How to filter repeated qty of item

Hi BW Expert
I have a query based on the InfoSet. Since one delivery note item could have more than one invoice items or shipment cost items, the qyt of DN item is repeated.
for example:
DN--DN itemDelivery qtyInvoice No.-Invoice Item---Invoice value
100046---000110090000110--
26
100--20--
32
100--30--
58
How can I avoid the repeated delivery qty (100) in the report?

Does anybody meet the same problem?

Similar Messages

How to filter data by list item

hi all,
I create list item on block BLK1 ,
name :emp_name
item type: list item
elements in list : list_elements : (null) list_item : (null)
data type : Char
maximum length : 200
and create PROCEDURE :
PROCEDURE POPULATE_LIST_BY_QUERY(P_LIST_NAME VARCHAR2,P_QUERY VARCHAR2) IS
   RG_NAME VARCHAR2(30) := 'RG_CODE_DESC' ;
   RG_ID    RecordGroup;
   errcode NUMBER;
   LIST_ID ITEM;
BEGIN
     RG_ID := FIND_GROUP(RG_NAME);
     IF NOT ID_NULL (RG_ID)
        THEN DELETE_GROUP (RG_ID) ;
     END IF;
     RG_ID   := Create_Group_From_Query (RG_NAME, P_QUERY) ;
     errcode := Populate_Group (RG_ID) ;
     LIST_ID := FIND_ITEM (P_LIST_NAME) ;
     POPULATE_LIST (LIST_ID,RG_ID) ;
END;and wrote in trigger WHEN_NEW_FORM_INSTANCE:
POPULATE_LIST_BY_QUERY('BLK1.emp_name', 'SELECT emp_name,emp_id FROM employees');
create table employees
(emp_no number(10) primary key,
emp_name varchar2(200))
Insert into EMPLOYEES
   (EMP_NO, EMP_NAME)
Values
   (1, 'hhh uuo');
Insert into EMPLOYEES
   (EMP_NO, EMP_NAME)
Values
   (2, 'hh ppp');
Insert into EMPLOYEES
   (EMP_NO, EMP_NAME)
Values
   (3, 'ph');
Insert into EMPLOYEES
   (EMP_NO, EMP_NAME)
Values
   (4, 'uuuuu');
COMMIT;when Run my form list item give me all data, no problem ,ok
My question is that can i want to filter data when write anythnig data is found im my list or part of data,
show data only by my filter,
for example:
I wrote in my list : hh
show data in list:
hhh uuo
hh ppp
I wrote in my list : h
show data in list:
hhh uuo
hh ppp
ph
I wrote in my list : uu
show data in list:
uuuuu
if not wrote anything fetch me all data,
Thanks a lot

Hi,
You can try,
POPULATE_LIST_BY_QUERY('BLK1.EMP_NAME', 'SELECT EMP_NAME, EMP_ID FROM EMPLOYEES WHERE EMP_NAME LIKE ''' || <your_search_variable> || '%''');Hope this helps.
Regards,
Manu.

How to filter repeated words or phrases?

Hello,
I'm compiling a list of words for a project and I need to be able to select one column, containing over 1,000 words and phrases, and filter out any repeated words or phrases and have it generate a list that doesn't contain repeats in another column, can anyone help me with this?
Thanks in adavnce!
Vince

An automatic way which will put blanks in place of duplicates is as follows (assuming column B is your list of words):
C2=IF(COUNTIF(B$2:B2,B)=1,B2,"")
fill down to end of the column
All these COUNTIF formulas will make your document very slow.
There are, I'm sure, other ways to do this. If you haven't done it already, try searching the forum.
Message was edited by: Badunit

R12: How to filter Open Item Revaluation Report based on GL Date

Hi,
Anybody know how to filter Open Item Revaluation Report based on GL Date from and GL Date to in R12?
Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included the old data from 8 years ago also.
We need to run the report only for specific date only. Please share with me if anyone know about this.
Thanks.

Pl do not post duplicates - R12: How to filter Open Item Revaluation Report based on GL Date

How to cancel the event in Item Adding and display javascript message and prevent the page from redirecting to the SharePoint Error Page?

How to cancel the event in Item Adding without going to the SharePoint Error Page?
Prevent duplicate item in a SharePoint List
The following Event Handler code will prevent users from creating duplicate value in "Title" field.
ItemAdding Event Handler
public override void ItemAdding(SPItemEventProperties properties)
base.ItemAdding(properties);
if (properties.ListTitle.Equals("My List"))
try
using(SPSite thisSite = new SPSite(properties.WebUrl))
SPWeb thisWeb = thisSite.OpenWeb();
SPList list = thisWeb.Lists[properties.ListId];
SPQuery query = new SPQuery();
query.Query = @"<Where><Eq><FieldRef Name='Title' /><Value Type='Text'>" + properties.AfterProperties["Title"] + "</Value></Eq></Where>";
SPListItemCollection listItem = list.GetItems(query);
if (listItem.Count > 0)
properties.Cancel = true;
properties.ErrorMessage = "Item with this Name already exists. Please create a unique Name.";
catch (Exception ex)
PortalLog.LogString("Error occured in event ItemAdding(SPItemEventProperties properties)() @ AAA.BBB.PreventDuplicateItem class. Exception Message:" + ex.Message.ToString());
throw new SPException("An error occured while processing the My List Feature. Please contact your Portal Administrator");
Feature.xml
<?xml version="1.0" encoding="utf-8"?>
<Feature Id="1c2100ca-bad5-41f5-9707-7bf4edc08383"
Title="Prevents Duplicate Item"
Description="Prevents duplicate Name in the "My List" List"
Version="12.0.0.0"
Hidden="FALSE"
Scope="Web"
DefaultResourceFile="core"
xmlns="http://schemas.microsoft.com/sharepoint/">
<ElementManifests>
<ElementManifest Location="elements.xml"/>
</ElementManifests>
</Feature>
Element.xml
<?xml version="1.0" encoding="utf-8" ?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Receivers ListTemplateId="100">
<Receiver>
<Name>AddingEventHandler</Name>
<Type>ItemAdding</Type>
<SequenceNumber>10000</SequenceNumber>
<Assembly>AAA.BBB, Version=1.0.0.0, Culture=neutral, PublicKeyToken=8003cf0cbff32406</Assembly>
<Class>AAA.BBB.PreventDuplicateItem</Class>
<Data></Data>
<Filter></Filter>
</Receiver>
</Receivers>
</Elements>
Below link explains adding the list events.
http://www.dotnetspark.com/kb/1369-step-by-step-guide-to-list-events-handling.aspx
Reference link:
http://msdn.microsoft.com/en-us/library/ms437502(v=office.12).aspx
http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspx
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

Recommended way for binding the list event handler to the list instance is through feature receivers.
You need to create a feature file like the below sample
<?xmlversion="1.0"encoding="utf-8"?>
<Feature xmlns="http://schemas.microsoft.com/sharepoint/"
Id="{20FF80BB-83D9-41bc-8FFA-E589067AF783}"
Title="Installs MyFeatureReceiver"
Description="Installs MyFeatureReceiver" Hidden="False" Version="1.0.0.0" Scope="Site"
ReceiverClass="ClassLibrary1.MyFeatureReceiver"
ReceiverAssembly="ClassLibrary1, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=6c5894e55cb0f391">
</Feature>For registering/binding the list event handler to the list instance, use the below sample codeusing System;
using Microsoft.SharePoint;
namespace ClassLibrary1
    public class MyFeatureReceiver: SPFeatureReceiver
        public override void FeatureActivated(SPFeatureReceiverProperties properties)
            SPSite siteCollection = properties.Feature.Parent as SPSite;
            SPWeb site = siteCollection.AllWebs["Docs"];
            SPList list = site.Lists["MyList"];
            SPEventReceiverDefinition rd = list.EventReceivers.Add();
            rd.Name = "My Event Receiver";
            rd.Class = "ClassLibrary1.MyListEventReceiver1";
            rd.Assembly = "ClassLibrary1, Version=1.0.0.0, Culture=neutral,
                PublicKeyToken=6c5894e55cb0f391";
            rd.Data = "My Event Receiver data";
            rd.Type = SPEventReceiverType.FieldAdding;
            rd.Update();
        public override void FeatureDeactivating(SPFeatureReceiverProperties properties)
            SPSite sitecollection = properties.Feature.Parent as SPSite;
            SPWeb site = sitecollection.AllWebs["Docs"];
            SPList list = site.Lists["MyList"];
            foreach (SPEventReceiverDefinition rd in list.EventReceivers)
                if (rd.Name == "My Event Receiver")
                    rd.Delete();
        public override void FeatureInstalled(SPFeatureReceiverProperties properties)
        public override void FeatureUninstalling(SPFeatureReceiverProperties properties)
}Reference link: http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspxOther ways of registering the list event handlers to the List instance are through code, stsadm commands and content types.
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

Report workload by calculating how many versions of SharePoint list items created in a certain time period

I have a total of 66 SharePoint 2010 lists - yes, 66! - each lists contains between 1500 and 3200 list items. My employees update these various list items throughout their workday. Each update to a list item creates a new version of the list
item. On average each list item will have anywhere from 5 to 10 versions before it is done. I need to create a report that tells me how many list items they've updated in a certain time frame. I have come close but still cannot arrive at
the data I'm looking for.
This is what I have so far:
I've created a report using SQL Report Builder 2008 v3 where I've filtered it to show only items MODIFIED between, for example, Feb1 and Feb28. Of those records, I want the report to tell me how many versions were created during that time
frame. The result is one list item with 5 total versions. Versions 1.0, 2.0, & 3.0 were created on 12/12/14. The last two versions, 4.0 and 5.0, were created on 2/24/15. Therefore, the answer I'm looking for is 2 because they
created 2 versions between Feb1 and Feb28.
However I get the following results using these queries:
If I do a =Sum(Fields!owshiddenversion.Value) in the expression field I get the total versions which is 5
If I do a =Count(Fields!owshiddenversion.Value) in the expression field I get the instance which is 1
Is there a way to count ONLY the number of versions created in a time period? Is there another hidden field in SharePoint that I can use in the expression that will give me results I'm looking for?

Hi Rafael70,
Per my understanding that you have already get all the need fields and informaiton of the updated version of list items and now you want to calculate how many versions of SharePoint list items created in a certain time period, you can't get desired result
using sum and count function, right?
I have tried to tested on my local environment but because I am not clear what is value in the field "owshiddenversion", I assumed you have two datatype parameters (StartDate and EndDate) to help filter the report in a certain time period.
Generally, if you have add the filter correctly, it will filter the correct number's updated version in this time period, I would like you to provide details information as below to help better analysis the requirements:
Could you please provide sample data of the table.
Please provide snapshot of the report structure you have currently designed.
Please try to provide all the expression you have used.
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

How to filter View Objects on Main Page - Unbounded Task Flow

Hi All,
Version: 11.1.1.4
I have a scenario where I am trying to filter the Employee information by EmployeeID and show their related Items. I can do this if I encapsulate Employee and / or Items in bounded task flows and expose their view Criteria in methods that I am setting on the App Module. I could also add the bind variable to the View Object queries. The problem I am having is that I want to display a pop up based on the item they select. My issue is that I can't seem to figure out how to either grab the item row selected and pass it to the pop up (Can't create a control flow from a page fragment to a page - which as far as I can understand the pop up in the task flow has to be a page and not a page fragment) or drop the employee view object and item view object on the main page and have them be filtered.
So basically two issues:
1. If I use the Employee and Item bounded task flows and place them as regions on the main page then I am having difficulties passing the row selection (item selected) and pass it to my pop up window (another task flow).
2. If I place the employee and item view objects on my main page the original methods I am using to filter the data are not getting called at all. I have tried placing them in the adf-config task flow prior to my main page view and going into my main page page def and adding them as method calls in the binding.
I am sure I am doing something wrong or maybe even creating an invalid approach, but I should be able to filter my employee and item data on load within my unbounded task flow or use the data within my bounded task flows and generate a popup with data I am collecting from my item row.
As always greatly appreciate the feedback....still really ignorant with ADF.
--S

I figured out the issue Shay. I didn't have my pageFlowScope value set on the task-flow-call. So I had the parameter name and value set on the input of my downstream bounded task flow, but when I add the control to call the task flow I didn't have the task-flow call value set. That piece was not intuitive to me. It makes sense that it would have to know how to pass the value.....just wasn't sure where it should be set.
--S

How to filter the Rest Api data based on Taxanomy columns

Hi Everyone,
We are using SharePoint2010 Standard Edition.
I wanted get the library details through REST Api. I am using as below:
https://SiteUrl/_vti_bin/listdata.svc/Documents?$filter=Title eq 'SharePointDoc'
Here I am able to get the info regarding "SharePointDoc". But when I am trying to get the details from Taxonomy filter, it didn't.
Can anyone please tell me how can we filter based on Taxanomy fields.
Thanks in Advance
Krishnasandeep

Hi,
I understand that you wanted to filter the Rest Api data based on Taxanomy columns.
Per my knowledge, in SharePoint 2010 , not all types of column are available via REST, most annoyingly managed metadata columns are amongst this group of unsupported column types.
However, in SharePoint 2013, we can filter list items based on taxonomy (managed metadata) columns.
Taxonomy fields can be now called via REST API using CAML query in REST calls.
Here is a great blog for your reference:
http://www.cleverworkarounds.com/2013/09/23/how-to-filter-on-a-managed-metadata-column-via-rest-in-sharepoint-2013/comment-page-1/
You’d better to change the REST calls and the CAML query to check whether it works in SharePoint 2010.
More information:
http://platinumdogs.me/2013/03/14/sharepoint-adventures-with-the-rest-api-part-1/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to filter datagridview from 3 textboxes?

hey, would you help me
so, i have a form and connects to mdb database.
this is my code
Imports System.IO
Imports System.Data.OleDb
Public Class Form1
Private DBPath As String
Private conn As OleDbConnection
Private adapter As OleDbDataAdapter
Private dtMain As DataTable
Public Sub New()
InitializeComponent()
End Sub
Private Sub Form1_Load(ByVal sender As Object, ByVal e As EventArgs) Handles MyBase.Load
DBPath = Application.StartupPath + "\db.mdb"
If Not File.Exists(DBPath) Then
Dim cat As New ADOX.Catalog()
cat.Create(Convert.ToString("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=") & DBPath)
cat = Nothing
End If
conn = New OleDbConnection(Convert.ToString("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=") & DBPath)
conn.Open()
Try
Using cmd As New OleDbCommand("CREATE TABLE [Table_1] ([id] COUNTER PRIMARY KEY, [text_column] MEMO, [int_column] INT);", conn)
cmd.ExecuteNonQuery()
End Using
Catch ex As Exception
If ex IsNot Nothing Then
ex = Nothing
End If
End Try
Using dt As DataTable = conn.GetSchema("Tables")
For i As Integer = 0 To dt.Rows.Count - 1
If dt.Rows(i).ItemArray(dt.Columns.IndexOf("TABLE_TYPE")).ToString() = "TABLE" Then
ComboBoxTables.Items.Add(dt.Rows(i).ItemArray(dt.Columns.IndexOf("TABLE_NAME")).ToString())
End If
Next
End Using
End Sub
Private Sub button1_Click(ByVal sender As Object, ByVal e As EventArgs) Handles Button1.Click
If ComboBoxTables.SelectedItem Is Nothing Then
Return
End If
adapter = New OleDbDataAdapter("SELECT * FROM [" + ComboBoxTables.SelectedItem.ToString() + "]", conn)
Dim builder = New OleDbCommandBuilder(adapter)
dtMain = New DataTable()
adapter.Fill(dtMain)
DataGridView1.DataSource = dtMain
End Sub
End Class
and now i have 4 textbox and 4 column table of database.
for example, this is my table :
and if i type :
textbox 1 : "1"
textbox 2 : "2"
textbox 3 : "1" then i press button2.
the result is textbox4 display : "C"
other example, if i type textbox1 : "3", textbox2 : "3", textbox3 : "2" then textbox4 diplay "J".
of course, if i type textbox1 : "3", textbox2 : "3", textbox3 : "2" then i'll get msgbox "max for column 2 is 2" or
if i type textbox1 : "3", textbox2 : "4", textbox3 : "2" i'll get msgbox "max of column 1 is 3"
well, now im stuck, how to filter this.
thanks before. sorry for bad english.

Hello,
The following uses Lamda and LINQ to query three text box controls where each one has a unique tag value, TextBox1.Tag = 1, TextBox2.Tag = 2, TextBox3.Tag =3. The Tag is used to dictate the order of the columns in the where condition.
In values, a where condition is used to determine any TextBox controls with Text then in the select I create a condition suitable for use in the SQL SELECT. In the variable WhereClause the conditions are combined. There is one or more conditions they are
appended to the SQL statement.
Now if we have to deal with columns of type string we need to surround them in apostrophes which opens up a can or worms if a string contains apostrophes so food for thought.
Code suitable for VS2012 or higher, for VS2010 line continuation is needed.
''' <summary>
''' Each TextBox (three of them) have their tag set to 1,2,3 for ordering columns
''' in the where clause.
''' The Where conditions are using "and", you can also do "or" instead
''' </summary>
''' <remarks></remarks>
Public Class Form1
Private Sub Button1_Click(sender As Object, e As EventArgs) _
Handles Button1.Click
Dim SelectStatement As String = "SELECT * FROM SomeTable"
Dim Values = Me.Controls.OfType(Of TextBox).Where(
Function(tb) Not String.IsNullOrWhiteSpace(tb.Text)).Select(
Function(tb)
Return New Item With
.Index = CInt(tb.Tag),
.Value = tb.Tag.ToString & " = " & tb.Text
End Function).ToList.OrderBy(Function(item) item.Index)
Dim WhereClause = String.Join(" and ",
(From T In Values Select T.Value).ToArray)
If Not String.IsNullOrWhiteSpace(WhereClause) Then
SelectStatement &= " WHERE " & WhereClause
Else
' Nothing to append
End If
Console.WriteLine(SelectStatement)
End Sub
End Class
''' <summary>
''' Strong type data in the select part of the
''' lambda statement above
''' </summary>
''' <remarks></remarks>
Public Class Item
Public Property Index As Integer
Public Property Value As String
Public Sub New()
End Sub
End Class
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

How to filter certificate templates in Certificate Authority snap-in with the correct values

How to filter certificate templates in Certificate Authority snap-in with the correct values
I have a 2012 R2 server running Microsoft Certificate Authority snap-in.
I want to do a filter on a specific Certificate Template which i know exists in the 'Issued Certificates' folder.
All the documentation i can find seems to suggest i copy the certificate name and use this in the View Filter.
1). I add the 'Certificate Template' option into the Field drop-down.
2). I leave the Operation as the '=' symbol
3). I paste in just the name of the template in question. for example: 'my computers'
The search results always come back blank 'There are no items to show in this view.' even when i know there are many instances of this template. I've tried on a win 2008 server and same issue.
Is there a correct value to enter for the Certificate Template name?
Can this be done easier using certutil commands?
When i run the certutil tool i can confirm i have several issued templates. Certutil -catemplates -v > c:\mytemplate_log.csv
Anybody know what i'm doing wrong?
I seem to be getting nowhere with this one.

> But its important you are using the template name, not the display name
this is incorrect. OIDs are mapped to *display name*, not common name (it is true for all templates except Machine template). That is, in order to translate template name to a corresponding OID, you need to use certificate template's display name. And, IIRC,
template name in the filter can be used only for V1 templates. For V2 and higher, OID must be used.
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.

How can Filter ADF BC LOV values in ADF Faces UI?

How can Filter ADF BC LOV values in ADF Faces UI?
Hi i am bit struggle with filtering LOV values in ADF Faces UI.
I have table In UI ,that is from ADF BC .Now i am Filtering that table data using Select one choice in same page.That SOC is named Type App: ,So according to selection of Type in SOC table have to display.This portion is done.But my requirement is ,when i got perticular result table ,i want to add one more row related to that type only,so for that i had take popup and drag datacontrol as a form.In that form first column is Select one choice ,select Items will come from BC table.So here i want to filter those LOV values according selection in Type SOC.Suppose Type SOC contain Type1,Type2 values,then when i am selectin Type1,Type1 related date willl diplay on table,now click on ADD button popup will open and in that Type SOC will Dispaly only Type1 related values not Type 2 type values.Type1,Type2 values come from same Table.
Here i am asking every one,please do help.

fyi
The HR schema I used to build the example application had some modifications in the context of https://tuhra2.samplecode.oracle.com/ .
So after running "demo/schema/mksample" as documented in "Resetting Sample Schemas" ...
at http://download.oracle.com/docs/cd/E11882_01/server.112/e10831/installation.htm#I6236
... I got "java.sql.SQLSyntaxErrorException: ORA-00904: "EMPLOYEES"."MODIFIED_DATE": invalid identifier ", using the example application in BindVarDefaultsInUIApp-v0.02.zip .
So, I have updated the example application to match the reset HR schema:
- see http://www.consideringred.com/files/oracle/2010/BindVarDefaultsInUIApp-v0.03.zip
- see screencast at http://screencast.com/t/gd6zKn63j
Because Re: af:table filter date format : task-flow navigation issue to get feedback, I created service request 3-2193340441 using My Oracle Support about (q1) and (q2).
regards
Jan

Change in qty of items under COGI

CAN ANYBODY TELL ME HOW TO CONTROL THE CHANGE IN QTY OF ITEM e.g. X MATERIAL IS IN COGI 100 NOS. SO THIS QTY SHOULD NOT BE CHANGED BY ANYONE.
THANKS AND REGARDS
R SEHGAL

Rakesh,
I think the name you have used is not starting with "Z" or "Y", that is the reason systems is saying that it can be created in SAP Package only...generally your technical team would have already created some "Z" package for their developments.
Please use the name of the transaction variant starting with "Z" and also assign to a relevant "Z*" package... work with your abap person in this regard. This will not affect anything as just creating a variant cannot be used till it is activated using the same transaction.
Hope this is useful....reward your points and close the thread,
Regards,
Prasobh

How to filter data

Dear Friends
How to filter data by entering data in the field then the data filtered according to the data that is enter the filed
For example
If I have a list of values in the field EMPNO , and If I enter ‘S’ at the field EMPNO before pressing F9
it should display those employees only when I press F9 as the following :
SMITH
SCOTT
And if enter ‘AL’ it should display those employees only when I press F9 as the following:
ALLEN
ALI
But if don’t enter any value in EMPNO and press F9 Then It should display all the All the employee’s name as the following
ENAME
SMITH
ALLEN
WARD
JONES
MARTIN
BLAKE
CLARK
SCOTT
KING
TURNER
ADAMS
JAMES
FORD
MILLER
ALI
ABDULLAH
Waiting for your valuable answer .
Best regards
Jamil Alshaibani

Dear Rosario
I have SET THE ITEM PROPERTY VALIDATE FROM LIST TO YES
Of the field EMPNO ON WHICH I HAVE ASSIGN THE LOVE.
And also I have written the script as the following:
SELECT ENAME,EMPNO FROM EMP
WHERE EMP.ENAME LIKE :EMPNO||'%'
Then I type ‘S’ in the field EMPNO and I press F9 it is not responding for displaying the list of values it is displayed this message in the status bar ‘FRM-40502: ORACLE ERROR :UNABLE TO READ LIST OF VALUES .
Waiting for valuable answer in details.
Best regards
Jamil Alshaibani

How do you remove a locked item in the trash bin

how do you remove a locked item in the trash bin

Hold down the option key while emtying the trash.
Please detail all you have done to resolve your issue. Need this information so that the users can avoid the "been there, done that" scenario type responses. This is to avoid repeating the troubleshooting you may have already tried. Thank you.

How to remove repeated mails in exchange online outlook web app

Hi,
Any help me , how to remove repeated mails in exchange online outlook web app . As we are in process of migrating mailboxes to office 365 . We have migrated 5 mailboxes . But when i checked outlook web app after migration completed , i could see repeated
mails . When i compared with on premise outlook and office 365 outlook web app , there was lot of differences in read and unread mails .
Customer is expecting , same read and unread count should be replicated to office 365 owa.
Please suggest me to prevent this problem . As this is very urgent to give solution to customer .
Big thanks in advance.
Vinoth .

If you've setup Outlook 2013 so it's connected to Office 365, and you've import the .pst file into Outlook, it will be showing as another "mailbox" within Outlook, but default called "Personal Folders" (unless you renamed it when it was created).
You should find that you can simply copy the mail items / folders from Personal Folders into their new home in the Office 365 mailbox. Once that's done Outlook will synchronise the items with o365 which may obviously take a while to complete, but once it's
finished those messages will be available online.

How to filter repeated qty of item

Similar Messages

Maybe you are looking for