LCM Business Rules Export using Utility.bat

Hi All,
Wondering if anyone has any tips on using Utility.bat to export business rules. I've defined a migration for business rules but it only exports one Business Rule to xml. When executing the same migration definition from Shared Services, the business rules get exported to XML fine.
We're running Planning 11.1.2.1.600.2.
Thanks,
Ryan

Hello Ryan,
Want to Export BR of ESSBASE (or) from Calc manager .
If Calc manager then first select all the Calc manager related artifacts through migration definition, after you get the export XML file ,Create a import migration XML file .
Now try to use Utility.cmd and place the files in Utility.cmd folder only and import all calc rules .

Similar Messages

Business rule to use page member on form

Hi all,
I need to create a business rule which uses a page member on the form. Created a RTP variable and used it in the Rule.Attached the rule and selected "use members on the form" and "Hide Prompt".But, Is still asking for prompt. How to unhide the prompt?

Is it a calc manage rule or an EAS business rule, which version of planning.
Cheers
John

LCM -hssurl parameter using Utility.bat / Utility.sh

Anybody knows why this parameter is not working?
LCM Documentation inidcates that -hssurl can be used to point to a specific HSS URL, in order to point to a diferent environment. Example
From DEV I can run the Utility passing the PROD URL to retrieve PROD data.
The following is noted in the O R A C L E ® H Y P E R I O N E N T E R P R I S E P E R F O R MA N C E MA N A G EME N T S Y S T EM RE L EAS E 1 1 . 1 . 1 . 3 L I F E C Y C L E MA N A G EME N T G U I D E [-hss url]: Uses the Shared Services URL
Shared Services no longer stores the Shared Services URL in the migration definition file. Instead, Hyperion Home is used to locate the Shared Services Registry and the registry is used to look up
Shared Services. This enables the utility to find Shared Services if the Shared Services location has changed or if a migration definition file is moved from one environment to another.
The [-hss url] argument was added for instances when the Shared Services URL should be used instead of Hyperion Home:Utility.bat c:/lcm/lcmdefinition.xml [-hss url]
If this parameter is not specified, Hyperion Home is used.
Note: Lifecycle Management Utility can still run migration definition files from earlier releases that have the Shared Services URL. However, when these definition files are loaded into the current release If the information above does not exist you I will need to review the errors in the LCM logs.

Hello Ryan,
Want to Export BR of ESSBASE (or) from Calc manager .
If Calc manager then first select all the Calc manager related artifacts through migration definition, after you get the export XML file ,Create a import migration XML file .
Now try to use Utility.cmd and place the files in Utility.cmd folder only and import all calc rules .

Problem using "Create Business Rule Design Definition" utility

Hi everyone,
I tried to create a business rule with Headstart Utilities - Create Business Rule Design Definition (Revision 6.0.0.20) and I got the following errors :
Errors
Message
Combination of Message Prefix and Message Number (SGM-ENG) does not match format AAA-NNNNN.
Activity aborted with ORACLE internal errors.
-1400 ORA-01400: cannot insert NULL into ("HST50"."QMS_MESSAGE_TEXT"."LANGUAGE")
I suppose that the utility concatenate the message prefix and the language to build the error message.
Our Oracle Designer version is 6.0.3.9.0, Headstart 2.1.2 with patch 12.4 and Developper is 6.0.5.35.3
Any patch available?
Regards,
Jerome Couture

Tim,
Headstart should be able to check out any tables you need.
We think we have the user settings
done correctly, but there may be something that we
have missed. How can we get Headstart to
automatically check-out the table(s) for which we
want to run the Business Rules design transformer?The user settings you need are (see also pages 5-7 and 5-10 in the Headstart User's Guide):
- Under 'Process the following objects', choose 'Checked out by anyone'
- Also check the check box '... also Checked In objects'
- Choose whether you want to automatically check out with or without lock
If this does not help, please run the utility with log level 'Debug Detailed' (can also be set in the User Preferences) and report the last few lines of the log messages. They should give an indication of why the check out does not succeed.
Hope this helps,
Sandra Muller

Business rule export issue

Hi all,
I created a business rule in calculation manager. Now I want to have this one in my EAS console.
I try to export my business rule from calculation manager, but when I click export some window appears and immediately disappears. So I can't do export.
What it could be? Is there any else way to export business rule to EAS Console?
Thanks in advance

Hi,
I did'nt faced any issues wile exporting using the LCM. This is actualy the best methods of exporting and importing the BRs form different environments.
You can also try exporting na dimporting the BRs from EAS console.
I dont you how you are doing it, it is hjust about selecting the artifacts take an export and import from the file system.
It is ok to copy paste if you have a few rules to export, but if you have many, then try to use one of the approach that the product provides.
Thanks,
Sourabh

Headstart Business Rule Design Xformer utility

When using the Headstart Business Rule Design Transformer to generate Business Rules, the table is required to be checked out. In previous releases, we have been told that an automatic check-out is performed on the table(s), but ours forces us to manually check-out the table definition, or it does not continue. We think we have the user settings done correctly, but there may be something that we have missed. How can we get Headstart to automatically check-out the table(s) for which we want to run the Business Rules design transformer? Or is this a bug in the current release? We are using Headstart release v6.5.2.3 (HSU_BRTR). Thanks.

Tim,
Headstart should be able to check out any tables you need.
We think we have the user settings
done correctly, but there may be something that we
have missed. How can we get Headstart to
automatically check-out the table(s) for which we
want to run the Business Rules design transformer?The user settings you need are (see also pages 5-7 and 5-10 in the Headstart User's Guide):
- Under 'Process the following objects', choose 'Checked out by anyone'
- Also check the check box '... also Checked In objects'
- Choose whether you want to automatically check out with or without lock
If this does not help, please run the utility with log level 'Debug Detailed' (can also be set in the User Preferences) and report the last few lines of the log messages. They should give an indication of why the check out does not succeed.
Hope this helps,
Sandra Muller

CEV business rule only uses first set of parameters in multiple inserts

We have a cev rule that logs data for emails when a record is inserted in a table.
Where there are two records inserted from a script, even where a qms_transaction_mgt.open_transaction and close transaction are used around each insert, the CEV record parameters do not change.
By this I mean we have two records:
1 - id: 22
2 - id: 23
We pass the id to the CEV business rule and dbms_output the parameter value - it indicates that for both records the p_id = 22.
The insert into the table indicates that the record ids were 22 and 23.
This appears to have been reported several times but there is no solution.

I would set it lower than 20 minutes as that is quite high before it sends the rules into the background, if the spawning at 10 minutes try setting it just lower than 10 as a test.
It may also be worth looking into the apache timeout (if you are using the apache web server plugin) as that could also be playing a part.
Cheers
John
http://john-goodwin.blogspot.com/

Track changes in business rule made using SOA composer

Hi,
I have business rules deployed on a server. Authorized user can change condition or any other thing in a business rule using soa composer. How can i track changes made in this business rule?
i.e. I want to view the change and if possible who changes it.
I am using SOA 11g
Any help is appreciated
Thanks

Below document describes how to Monitor Decision Service Components and Engines.
http://docs.oracle.com/cd/E29597_01/admin.1111/e10226/rules_mon.htm#CJAJJIJB

Business Rule Export Not Complete

I have a situation where I am exporting business rules and the codeblock of a few business rules are not included. If I look at the XML, the business rule is there, the name,description, ect, but the node that should have the actual code is either empty or not there. Has anybody experienced this before? We have cycled the services to clean the cache. There aren't any special characters that I would expect to break the xml. We don't get any errors during the export. Anybody ever had this issue?

Try the following
Option 1
EAS console provide the functionality to migrate (rather than export to file) a repository from a source environment to a target environment by direct RDBMS connection.
Refer to page 97 of the HBR administrator guide:
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/hbradmin.pdf
Option 2
Increase the heap size of the EAS console via the "admincon.lax" file found under Hyperion\AnalyticAdministrationServices\console\bin
The parameter to change is: "-Xmx256M" in the "LAX.NL.JAVA.LAUNCHER.MAIN.METHOD" section of the file.
You can increase it to a maximum of "-Xmx1024M"
Hope this helps.
Cheers
-Manoj

Import/Export uses odiparam.bat for work/master Repository

When I do a import/export, the command appears to use the odiparam.bat file to pickup the work/master repository connections. This makes sense for the export, but the import has an optional parameter for the work repository. From what I can tell, this parameter is ignored (or am I doing something wrong). Regardless, of whether or not it is used, how would ODI know the connection (user/password) information if it was used. This would seem to indicate that the user WAS picked up from the odiparam.bat file.
Am I thinking about this correctly or have I missed something?
T

How are you trying to do the import/export?
If you are importing the obejcts in designer - it will use the credentials you specified when you connected.
Craig

How to implement business rules by using drolls in OSB

Hi
I am new to Drools,can any body tell how to implement drools concept in OSB11,provide any useful links or blogs.
Thanks in Advance
Mani

Mani,
I have implemented Drools by exposing them over web service call through Business Service of OSB.
As you are using Java Callout, try to set proper return type for the java method called, better to use XMLObjects as the return type.
http://www.xenta.nl/blog/2011/08/29/oracle-service-bus-java-callouts-with-xmlobjects/
http://mazanatti.info/index.php?/archives/63-Oracle-Service-Bus-generating-XML-Objects-from-Java-Callouts.html
http://blog.xebia.com/2009/10/11/java-callout-on-the-alsb/
http://itnewscast.com/middleware/oracle-service-bus-java-callouts-xmlobjects
How to retrieve the java object in a proxy service in osb -- Plz help
Hope it helps !!
Abhinav
Edited by: Abhinav on Dec 12, 2012 4:21 PM

Exporting business rules

I'm using the instructions from the following thread, Re: Steps to migrate Hyperion Planning application from 9.2.0 to new 9.3.1 env to copy a Planning application from version 9.2.0.2 to 9.3.1. There is a reference in these instructions to export the business rules using Administration Services. I only see options for Business Rules to either copy or export to shared services in the 9.2.0.2 version of the AAS Console. Which one of these options should I use or is there someplace else I should look to export the business rules.
Thanks,
Tom

Yes, the user Id. is an admin for business rules. It may be a configuration issue. I get the following message when I try to click on a rule under Business Rules in Shared Services.
Refer to your Admin Guide to configure security privileges for this application.
I get this message in both the 9.2.0.2 environment and 9.3.1 environment. The user is an admin for Business Rules in the 9.3.1 environment also.
The application does not use forms which I beleive is what Business Rules are used for. Not sure if they are used for anything else. Is it safe that I can ignore the business rules in the 9.3.1 environment or am I missing a critical piece that needs to be included in the 9.3.1 environment.
Thanks,
Tom

Business Rule Design Transformer fails with ORA-00001

I'm stuck with the Business Rule Design Transformer Utility of Headstart. After running this utility over one BR it is impossible to run it over other BR's because of violation of the unique constraint HST65.QMS_MSP_PK (table QMS_MESSAGE_PROPERTIES). The problem is that the utility tries to insert a record (message, specified in the Notes property of Designer) into QMS_MESSAGE_PROPERTIES with the code "ABI-10000", that was already created by running the utility for the first time.
Exact error message: "Activity aborted with ORACLE internal errors.
-1 ORA-00001: unique constraint (HST65.QMS_MSP_PK) violated"
I'm using Designer 6i (6.5.52.1.0) and Headstart 6.5.1.3
If someone has any clue about this I would be very grateful
Cheers,
Dimce

Jan,
The name of the business rule is already in the CONSTRAINT_NAME of the QMS_MESSAGE_PROPERTIES table.
I already tested by deleting the records in the two tables, QMS_MESSAGE_PROPERTIES and QMS_MESSAGE_TEXT, and ran the utility, but it didn't help either. I can run the utility for one rule, but when I want to run it again at some later point, it fails with this error.
But, I managed to create rule definitions using the HSU Create Business Rule Design Definition, rule by rule. I only had to add references in the business rule to the used module.
Dimce

Business Rules 3.5

Hi,
Our Company still using Hyperion Business Rules 3.5 and for an acquisition process they need to separate the Essbase and HBR instances in separate servers. That is already done. The process to export and import all the Business Rules was using the export/import application feature. All the rules were exported as a .GAL file and then imported to the new system.
The situation is that some rules run perfectly, doing all the distributions but others apparently run successfully but they don't do all the distributions, they don't process the formulas at all and no errors showed up. When we do a retrieve after those rules with problem run the data still unchanged.
Another note. The same rules that still in the original server run fine.
I'll appreciate all the hints and information you can bring me to go to the bottom of this situation.
Thanks.
Edited by: user3568404 on May 16, 2011 6:35 AM

You have appeared the rights! All trouble was in RTP settings. Its menu is allocated very inconveniently. I haven't found it at once))

BPC 10.0 NW - How do I make Business Rules run one Period at a time

I was wondering if anyone has a way to make business rules run one period at a time before moving on to the next to the next time period (i.e. January 2014 calc prior to moving on to February 2014). In past SQL this could be achieved with a piece of script *CALC_EACH_PERIOD. Is there anything like this that can be applied in the NW platform for Business Rules? I have some logic that I want to run through a package on multiple periods at once. Part of this logic contains a Business Rule that uses a value from the preceding period. the Business rule appears to be calculating all time periods selected in the package at once so it is missing the piece that is supposed to come from the prior month unless the package is run one period at a time. I need the logic to run sequentially by time period (oldest first) when more than one time period is selected.
thanks,
Keith

Hi Vadim,
Script for the business rule is below, it runs along with the FX_Trans rule in the same package ( I have also attached a screen shot of the actual Business rule its self)
*RUN_PROGRAM CALC_ACCOUNT CATEGORY = %CATEGORY_SET% ENTITY = %ENTITY_SET% CURRENCY = USD //GROUPS = %GROUPS_SET% TID_RA = %TIME_SET% //OTHER = [AUDITTRAIL=%AUDITTRAIL_SET%] CALC = CALC_HIST_USD *ENDRUN_PROGRAM
Thanks, Keith Carlson

LCM Business Rules Export using Utility.bat

Similar Messages

Maybe you are looking for