar to the following: <ORACLE> DECLARE v_total NUMBER; BEGIN ADD_TWO_VALUES(:v_one,:v_two, v_total); htp.p('The total is => '); htp.p('<input type="TEXT" VALUE='||v_total||'>'); htp.para; htp.anchor('http://<machine.domain:port#>/pls/portal30/SCOTT.DYN_ADD_TWO_VALUES.show_parms', 'Re-Execute Procedure'); END; </ORACLE>
4) Portal does not have an option to create a form based on a synonym. Therefore, if you want to create a form instead of a dynamic page, create a wrapper procedure and then create a form based on this procedure. For example: Create or Replace PROCEDURE PORTAL30.ADD_TWO_VALUES_PR ( v_one IN NUMBER, v_two IN NUMBER, v_total OUT NUMBER) as begin add_two_values(v_one, v_two, v_total); end;
5) Grant execute privileges to PUBLIC on the procedure.

hello...
any input will welcomed... Thanks..

How to identify a specific object that changed in a data table?

I have a data table in my jsf page which populate by myList (a property of type List<myObject> in myBean) that contains a list of myObject objects.
Within data table, the 'amount' property of myObject is in a h:inputText named 'amountText'.
How can I recalculate another property (for example 'cost') of the specific myObject within one of the
data table rows whenever user change the value of 'amountText' ?

Hi Roger,
I guess, it is up to your choice about design how you want to implement.
you have two ways....
1) Use valueChangeListener attribute of the text field, as it will be called for the row of the database on which the bind property value is actually changed.
2) Not prefered, but you can use setterMethod of amount in the your object, and can compare its new value with the old one and can decide the consequence.
Please let me know, if it solves your concern or you have a different concern.

How to Executing a Specific RuleSet within a Dictionary on Oracle Business

Similar Messages

Maybe you are looking for