How to Export full street address of the contacts from AD OU
How to Export full street address of the contacts from AD OU
Break down the one liner suggested by Chen . What do you see when you run the below :
Get-ADUser -Searchbase 'OU=XYZ,DC=XYZ,DC=XYZ' -Filter * -Properties *
You will have to replace the OU path in the above.
Once you see the Users are an output of the above, try below :
Get-ADUser -Searchbase 'OU=XYZ,DC=XYZ,DC=XYZ' -Filter * -Properties * |
Select SamaccountName, @{n="Full Address";E={[String]::Join(';',$_.StreetAddress , $_.l, $_.PostalCode, $_.Country)}}
If you are able to see the objects till this point then only you will get those in your CSV. These are nothing but basic steps to follow when someone gives you a solution.
Hope this helps.
Knowledge is Power{Shell}
DexterPOSH
My Blog
Similar Messages
-
How do I transfer Yahoo e-mail addresses to the Contact app?
How can I transfer my e-mail addresses from my Yahoo address book to the Contact app on the main screen of the iPod touch? If I go into my Yahoo mail on the iPod, the addresses are there but if I click directly on the Contacts app on the main screen it's blank. I'm just setting up my new IPod touch and I've read and re-read the synch directions over and over but other than just plugging it in there's nothing that tells me HOW to move the addresses to the "Contact app" where I'd like to be able to access them from. I'm thinking there must be a better way than to enter everything manually...
Thanks in advance for your help!Now I have and it worked perfectly!!! Thanks very much. When I went into the iTunes the first time, I missed all the tabs across the top of that screen. For a beginner, the whole iTunes thing is way to busy! My opinion ofcourse. Thanks again!
-
How to assign static ip address to the server having solaris 10. i.e. nge0
hi,
how to assign static ip address to the server having solaris 10. i.e. nge0 i.e. 192.168.3.125 ipshold be persistantt across reboots. what steps do i need to follow to put all information including gateway,netmask etc..Also i want to integrate one init script ..can i integrate it using /etc/init.d/<service name> like linux. and do chkconfig on it?i am not getting complex procedure of SPF and FMRI etc..can u help me?Create a file in your /etc directory called hostname.nge0. Add the hostname of your system to this file. In your /etc/hosts file, assign the static IP address you want to the same hostname. You can then disable and enable the network-physical service to configure the network interface:
svcadm disable network-physical
svcadm enable network-physical -
How to export string in CDATA with the jaxb xml writer?
How to export string in CDATA with the jaxb xml writer?
It read CDATA no problem but it is lost on write.Found it:
### THIS WORKS WITH SUN JAXB REFERENCE IMPLEMENTATION. ###
(Not tested with any other)
In the xsd, you must create a type for your string-like element.
Then associate a data type converter class to this new type, which will produce CDATA tags.
Then you must set a custom characterEscapeHandler to avoid the default xml escaping in order to preserve the previously produced CDATA tag.
Good luck.
-----type converter-----
import javax.xml.bind.DatatypeConverter;
public class ExpressionConverter {
* Convert an expression from an XML file into an internal representation. JAXB will
* probably have already stripped off the CDATA encapsulation. As a result, this method
* simply invokes the JAXB type conversion for strings but does not take any other action.
* @param text an XML-compliant expression
* @return a pure string expression
public static String parse(String text) {
String result = DatatypeConverter.parseString(text);
return result;
* Convert an expression from its internal representation to an XML-compliant version.
* This method will simply surround the string in a CDATA block and return the result.
* @param text a pure string expression
* @return the expression encapsulated within a CDATA block
public static String print(String text) {
StringBuffer sb = new StringBuffer(text.length() + 20); //should add the length of the CDATA tags + 8 EOLs to be safe
sb.append("<![CDATA[");
sb.append(wrapLines(text, 80));
sb.append("]]>");
return DatatypeConverter.printString(sb.toString());
* Provides line-wrapping for long text strings. EOL indicators are inserted at
* word boundaries once a specified line-length has been exceeded.
* @param text the string to be wrapped
* @param lineLength the maximum number of characters that should be included in a single line
* @return the new string with appropriate EOL insertions
private static String wrapLines(String text, int lineLength) {
//wrap logic, watchout for quoted strings!!!!
return text;
------in caller----
Marshaller writer = ......
writer.setProperty("com.sun.xml.bind.characterEscapeHandler", new NoCharacterEscapeHandler());
-----escaper-----
import java.io.IOException;
import java.io.Writer;
import com.sun.xml.bind.marshaller.CharacterEscapeHandler;
public class NoCharacterEscapeHandler implements CharacterEscapeHandler {
* Escape characters inside the buffer and send the output to the writer.
* @param buf buffer of characters to be encoded
* @param start the index position of the first character that should be encoded
* @param len the number of characters that should be encoded
* @param isAttValue true, if the buffer represents an XML tag attribute
* @param out the output stream
* @throws IOException if the writing process fails
public void escape(char[] buf, int start, int len, boolean isAttValue, Writer out) throws IOException {
for (int i = start; i < start + len; i++) {
char ch = buf;
if (isAttValue) {
// isAttValue is set to true when the marshaller is processing
// attribute values. Inside attribute values, there are more
// things you need to escape, usually.
if (ch == '&') {
out.write("&");
} else if (ch == '>') {
out.write(">");
} else if (ch == '<') {
out.write("<");
} else if (ch == '"') {
out.write(""");
} else if (ch == '\'') {
out.write("'");
} else if (ch > 0x7F) {
// escape everything above ASCII to &#xXXXX;
out.write("&#x");
out.write(Integer.toHexString(ch));
out.write(";");
} else {
out.write(ch);
} else {
out.write(ch);
return; -
How can I delete the home address of the contact person
Hi Experts,
I want delete the home address of the contact persons in the ERP.
Which data and where can you found it:
In Tx xd02 in the general data of customer - register "contact person" and then button "home address".
There I want delete all fields. When I looked in F1 - technical information I don't get the information in which table the data are included. I know only the structure.
I think the general data of the contact person I have to look in the table knvk.
The private and the business email address I can find in the table ADR6.
In the table knvk there is a field "address number". I know when there is a number then the contact person has a home address and when this field is empty then for this contact person isn't maintain a home address.
Could I delete this field "address number" in the table knvk? Is then the home address automatically deleted?
I don't know how can I delete this field. Can anybody tell me how can I do this? I looked in the Tx xd99 this field isn't available there.
Or does anybody know how can I delete the home address of the contact persons on another way?
Thank you in advance.
Best regards, JasminHi,
I am sorry, I forgot to say I don't want delete only one home address. Yes, you are right, then I could delete it manually.
But I want to delete all private addresses, so I should have a tool for mass deletion.
Does anybody know how can I do this?
Best regards, Jasmin -
Mac Mail displays full email addresses instead of contact name
I use the Mail application on my MacBook for managing multiple email accounts and use the Contacts application to manage my address book (self explanatory).
For example: I have saved PayPal's email address ([email protected]) into my address book as "PayPay" because of the high number of emails I receive from them. In Mail, each email I have received is displaying the full email address of the sender, rather than their address book name (whether it be a company or friend/relative) and this is making it to spot senders while scrolling.
Is there a setting where if the email address is in the Contacts app, the name of that particular contact appears rather than the full address?whether your number or email address is desplayed depends on how you have Caller ID set.
Settings -> Messages ->Receive At ->Caller ID (chose what you want displayed) -
How to export a data as an XML file from oracle data base?
could u pls tell me the step by step procedure for following questions...? how to export a data as an XML file from oracle data base? is it possible? plz tell me itz urgent requirement...
Thankz in advance
BalaSQL> SELECT * FROM v$version;
BANNER
Oracle DATABASE 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS FOR 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
5 rows selected.
SQL> CREATE OR REPLACE directory utldata AS 'C:\temp';
Directory created.
SQL> declare
2 doc DBMS_XMLDOM.DOMDocument;
3 xdata XMLTYPE;
4
5 CURSOR xmlcur IS
6 SELECT xmlelement("Employee",XMLAttributes('http://www.w3.org/2001/XMLSchema' AS "xmlns:xsi",
7 'http://www.oracle.com/Employee.xsd' AS "xsi:nonamespaceSchemaLocation")
8 ,xmlelement("EmployeeNumber",e.empno)
9 ,xmlelement("EmployeeName",e.ename)
10 ,xmlelement("Department",xmlelement("DepartmentName",d.dname)
11 ,xmlelement("Location",d.loc)
12 )
13 )
14 FROM emp e
15 , dept d
16 WHERE e.DEPTNO=d.DEPTNO;
17
18 begin
19 OPEN xmlcur;
20 FETCH xmlcur INTO xdata;
21 CLOSE xmlcur;
22 doc := DBMS_XMLDOM.NewDOMDocument(xdata);
23 DBMS_XMLDOM.WRITETOFILE(doc, 'UTLDATA/marco.xml');
24 end;
25 /
PL/SQL procedure successfully completed.
. -
how to export All computer list with operating system from AD and all attributes like disable or enable and OU location also?
I have tried with dsquery below but status is not showing there.
dsquery * -filter "(objectCategory=computer)" -attr name operatingSystemlast logon user name - not really stored (or lined) with computer object. However, you can get this info during the logon process or from the computer. Here is method:
http://portal.sivarajan.com/2010/07/user-profile-and-os-info-powershell.html
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights. -
My contacts have been transferred from my iPhone5 to iPhone6 . I now need to back them up in a new PC in a separate address book How can I do it without adding all contacts from Outlook when I synch back from iTunes ?
From the OP: "My old computer got a virus and when that happened all my music was lost. "
They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod. -
How do you delete the contacts from "All on My Mac"
How do you delete the contacts from "All on My Mac"? i have moved everything to iCloud and want to delete the contacts on my mac.
Signing out will not delete them from iCloud. Do it and read the message. It will give you the option to store address book contacts locally or just in iCloud. It will tell you that they will be available in iCloud when you sign back in.
In Addition, signing your mac out of iCloud does not sign your other devices out of iCloud. Any info in iCloud will still be available to other devices.
You can also access iCloud from the website https://www.icloud.com , which you can access from any computer at any time. -
How do I upload the contacts from my iPhone 5S to the Bluetooth device on my Toyota RAV4? The car manual says to consult the phone's Bluetooth instruction manual, but I don't have a manual for that.
That is very strange... I wonder if it has something to do with the firmware or some sort of error. I haven't ran into this but at the shop I work at I've ran into several firmware errors on iPhone 4 all the way through the 5s. Maybe its something as simple as putting a different part of the code into iTunes... I know you can something of this extent. I would look up error 1669, I know you have tried a number of things but look it up on the forum and see what fixes are available so that you may be able to restore it properly without all this garbage you are running into. Just a thought for you.
-
How can I get iTunes to display the tracks from a CD in their original (album) order?
To be absolutely honest, I don't really understand what this box is for, so I shall just use it to repeat and expand on my question. (I have already sent a "Feedback" comment on the same topic).
How can I get iTunes to display the tracks from a CD in their original (album) order?
It seems to me that there is something very basic wrong with the way iTunes handles CD Tracks.
Professionally produced CD tracks are seldom if ever in a randomised order. Why then does iTunes seem unable to display the tracks in the order they appear on the original CD source - whether from a personally owned CD or from a download from the iTunes Store?
Some music demands a specific, non-alphabetic sequence in order to make sense. Why does it seem that iTunes only offers Alphabetic, or reverse alphabetic order - both of which make a nonsense of the original, often intended order of tracks?
Why not replace the so-called "cover-art" in the bottom left hand corner if the iTunes window - which, while it may look attractive to some, gives the barest of information concerning the original disc, with a list of the original CD tracks in their original order, so that the user can easily reestablish the order in which they should be played.
As I would expect legibility might be a problem with doing this, why could not the original contents, (in their original order), at least, be displayed when the "cover art" is double clicked-on - the result of which at present gives me an enlarged version of the "Cover Art". While on the subject of the contents of the source disc, what about all the album notes which someone takes trouble to write in order to increase the appreciation of the music on the CD and the listener's general background knowledge of the artists involved. Such notes, it seems to me, have considerable intrinsic value in their own account. I would, I think, normally be prepared to buy such "Sleeve notes" - so long as a "taster" was supplied (as it is for the music) - for something like the cost of a single 'Tune" on iTunes.
These two aspects let Apple iTunes down enormously, in my opinion. I think that by chopping even quite protracted sequences of music up into bits does no one any favours - except perhaps Apple's already quite substantial bank balance. People have to be aware that two and a half, to three and a half minutes is a very short time to develop a piece of worthwhile music, and that there are many, many composers, not all of whom are alive today who have written music that huge masses of mankind value for the enrichment of their lives and the human condition in general.
Please make the viewing of iTunes tracks in their correct order by default possible. By all means have the alphabetical variations available as offering a different approach to the music, but not the sole approach to it - PLEASE.
Frustratedly yours
Alan Whitaker
PS I work at my old 24" iMac Intel Core 2 machine which runs OS "Tiger" - because it is more beautiful to look at, the screen is more pleasant to work on, and because, in some ways it is more capable (it will run FreeHand MX without needing a "patch"), than my more recent 21.5" which runs "Snow Leopard". (I don't find it that much slower, either).Dear Mike
Thanks for the support. I am utterly amazed that after all the hype about how good iTunes is that it cannot play a downloaded CD in the correct order, and that what that order should be is not available directly from within one's own iTunes installation. (I know that one can go back to the iTunes Store to check what the order should be, but having downloaded the tracks surely iTunes is clever enough to retrieve this important information.
My iTunes to differ from yours in that I have also noticed that it seems unable to download copies of my "talking books" in the correct order either. But in my case it downloads them - from a CD - in order, but with the first track downloaded first - so that it appears at the bottom of the column of tracks so that it would get played last! (At least this is, while being inexplicable, a relatively "logical" bit of blundering and because of this is relatively easy to put right!).
I like many genres of music, some of which are not really programmed except perhaps by the artist performing them. I know that Frank Sinatra was very careful to programme his album songs to obtain a particular effect and in relation to the keys of the music. iTunes presumes to know better.
Film scores may be totally randomly put together, in some cases, but in others the order is vital to one's appreciation of the music as a whole and how it relates to the plot of the film.
In symphonic music most works are divided into sections and are conceived by the composer that way. Some individual sections may gain a life of their own if played separately, but they are never complete in the sense that the composer envisaged them without being placed in their proper context.
Opera and probably most choral music too, is similar except that the words may well become meaningless if the order is changed at the whim of a piece of ill-written computer code, while ballet music has to be heard totally within its sequential context or it becomes meaningless.
Finally, I would venture that iTunes, by jumbling up the order of the tracks as recorded on a CD, does an immense disservice, not only to the music on a particular CD, but to music in general, by expressing everything in terms of "Songs" - which it seems to interpret as stand-alone items of between 2 and 4 minutes whatever the genre. Even the way the iTunes publicity speaks of how many "songs" it can store instead of how many minutes or hours of recorded sound. This has to be another brick in the wall of "dumming-down" of people's expectations, and the shortening of their attention spans.
I don't know about anyone else, but I feel betrayed by Apple over this. Perhaps the look, feel and general presentation of an item are not the most desirable features of a consumer product. Maybe it should be judged more on it fitness for the purpose for which it was sold. There is one other possibility - that Apple are trying to redefine "Music" - and that everything that lasts longer than about 3.5 minutes or is in the form of what could for want of a better term be called symphonic in the broadest sense is something else - not "Music" within Apple's new definition, at all!
Well that's off my chest! now I can get down to creating some sort of order in my iTunes Libraries, knowing that I have to reconsult all the sources in order to confirm the source playing order.
Anyway thanks again. At least I know that it is not just me
alanfromthatcham -
How do I get the contacts from my mac to sync with Icloud? I need to back up my phone since I will be receiving a new one tomorrow and the icloud contacts are not the same as the ones on my mac. Help me
OS X Lion. 10.7. Your profile says your running 10.6.8, which is Snow Leopard. You need 10.7 to use iCloud with your Mac.
-
copy my contacts list to his iPad. We both have Apple ID's and we share a PC. How do i copy the contacts from my iPhone, iCloud or iPad to his iPad 1?
The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895) -
How to restore the contacts from iPad 2 to iPhone 5? I lost some of my contacts after deleting a closed email account; however I have them all in my iPad!
Do you see those in www.icloud.com? Yes- sign in to icloud on the phone.
No- how did you get those to the ipad?
Maybe you are looking for
-
HT1766 how do i back up my iphone
i need to bavk up my iphone and then upload a new software and dont have a clue how to do this? need help
-
Accidentally uploaded entire photo library - 18,000 photos - to one Book. How do I get them out???
Help! I accidentally uploaded my entire photo library -- 18,000 photos -- to the Book I am working on. Now everything runs slow, and I can't figure out how to get them out quickly. It takes several seconds to just delete one photo. I don't want to de
-
Music Store Half Working - Ideas Please
I can sorrta use the Music Store, but only half way. If I click on Music Store on the left, it will eventually give me the 'home page' for the store. Any time I try to Sign In or play a song that needs to be authorized, I get this error - Couldn't Co
-
Hide repeating column in table
I have a table wrapped in a subform which allows the user to add/delete multiple rows, I want to use a button to hide a column in the table once the use has finished adding/deleting rows. I have tried:- xfa.resolveNodes("Tables.Table1.Row[*].deleteBt
-
I had go pro footage in last import but when I imported next files it disappeared. Does not show up in last 12 months but deleted files from initial import are in the trash. Any suggestions?