How to find a program last used by

Hi
I need to find out when and  who last used the program(executed) the program.
tahnk u.

Hi Vipin,
I think this is not possible.
If you are looking for a user who runs the program very recently, check ST03n.
But If you are interested to get these informations, in a clear way, you can set-up your own logic ( including a small routine in all your abaps, which will be able to update a Ztable, table which will store : last user, last date, running time...etc ).
Hope this helps,
Erwan

Similar Messages

  • How to find out Query last used by whom

    Dear All,
    Can any one tell me that "How to find out the Query last used by whom. I have already searched in SDN but no luck. In my system BW Stats are not installed and I have already checked the below tables.
    RSZELTDIR  - Directory of the reporting component elements
    RSZELTTXT  - Texts of reporting component elements 
    RSZELTXREF  - Directory of query element references 
    RSRREPDIR -  Directory of all reports (Query GENUNIID) 
    RSZCOMPDIR -  Directory of reporting components 
    RSZRANGE  - Selection specification for an element 
    RSZSELECT -  Selection properties of an element
    RSZELTDIR - Directory of the reporting component elements 
    RSZCOMPIC -  Assignment reuseable component <-> InfoCube
    RSZELTPRIO -  Priorities with element collisions
    RSZELTPROP - Element properties (settings)
    RSZELTATTR - Attribute selection per dimension element 
    RSZCALC - Definition of a formula element 
    RSZCEL - Query Designer: Directory of Cells
    RSZGLOBV -  Global Variables in Reporting
    RSZCHANGES  Change history of reporting components 
    I am able to find out the Date and time but not the user name.  So could you please help on this.
    Regards
    Sankar

    i think u have missed it.
    RSZCOMPDIR IS THE ONLY TABLE WHICH PROVIDES THE DATA.
    ENTER TECHNICAL QUERY Name in RSZCOMPDIR-COMPID.
    RSZCOMPDIR-TSTNAM gives you the user id of sap bw user who made the change.
    RSZCOMPDIR-TSTPDAT gives you date on which  change was made .
    RSZCOMPDIR-TSTPTIM   gives you timestamp on which  change was made .
    all users details can be obtained from TCODE SU01 where you need to enter sap user id.
    You can also get user name( description) by using tcode SE09 and entering above sap user id.

  • How to find out the last date & time on which a program has been run

    Hi Experts,
    Can anybody tell how to find out the last date on which a purticular program has been run.
    Valuable answers will be rewarded.
    Thanks & Regards,
    Satish.

    Hi!
    Try STAD transaction. Unfortunately it contains a huge amount of data, so it is available only for a few days backwards... Maybe some weeks, but you can't make yearly reports from its data... So it's not useful to see, which program is in use or not...
    I planned once to download it weekly, but it was not so important...
    Regards
    Tamá

  • How to find out the Transactions used per month & the USER who used that

    Hi,
    1)How to find out the Transactions used per month & the USER who used that?
    2)and can i get the above same for minimum 20 month?
    System : SAP- Enterprise Core Component.

    You can use my program...
    *& Report  Z_ABAP_TCODE_MONITOR
    *****&  Program Type          : Report                                 *
    *****&  Title                 : Z_ABAP_TCODE_MONITOR                   *
    *****&  Transaction code      : ZTCODE_USAGE                           *
    *****&  Developer name        : Shailendra Kolakaluri                  *
    *****&  Deveopment start date : 26 th Dec 2011                         *
    *****&  Development Package   : ZDEV                                   *
    *****&  Transport No          : DEVK906086                                       *
    *****&  Program Description   : This program is to display
    *List all tcodes executed during previous day.
    *& Show the number of users executing tcodes
    *& Modification history
    REPORT  Z_ABAP_TCODE_MONITOR.
    *& List all tcodes executed during previous day.
    *& Show the number of users executing tcodes
    TYPE-POOLS : slis.
    DATA: ind TYPE i,
          fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
          layout TYPE slis_layout_alv,
          variant TYPE disvariant,
          events  TYPE slis_t_event WITH HEADER LINE,
          heading TYPE slis_t_listheader WITH HEADER LINE.
    *REPORT  z_report_usage.
    TYPES: BEGIN OF zusertcode,
      date   TYPE swncdatum,
      user   TYPE swncuname,
      mandt     TYPE swncmandt,
      tcode     TYPE swnctcode,
      report TYPE swncreportname,
      count     TYPE swncshcnt,
    END OF zusertcode.
    *data   : date type n.
    DATA: t_usertcode  TYPE swnc_t_aggusertcode,
          wa_usertcode TYPE swncaggusertcode,
          wa           TYPE zusertcode,
          t_ut         TYPE STANDARD TABLE OF zusertcode,
          wa_result    TYPE zusertcode,
          t_result     TYPE STANDARD TABLE OF zusertcode.
    PARAMETER: month TYPE dats DEFAULT sy-datum.
    *PARAMETER: date TYPE dats.
    *select-options : username for wa_usertcode-account.
    START-OF-SELECTION.
    PERFORM get_data.
    PERFORM get_fieldcatalog.
      PERFORM set_layout.
    PERFORM get_event.
    PERFORM get_comment.
      PERFORM display_data.
    FORM get_data .
    *date = sy-datum - 2 .
    After start-of-selection add this line (parameter Month required 01 as day).
      concatenate month+0(6) '01' into month.
      CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
        EXPORTING
          component     = 'TOTAL'
          ASSIGNDSYS    = 'DEV'
          periodtype    = 'M'
          periodstrt    = month
        TABLES
          usertcode     = t_usertcode
        EXCEPTIONS
          no_data_found = 1
          OTHERS        = 2.
      wa-date  = month.
    *wa-date  = date.
      wa-mandt = sy-mandt.
    wa_usertcode-account = username.
      LOOP AT t_usertcode INTO wa_usertcode.
        wa-user = wa_usertcode-account.
        IF wa_usertcode-entry_id+72 = 'T'.
          wa-tcode  = wa_usertcode-entry_id.
          wa-report = space.
        ELSE.
          wa-tcode  = space.
          wa-report = wa_usertcode-entry_id.
        ENDIF.
        COLLECT wa INTO t_ut.
      ENDLOOP.
      SORT t_ut BY report ASCENDING.
      CLEAR: wa, wa_result.
    endform.
    FORM get_fieldcatalog .
    fcat-tabname     = 't_ut'.
    fcat-fieldname   = 'DATE'.
    fcat-seltext_l   = 'Date'.
    fcat-key         = 'X'.
    APPEND fcat.
      CLEAR fcat.
      fcat-tabname     = 't_ut'.
      fcat-fieldname   = 'MANDT'.
      fcat-seltext_l   = 'Client'.
      fcat-key         = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-tabname     = 't_ut'.
      fcat-fieldname   = 'USER'.
      fcat-seltext_l   = 'User Name'.
      fcat-key         = 'X'.
      APPEND fcat.
      CLEAR fcat.
      fcat-tabname     = 't_ut'.
      fcat-fieldname   = 'TCODE'.
      fcat-seltext_l   = 'Transaction Code'.
      fcat-key         = 'X'.
      APPEND fcat.
    ENDFORM.
    *&      Form  SET_LAYOUT
          text
    -->  p1        text
    <--  p2        text
    FORM set_layout .
      layout-colwidth_optimize = 'X'.
    ENDFORM.                    " SET_LAYOUT
    *&      Form  GET_EVENT
          text
    -->  p1        text
    <--  p2        text
    *FORM get_event .
    events-name = slis_ev_top_of_page.
    events-form = 'TOP_OF_PAGE'.
    APPEND events.
    *ENDFORM.                    " GET_EVENT
    **&      Form  GET_COMMENT
          text
    -->  p1        text
    <--  p2        text
    *FORM get_comment .
    DATA: text(30).
    text = 'Billing Report'.
    heading-typ = 'H'.
    heading-info = text.
    APPEND heading.
    *ENDFORM.                    " GET_COMMENT
    **&      Form  top_of_page
          text
    -->  p1        text
    <--  p2        text
    *FORM top_of_page .
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
       EXPORTING
         it_list_commentary       = heading[]
      I_LOGO                   =
      I_END_OF_LIST_GRID       =
    *ENDFORM.                    " top_of_page
    *&      Form  DISPLAY_DATA
          text
    -->  p1        text
    <--  p2        text
    FORM display_data .
      sort t_ut[].
    DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program = sy-cprog
          is_layout          = layout
          it_fieldcat        = fcat[]
          i_save             = 'A'
          is_variant         = variant
          it_events          = events[]
        TABLES
          t_outtab           = t_ut
        EXCEPTIONS
          program_error      = 1
          OTHERS             = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " DISPLAY_DATA

  • How to find standard Programs for perticular prog.

    Hi Abapers,
    How to find standard program is avalible or not in SAP to up load data for vendor master updataion ... through BDC or LSMW or BAPI ? .
    If standard program is avalible in SAP . we can use it to upload ?.

    hi  madhu
    yes we can upload the data , we can use the Direct input methods to upload the vendor master using LSMW tool . As goutham suggested use RFBIKR00 to upload the vendor master.
    ~linganna

  • How to Find Which Programs running in my Domain Computers

    How to Find Which Programs running in my Domain Computers.

    In addition, there are other third tools you can use. Here is a script from the TechNet Scripting Gallery:
    List All Installed Software
    Returns a list of all software installed on a computer, whether or not by Windows Installer. This script reads installed applications from the registry. (See Richard Mueller's comment on how to output it to a CSV file)
    http://gallery.technet.microsoft.com/scriptcenter/8035d5a9-dc92-436d-a60c-67d381da15a3/view/Discussions
    Of course that's just running it against one computer. There's also a script in the above link (scroll to the bottom) that will find installed software of a list of computers in a network and also detect the defined forbidden installed software, and
    another script that will uninstall that software remotely.
    Overall however, if you want to do this network wide with much a much easier method (although more complex to setup), I agree with using SCCM or Spiceworks. There is also Altiris, and a number of other third party solutions that you can use.
    Maybe if you can provide more specific information on the end result of the solution you are looking for, we can provide more specifics to help you.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • HOw to find Report program associated module pool program?

    HOw to find Report program associated module pool program?
    I.e
    Me21n is the tcode.I want to find screens related to this tcode.
    Associated report program is RM_MEPO_GUI.(It has no screens hence it is a report program).
    (if module program is attached to tcode,i can easily find entries in d020s)
    Here  report program is calling a module pool program SAPLMEGUI(Has screens).
    If i give the Tcode Me21n,i want to list out all the screens of it..
    Can u give any suggestion....

    Hi Sampath.
    Manually i can see it (by seeing in system-status)..
    programmatically i want to know..
    for ex:if u take  Tcode:Va01
    we can get program (dialog)  and tcode in Tstc table .
    If we know the program name(dialog), we can find program and screens in d020s table.
    Va01 is atatched to a module pool program..No problem to find screens..
    In case of me21n,
    It is atatched to report program(calling module pool program)..
    Here i could not be able to get the screens ..
    I think u undrstood my problem..

  • How to find out query name using Elements of the query builder.

    Hi SDNers,
    how to find out query name using Elements of the query .
    thanks,
    satyaa

    Hi,
    For having a look at the relation between BEx tables,check the link below:
    http://wiki.sdn.sap.com/wiki/display/BI/ExploretherelationbetweenBEx+Tables
    -Vikram

  • How to find the File name using the FTP Adapter

    hi all,
    how to find the File name using the FTP Adapter with BPEL.
    Regards

    Found the solution for this.
    First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
    In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
    Thanks for the posts

  • How to find the program name of the smart form?

    How to find the program name of the smart form if output type is not known?
    thanks in advance...

    How to find the program name of the smart form if output type is not known?
    thanks in advance...
    T-code SE16
    Enter table name: TNAPR  -> Press enter key
    Enter smartform name in input field(SFORM):  Z_your_smartform_name
    Execute
    you can find  program name under the column PGNAM/Program name.
    Regards
    sudheer

  • How to find the program name of the created sap query ?

    how to find the program name of the created sap query ?

    Hi avinash,
    Try in this way..
    Go to SE16 and then go to table TSTC.
    in that give program name as <b>*followed by your query name</b>
    (for example *TESTQUERY)
    and run , that will give progname======queryname.
    this way you can find program name.
    vijay

  • How To find Purchase requisition last changed By and last changed On?

    Hi All,
    How To find Purchase requisition last changed By and last changed On?
    Thanks,
    Ezhil

    Hi
    Go to M53N
    Environment.
    Header/Item changes.
    You will get the changes made to PR.
    Regards
    Sachin

  • How to find the query name using infoset name

    Hi Experts
           Iam new to the sap queries(SQ01,SQ02), some queries already created.
          now i want to do some modification, my problem is i am not able to find the query name.
          I know the infoset name, can you tell me how to find the query name using the infoset name, is ther any table for this.
    i tried in sq01 also, but its confusion, pls advice me on this.
    thanks in advance.
    regards
    rajaram

    Hi
    try like this..
    SQ02 --> go to --> Query Directory..
    from there you can get all the queries belong to a Infoset.

  • How to find which datasource are using  tables AFRU ,CAUFV and AUFM

    *how to find which datasource are using  tables AFRU ,CAUFV and AUFM*

    Hi,
    You can enter your table names in SE11 transaction and click "Display" and again click "Where -Used-List". Then it will show all the places where these tables are used(Datasources)
    Hope this helps.....
    Regards,
    SUman

  • How to find reports which are using sales tables

    Hi Guys,
    we are using OBIEE 10g version.Here i need to identify the the reports which are using sales tables.
    Table names are given but how to find which report is using these tables.Is there any method to find
    or we have to check all reports manually?
    Could any one pls suggest me here!
    Regards,
    sk
    Edited by: 912736 on Jun 8, 2012 1:24 PM

    Hi SK,
    You can run a report from catalog manager that willl give you all answers requests and the subject area columns in use, you can map these back to the sales tables either manually or by linking (vlookup) to an RPD report that you can run from the Admin tool.
    The Usage Tracking method is pretty good but you will have to match up the reports using the Logical SQL.
    I'd do both methods and cross ref your results to ensure nothing slips the net.
    Regards
    Alastair

Maybe you are looking for