How to export the Screens of dialog programming into notepad

Hi Guys,
       Here I am having a requirement to copy the screens of dialog program into another SAP system.
       So I have to export the screen along with coding into NOTEPAD.
       I am able to copy the coding part, <b>but how to copy the screen into notepad</b>
       Give me the appropriate answers.
       I will award the points to the answers

Hi Chakra.
please take carte that a screen consists of layout, fields and flow logic. Get all components using this form routine (taken from excellent useful SAP report RPR_ABAP_SOURCE_SCAN):
      Form  GET_DYNPRO_FLOW_LOGIC
      Get flow logic of the dynpro
form get_dynpro_flow_logic.
  data: dhead  like d020s,
        dfield like d021s occurs 0,
        dflow  like d022s occurs 0,
        dmatch like d023s occurs 0,
        begin of dynp_id,
          prog like d020s-prog,
          dnum like d020s-dnum,
       end of dynp_id.
  dynp_id-prog = dyn-prog.
  dynp_id-dnum = dyn-dnum.
  import dynpro dhead dfield dflow dmatch id dynp_id.
  rtab[] = dflow[].
endform.                               " GET_DYNPRO_FLOW_LOGIC
Regards,
Clemens

Similar Messages

  • How to print the output of the screen in Dialog Programming

    Hi,
    Could anybody help how to print the output of a screen in the dialog programming. i can select 'Hard Copy' option in the 'Custumizing of Local Layout' Icon in the standard tool bar. but that prints the whole screen with the toolbar. i want to print only the output which is displayed on the screen. Please help..
    Regards,
    Swathi

    Hi Swathi,
        Ok. Do One thing. Go to menu bar and select Systems -> Own pool Request -> here you get the spool number. Select it and select the option "Print Directly" in tool bar.
    Thanks.

  • How to get the output of a program into the email program.

    hi
    i had created a java mail program and the keygeneration program.seperately.
    i want to get the keygeneration into my email program.that should be sent along with the text message.so pls help me in this regared.
    i had pasted my coding her
    email pgm.
    import javax.mail.*;
    import javax.mail.internet.*;
    import java.util.*;
    import java.io.*;
    To use this program, change values for the following three constants,
    SMTP_HOST_NAME -- Has your SMTP Host Name
    SMTP_AUTH_USER -- Has your SMTP Authentication UserName
    SMTP_AUTH_PWD -- Has your SMTP Authentication Password
    Next change values for fields
    emailMsgTxt -- Message Text for the Email
    emailSubjectTxt -- Subject for email
    emailFromAddress -- Email Address whose name will appears as "from" address
    Next change value for "emailList".
    This String array has List of all Email Addresses to Email Email needs to be sent to.
    Next to run the program, execute it as follows,
    SendMailUsingAuthentication authProg = new SendMailUsingAuthentication();
    public class SendMailUsingAuthentication
    private static final String SMTP_HOST_NAME = "smtp.mail.yahoo.com";
    private static final String SMTP_AUTH_USER = "xxxx";
    private static final String SMTP_AUTH_PWD = "xxxx";
    //private static final String emailMsgTxt = "Online Order Confirmation Message. Also include the Tracking Number.";
    private static final String emailSubjectTxt = "Order Confirmation Subject";
    private static final String emailFromAddress = "[email protected]";
    private static String emailMsgTxt = "I am unable to attend to your message, as I am busy sunning"
    + "myself on the beach in Maui, where it is warm and peaceful."
    + "Perhaps when I return I'll get around to reading your mail."
    + "Or perhaps not.";
    private static final String[] emailList = { "[email protected]","[email protected]"};
    public static void main(String args[]) throws Exception
    SendMailUsingAuthentication smtpMailSender = new SendMailUsingAuthentication();
    smtpMailSender.postMail( emailList, emailSubjectTxt, emailMsgTxt, emailFromAddress);
    System.out.println("Sucessfully Sent mail to All Users");
    public void postMail( String recipients[ ], String subject,
    String message , String from) throws MessagingException
    boolean debug = true;
    Properties props = new Properties();
    props.put("mail.smtp.host", SMTP_HOST_NAME);
    props.put("mail.smtp.auth", "true");
    props.put("mail.smtp.port", "25");
    props.put("mail.smtp.protocol","smtp");
    props.put("mail.debug", "true");
    Authenticator auth = new SMTPAuthenticator();
    Session session = Session.getDefaultInstance(props, auth);
    session.setDebug(debug);
    // create a message
    Message msg = new MimeMessage(session);
    // set the from and to address
    InternetAddress addressFrom = new InternetAddress(from);
    msg.setFrom(addressFrom);
    InternetAddress[] addressTo = new InternetAddress[recipients.length];
    for (int i = 0; i < recipients.length; i++)
    addressTo[i] = new InternetAddress(recipients);
    msg.setRecipients(Message.RecipientType.TO, addressTo);
    // Setting the Subject and Content Type
    msg.setSubject(subject);
    msg.setContent(message, "text/plain");
    Transport.send(msg);
    private class SMTPAuthenticator extends javax.mail.Authenticator
    public PasswordAuthentication getPasswordAuthentication()
    String username = SMTP_AUTH_USER;
    String password = SMTP_AUTH_PWD;
    return new PasswordAuthentication(username, password);
    keygeneration program:
    import java.io.Serializable;
         import java.security.Security;
    import com.sun.net.ssl.*;
         import javax.crypto.KeyGenerator;
         import javax.crypto.Mac;
         import javax.crypto.SecretKey;
         public class Eval {
         public static void main(String args[]) throws Exception {
         String inputString ="0x0b0b0b0b";
         KeyGenerator keyGen = KeyGenerator.getInstance("HMACMD5");
         SecretKey secretKey = keyGen.generateKey();
         Mac mac = Mac.getInstance(secretKey.getAlgorithm());
         mac.init(secretKey);
         byte[] byteData = inputString.getBytes("UTF8");
         byte[] macBytes = mac.doFinal(byteData);
         String macAsString = new sun.misc.BASE64Encoder().encode(macBytes);
         System.out.println("Authentication code is: " + macAsString);

    I'm not sure what's confusing you. Just generate a String (using a StringBuffer)
    with the data you need and use it as the content of the mail message. If each
    recipient needs different content, they'll each need a different MimeMessage
    object.

  • How to capture the output of another program into a File/String

    I needed to capture the output of a dos program in an String/file I tried doing Runtime.getRuntime.exec("ipconfig /all >tmp.txt");
    but still I am unable to capture the output frm the program which I would like to capture in a file or String.Can anyone help

    When you use the Runtime.exec() method, it returns a Process object, that process object has access to the streams; stdout, stdin, and stderr of the application you just executed. what you'll want to monitor is the stdout or stderr streams using the
    p.getInputStream() or p.getErrorStream(), where p = the process object returned via the Runtime.exe() method.

  • How to set Screen type "Selection Screen" in Dialog program

    Hi Experts,
    I have copied a screen 400 from a program into my program. In that screen in source program, the screen type was defined as 'Selection Screen'. After i copied that screen into my program, the screen type Selection Screen option is disabled. How to set the screen type of a screen to Selection Screen.
    I am currently getting the following error
    "Error when generating the selection screen "0400" of   "Ztest_screen                 ".
    I tried running the generation program RSDBGENA. There the diagnosis was given as follows:
    When generating the report Ztest_screen and its selection screen, an existing screen 1000 (not a selection screen) was overwritten.
    The selection screen was defined as follows:
    SELECTION-SCREEN BEGIN OF SCREEN 400 AS SUBSCREEN.
    SELECTION-SCREEN BEGIN OF BLOCK blck1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_matnr FOR mara-matnr.
    PARAMETERS:     p_werks TYPE werks_d OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK blck1.
    SELECTION-SCREEN END OF SCREEN 400 .
    I am calling the screen 400 with selection screen declarations in PBO of screen 0100.
    CALL SUBSCREEN sub_scr INCLUDING 'Ztest_Screen'  '400'.
    Where am i going wrong? Your inputs are needed.
    Thanks

    Thanks Przemysław and Nabheet for your suggestions.
    I had copied the generated screen 400 also from the source program into my program. This was the error. I deleted that and the report got activated now.
    Both the source and destination programs are not module pool. They are executable programs.
    Thanks

  • It concerns adobe export pdf program. When we open  this program, it appears on the right of the screen." recognize the text in english"but. we would like to change it for french language. Because when we export the document under word program , it uses

    It concerns adobe export pdf program. When we open  this program, it appearsq on the right of the screen." recognize the text in english"but. we would like to change it for french language. Because when we export the document under word program , it uses english dictonnary to correct the text. thanks for your answer..

    [topic moved from Developers to Acrobat.com forum]

  • How to do the Validations in Report Programming?

    How to do the Validations in Report Programming?
    how to do screen Validations and Field Validations if posssible can any one send the code regarding the Validation ....
    Tks
    Durusoju

    AT SELECTION-SCREEN - selscreen_event
    Syntax
      | { ON {para|selcrit} }
      | { ON END OF selcrit }
      | { ON BLOCK block }
      | { ON RADIOBUTTON GROUP radi }
      | { }
      | { ON {HELP-REQUEST|VALUE-REQUEST}
      |   FOR {para|selcrit-low|selcrit-high} }
      | { ON EXIT-COMMAND }.
    Alternatives:
    1. ... OUTPUT
    2. ... ON {para|selcrit}
    3. ... ON END OF selcrit
    4. ... ON BLOCK block
    5. ... ON RADIOBUTTON GROUP radi
    6. ... { }
    7. ... ON {HELP-REQUEST|VALUE-REQUEST} FOR
          {para|selcrit-low|selcrit-high} }
    8. ... ON EXIT-COMMAND
    Effect
    These additions allow individual evaluation of specific elements of the selection screens of the program. The information as to which selection has triggered the event is contained in the system field sy-dynnr.
    Alternative 1
    ... OUTPUT
    Effect
    This event is triggered at the screen event PBO of a selection screen. In the event block, the selection screen can be prepared through assignments to the data objects of parameters and selection criteria and through dynamic screen modifications.
    Note
    The assignments to input fields in the event block AT SELECTION-SCREEN OUTPUT always affect the selection screen and overwrite the user inputs from previous displays of the same selection screen. Assignments in the event blocks LOAD-OF-PROGRAM oder INITIALIZATION, on the other hand, only have an effect at first program start.
    Alternative 2
    ... ON {para|selcrit}
    Effect
    This event is triggered at the screen event PAI of a selection screen if the content of the input field of a parameter para or a line of a selection criterion selcrit was passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or an error message in the event block makes the fields para and selcrit ready for input again.
    No parameter that is defined as a radio button can be specified. For this purpose, the addition ON RADIOBUTTON GROUP is provided.
    Note
    If a user action takes place in the dialog box for the multiple selection of a selection criterion selcrit, the entries of the selection table are passed to the program, line by line. For each line, the event AT SELECTION-SCREEN ON selcrit is triggered.
    Alternative 3
    ... ON END OF selcrit
    Effect
    This event is triggered after the selection table selcrit has been fully passed to the program after a user action in the dialog box for the multiple selection has taken place. In the event block, the entire selection table can be checked.
    Alternative 4
    ... ON BLOCK block
    Effect
    This event is triggered at the screen event PAI of a selection screen if all the input fields of a block block of the selection screen were passed to the ABAP program. In the event block, the user inputs can be checked. Sending a warning or an error message in the event block makes all the fields of the block block ready for input again.
    Alternative 5
    ... ON RADIOBUTTON GROUP radi
    Effect
    This event is triggered at the screen event PAI of a selection screen if all the fields of a radio button group radi of the selection screen were passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or error message in the event block makes all the radion buttons of the block radi ready for input again.
    Note
    The individual fields of a radio button group are not passed individually and do not trigger the event AT SELECTION-SCREEN ON par.
    Alternative 6
    Effect
    The event AT SELECTION-SCREEN itself is triggered as the last event of selection screen processing if all the input values were passed to the program. In this event block, all the user inputs can be checked. Sending a warning or an error message in the event block makes all the screen fields ready for input once again.
    Alternative 7
    ... ON { HELP-REQUEST | VALUE-REQUEST } FOR
        {para|selcrit-low|selcrit-high} }
    Effect
    The two events ON HELP-REQUEST and ON VALUE-REQUEST are triggered at the screen events POH and POV of a selection screen if - for the input field of a parameter para or one of the input fields of a selection criterion selcrit - the field help F1 or the input help F4 was called. Other selection events are not triggered.
    In the event blocks, a self-defined field or input field can be programmed, which overrides any helps possibly defined in the ABAP Dictionary.
    Notes
    These event blocks can only be implemented for fields of the selection screen that are defined in the same ABAP program and not in a possibly linked logical database.
    With the events for the field and input help, no data is transported between the selection screen and the ABAP program. As with general screens, suitable function modules must be used for these. The parameters and selection criteria changed for the input help are transported to the selection screen.
    Alternative 8
    ... ON EXIT-COMMAND
    Effect
    This event is triggered if the user has called one of the functions Back, Exit or Cancel. In the event block, possible clean-up actions can be executed.
    Example
    In these executable programs, a standard selection screen and a further selection screen are defined. In the event blocks AT SELECTION-SCREEN, the inputs in the selection screens can be specially handled using the name p_carrid and the screen number in sy-dynnr.
    REPORT demo_at_selection_screen.
    Global data
    DATA: sflight_tab TYPE TABLE OF sflight,
          sflight_wa  LIKE LINE  OF sflight_tab.
    Selection screens
    PARAMETERS p_carrid TYPE spfli-carrid.
    SELECTION-SCREEN BEGIN OF SCREEN 500.
      SELECT-OPTIONS s_conn FOR sflight_wa-connid.
      DATA s_conn_wa LIKE LINE OF s_conn.
    SELECTION-SCREEN END OF SCREEN 500.
    Handling selection screen events
    AT SELECTION-SCREEN ON p_carrid.
      IF p_carrid IS INITIAL.
        MESSAGE 'Please enter a value' TYPE 'E'.
      ENDIF.
      AUTHORITY-CHECK OBJECT 'S_CARRID'
                          ID 'CARRID' FIELD p_carrid
                          ID 'ACTVT'  FIELD '03'.
      IF sy-subrc = 4.
        MESSAGE 'No authorization for carrier' TYPE 'E'.
      ELSEIF sy-subrc <> 0.
        MESSAGE 'Error in authority check' TYPE 'A'.
      ELSE.
        IF sy-ucomm = 'ONLI'.
          CALL SELECTION-SCREEN '0500'.
        ENDIF.
      ENDIF.
    AT SELECTION-SCREEN.
      IF sy-dynnr = '0500'.
        IF s_conn IS INITIAL.
          MESSAGE 'Please enter values' TYPE 'W'.
        ELSE.
          SELECT *
                 FROM sflight
                 INTO TABLE sflight_tab
                 WHERE carrid = p_carrid AND
                       connid IN s_conn.
          IF sy-subrc <> 0.
            MESSAGE 'No flights found' TYPE 'E'.
          ENDIF.
        ENDIF.
      ENDIF.
    Main program
    START-OF-SELECTION.

  • Selction screen in dialog program

    Hi All..
    In my requirement, i need a selection screen that has a parameter for the PO number. Based on the valid PO number, the line items of the PO need to be displayed on the screen where the user should be able to split the line items into different batches.
    Once batch split is done, need to do a GR for the updated split data. Appreciate your help on how this can be acieved. Can we design a selection screen in dialog program ?
    Also how we can provide the split functionality (insertion of new rows for main line items to have the user enter new rows for exisitng line items to enter new batch number and quantity).
    Thanks and appreciate your help.

    <i>Can we design a selection screen in dialog program ?</i>
    Yes, you can be defining the selection screen as a subscreen and then embeding in a subscreen area of a dynpro, but it is  hardly worth it for just a parameter, it would be a different story if it were a select-option.  
    You can simply add the parameter to the dynpro using a regular input field.
    Regards,
    Rich HEilman

  • How to export the data to a excel file from RSA3?

    Hi experts,
    1.I am trying to save the RSA (SRM extractor) to excel spread sheet to compare SRM data with BI data. When i run the the transaction RSA3 it just showed me 10 different data packets. How to export the data to excel spread sheet for reconciliation?
    2. Does any body know if the stepup tables exist for SRM extractors?
    Thank in advance
    Sharat.

    Hello Sharat,
    You have two options of saving data to excel sheet:
    Step 1: 
    Goto RSA3, change the "Data Records / Calls" to 1000 and then execute. This way instead of 10 different packets you will get one packet.
    Step2:
    Click on the list button, open the packet by double clicking it. You will see all the data on your screen.
    Step3:
    Goto System -> List -> Save - > Local File -> Spreadsheet and give some name for your xls file.
    Assign points if helpful.
    Regards,
    F-S

  • How to call the screen in methods could u please explain

    hi,
    how to call the screen in methods could u please explain clearly with example

    HI ,
    CALL SCREEN - Call a screen
    Basic form
    CALL SCREEN scr.
    Addition:
    ... STARTING AT x1 y1 ... ENDING AT x2 y2
    Effect
    Calls the screen scr; scr is the number of a screen of the main program. You use SET SCREEN 0. or LEAVE SCREEN. to define the return from the CALL screen.
    Note
    Please consult Data Area and Modularization Unit Organization documentation as well.
    Addition
    ... STARTING AT x1 y1  ENDING AT x2 y2
    Effect
    The coordinates x1, y1 (start column and start line in the window) and x2, y2 (end column and end line in the window) define the size and position of the CALL screen ("top left - bottom right"). Besides these coordinates, you can also see the contents of the primary window, but cannot perform any action there.
    Note
    If "ENDING AT ..." is not specified, suitable values are substituted for x2 and y2, taking into account the size of the called screen.
    Exceptions
    Non-Catchable Exceptions
    Cause: No further screen level (call screen); the maximum number of nested screen levels is restricted to 50 at present.
    Runtime Error: DYNP_TOO_MANY_CALL_SCREENS
    THX

  • How to set default values in dialog programming

    hi gurus
    can anyone suggest me
    how to set default values in dialog programming
    thanks&regards
    kals.

    it's a bit dirty but I usually just place it in the PBO with a flag for control. It's simple and not too costly i think.
    MODULE preRender OUTPUT.
      DATA first_time TYPE flag VALUE 'X'.
      IF first_time EQ 'X'.
    *   put your initialization code here
        CLEAR first_time.
      ENDIF.
    ENDMODULE.
    -MiR

  • How to enable the screen after triggering the error message

    Hi All,
    we have a tcode IW31, in that one field(WBS element -PROID) is not mandatory. so we have written the following code to make it mandatory in a user exit EXIT_SAPLCOIH_010.It's triggering the error message, but it is going into disable mode. Please sugget me how to enable the screen after getting the error message triggering.
    if not caufvd_imp-proid is initial.
      select single * from t350 into wa_t350
              where  auart    = caufvd_imp-auart
                and  imord    = 'X'.
      if sy-subrc is initial.
        pspel = caufvd_imp-proid.
      else.
        call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
             exporting
                  input  = caufvd_imp-proid
             importing
                  output = l_posid.
        concatenate text-t10 l_posid text-t11
                    into l_textline1 separated by space.
        message i208(00) with l_textline1.
      endif.
    else.
      message e208(00) with 'Please maintain WBS element in Location Tab'.
    endif.
    Thanks

    Hi,
    Instead of error message use status message like
    message s208(00) with 'Please maintain WBS element in Location Tab'.
    Leave to screen sy-synnr.
    This will allow to move to the screen and have in enable mode.
    WIth Regards,
    Dwaraka.S
    Edited by: Dwarakanath Sankarayogi on Feb 13, 2009 7:46 AM

  • How to avoid the screen of selection output device

    Hi all,
    Who can tell me how to avoid the screen selection output device when running a smartform.
    Best regard.

    Hi,
          data: wa_SSFCTRLOP  type SSFCTRLOP.
           wa_SSFCTRLOP-DEVICE = 'PRINTER'.
           wa_SSFCTRLOP-NO_DIALOG =  'X'.
           wa_SSFCTRLOP-PREVIEW = 'X'.
        in the function module
       call function '....
       exporting
       CONTROL_PARAMETERS = wa_ssfctrlop
    regards,
    Santosh Thorat

  • How to find the screen exit of migo screen

    Hi anybody,
      Please tell me how to find the screen exit in MIGO Sceen.
    Thks
    Kali.

    GO TO TRANSACTIO CODE MIGO
    GO->SYSTEM->STATUS
    COPY THE PROGRAM NAME
    OPEN SE38 EDITOR
    GIVE THE PROGRAM NAME
    IN THE GLOABL SEARCH SEARCH THE STRING
    SELECT RADIO BUTTON MAIN PROGRAM
    CALL CUSTOMER
    U WILL GET SOME CALL CUSTOMER FUNCTION '001'.
    DOUBLE CLICK ON THAT U WILL GET THE EXIT
    FOR ANY EXIT SCREEN MENU FUNCTION THE PROCEDURE IS SAME
    PLEASE REWARD IF USEFUL
    REGARDS
    I

  • How to reload the screen when changing languages in JavaFX 2?

    I'm beginner with javaFX and i need to change language of the screen. but i have no idea how to reload the screen when the language was changed. The application have a button where have the language available. I want just refresh screen when the user change language.
    Here is the start method to show the stage.
        @Override
        public void start(Stage stage) throws Exception
            this.stage = stage;
            Locale locale = Locale.getDefault();
            ResourceBundle rb = ResourceBundle.getBundle("resources/Label",locale);
            loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
            root = (Parent)loader.load();
            FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
            controller.setMain(this);
            scene = new Scene(root);
            stage.setScene(scene);
            stage.show();
    here is the function to change the language(in the same class with start function),the rb is the new ResourceBundle:
        public void refresh(ResourceBundle rb)
              //change the language here
    1. I don't want to use the resourceBundle to get value in resource file and set label in scene one by one.like following:
    this.btnLabel.setText(rb.getString(key.test));
    2. I don't want to reload the scene,like following:
        public void refresh(ResourceBundle rb)
             try
                loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
                root = (Parent)loader.load();
                scene.setRoot(root);
                FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
                controller.setMain(this);
            catch(Exception err)
                err.printStackTrace();
    So do we have a solution to just set the resourceBundle and reload the scene easier?
    Thanks and best regards!

    Your option 2 (reload the FXML for the scene using the new resource bundle as a parameter), is the way this would normally be done and what I would recommend.
    Failing that, you could use option 1 of individually resetting the label text of labeled items (I don't really recommend this).
    Why don't you want to use option 2?
    Perhaps it is because there is some internal state of the UI which differs from the initial state when the the UI is first loaded (e.g. user has typed text in a text field and you want to preserve that).  If that's the case you will need to either go with your option 1 of individually resetting the label text of labeled items, or implement something which preserves the UI state and user data by saving it in memory or to disk, reloading the UI via the FXMLLoader (essentially your option 2), then restoring the UI state and user data to what it was before the language change.  Preserving and restoring the modified state seems complicated to me if you have a lot of state, so I wouldn't really advise this approach unless you really needed it.

Maybe you are looking for