How to extract HR Position series to BW

In the case of our project, we can find one position series in R/3 like below, using PPOME. Now we want to get it for reporting purpose in BW side.
Position series
--Management catagory
Leader
Speciality management
--Engineering technical catagory
Design development
Engineering management
--Production operator catagory
Basic production operator
--Service catagory
Logistics service
--Others
Question, how could we get this in BW side. Is there any standard datasource in the source system?
Edited by: hi ni on Apr 21, 2008 3:58 AM

Hello,
You should use the infocube 0PAOS_C01 with infosource 0HR_PA_OS_1 for organizational reporting.
http://help.sap.com/saphelp_nw04/helpdata/en/d7/3cd8372dc09550e10000009b38f842/content.htm
0ORGUNIT would serve as master data.
BR/
Mathew.

Similar Messages

How to extract binary data from a File?

Hello there!
Hope I'm right here.
I have a slight problem with a file containing text- and binary-data. At the beginning of the file is only some text followed by some html-code and at the end is some binary stuff like a pdf oder an image (jpg/gif).
My problem is now how to split these parts and save them in the suitable format. The text and the html are no problem, but I don't know how to extract the binary data. I tried it out with an Inputstream, but I don't know how to find the exact position where the binary data begins.
Anyone have an idea how I can solve this?
Thanks in advance and sorry for my bad english.

I don't believe a bullet-proof solution exists.
If you know where the HTML ends, you may skip whitespace and then assume the rest is binary data. Or, if you know the first bytes of the binary data, you may locate those. With either of these solutions, though, you risk coming across a file where it doesn't work as expected, for example if the first byte of the binary data happens to match a whitespace character.

HT4016 How to extract audio from a movie that is already in my project without having to delete and re-import the movie?

The article is
"How to extract audio from a movie file"
But it only tells you how to extract when you first drag the movie file into the project. This much is obvious when a dialog presents you with a checkbox asking if you want to "Extract the audio track" ... Duh
Here was my workflow:
Dragged the movie file into my project
I checked "Extract the audio track"
I shifted the "Movie Start Time"
Extracted audio track did not shift with the movie
I deleted the extracted audio and played the audio directly from the movie
Now, I need the audio extracted again at the current movie position
I knew where this option was in the Logic 9 menus, but I'm having trouble finding it in Logic X
Is this option still available, or has it been removed?

Solved:
I found the menu option for extracting or re-extracting the movie audio. BTW, the original article:
Logic Pro 9.1: How to extract audio from a movie file in 64-bit mode
should really also state the menu command for extracting the audio, not just the procedure when first adding the movie to the project.
Here's the menu command:
File>Movie>Import Audio from Movie
Cheers

How to Extract Data for a Maintenance View, Structure and Cluster Table

I want to develop 3 Reports
1) in First Report
it consists only two Fields.
Table name : V_001_B
Field Name1: BUKRS
Table name : V_001_B
Field Name2: BUTXT
V_001_B is a Maintenance View
For this one I don't Find any Datasource
For this Maintenance View, How to Extract the Data.
2)
For the 2nd Report also it consists Two Fields
Table name : CSKSZ
Field Name1: KOSTL (cost center)
Table name : CSKSZ
Field Name2: KLTXT (Description)
CSKSZ is a Structure
For this one I don't Find any Datasource
For this Structure How to Extract the Data
3)
For the 3rd Report
in this Report all Fields are belonging to a Table BSEG
BSEG is a Cluster Table
For this one also I can't Find any Datasource,
I find very Few Objects in the Datasource.
For this One, How to Extract the Data.
Please provide me step by step procedure.
Thanks
Priya

Hi sachin,
I don't get your point can you Explain me Briefly.
I have two Fields for the 1st Report
BUKRS
BUTXT
In the 2nd Report
KOSTL
KLTXT
If I use 0COSTCENTER_TEXT Data Source
I will get KOSTL Field only
what about KLTXT
Thanks
Priya

Open Hub: How-to doc "How to Extract data with Open Hub to a Logical File"

Hi all,
We are using open hub to download transaction files from infocubes to application server, and would like to have filename which is dynamic based period and year, i.e. period and year of the transaction data to be downloaded.
I understand we could use logical file for this purpose. However we are not sure how to have the period and year to be dynamically derived in filename.
I have read in sdn a number of posted messages on a similar topic and many have suggested a 'How-to' paper titled "How to Extract data with Open Hub to a Logical Filename". However i could not seem to be able to get document from the link given.
Just wonder if anyone has the correct or latest link to the document, or would appreciate if you could share the document with all in sdn if you have a copy.
Many thanks and best regards,
Victoria

Hi,
After creating open hub press F1 in Application server file name text box from the help window there u Click on Maintain 'Client independent file names and file paths' then u will be taken to the Implementation guide screen > click on Cross client maintanance of file name > create a logical file path by clicking on new entiries > after creating logical file path now go to Logical file name definition there give your Logical file , name , physical file (ur file name followed by month or year what ever is applicable (press f1 for more info)) , data format (ASC) , application area (BW) and logical path (choose from F4 selection which u have created first), now goto Assignment of physical path to logical path > give syntax group >physical path is the path u gave at logical file name definition.
however we have created a logical path file name to identify the file by sys date but ur requirement seems to be of dynamic date of tranaction data...may u can achieve this by creating a variable. U can see the help from F1 that would be of much help to u. All the above steps i have explained will help u create a dynamic logical file.
hope this helps u to some extent.
Regards

How to extract Slide data in 3rd part application from clipboard

I need to be able to copy/paste or drag/drop from PowerPoint into another application (C# WPF). In my OnDrop method the DragEventArgs Data has these formats:
        [0]   "Preferred DropEffect"   string
       [1]   "InShellDragLoop"   string
       [2]   "PowerPoint 12.0 Internal Slides"   string
       [3]   "ActiveClipBoard"   string
       [4]   "PowerPoint 14.0 Slides Package"   string
       [5]   "Embedded Object"   string
       [6]   "Link Source"   string
       [7]   "Object Descriptor"   string
       [8]   "Link Source Descriptor"   string
       [9]   "PNG"   string
       [10]   "JFIF"   string
       [11]   "GIF"   string
       [12]   "Bitmap"   string
       [13]   "System.Drawing.Bitmap"   string
       [14]   "System.Windows.Media.Imaging.BitmapSource"   string
       [15]   "EnhancedMetafile"   string
       [16]   "System.Drawing.Imaging.Metafile"   string
       [17]   "MetaFilePict"   string
       [18]   "PowerPoint 12.0 Internal Theme"   string
       [19]   "PowerPoint 12.0 Internal Color Scheme"   string
The "PowerPoint 14.0 Slides Package" is a byte array... can this be converted into Slides?
If not how would I go about getting high-resolution images + slide text from a drag/drop?
[Originally posted here: http://answers.microsoft.com/en-us/office/forum/office_2013_release-powerpoint/how-to-extract-slide-data-in-3rd-part-application/a0b5ed64-eb77-49bb-bf44-e0732e23a5eb]

What I'd like to do:
Open PowerPoint
In PPT open a presentation
In PPT select a slide
Drag it to my 3rd party WPF application
In the 3rd party WPF application drop handler get the slide data (text, background image, etc...).
When I do this I get the DragEventArgs Data (the clipboard data) and it has the 20 supported formats I listed in the 1st post. From these formats #4 seemed like it could have some useful info.
WPF
<Window x:Class="PowerPointDropSlide.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="350" Width="525" AllowDrop="True" Drop="UIElement_OnDrop" DragOver="UIElement_OnDragOver">
<Grid HorizontalAlignment="Stretch" VerticalAlignment="Stretch" Background="LightBlue">
<TextBlock Text="Drop something here!"/>
</Grid>
</Window>
Handlers:
public void UIElement_OnDragOver(object sender, DragEventArgs e)
public void UIElement_OnDrop(object sender, DragEventArgs e)
string[] supportedFormats = e.Data.GetFormats();
object pptSlidesPackage = e.Data.GetData("PowerPoint 14.0 Slides Package");

How to extract text from a PDF file?

Hello Suners,
i need to know how to extract text from a pdf file?
does anyone know what is the character encoding in pdf file, when i use an input stream to read the file it gives encrypted characters not the original text in the file.
is there any procedures i should do while reading a pdf file,
File f=new File("D:/File.pdf");
               FileReader fr=new FileReader(f);
               BufferedReader br=new BufferedReader(fr);
               String s=br.readLine();any help will be deeply appreciated.

jverd wrote:
First, you set i once, and then loop without ever changing it. So your loop body will execute either 0 times or infinitely many times, writing the same byte every time. Actually, maybe it'll execute once and then throw an ArrayIndexOutOfBoundsException. That's basic java looping, and you're going to need a firm grip on that before you try to do anything as advanced as PDF reading. the case.oops you are absolutely right that was a silly mistake to forget that,
Second, what do the docs for getPageContent say? Do they say that it simply gives you the text on the page as if the thing were a simple text doc? I'd be surprised if that's the case.getPageContent return array of bytes so the question will be:
how to get text from this array? i was thinking of :
    private void jButton1_actionPerformed(ActionEvent e) {
        PdfReader read;
        StringBuffer buff=new StringBuffer();
        try {
            read = new PdfReader("d:/getjobid2727.pdf");
            read.getMetaData();
            byte[] data=read.getPageContent(1);
            int i=0;
            while(i>-1){
                buff.append(data);
i++;
String str=buff.toString();
FileOutputStream fos = new FileOutputStream("D:/test.txt");
Writer out = new OutputStreamWriter(fos, "UTF8");
out.write(str);
out.close();
read.close();
} catch (Exception f) {
f.printStackTrace();
"D:/test.txt" hasn't been created!! when i ran the program,
is my steps right?

How to extract text from a PDF file using php?

How to extract text from a PDF file using php?
thanks
fabio

> Do you know of any other way this can be done?
There are many ways. But this out of scope of this forum. You can try this forum: http://forum.planetpdf.com/

How to extract tax amount in item level from a Purchase order

Hi experts,
How to extract the tax amount data for each item in a Purchase order.
I am using the data sources 2lis_02_itm, 2lis_02_scl, 2lis_02_S012.
Please provide me which data source brings this tax amount data in item level and also the technical
field name of tax amount.
<Removed by moderator - soliciting points for answers is frowned upon>
Regards,
Bhadri M.
Edited by: Arun Varadarajan on Nov 14, 2008 3:55 PM

Dear Bhadri
Did you look 2LIS_13_VDKON data source whther it can throw or not for billing related. Here you should look some billing conditions relates to particular document like taxable or not.
(KAWRT, KAWRT_K, BIWGEO)
Those informations will be maintained each with billing conditions.
May not sure. Please look.
Raju Saravanan

How to Extract Customized Financial Statement Version from R/3 to BW

Hi Gurus,
Could anybody tell me how to Extract Customized Financial Statement Version from R/3 to BW. Also send me docs on FICO and COPA extraction from R/3 to BW.
Thanks in advance...
Regards
Rafi

Sayed
Please see this BW Best Practice link
http://help.sap.com/bp_biv133/
http://help.sap.com/bp_biv235/BI_EN/html/BW/COPABaselineAnal.htm
http://help.sap.com/bp_biv235/BI_EN/html/BW/ControllingAnalysis.htm
COPA Business content
http://help.sap.com/saphelp_nw04/helpdata/en/28/3dc7393b26da1de10000000a114084/content.htm
Hope this helps
Thnaks
Sat

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

How to extract PS data from sap r/3 to bw

Hi,
How to extract PS data from sap r/3 to bw
PS data like plans,budget,accurals&commitmnets
can any one help me regarding this..
Thanks in Advance,
Shankar.

HI sankar,
you can refer the belkow link to find the details on the relevant extractors and infoproviders
http://help.sap.com/erp2005_ehp_04/helpdata/EN/17/416d030524064cb2b8d58ffb306f3a/frameset.htm
Regards,
Sathya

How to extract the column width in ALv report if its executed in background

I am executing an ALV report in background , in front end i am getting data properly, in back end for some columns some of the digits are missing.For example if PO no is of 10 digits it will display only 8 becos column size is like that , how to extract coulmns in back ground.
I have executed in background and checked the spool and for some of the columns width is not sufficient to display comeplete data so please suggest how to extract the columns sizes if executed inj background for an ALV

Hi Deepthi,
you can try with the above mentioned suggestions ,if its worked its fine ,
If not use Docking container instead of custom container, For ALV in back ground jobs, its suggest to use docking container instead of custom container , below you can find the declaration for docking container and code to use docking and custom container in your program for fore and back ground.
or you can use docking container alone for both operations.
Data : G_DOCK1 TYPE REF TO CL_GUI_DOCKING_CONTAINER,
IF CCON IS INITIAL. (ccon is container name )
*Check whether the program is run in batch or foreground
    IF CL_GUI_ALV_GRID=>OFFLINE( ) IS INITIAL.
*Run in foreground
      CREATE OBJECT CCON
        EXPORTING
          CONTAINER_NAME = 'CON1'.
    CREATE OBJECT GRID1
        EXPORTING
          I_PARENT = parent_1.
ELSE.
*Run in background
      CREATE OBJECT GRID1
        EXPORTING
          I_PARENT = G_DOCK1.
    ENDIF.
ENDIF.
B&R,
Saravana.S

How can i export a series of images in different aspect ratios to the same height

How can i export a series of images in different aspect ratios to the same height?
I wish to make a slider callery for my website. all the images need to be 750 Pixels high, the width does not matter. I have a mixture of square pandscap and protraite images can i do thing as one export or do i have to do it twice? Once for long edge and once for shot edge?
Thanks

Yes, you can but there is a trick to it.
In the Export Dialog under <Image Sizing> select Widdth & Height.
Then enter 750 pixels for Height.
Put your cursor into the Width field behind all the numbers that appear there and with the backspace key delete the numbers. If you enter "0" it will not accept that. But it accepts when you just delete the field for Width with the backspace key. The Width field will now be just blank.
When you then export all image will have a height of 750 pixels and the width will fall variously according to thne height / width ratio.
Or alternatively you can enter 7.5" for height at a resolution of 100 ppi.

How to extract data of a view

Hi,
I'm working with VB.net and SBO 2005. My question is :
How to extract data of a view ?
Thank you.

Hi!
View is just a T-SQL statement stored and saved on the server side. All you need is to query this view using the following syntax:
SELECT <view columns> FROM <view name> WHERE <conditions>
So the syntax is the same as T-SQL SELECT-clause
HTH

How to extract HR Position series to BW

Similar Messages

Maybe you are looking for