How to expand multiple level of variant material in quotation?
Hi,
I use VA21 to create a quotation, there is a variant material such as AA. The Bom of AA is
AA
Aa
aa
ab
Ba
ba
bb
I have create the class of variant, characteristics and configuration profile, also I have create the Bom and assign the dependency. But in my quotation, when I chosed the characteristics, only the first level can be brought out under the top material. The item aa can't be brought out.
Item material Item category Higher-level Item
10 AA AGC
20 Aa AGX 10
Result expected
Item material Item category Higher-level Item
10 AA AGC
20 Aa AGC/AGX 10
30 aa AGX 20
Thanks!
Edited by: wayne wu on Jun 20, 2011 5:24 AM
Ankur,
I change the Structure Scope to B and Application SD01, but it seems conflict with the config strategy and variant matching. So, in VA21, material can't be determined by system automatically through choosing characteristics. System expands all the material of the top material. Like this:
AA
Aa
aa
ab
Ba
ba
bb
Are there some mistakes in my Item Category configuration?
Thanks.
Edited by: wayne wu on Jun 21, 2011 4:41 AM
Similar Messages
-
How to assign multiple batch class to material in classification view
Dear Gurus,
How to assign multiple batch class to material in classification view.
plz explain what are the procedure and what are the configuration required before assignment.
Thanks
ManiOK, Thanks for your reply.
Regards
Mani -
How to create configuration of a variant material based on funciton module
Hello, ABAP experts,
I want to create configuration of a variant material based on FM ( MRP3 view, set configurable material and configure the variant ).
I use fuction modules:
CUXM_SET_CONFIGURATION
CUCB_CONFIGURATION_TO_DB
and subsequently commit work.
But the data table was not updated, that is, MRP3 view is still empty.
Can you give me a sample, tell me how to used these FMs.
Thanks and BR.When I call FM , CUXM_GET_CONFIGURATION, the SUBRC = 0, but ET_RETURN get two messages: CUXM1-001 , Overwriting existing configuration, and CUXM1-007, Configuration in target system is consistent and complete.
Can you give me a sample ? -
How to expande multiple table row from a single button
I am trying to create an expanding table that expands multiple rows when a single button is clicked.
So far I have managed to create a table that expands a single row at a time using -
click
this.parent.parent.instanceManager.insertInstance();
I also tried using the following code from an existing woking file that adds a column when a button is clicked -
Table1.HeaderRow._Col3SF.addInstance(0);
Table1.Row1._Col3SF.addInstance(0);
Table1.Row2._Col3SF.addInstance(0);
Table1.Row3._Col3SF.addInstance(0);
I adapted the code to suite my own file -
click
form1.Sub1.Sub3.Table1.Row1.addInstance(0);
form1.Sub1.Sub3.Table1.Row2.addInstance(0);
form1.Sub1.Sub3.Table1.Row3.addInstance(0);
form1.Sub1.Sub3.Table1.Row4.addInstance(0);
form1.Sub1.Sub3.Table1.Row5.addInstance(0);
However I receive the following error -
click Invalid property get operation; subform doesn't have property 'addInstance'
Regards MaxwellI managed to acheive what I needed to do using LCD's Action Builder.
The Action builder makes it so easy to create advanced content.
I selected my button obect for the list, then chose - create add a new instance,
then chose my table from the list.
I now have a table with multiple rows that expand when a single button is clicked, fantastic!
Regards Maxwell -
How to see multiple levels of photo folders?
Using my Apple TV2 and home sharing with iTunes on a Windows xp pro pc, my folder tree for ohotos has 4 levels - my pictures, year, events, sub events; apple tv shows only the year level and groups together alll the photos in the sub folders. Is there any way to have it show the event level folders individually?
Nope, I have the same problem. My first folders are Holidays, Weddings, parties, General, Kids. and then I have 2 subfolders after these. Very annoying. There are other posts about this but I think the only solution is moving to a mac as you can tag pictures. I have Windows 7 and have no intention of moving to a mac yet.
-
How to "Capture Multiple Levels" of a SharePoint 2010 site
Hello! I have an end user I'm trying to support who is trying to update her SharePoint site so she can print the .pdf format. Whenever she tries to "Get Entire Site she gets an authorization failure and it says Error: Nothing Done. We have migrated the site content over from the old intranet page into a SharePoint 2010 site. However, user informed me that she needs to have the ability to print the entire site content and she had been doing this using Adobe Acrobat X Pro. How do I correct the authorization failure message? I'm a SharePoint administrator so please let me know what I need to do on the back end to get this to work. Thanks!
I have seen the same error a number of times. I found that certain domains would not work and give me the error msg. and not allow me to capture a website into PDF format.
http://www.wisconsindot.gov/projects/index.htm generates the 'Authorization Failure' error msg. and will not create a PDF file.
http://www.dot.wi.gov/projects/index.htm and http://www.dot.state.wi.us/projects/index.htm both work fine and create a PDF file as intended.
Do you have an alternative domain you can use for the URL? If so, try that and let me know if it works.
Gregory A. Simonis | DTSD Publications Editor/DTSD Extranet Web Administrator | WisDOT SW Region - Madison, WI -
Multiple level of subtotal in alv
Hi Experts,
Can any one tell me how to get multiple level of subtotal in alv?
I am using function module to get the output.Hi Surajit
can you explain ur requirement
Regards
Prabumanoharan -
Multiple levels in ALV Hierarchy
Hi All
How to display Multiple levels in ALV Hierarchy.
I have header and Item Tables but Under Header Expansions I have to display one more Expansion.
Means Multiple levels.Hi,
I think you can check standard program BCALV_TEST_HIERSEQ_LIST
Regards,
Himanshu -
Configuring multiple level approval workflows
Hi,
1. I would like to know how to configure multiple levels of approval in a workflow.
For example, when a user self registers himself, the request must be sent to level1 manager and after his approval it must be sent to level2 manager for final approval.
2. I would like to know the difference between "provisioning" and "provisioned".
Path : Process definition->task->TasktoObjectStatusMapping
Thanks in advanceHi,
For question no 1.
1.You need to create a approval process.
2.Create a approval task for example "Approve by Manger1". assign this to Manager level 1.If its not static assignment then you need to create task assignment adapter.
3.Create another approval task for exmaple "Approve by Manger 2" assign this to manager level2.
4.Have the 2nd task depends one first one so that until one is completed 2nd one will not start.
For question 2.
Provisioning status refer to when provisioning process is not complete.
Provisioned status refer to when provisioning process is complete.
You can map this status on the completion or rejection of any task.Usually provisioned status is mapped with success of create identity task.
Let me know if you have any more questions.
Regards
Nitesh -
How to get first level BOM material if I know 4th level material code only?
Dear all,
I have 4th level BOM material only. How to find first level ( finish material) BOM material ?
We can find bottom level material easily through CS11 if we know top level material.
But how to find top material if we don't know ? we know only bottom most material.........
Thanks....Kishore,
Multiple runs of "CS15" will help you.
Regards,
Prasobh -
How to get all the characteristics of a variant material?
Hi gusy,
Do anybody can tell me how to find out all the characteristics of a variant material?
I've checked following tables: MARA, CABN, CAWN, KSML, KLAH, AUSP.
Thanks & Regards,
TimHi,
You can use the following BAPI's;
BAPI_OBJCL_GETDETAIL to get the characteristcis of Material
BAPI_OBJCL_CHANGE to change the characteristics.
You can also use the CAWN, CAWNT,AUSP tables to find these characteristics.
Also:
Try this....
WSTN3_GET_CHAR_PROFILE
Reward if useful,
Cheers,
Chandra Sekhar. -
I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?
If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results. -
How to send multiple material in our own message type
Dear All,
Any idea about how to send multiple material in our own message type,In my outbound i have created a message type but able to send only one material through program. If i give range of material its in error status 26 in WE02 and failed to send.
Help me ASAP.
Thanks & Regards,
Arun.hi Gordon,
I want to receive the IDOC data for message type WPUUMS from a java server. Currently i am working on sample values for segments
E1WPU01
E1WPU02
E1WPU03
E1WPU04
E1WPU05
E1WXX01
I am facing problems in passing the correct values .
Its throwing a error message status 51.(Application document not posted) IDoc not fully processed.
can you help me with some dummy data for all the fields in the above segments.
reply ASAP
regards
arun
Edited by: Arun Kumaran on Aug 22, 2008 3:33 PM -
How to create multiple folder levels of connections
Is it possible to create multiple levels of folders in the Connections tab. For example, I have 3 projects and each projects have dev, qa, prod. The documentations that come with sqlDeveloper2.1 only tells how to create 1 level of folder.
Please share your suggestion if any.
Thanks.I also tried this through the config file ~/.sqldeveloper/system2.1.0.63.73/o.sqldeveloper.11.1.1.63.73/product-preferences.xml.
Seems to me that nesting additional list elements for subfolders does not work. -
How to use the 'Decision between multiple alternatives' Process variant
Hi ,
Can anyone tell me how to use the 'Decision between multiple alternatives' Process variant in BI 7 Process chains ?
The requuirement is that I have a DSO eg DSO 1 from which i have to load DSO 2 and DSO 3 . Now if the number of Records in DSO 1 are < 100 i will load DSO 2 from DSO 1 else i will load DSO 3 from DSO 1 .
So in the PC i have used a 'ABAP Program' variant (which counts the number of rows in DSO 1) after loading DSO 1 and after this 'ABAP Program' Variant , i have used the 'Decision between multiple alternatives' Process variant. Problem is it is giving me only some some system fields in the formula , like sy-datum or sy-timlo , which are of no use here .
It would be great if i can receive some help here .
--Devrajin RSPC you create a ABAP processing type "ending with specific values".
We use true or false for things as you specify.
your abap program should return a true or a false to indicate which of the situations is applicable.
Is this helpful?
Marco
Maybe you are looking for
-
TS3992 Backing up to iCloud doesn't happen automatically
Hi, I had a warning to say that my I-Pod hadn't been backed up to iCloud for 6 weeks. After much effort I discovered how to set up automatic backups to iCloud and, as I expected, automatic backup to iCloud has already been set up. In the settings on
-
IPod Touch not recognized by Vista
I just purchased a new Dell 1530 w/Vista Premium..When I tried to synch my iPod touch w/the laptop the computer did not recognize the iPod. My previous computer was a Dell w/XP and I had no problem. Any suggestion? I love my iPod and would hate to ha
-
Hello My page design has all the components in the cells of a table. I am designing my menus/sub-menu in FW. The changing body of each page is in all the sections of the table below the row with the menus. I would like to lock all the sections of the
-
Regarding use of DDL in PL/SQL
Hai, Can someone help me in understanding why we can't use DDLs in PL/SQL. I will be really thankful to you. Gursimran
-
Dump error in mb1a(SAPSQL_ARRAY_INSERT_DUPREC)
Dear Friends, We got a dump error(SAPSQL_ARRAY_INSERT_DUPREC) when relesing particular material of the production order in mb1a. the detail error is as follows. ABAP runtime errors SAPSQL_ARRAY_INSERT_