How to fetch Excel sheet through File adapter in SAP PI?

Dear all
Can u help me with this?
Regards
karan kanotra

Dear sir This is a new scenario .
I got an requirement to activate Forward Error Handling in SRM. I have searched on SDN but didn't find appropriate answer on it.
Even I found some link: PI/XI: Forward Error Handling (FEH) for asynchronous proxy calls with the use of Error and Conflict Handler (ECH)
It explains me some points like activating FEH from SRM in SPRO. I have activated the same, plz check the screen shot:
It also follows some development for the same.
Here my concern is, should I follow this document? Does it applicable to all to all the scenarios?
Step 8: it assign object id and type what does it mean...
Does any one can explain me in detail..... Please provide me any document to configure the FEH in SRM.
I am trying to implement FEH in my SRM system. So that when even XML fails due to error, I should be able to reprocess/restart it with some editing to the XML.
My receiver interface for XML is PurchaseRequestERPSourcingRequest_In
I think this is standard one and no need to make any custom code for it. SAP has all ready given solution for it with some Configuration.
I have made some configurations like:
The view FEHV_ACTIVE must have the status active.
In transaction /SAPPO/LOGSYS , the logical system must be defined for the software component SRM-EBP-ESA .
As stated in in the link :
http://esworkplace.sap.com/socoview%28bD1lbiZjPTAwMSZkPW1pbg==%29/render.asp?id=2BAABCB0D30111DC2B8D000F20FCB6A9&fragID=…
Also I have made some configuration according to the Note: 1973768 - No reprocess option is available in FEH for failed in XML in SRM
Resulted, the “Process” button get activated in the XML Post Processing screen.
But can I reprocess my XML with edited value from there..?
All the configuration part of PI is already done .
I wanted to know about the FEH Part. what are the steps i am missing or where i am going wrong ?
Please let me help.
Thanks
Regards
Karan

Similar Messages

How to fetch Excel sheet through File adapter and Mapping to IDOC in SAP PI?

Dear all
Help me with this scenario?
Thanks
Regards
karan kanotra

Dear sir This is a new scenario .
I got an requirement to activate Forward Error Handling in SRM. I have searched on SDN but didn't find appropriate answer on it.
Even I found some link: PI/XI: Forward Error Handling (FEH) for asynchronous proxy calls with the use of Error and Conflict Handler (ECH)
It explains me some points like activating FEH from SRM in SPRO. I have activated the same, plz check the screen shot:
It also follows some development for the same.
Here my concern is, should I follow this document? Does it applicable to all to all the scenarios?
Step 8: it assign object id and type what does it mean...
Does any one can explain me in detail..... Please provide me any document to configure the FEH in SRM.
I am trying to implement FEH in my SRM system. So that when even XML fails due to error, I should be able to reprocess/restart it with some editing to the XML.
My receiver interface for XML is PurchaseRequestERPSourcingRequest_In
I think this is standard one and no need to make any custom code for it. SAP has all ready given solution for it with some Configuration.
I have made some configurations like:
The view FEHV_ACTIVE must have the status active.
In transaction /SAPPO/LOGSYS , the logical system must be defined for the software component SRM-EBP-ESA .
As stated in in the link :
http://esworkplace.sap.com/socoview%28bD1lbiZjPTAwMSZkPW1pbg==%29/render.asp?id=2BAABCB0D30111DC2B8D000F20FCB6A9&fragID=…
Also I have made some configuration according to the Note: 1973768 - No reprocess option is available in FEH for failed in XML in SRM
Resulted, the “Process” button get activated in the XML Post Processing screen.
But can I reprocess my XML with edited value from there..?
All the configuration part of PI is already done .
I wanted to know about the FEH Part. what are the steps i am missing or where i am going wrong ?
Please let me help.
Thanks
Regards
Karan

How to Lock Excel Sheet through Java Code

Hi
Iam using Jasper Reports.Iam exporting to Excel.I want to Lock Excel sheet after Export.I need code how to lock and unlock
TQ

I guess you need some library that can modify Excel files, like JExcel or Jakarta POI.

Uploading data from excel sheets through BDC's into sap system

hi guys,
can you please help me with this. As we use gui_upload to upload data from flat file to sap system, which function module you use to upload data from Excel sheet to sap system through bdc's

hello pavan,
welcome to SDN
check the below program
REPORT ZEXCEL_TO_INTERNAL .
data: begin of itab occurs 0,
      name(20) type c,
      addre(20) type c,
      end of itab.
DATA : ITAB1 LIKE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
DATA : B1 TYPE I VALUE 1,
       C1 TYPE I VALUE 1,
       B2 TYPE I VALUE 100,
       C2 TYPE I VALUE 9999.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    FILENAME                   =
    'C:\Documents and Settings\administrator\Desktop\ppcon001bd_24.xls'
    I_BEGIN_COL                   = B1
    I_BEGIN_ROW                   = C1
    I_END_COL                     = B2
    I_END_ROW                     = C2
TABLES
    INTERN                        = itab1
EXCEPTIONS
   INCONSISTENT_PARAMETERS       = 1
   UPLOAD_OLE                    = 2
   OTHERS                        = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at itab1.
write:/ itab1.
Endlop.
Regards,
Naveen

How to append records in a file, through file adapter.

Hi All,
How to append records in a file, through file adapter.
I have to read data from database and need to append all records in a file.
Thanks in Advance.

Hi,
I think you have a while loop to hit the DB in your Process (As you said you have to fetch data from DB 10 times if 1000 rec are there)
First sopy your DB O/P to one var
and from second time append to previous data.(Otherwise you can directly use append from starting instead of copy and append)
When loop completes you can transform to File adapter Var.
Otherwise you can configure yourFileadapter such that it will aapend current records to previous records.
You can use 'Append= true' in your file adapter wsdl.
It will append previous records to current records in the same file.
Regards
PavanKumar.M

How to upload datas in excel sheet through BDC

Hi,
    I know how to upload datas in Text format through BDC...Suppose even when datas are in .xls format,I saved that file as Text(tab delimited) format...then file become text format and it can be easily uploaded....
    So, I want to know How to upload datas in excel sheet through BDC

hi,
try this Example, hope useful to u, assign me point.
report ZMSV1_BDC_CALL
       no standard page heading line-size 255.
*include bdcrecx1.
*parameters: dataset(132) lower case.
   DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
      '* data element: ' followed with the data element
      which describes the field.
      If you don't have a data element use the
      comment without a data element name
3.) The second line shows the fieldname of the
      structure, the fieldname must consist of
      a fieldname and optional the character '_' and
      three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record,
data element: BUKRS
        BUKRS_001(004),
data element: KTOKK
        KTOKK_002(004),
data element: NAME1_GP
        NAME1_003(035),
data element: SORTL
        SORTL_004(010),
data element: ORT01_GP
        ORT01_005(035),
data element: LAND1_GP
        LAND1_006(003),
data element: SPRAS
        SPRAS_007(002),
data element: BANKS
        BANKS_01_008(003),
data element: BANKK
        BANKL_01_009(015),
data element: BANKN
        BANKN_01_010(018),
      end of record.
End generated data section ***
data: itab like record occurs 0 .
data: it_bdc type bdcdata occurs 0 with header line.
data: it_msg type bdcmsgcoll occurs 0 with header line.
parameter p_file type rlgrap-filename default 'c:\vendor.txt' obligatory
start-of-selection.
perform open_dataset using p_file.
perform open_group.
*perform close_group.
*perform close_dataset using dataset.
*&      Form open_dataset
      text
     -->P_P_FILE text
form open_dataset using    p_p_file.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE                      = ' '
FILENAME                      = p_file
FILETYPE                      = 'DAT'
HEADLEN                       = ' '
LINE_EXIT                     = ' '
TRUNCLEN                      = ' '
USER_FORM                     = ' '
USER_PROG                     = ' '
DAT_D_FORMAT                  = ' '
IMPORTING
FILELENGTH                    =
TABLES
    data_tab                      = itab
EXCEPTIONS
CONVERSION_ERROR              = 1
FILE_OPEN_ERROR               = 2
FILE_READ_ERROR               = 3
INVALID_TYPE                  = 4
NO_BATCH                      = 5
UNKNOWN_ERROR                 = 6
INVALID_TABLE_WIDTH           = 7
GUI_REFUSE_FILETRANSFER       = 8
CUSTOMER_ERROR                = 9
NO_AUTHORITY                  = 10
OTHERS                        = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " open_dataset
*&      Form open_group
      text
--> p1        text
<-- p2        text
form open_group .
loop at itab into record.
perform bdc_dynpro      using 'SAPMF02K' '0105'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-KTOKK'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-BUKRS'
                              record-BUKRS_001.
perform bdc_field       using 'RF02K-KTOKK'
                              record-KTOKK_002.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-ORT01'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-NAME1'
                              record-NAME1_003.
perform bdc_field       using 'LFA1-SORTL'
                              record-SORTL_004.
perform bdc_field       using 'LFA1-ORT01'
                              record-ORT01_005.
perform bdc_field       using 'LFA1-LAND1'
                              record-LAND1_006.
perform bdc_field       using 'LFA1-SPRAS'
                              record-SPRAS_007.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-KOINH(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'LFBK-BANKS(01)'
                              record-BANKS_01_008.
perform bdc_field       using 'LFBK-BANKL(01)'
                              record-BANKL_01_009.
perform bdc_field       using 'LFBK-BANKN(01)'
                              record-BANKN_01_010.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPMF02K' '0210'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-AKONT'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0215'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-ZTERM'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0220'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB5-MAHNA'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
call transaction 'FK01' using it_bdc mode 'A' update 'S'
                             messages into it_msg.
write:/ sy-subrc.
    perform message_formatwrite.
refresh it_bdc.
clear it_bdc.
endloop.
endform.                    " open_group
*&      Form message_formatwrite
      text
--> p1        text
<-- p2        text
form message_formatwrite .
data:l_msg(10).
loop at it_msg.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
   ID              = SY-MSGID
   LANG            = sy-langu
   NO              = SY-MSGNO
   V1              = SY-MSGV1
   V2              = SY-MSGV2
   V3              = SY-MSGV3
   V4              = SY-MSGV4
IMPORTING
   MSG             = l_msg
EXCEPTIONS
   NOT_FOUND       = 1
   OTHERS          = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endloop.
endform.                    " message_formatwrite
*&      Form bdc_dynpro
      text
     -->P_0112   text
     -->P_0113   text
form bdc_dynpro using    value(p_0112)
                          value(p_0113).
it_bdc-program = p_0112.
it_bdc-dynpro = p_0113.
it_bdc-dynbegin = 'X'.
append it_bdc.
clear it_bdc.
endform.                    " bdc_dynpro
*&      Form bdc_field
      text
     -->P_0117   text
     -->P_0118   text
form bdc_field using    value(p_0117)
                         value(p_0118).
it_bdc-fnam = p_0117.
it_bdc-fval = p_0118.
append it_bdc.
clear it_bdc.
endform.                    " bdc_field
Regards
fareedas

Upload data in excel sheet through BDC

Dear all,
How do we upload data in excel sheet through BDC?
Thanks in advance.
Regards,
Sandra.

Hi,
     The sample code is as given below:
REPORT upload_supply_area.
*include for dispaying icons in error log
INCLUDE <icon>.
*Declaration of structure.
TYPES:BEGIN OF x_struct,
      werks TYPE v_pvbe-werks,          "Plant
      prvbe TYPE v_pvbe-prvbe,          "Supply Area
      pvbtx TYPE v_pvbe-pvbtx,          "Production supply area description
      lgort TYPE v_pvbe-lgort,          "Storage Location
      rgver TYPE v_pvbe-rgver,          "Person responsible for one or more supply areas
      END OF x_struct.
TYPES:BEGIN OF x_messages,
       msgtyp(1) type c,
       werks TYPE v_pvbe-werks,          "Plant
       prvbe TYPE v_pvbe-prvbe,          "Supply Area
       message(120) type c,
       END OF x_messages.
DATA: it_messages TYPE STANDARD TABLE OF x_messages .
DATA: wa_messages TYPE x_messages.
DATA:it_msgtab TYPE STANDARD TABLE OF bdcmsgcoll,
     wa_msgtab TYPE bdcmsgcoll.
*internal table for BDC
DATA: it_bdcdata TYPE STANDARD TABLE OF bdcdata.
DATA: wa_bdcdata TYPE bdcdata.
DATA:it_file TYPE STANDARD TABLE OF x_struct.        "internal table which has same structure as file
DATA:wa_file TYPE x_struct.                          "work area which has same structure as file
DATA: it_excel TYPE STANDARD TABLE OF alsmex_tabline,
      wa_excel TYPE alsmex_tabline.
DATA: x_ctuprms TYPE ctu_params.
DATA:nodata TYPE c VALUE '/'.
data:con(50) type c.
data:con1(50) type c.
*selection screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
*Enter file name on presentation server
PARAMETERS: p_file TYPE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
*Function which enables the user to browse the files on hard disk
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      program_name = syst-repid
      static        = 'X'
    CHANGING
      file_name     = p_file
    EXCEPTIONS
      mask_too_long = 1
      OTHERS        = 2.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
START-OF-SELECTION.
*Subroutine to upload excel file and read it
PERFORM upload.
*Subroutine to upload supply area data
PERFORM fill.
*&      Form bdc_dynpro
      Fill the BDC table
FORM bdc_dynpro USING program dynpro.                       "#EC *
CLEAR wa_bdcdata.
wa_bdcdata-program = program.
wa_bdcdata-dynpro   = dynpro.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
ENDFORM.                    "BDC_DYNPRO
*&      Form bdc_field
       Fill the BDC table
FORM bdc_field USING fnam fval.                             "#EC *
IF fval <> nodata.
    CLEAR wa_bdcdata.
    wa_bdcdata-fnam = fnam.
    wa_bdcdata-fval = fval.
    APPEND wa_bdcdata TO it_bdcdata.                        "#EC
ENDIF.
ENDFORM.                    "BDC_FIELD
*&      Form collect_messages
      Collect the messages from transaction
FORM collect_messages .                                     "#EC *
DATA: w_msg(100).
LOOP AT it_msgtab INTO wa_msgtab.
    CALL FUNCTION 'FORMAT_MESSAGE'
      EXPORTING
        id        = wa_msgtab-msgid
        lang      = wa_msgtab-msgspra
        no        = wa_msgtab-msgnr
        v1        = wa_msgtab-msgv1
        v2        = wa_msgtab-msgv2
      IMPORTING
        msg       = w_msg
      EXCEPTIONS
        not_found = 1
        OTHERS    = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    CONDENSE w_msg.
    CLEAR wa_messages.
    wa_messages-msgtyp = wa_msgtab-msgtyp.
    wa_messages-message = w_msg.
    wa_messages-werks = wa_file-werks.
    wa_messages-prvbe = wa_file-prvbe.
if wa_messages-message eq 'Formatting error in the field V_PVBE-RGVER; see next message'.
wa_messages-message = 'Invalid name of the person responsible'.
endif.
if wa_messages-message eq 'Formatting error in the field V_PVBE-LGORT; see next message'.
wa_messages-message = 'Enter the storage location'.
endif.
    APPEND wa_messages TO it_messages .
ENDLOOP.
REFRESH it_msgtab.
ENDFORM.                    "collect_messages
*&      Form write_messages
      Display the messages
FORM write_messages .
DELETE ADJACENT DUPLICATES FROM it_messages COMPARING werks prvbe.
LOOP AT it_messages INTO wa_messages .
    WRITE:/1 sy-vline.
    IF wa_messages-msgtyp = 'S'.
      WRITE: 10 icon_green_light.
    ELSEIF wa_messages-msgtyp = 'E'.
      WRITE: 10 icon_red_light.
    ELSEIF wa_messages-msgtyp = 'W'.
      WRITE: 10 icon_yellow_light.
    ENDIF.
    WRITE: 20 sy-vline.
    WRITE : 30 'Plant-', wa_messages-werks .                "#EC NOTEXT
    WRITE: 48 sy-vline.
    WRITE : 49 'Supply Area-', wa_messages-prvbe .          "#EC NOTEXT
    WRITE: 79 sy-vline.
    WRITE : 80 wa_messages-message .
    WRITE: 180 sy-vline.
    WRITE:/1 sy-vline.
    ULINE 1(180).
ENDLOOP.
ENDFORM.                    " write_m
*&      Form fill_params
      Processing mode for the transaction
FORM fill_params .
x_ctuprms-dismode = 'N'.
x_ctuprms-updmode = 'A'.
x_ctuprms-defsize = 'X'.
ENDFORM.                    "fill_params
*&      Form upload
      Upload the excel file and read the data
FORM upload .
*Function to upload excel file
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      filename                = p_file
      i_begin_col             = 1
      i_begin_row             = 2
      i_end_col               = 5
      i_end_row               = 9999
    TABLES
      intern                  = it_excel
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      OTHERS                  = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR wa_file.
*Read the file row-wise
LOOP AT it_excel INTO wa_excel.
    CASE wa_excel-col .
*Read plant
      WHEN '1'.
        wa_file-werks = wa_excel-value.
*Read supply area
      WHEN '2'.
        wa_file-prvbe = wa_excel-value.
*Read decription
      WHEN '3'.
        wa_file-pvbtx = wa_excel-value.
*Read storage location
      WHEN '4'.
        wa_file-lgort = wa_excel-value.
*Read Person responsible
      WHEN '5'.
        IF STRLEN( wa_excel-value ) = 1.
          CONCATENATE '00' wa_excel-value INTO con.
          wa_file-rgver = con.
        ELSEIF STRLEN( wa_excel-value ) = 2.
          CONCATENATE '0' wa_excel-value INTO con1.
          wa_file-rgver = con1.
        ELSE.
          wa_file-rgver = wa_excel-value.
        ENDIF.
    ENDCASE.
    AT END OF row.
      CONDENSE:wa_file-werks,wa_file-prvbe,wa_file-pvbtx,wa_file-lgort,wa_file-rgver.
      APPEND wa_file TO it_file.
      CLEAR wa_file.
    ENDAT .
ENDLOOP.
ENDFORM.                    " upload
*&      Form fill
      Call the transaction 'PK05'
FORM fill .
*Upload the data through transaction 'PK05'
PERFORM fill_params.
LOOP AT it_file INTO wa_file.
    PERFORM bdc_dynpro      USING 'SAPLSVIX' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'D0100_FIELD_TAB-LOWER_LIMIT(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=OKAY'.
    PERFORM bdc_dynpro      USING 'SAPL0PK1' '0020'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_PVBE-PVBTX(01)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=NEWL'.
    PERFORM bdc_dynpro      USING 'SAPL0PK1' '0021'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_PVBE-RGVER'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'V_PVBE-WERKS'
                                  wa_file-werks.
    PERFORM bdc_field       USING 'V_PVBE-PRVBE'
                                  wa_file-prvbe.
    PERFORM bdc_field       USING 'V_PVBE-PVBTX'
                                  wa_file-pvbtx.
    PERFORM bdc_field       USING 'V_PVBE-LGORT'
                                  wa_file-lgort.
    PERFORM bdc_field       USING 'V_PVBE-RGVER'
                                  wa_file-rgver.
    PERFORM bdc_dynpro      USING 'SAPL0PK1' '0021'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'V_PVBE-WERKS'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SAVE'.
    PERFORM bdc_field       USING 'V_PVBE-WERKS'
                                  wa_file-werks.
    PERFORM bdc_field       USING 'V_PVBE-PRVBE'
                                  wa_file-prvbe.
    PERFORM bdc_field       USING 'V_PVBE-PVBTX'
                                  wa_file-pvbtx.
    PERFORM bdc_field       USING 'V_PVBE-LGORT'
                                  wa_file-lgort.
    PERFORM bdc_field       USING 'V_PVBE-RGVER'
                                  wa_file-rgver.
    CALL TRANSACTION 'PK05'
                       USING it_bdcdata
                       OPTIONS FROM x_ctuprms
                       MESSAGES INTO it_msgtab.
    REFRESH it_bdcdata.
    PERFORM collect_messages.
    CLEAR wa_file.
ENDLOOP.
PERFORM write_messages.
ENDFORM.                    " fill

How to have Secure Connection for File Adapter.Pls help

Hi All,
For File to File Scenario
How to have Secure Connection for File Adapter.
Pls send links/blogs explaining this scenario.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

Read an xml file through file adapter?

How do i read an xml file through file adapter?

Hi,
This is pretty straight forward.
Just configure the sender file adapter without any file content conversions.
Read this for more information:
http://help.sap.com/saphelp_nw04/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards,
Ravi

How to update an Excel Sheet through a WebService

Dear All,
Please help me with this query.
Kindly could you guide me on updating an Excel Sheet which is saved on my local server through a WebService which is deployed on the WebApp Server. The Server is located locally too. I have developed the WebService on the NWDS.
I have tried using POI and ODBC for updating the sheet. But it appears to me that the server is unable to fetch the excel sheet.
Please could you provide your valuable suggestions on this.
Regards,
Suyukti B N

Hi,
Thanks for your reply. Below are more details regarding my question. I am trying to achieve the requirement with :
Java WebDynpro (Front End) <--> WebService (Middle Tier) <->ODBC <---> Microsoft Excel (Back End)
1) I am Using the Java perspective to create the service method. The method has to read and update the excel sheet. I have created a ODBC DataSource on my local machine. I also have the SAP WebApp Server on my local machine. Below is the method I am using for "reading" the excel :
public String read(){
Connection connection = null;
String columnValue = "";
        try {
     Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     Connection con = DriverManager.getConnection   ("jdbc:odbc:DS");
                Statement st = con.createStatement();
     ResultSet rs = st.executeQuery("Select * from [Sheet1$]");
     ResultSetMetaData rsmd = rs.getMetaData();
     int numberOfColumns = rsmd.getColumnCount();
     while (rs.next()) {
     for (int i = 1; i <= numberOfColumns; i++) {
         if (i > 1)                           System.out.print(", ");                columnValue = rs.getString(i);
     System.out.println("value is" + columnValue);
     st.close();
     con.close();
          } catch (Exception ex) {
          System.err.print("Exception: ");
          System.err.println(ex.getMessage());
          return "false" + ex.toString();
     return "true";
This code works perfectly fine and provides me the values that are present on the Excel Sheet.
2) I now switch over from the Java Perspective to the WebService Perspective on my NetWeaver Developer Studio. I create a new WebService for the above Java method.
3) I then create an Ear file and deploy on the Server.
4) Now when I click on Test WebService, the values that are returned from the Excel are "null". It shows return String as False and an SQL Exception. java.sql.SQLException: General error.
Hence I concluded that after deploying the Service on the Server, the Excel Sheet is not being fetched or read.
Please could you provide your thoughts on this.
Thank You Very Much,
Warm Regards,
Suyukti B N

Open excel sheet through program calculate value and fetch value in program

Hi experts,
My requirement is to open a excel sheet while i execute a report,There is some calculation that i need to do in excel sheet and want to fetch the calculated value back in to my program.
Is there any way of doing so ?
Regards,
Kashyap

Hi Aditya ,
let me once more clarify with ur requirements .
User is uploading an excel sheet.
U doing validations on the records and getting the error in records.
Displaying the uploaded excel sheet to user to rectify the errors.
and then update the databse with the correct records.
So for the above
use WS_upload ,GUI_Upload FM for uploading the excel sheet in itab.
using this itab ,Dynamically add one more column for the errors.
Refer :Re: Could anyone tell me how can I add columns in a internal table dynamically?
Display records in an editable ALV grid.
BCALV_EDIT_01
BCALV_EDIT_02
BCALV_EDIT_03
BCALV_EDIT_04
BCALV_FULLSCREEN_GRID_EDIT
BCALV_GRID_EDIT
BCALV_TEST_GRID_EDIT_01
BCALV_TEST_GRID_EDITABLE
Also see this
http://www.sapdevelopment.co.uk/reporting/alv/alvscr.htm
then update the database
Regards
Renu
Edited by: Renu Gusain on May 8, 2009 8:40 AM

How To split large message using File Adapter

Hello everyone,
Here is my scenario FTP > XI > BI.
I got 2 questions:
(1) I am getting large message around 70 MB file.
    How we can split the message into multiple files 10 MB each before processing the file into XI?
(2) Is there is any way we can find out size of file which is on FTP without contacting FTP admin?
    through XI before processing the file?
Thanks
Vick

hi vick,
check the blog
Zip or Unzip your Payload with the new PayloadZipBean module of the XI Adapter Framework
Working with the PayloadZipBean module of the XI Adapter Framework
SAP XI acting as a (huge) file mover
The specified item was not found.
Managing bulky flat messages with SAP XI (tunneling once again) - UPDATED
The specified item was not found.
regards
kummari

How to add fault handling for file adapter??

Hi guys I am new to SOA technology ,I have one scenario in file adapter ,when file adapter reads a file from directory .If file is there then read the file data else it can give user defined exception that the file is not there .How can i write user defined exception in SOA?? Give me any ideas please.............
Thanks in advance..

So, you want to (1) Fetch the data from these 3 type of files and (2) Also, store the payload data of the file, which is in XML format, into the same database tables ?
If this is the requirement.. then, I would say, you could :
(1) Read files using file adapter, but not as opaque.. Define schemas conforming to the file structures. In that way, you'll always have the file data read in the form of XML.
(2) Fetch relevant data from such XML payloads of files and insert into database tables. Then, insert the XML payload into WHO column. You might have to convert the xml data into blob/clob before inserting.
Job done !

Print my input which i accept in my procedure in Excel Sheet through pl/sql

Respected Sir,
If i want to print my input in excel sheet which i took as a input parameter for my procedure
for example my procedure:
create or replace procedure create_csv('hello this is wonder world').
I want to print hello this is wonder world in excel sheet.
How can i acheive this through pl/sql procedure. with out utl_file predefined package.
Please help me regarding this.
Sincerely,
Chandrasekhar B.S.

maybe this link accessing oracle via access and excel might be of some help.

How To Edit Excel or Word Files Using iPhone?

I am trying to do SIMPLE edits of Excel or Word files...
in my emails I can view them, but not able to edit them...
-Glenn

Not necessarily. The problem is that the SDK forbids saving data to the iPhone itself. That means, if you write a letter, say, and save it, you can only save it via the internet to either a server (like iDisk) which you can then access on your desktop, or through a program like Google Documents.
Until Apple permits saving files to your iPhone itself for direct sync (which is currently forbidden) you need to use 3rd party workarounds. I have no idea what Dataviz is working on, nor whether it will be approved once they do complete a program, nor how you will have to save data.
WIthout being able to save data for sync directly through your iPhone itself rather than the internet, it really makes editing on the iPhone end of the deal pretty worthless for a lot of is.
I use OmniFocus for my To-Do lists, for example. It does not sync directly with the desktop version, but you have to sync your desktop with the server (in my case iDisk) and the iPhone with the Server -- it keeps both my iPhone and Desktop in sync, but ONLY works because data is stored on iDisk as the "library" so to speak....if I were to be in an area without data access, I would not be able to keep up-to-date to-do lists.

How to fetch Excel sheet through File adapter in SAP PI?

Similar Messages

Maybe you are looking for