Print my input which i accept in my procedure in Excel Sheet through pl/sql
Respected Sir,
If i want to print my input in excel sheet which i took as a input parameter for my procedure
for example my procedure:
create or replace procedure create_csv('hello this is wonder world').
I want to print hello this is wonder world in excel sheet.
How can i acheive this through pl/sql procedure. with out utl_file predefined package.
Please help me regarding this.
Sincerely,
Chandrasekhar B.S.
maybe this link accessing oracle via access and excel might be of some help.
Similar Messages
-
Field length shows more in excel sheet which is sent via email
I am sending excel sheet through email. I have data in internal table which i move to the email internal table and data is been sent via email using a excel sheet.
Now, when I open the excel sheet, i see that all fields get displayed but the last field is shown as too much length meaning field length is 15 chars but in excel sheet it shows as almost 40 - 50 chars.Decalre one more field in your internal table ,which should be last field.
and do not pass header for this field and just pass the empty value to this field.
if not use this FM : EXCEL_OLE_STANDARD_DAT
Reward Points if it is helpful
Thanks
Seshu -
How to Print the Excel Sheet From Labview??
Hii Every body,,
Actually i am logging my data to Excel Template..... Now in my front panel i will select that excel file and give print... Now automatically the datas in the excel sheet have to get printed with out opening the excel sheel... how to do?? can any 1 suggest me??I think you can get many/most of your answers here in the Excel Board thread in Breakpoint forum.
- Partha
LabVIEW - Wires that catch bugs! -
[Solved] CUPS: Unable to write print data: Input/output error
I'm filling this for the benefit of those poor googlers that can reach here.
Symptoms: After trying to print a "complex" image the printer made too much breaks, and failed.
The problem is, it then didn't came up. I mean, I restarted the printer, cupsd, the whole system, and nothing.
I was unable to print again, it showed "Unable to write print data: Input/output error" and refused to print anything.
I then saw that in /etc/cups I had printers.conf and printers.conf.O files, which differed (other than in StateTime), that printers.conf.O had
State Idle
but printers.conf had:
State Stopped
StateMessage Unable to write print data: Input/output error
Reason paused
Probably due to the ErrorPolicy being stop-printer.
So seeing I followed the following steps:
Stop cups
Replace printers.conf with printers.conf.O (I could also had manually edited it)
Start cups
It then went working flawlessly.
There was probably an option in the web interface combobox for doing that. The problem is that I didn't realise it was stopped, so didn't know how to make it work. Moreover, some posts in the web recommended reinstalling the printer (which would skip the problem by creating a new printer).I think that I had this same problem, and fixed it by reinstalling the printer. Thank you for your post.
-
I Have an HP Deskjet Ink Advantage 3525 e-All-in-One Printer which uses HP 670 cartridges when I was at Best Buy in Arlington VA, looking for cartridges no one ever heard of them so we found HP 564 which list Deskjet 3525 as one of the printers they can be used but I get the the following error messages 'Incompatible Cartridges' when I was looking in the HP support web site i came accros the following coment "HP will not supply new replacement cartridges for your printer, but will help to reset your printer so that it will accept the cartridges that are available in your new country." so can my printer be changed to use HP 564 cartridges.
Hi there,
I understand you're having issues with your HP 3525 printer. I will certainly do my best to assist you with these issues.
You can perform a hard reset on your printer to help get rid of the ink depleted error. You can also try the steps in this cartridge troubleshooting document. These steps will hopefully rid your printer of the depleted ink error if it's a false error.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP -
How can i print only pages which have been highlighted, from a multi page file?
How can i print only pages which have been highlighted, in a multi page file.
Ah, I see want you mean. This might not be practical for you, but if you select one instance of the highlighted text and add a [space] to the little sticky note, all of the highlighted text on that page will appear in the summary.
-
How to directly print PDF file(which is stored in SAP) in ABAP report?
Hi experts,
I searched SDN for printing PDF file but everything is about OTF to PDF and to use fm: CONVERT_OTF which is not the solution for my problem.
I have to build ABAP report which will take the PDF file attached to SAP document (CV02N) and print it.So, which function module or program can I use to print the PDF file?
Thank you very much.
Kind regards,
DanijelaDear
this is the code for down load smartform for PDF format. its working properly
2nd way is
set your Acrobat Printer as your default printer
when you print select printer as LOCAL
then you will file dialog box for Naming PDF
DATA : T_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE.
DATA : WA_CTRLOP TYPE SSFCTRLOP.
DATA : WA_OUTOPT TYPE SSFCOMPOP.
DATA : T_OTFDATA TYPE SSFCRESCL.
DATA : T_PDF_TAB LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA : V_FILESIZE TYPE I.
DATA : W_BIN_SIZE TYPE I.
WA_CTRLOP-GETOTF = 'X'.
WA_CTRLOP-NO_DIALOG = 'X'.
WA_OUTOPT-TDNOPREV = 'X'.
CALL FUNCTION P_LV_FNAME
EXPORTING
OUTPUT_OPTIONS = WA_OUTOPT
USER_SETTINGS = 'X'
CONTROL_PARAMETERS = WA_CTRLOP
IMPORTING
JOB_OUTPUT_INFO = T_OTFDATA
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
T_OTF[] = T_OTFDATA-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = W_BIN_SIZE
TABLES
OTF = T_OTF
LINES = T_PDF_TAB
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
DATA : LV_DOWN_FILE TYPE RLGRAP-FILENAME.
DATA : LV_TEXT TYPE STRING.
CASE SSCRFIELDS-UCOMM.
WHEN 'REPRUNMOLD'.
CONCATENATE '(' SO_SCHDT-LOW '-' SO_PLANT-LOW ')' INTO LV_TEXT.
CONCATENATE '\\lkdb01\FTP-Loadstar\0.PP_Planning\ZPP014\Run_Moulds\' SY-DATUM '-' SY-TIMLO '-' 'Running Mould' '-' LV_TEXT '.pdf' INTO LV_DOWN_FILE SEPARATED BY SPACE.
WHEN 'REPLINESIT'.
CONCATENATE '(' SO_SCHDT-LOW '-' SO_PLANT-LOW '-' SO_LINE2-LOW ')' INTO LV_TEXT.
CONCATENATE '\\lkdb01\FTP-Loadstar\0.PP_Planning\ZPP014\Line_Situation\' SY-DATUM '-' SY-TIMLO '-' 'Line Situation' '-' LV_TEXT '.pdf' INTO LV_DOWN_FILE SEPARATED BY SPACE.
ENDCASE.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_BIN_SIZE
FILENAME = LV_DOWN_FILE
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = V_FILESIZE
TABLES
DATA_TAB = T_PDF_TAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE 'File not downloaded succesfully' TYPE 'I'.
EXIT.
ELSE.
MESSAGE 'PDF File downloaded succesfully' TYPE 'I'.
ENDIF.
ENDFORM. " Print_PDF
Rewards if useful. -
hi, i created and bought a 74 pages book on iPhoto that costs me around 96 euros. It was delivered with a all 2 pages badly printed. It is not acceptable that there is no quality control at this level of price.I am very disappointed and won't buy again!!!
except this major point i must admit the quality is quite good , but a bick lack of quality control and a customer disapointed at the end.
On the internet site it is not possible to send it back. So apple doesn't want to take in account that they mail sometimes fail, and want to satisfy their customer, because you have no other choice that accepting it.
best regardsYes it is returnable.
http://store.apple.com/us/help/returns_refund
That's for the US, there's a similar one for your country. -
I have redeemed my iTunes giftcard (which was accepted without verification; it only needed my password)
However when I tried to make a purchase, I am required to verify my identity, and thus I cannot use the giftcard which I HAVE REDEEMED. Is there any way I can un-redeem it? I am currently trying to enter all of the possibilities for my questions, and my iPad is new, so the serial number is not registered with my account. According to support, no purchases have been made in my account, so I can't verify my identity through credit card. Please help!~You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
If you just want to have the card un-redeemed, use the form.
(123638) -
My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?
Get an HDMI switcher. Plug in the ATV directly to the TV and then use the switcher on the other input.
Example
http://www.amazon.com/Ultra-High-Performance-Switcher-Switch/dp/B0015YWKYY/ref=s r_1_1?ie=UTF8&qid=1316918064&sr=8-1 -
How can I read an input which only contain the 26 upper case letter
Are there any method that can read an input which only contain 1 character and it is in upper case too.
should I use readChar( ), or readString( )??
How should I implement them if I do use one of them?
thxTry this :
import java.io.*;
public class Read
public static void main(String[] x)
System.out.println("Upper case char typed : "+readUpperCaseChar());
public static char readUpperCaseChar()
// method that read char and return the last upper case char
char x='\0',tmp='\0';
try
while(tmp!='\n')
tmp=(char) System.in.read();
if(tmp >= 'A' && tmp <= 'Z')
x=tmp;
catch(IOException ioex)
ioex.printStackTrace();
return x; -
I want to print an email which has multi pages but I can only print the first page
Can anyone help please?
i want to print an email which has multi pages but I can only print the first page
TonyFirefox cuts off the URL in your printout, if it's really long, and you also have on the same line (header or footer), the Date and Pages
What I have summarized below is based on this page . . . http://www.watchingthenet.com/how-to-change-or-customize-firefox-printing-defaults.html
I have two questions:
To fix, do a custom setting, for the Header and Footer as follows:
Print / Page Setup / Margins & Header/Footer / "Customize" the "Left" as follows (leave Center and Right all blank)
&T
&U . . . . . . . &D . . . . . . . &PT
&D shows the Short date as: M/d/yyyy - and then the time
To change the format of the Short date in Win 8.1, go to:
Control Panel / Date and Time / Date and Time tab / Change date and time / Change calendar settings /
Date / Short date . . . change from M/d/yyyy . . . to . . . MM/dd/yy
QUESTIONS:
1.) How do you get rid of the time, which appears after the date? In IE, you use a lowercase "d" - but that doesn't work here.
2.) Is there a way to change the font just for the Header and Footer, to something like Microsoft Sans Serif 10?
Firefox leaves no room around the text in the Header and Footer at the edge. To fix:
Address Bar / about:config
Enter keyword "edge"
Then change all four values for the printer you're using to:
print.printer_Foxit_PhantomPDF_Printer.print_edge_bottom . . . 5
print.printer_Foxit_PhantomPDF_Printer.print_edge_left . . . 10
print.printer_Foxit_PhantomPDF_Printer.print_edge_right . . . 10
print.printer_Foxit_PhantomPDF_Printer.print_edge_top . . . 5 -
Im trying to install new drivers for my printer and it will not accept my password
Im trying to install new drivers for my printer and it will not accept my password
Hey fyermanbob,
Thanks for using Apple Support Communities.
OS X Mavericks: If your administrator password was not accepted
http://support.apple.com/kb/PH14014
Have a nice day,
Mario -
Using Javax.print I have to print the data which are stored in resultsets.
Using Javax.print I have to print the data which are stored in resultsets.
Actually we ar working on a project where n numbers of records are fetched from database and stored in Resultsets. We made JSF pages which displayes the records in Web Browser.
There is a link in that page. If we click that print link, It has to be printed all the records row by row using javax.print. It should act like Printer friendly in browser.
Kindly send us any example code to proceed.Is it possible to access the cache datasource inside the script component which is available in the same data flow task??
Thanks in advance,
Saravanan -
I have bought used I phone 4s. I cloud fails to accept my apple ID, which is accepted by apple store and I tuned.
It says that I have already used maximum number of user accounts. Kindly help to resolve this problem.Hello Renvin29,
It sounds like you need to disable your iPhone remotely. I'm sorry to hear about your phone! The only way to do this with is Apple services is if you had Find my iPhone enabled. You have 2 options:
You can use this article to put the phone into Lost Mode and preserve your data on it, but prevent access to it:
iCloud: Use Lost Mode
http://support.apple.com/kb/PH2700
Or you can just erase it remotely outright:
iCloud: Erase your device
http://support.apple.com/kb/PH2701
You should also take a look at this article for additional info on what to do about this situation:
If your iPhone, iPad, or iPod touch is lost or stolen
http://support.apple.com/kb/HT5668
Thank you for using Apple Support Communities.
Take care,
Sterling
Maybe you are looking for
-
Webpage not visible to everyone
Hi there. I've done a website using DW8, created a template from which overview.htm was created: http://www.nechc.com/overview.htm All the files are on the server, I can view the page and others on the site from my home computer and on computers are
-
Problem Creating DataStore in DS with ECC 6.0 as datasource
Dear experts, I was unable to create this DataStore on DataServices on this Windows 2003 SP2 machine. My source system is ECC 6.0. I get "Cannot establish database connection. .... Please make sure SAP server is running and the login information is c
-
Report showing Discovery configurations
I'm looking for a way to use a report or SQL query to get Discovery info on a hierarchy of SCCM servers (Region (multiple Domain) tier, Domain tier, and site Tier--report to be run at the Region tier). Is there a View or Table that will list the LDAP
-
When i tried to download iOS8 on my iPad Mini it told me that I needed to connect my iPad to iTunes, I have done that and now it says I need to restore my iPad. How can I get my iPad working without losing everything on my iPad? I don't want to lose
-
Lightroom Export Loosing Sharpness.
Hi, I would like to get to the bottom of this Lightroom issue. Left is Lightroom, the right is 20k mb JPG export. I have 30mb Raw/Nef images from my Nikon d7100. Aftter editing in lightroom, applying sharpness and clarity (not overly though) as well