How to export the created Pivot table by using Power Pivot into separate excel file in the same format?

Hi PowerPivot experts,
I have created more than 60 pivot tables in multiple sheets by using PowerPivot work book. now i want delivery all the pivot table in excel document to my end user by email.
I want send only the Pivot tables which i created using PowerPivot data model instead of sending the whole model file since its very heavy.
I have tried with export option in Excel 97-2003, its works fine but not getting exact pivot format which i created and its displays as value.
My aim to send pivot table that i created format but not whole file with source data.
I would be really grateful if advise me to fix it out.

Hi Robert,
I don't think it is a good idea to deliver all PivotTable report to end user via E-mail, and SQL Server PowerPivot for Excel doesn't support to deliver PivotTable report to end user without PowerPivot data inside in the data model. For example, I suppose
we create a PivotTable to display the SalesAmount of US in pervious years(eg:2012, 2013, 2014), how can we dynamic show the value based on end user selection without PowerPivot data model data(The PivotTable report don't have data source)?
So, one workaround that we can create a shared folder to store all of PowerPivot report for all of end user in the domain environment, and then inform end users to copy the PowerPivot reports what they want via E-mail.
If the end users aren't in domain environment, we can implement the VPN soltion to achieve this.
Regards,
Elvis Long
TechNet Community Support

Similar Messages

How to sum only the positive numbers in a Pivot table when using Power Pivot

Hi, I have this schema:
…and this Pivot:
How do I get this result from PowerPivot.
If I only use normal Excel Pivot I could use Calculated Field and get the wanted result in a snatch.
But I guess the problem with using PowerPivot in this scenario is a context or/and a aggregation problem?
Here is the formula I try to use (I have also tried the FILTER function but couldn’t get it right):
TRUE DEMAND (Forecast- Stock>0) =
CALCULATE([TOTAL DIFF (FORECAST-STOCK)],
[TOTAL DIFF (FORECAST-STOCK)]>0)
Here is my ExcelFile:
https://onedrive.live.com/redir?resid=B7906DD091ACC085!357&authkey=!AJN_r_1NCP4thrE&ithint=file%2cxlsx
Any suggestions?
Best Regards
Tommy

Hi Tommy,
sorry, a few words are not enough.
This post does explains it in detail:
http://sqlblog.com/blogs/marco_russo/archive/2010/01/03/how-calculate-works-in-dax.aspx
Imke

Upload an excel file in the server with a background job

I am trying to upload an excel file in the server, but i only can upload flat files, i can upload files in local with the function ALSM_EXCEL_TO_INTERNAL_TABLE, can i use this function reading an excel file in the server, or is there another possibility of uploadinging an excel file in the server with a background job ?
thanks in advance

Hi
First read the file from the server to some temporary place at presentation layer and then open it. And if required, save it to the server afterwards. To read/write files to application server you can use:
1. Statements "OPEN DATASET/CLOSE DATASET".
2. There are some FMs for server file operations, like "C13Z_FILE_UPLOAD_BINARY" and "C13Z_FILE_DOWNLOAD_BINARY".
*--Serdar

Power Query; How do I reference a Power Pivot table from a Power Query query

Hi,
It's pretty awesome how you can define Extract Transform and Load processes within Power Query without having to type in a single line of code. However how do I reference a Power Pivot table from a Power Query query to avoid me repeatedly accessing
the same data source (CSV) file with a view to increasing performance?
We are aware of the reference sub menu option with Power Query. However the new query created by the "reference" option still seems to refresh data from the data source (CSV) rather than just referencing the base query. Is this understanding
correct? There does seem to be a lot of hard disk activity when re-running the new query which is based on a base query rather than a data source. So we were hoping the new query would just need to reference the base query in memory rather than rescanning
the hard disk. Is there any way to ensure that the reference query just rescans the base query in memory?
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Hi Kieran,
This sounds like something to be suggested for a future release. At the present time, Power Query will always re-run the entire Power Query query when refreshed. The Reference feature is analogous to a SQL view whereby the underlying query is always re-executed
when it's queried, or in this case refreshed. Even something like using the Power Query cache to minimise the amount of data re-read from the disk would be helpful for performance but the cache is only used for the preview data and stored locally.
It would be a good idea to suggest this feature to the Power BI team via the feedback smiley face.
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com, Twitter:
@nimblelearn
Hi Michael,
Glad to hear from you about this. And thanks to Kieran for bringing a very good valid point to debate. Will be glad to see this in future release.
- please mark correct answers

How to get pivot table by using dates

Hi,
How to get pivot table by using dates in column.
Below is the sample table and its value is given.
create table sample1
Order_DATE       DATE,
order_CODE       NUMBER,
Order_COUNT   NUMBER
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,232);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,935);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,43);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,5713);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('30-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,11346);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),1,368);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),2,1380);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),3,133);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),4,7109);
Insert into sample1 (Order_DATE,order_CODE,Order_COUNT) values (to_timestamp('29-SEP-12','DD-MON-RR HH.MI.SSXFF AM'),5,14336);
select * from sample1;So how to get the data like below.
          order_date
order_code 30-sep-12 29-sep-12
1 232 368
2 935 1380
3 43 133
4 5713 7109
5 11345 14336

Using the extra data I inserted in my previous reply:select ORDER_CODE,
SUM(DECODE(extract (month from ORDER_DATE),1,ORDER_COUNT,0)) JAN,
SUM(DECODE(extract (month from ORDER_DATE),2,ORDER_COUNT,0)) FEB,
SUM(DECODE(extract (month from ORDER_DATE),3,ORDER_COUNT,0)) MAR,
SUM(DECODE(extract (month from ORDER_DATE),4,ORDER_COUNT,0)) APR,
SUM(DECODE(extract (month from ORDER_DATE),5,ORDER_COUNT,0)) MAY,
SUM(DECODE(extract (month from ORDER_DATE),6,ORDER_COUNT,0)) JUN,
SUM(DECODE(extract (month from ORDER_DATE),7,ORDER_COUNT,0)) JUL,
SUM(DECODE(extract (month from ORDER_DATE),8,ORDER_COUNT,0)) AUG,
SUM(DECODE(extract (month from ORDER_DATE),9,ORDER_COUNT,0)) SEP,
SUM(DECODE(extract (month from ORDER_DATE),10,ORDER_COUNT,0)) OCT,
SUM(DECODE(extract (month from ORDER_DATE),11,ORDER_COUNT,0)) NOV,
SUM(DECODE(extract (month from ORDER_DATE),12,ORDER_COUNT,0)) DEC
from SAMPLE1
where trunc(order_date, 'YY') = trunc(sysdate, 'YY')
group by order_code
order by order_code;
ORDER_CODE JAN FEB MAR APR MAY JUN JUL AUG   SEP   OCT NOV DEC
         1   0   0   0   0   0   0   0   0   600   600   0   0
         2   0   0   0   0   0   0   0   0 2315 2315   0   0
         3   0   0   0   0   0   0   0   0   176   176   0   0
         4   0   0   0   0   0   0   0   0 12822 12822   0   0
         5   0   0   0   0   0   0   0   0 25682 25682   0   0Now a bit of explanation.
1) Whenever you pivot rows to columns, no matter what version of Oracle and no matter what method you use, you have to decide in advance how many columns you are going to have and what the names of the columns are. This is a requirement of the SQL standard.
2) I use the WHERE clause to get just the data for this year
3) With EXTRACT, I get just the month without the year.
4) Using DECODE, I put every month's data into the correct column
5) Once I do all that, I can just GROUP BY order_code while SUMming all the data for each month.

How to create a table with datatype blob and insert a pdf file (ravi)

how to create a table with datatype blob and insert a pdf file,
give me the explain asap
1.create the table?
2.insert the pdffiles into tables?
3.how to view the files?
Thanks & Regards
ravikumar.k
Edited by: 895044 on Dec 5, 2011 2:55 AM

895044 wrote:
how to create a table with datatype blob and insert a pdf file,
give me the explain asapPerhaps you should read...
{message:id=9360002}
especially point 2.
We're not just sitting here waiting to answer your question as quickly as possible for you.

How to create a table to use in webdynpro ABAP

Hi Guys,
Can anybody let me know how to create a table to use in webdynpro ABAP. I am new to ABAP. It would appreciable if i get useful answer. Thanks In Advance
Regards
Ravi

Hi! You can use transaction code SE11. Please refer to http://help.sap.com/saphelp_nw70/helpdata/en/6c/f2934259a5c66ae10000000a155106/frameset.htm
Please note that table name should start with 'Y' or 'Z' - by SAP naming conventions object names starting with 'Y' and 'Z' are reserved for customer application development.
Please reward points if helpful

How do I automatically create bookmarks in adobe using the Scanjet pro 3000 s2?

How do I automatically create bookmarks in adobe using the Scanjet pro 3000 s2?

Does the file you are writing have a timestamp in it? If so you could read the timestamp from the last time it was written and see if the day has changed, handling the name of the file appropriately. The easiest way to record the timestamp is probably to write the timestamp as the number of seconds that have elapsed since 12:00 am on Firday January 1st 1904 in UT. The "Get Date/Time in Seconds" function will give you this value.
Message Edited by jmcbee on 03-05-2009 12:56 PM
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

UCCX 8 - Dramatic change in the Create File Document step that is used by the Create XML Document step in order to read an XML file

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
For the last 5 years (and in IPCC3.x/4.x,UCCX/5.x/7.x) I've used the same basic subflow to read a XML document that contains holiday dates where the queue should be closed. I've re-used this script on 20+ client installs and it's always worked. The structure of the script allows you to pass the path and filename of the XML document as parameters to the subflow. (The document is in the repository)
I loaded this script in UCCX 8.0.2 recently and it crashed with a Java.IO error. It looked like it was trying to read the file system directly and not the repository. (In the Linux appliance model this kind of makes sense but why is the step trying to read the file system directly?)
So I open a TAC case (SR# 615243125) and TAC tells me that the method of using the Create File Document step is not supported anymore and that I should specify the filename directly in the Create XML Document step
The problem that I see (aside from having to edit all my scripts that use XML files) is that the Create XML Document step is looking for the input to be a type DOCUMENT and not a type STRING. This seems to imply that I have to hardcode the document in each script that I deploy for a customer. When it was a string it was easy to construct the full file path from parameters and pass to the subflow.
Questions to the group
#1 Am I missing something here?
#2 Do you assume that you'll be able to load a script that worked fine in UCCX 7 into UCCX 8 and that it should completely function when you're doing everything according to the step reference documentation.
#3 Cisco didn’t document this in any way that I can find.
#4 How can you use the Create XML Document step in a fashion that would let you construct the path of the file and the filename previously in the script so you could pass it to a subflow ? It would seem this functionality has been killed in UCCX 8
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
(Background)
Create File Document Step
The input filename is a STRING, could be an explicit path and filename in the repository or a variable that represents that path and string
The output of this step is a DOCUMENT to be used in the Create XML Document step
The string FILE_FullPathHolidayFiles references en_us\folderName\documentName.xml
The document was properly uploaded into the repository only, NOT trying to directly read c:\foo\blah…
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The create XML document input can only be a type DOCUMENT

#1 Am I missing something here?
You are mixing two different issues together here.
The Create File Document step is indeed not needed or supported for creating an XML document. That is why there is a unique step; to trigger XML parsing within the MIVR subsystem.
Accessing the file system is restricted to a single folder within the VOS model (i.e. 8.0+). This folder is not backed up, replicated, or cleaned up automatically. It was intended to give developers some FS access as a temporary swap location only.
#2 Do you assume that you'll be able to load a script that
worked fine in UCCX 7 into UCCX 8 and that it should completely
function when you're doing everything according to the step reference
documentation.
Assume nothing; read the documentation and attend one of the dozens of partner training sessions that CCBU put on advising of the upcoming changes.
#3 Cisco didn’t document this in any way that I can find.
You're right, I guess, on the Create File vs. XML Document step. AFAIK Cisco never wrote a notice into the Step Reference Guide explicitly stating that you cannot use the Create File Document although the documentation seemed pretty clear to me without it. File system restrictions are documented in the 8.0 release notes.
Scripting and Development Series: Volume 2, Editor Step ReferenceUse the Create XML Document step to create a logical document that maps a document to another document variable (where the document has already been pre-parsed as an XML document and is ready to be accessed by the Get XML Document Data step).Use this step before the Get XML Document Data step to obtain data from a document formatted using the Extensible Markup Language (XML).
#4 How can you use the Create XML Document step in a fashion that would
let you construct the path of the file and the filename previously in
the script so you could pass it to a subflow ? It would seem this functionality has been killed in UCCX 8
No it hasn't; just concatinate a string to build the Source Document parameter the step needs. Example: "DOC[" + myFilePath + "]"

HT1338 Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?

If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License.

Error on clicking "Report Data Source" in library created using power pivot template

Hi,
On clicking on "Report Data Source" in library created using power pivot template i am getting below exception. Can some one help me in understanding the root cause / fix it.
Error being shown: Microsoft.ReportingServices.SharePoint.SharedService.Client.RecoverableCommunicationException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1).
If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 8.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css">  System.ServiceModel.ProtocolException:
The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024
bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS
8.0 Detailed Error - 500.19 - Internal Server Error</title> <style type="text/css">  System.Net.WebException: The remote server returned an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout) -
-- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ValidateRequestReplyResponse(HttpWebRequest request, HttpWebResponse response, HttpChannelFactory`1 factory, WebException responseException, ChannelBinding channelBinding)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown
at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.get_IsWebServiceEnabled()
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.<>c__DisplayClass8`1.<ExecuteOnApplication>b__6(IReportServiceManagement proxy, Int32 dummy)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.ExecuteOnChannel[T](String siteUrl, String xmlNamespace, Action`2 method, IChannel channel, Int32 maxFaultSize)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.HandleExecuteOnChannel[T](String siteUrl, String xmlNamespace, Action`2 method, SPServiceLoadBalancerContext loadBalancerContext) -
-- End of inner exception stack trace ---
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.HandleExecuteOnChannel[T](String siteUrl, String xmlNamespace, Action`2 method, SPServiceLoadBalancerContext loadBalancerContext)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.ExecuteOnApplication[T](String operationName, String siteUrl, String xmlNamespace, Action`2 method)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceApplicationProxy.Invoke[T](SPServiceContext serviceContext, String operationName, String siteUrl, String xmlNamespace, Guid serviceInstanceId, Action`2 method)
at Microsoft.ReportingServices.SharePoint.SharedService.Client.ReportingWebServiceClient.Execute[TResult](String methodName, Func`2 action)
at Microsoft.ReportingServices.SharePoint.UI.BaseRSLayoutPage.ValidateReportServerConnection(SrvProxy rsProxy)
Followed steps from below link :
http://www.mssqltips.com/sqlservertip/3004/getting-started-with-power-view-reports-with-sharepoint-excel-and-sql-server/
Thanks,
Venugopal

Hi Venugopal,
Please refer to the blogs below and see if it works for your case:
http://sharepointerthilosh.blogspot.com/2013/10/sharepoint-2013-reports-unexpected.html
http://badalratra.wordpress.com/2014/03/13/error-the-content-type-texthtml/
To create a Power View report, start Power View from a
data model file in SharePoint Server 2010 or 2013. Models, or connections to models, can be in a SharePoint Server document library or in a
Power Pivot Gallery, a special purpose SharePoint Server document library that provides rich preview and document management for published Microsoft Excel workbooks that contain data models.
Please refer to the links below to get report in Power View in SharePoint server:
http://office.microsoft.com/en-in/excel-help/power-view-in-sharepoint-server-create-save-and-print-reports-HA102834736.aspx
http://office.microsoft.com/en-in/excel-help/create-a-connection-to-a-data-model-for-power-view-HA102835737.aspx
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

How do I save a PDF as an excel file when the PDF is horizontal. Adobe tries to rotate the page, but the data is entered in an horizontal format.

How do I save a PDF as an excel file when the PDF is horizontal. Adobe tries to rotate the page, but the data is entered in an horizontal format.

Thanks for the quick reply. I figured out how to get the desired results by using tagging. For anyone who may reference this post in the future, I went to "Customize" in the top right corner of Adobe, then selected "Create new tool set...", looked under "accessiblity and found the "tag" option. Hit ok, tag is added to the toolbar. Then I highlighted the dataset in the PDF that was relevant to the output format, then clicked "tag", saved as spreadsheet. Sorry I can't provide more details on how tagging works or if there's a more elegant solution available, but I'm sure one's out there.

How to download values in an internal table into an excel file

is there any fn module to download the values in an internal table into an excel file..

hi
the function module "GUI_DOWNLOAD" downloads the data from
an internal table into a file (can be xl, dat ,doc etc) .
Plz follow the usage below ;
Parameters : pa_pfile LIKE rlgrap-filename OBLIGATORY.
Data : lv_filename TYPE STRING.
lv_filename = pa_pfile.
CALL FUNCTION 'GUI_DOWNLOAD'
   EXPORTING
   BIN_FILESIZE                  =
     FILENAME                      = lv_filename
     FILETYPE                      = 'ASC'
   APPEND                        = ' '
    WRITE_FIELD_SEPARATOR         = 'X'
   HEADER                        = '00'
   TRUNC_TRAILING_BLANKS         = ' '
   WRITE_LF                      = 'X'
   COL_SELECT                    = ' '
   COL_SELECT_MASK               = ' '
   DAT_MODE                      = ' '
   CONFIRM_OVERWRITE             = ' '
   NO_AUTH_CHECK                 = ' '
IMPORTING
   FILELENGTH                    =
   TABLES
     DATA_TAB                      = tb_download         " table data to b downlaoded
EXCEPTIONS
    FILE_WRITE_ERROR              = 1
    NO_BATCH                      = 2
    GUI_REFUSE_FILETRANSFER       = 3
    INVALID_TYPE                  = 4
    NO_AUTHORITY                  = 5
    UNKNOWN_ERROR                 = 6
    HEADER_NOT_ALLOWED            = 7
    SEPARATOR_NOT_ALLOWED         = 8
    FILESIZE_NOT_ALLOWED          = 9
    HEADER_TOO_LONG               = 10
    DP_ERROR_CREATE               = 11
    DP_ERROR_SEND                 = 12
    DP_ERROR_WRITE                = 13
    UNKNOWN_DP_ERROR              = 14
    ACCESS_DENIED                 = 15
    DP_OUT_OF_MEMORY              = 16
    DISK_FULL                     = 17
    DP_TIMEOUT                    = 18
    FILE_NOT_FOUND                = 19
    DATAPROVIDER_EXCEPTION        = 20
    CONTROL_FLUSH_ERROR           = 21
    OTHERS                        = 22
IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
       WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Pankaj

What is the best way to export the data out of BW into a flat file on the S

Hi All,
We are BW 7.01 (EHP 1, Service Pack Level 7).
As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
Thanks in advance,
- Shashi

Hello Shashi,
some comments:
1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
For completeness, here's the most recent documentation which also lists other options:
http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
Regards,
Marc
SAP Customer Solution Adoption (CSA)

How can I find out whitch table are used in whitch document?

How can I find out whitch table are used in whitch document?
In the table EUL5_DOCUMENTS are stored the Documents and in the table EUL5_OBJS are stored the tables. How can I query these tables together?
Are there other possiblities?
Thanks

Hi Dierk
Please take a look at this thread: Re: An EUL query to list out All the Columns (Fileds) for each Workbook
I think you may well find what you are looking for in the answer that I gave there.
Best wishes
Michael

How to export the created Pivot table by using Power Pivot into separate excel file in the same format?

Similar Messages

Maybe you are looking for