How to find aged out sql_id of shared pool / after flushed shared pool in oracle 10g/11g

i have one sql_id that was not in v$sql / v$sqltext
when i flushed the shared pool now where can i find old sql_id

Shared Pool is part of the SGA in Main Memory. So once you flush it the information is gone. You cant get it back.

Similar Messages

How to find the count of tables going for fts(full table scan in oracle 10g

HI
how to find the count of tables going for fts(full table scan) in oracle 10g
regards

Hi,
Why do you want to 'find' those tables?
Do you want to 'avoid FTS' on those tables?
You provide little information here. (Perhaps you just migrated from 9i and having problems with certain queries now?)
FTS is sometimes the fastest way to retrieve data, and sometimes an index scan is.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:9422487749968
There's no 'FTS view' available, if you want to know what happens on your DB you need, like Anand already said, to trace sessions that 'worry you'.

How to find the current line in the table control in module pool ?

How to find the current line in the table control in module pool ?
This is an urgent requirement? please do help me.

refer to this example
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA: cols LIKE LINE OF flights-cols,
lines TYPE i.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
      TABLES demo_conn.
SELECT * FROM spfli INTO CORRESPONDING FIELDS OF TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
DESCRIBE TABLE itab LINES lines.
flights-lines = lines.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX<b> flights-current_line.</b>
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
      ENDIF.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols
                              WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
ENDLOOP.
      ENDIF.
ENDCASE.
ENDMODULE.

Oracle 10g/11g database use on UEK versus Red Hat kernel? How widely used?

Greetings
is there any official or semi-official information regarding how widely used is Oracle UEK to run Oracle 10g/11g database (RAC or single-node) versus running Oracle database on Red Hat Linux or on Oracle Linux with Red Hat kernel ?
I am asking because at my customer site there is a perception that Red Hat (or Oracle Linux with Red Hat kernel) is much more widely used in production to run Oracle 10g/11g database and therefore it will provide better stability even if the performance may be somewhat reduced compared to Oracle UEK option.
So I need some sort of approximate percentage numbers of how well is UEK used in Linux Oracle community to run Oracle 10g/11g databases.
Many thanks.
Yuri B

The problem with the world is that the intelligent people are full of doubts, while the stupid ones are full of confidence. Well, in my opinion, a higher market share does not reflect the quality or reliability of a product. Take MS Windows for example. Unfortunately, the reason for success is often not due to knowledge and experience, but rather due to fear and sheep effect or herd behavior.
Perhaps you can use other arguments or questions to help you to make a decision, eg.:
Oracle has a better understanding of what Oracle products require than Red Hat.
Oracle takes full responsibility for the OS and Database, no finger pointing.
Oracle tries to provide a better product than the RHEL kernel.
The Oracle UEK kernel contains Oracle driver software, not available for RHEL 6 or later.
Oracle updates are free of charge, RHEL requires a subscription.
Oracle as a company is about 20 times bigger than Red Hat.
There can be reasons that require the use of the original RHEL kernel, for instance if the vendor of a specific driver for your hardware demands it. But otherwise...

How to find old hostname remained in new system after system copy

Hello all,
Let me ask you about changing hostname during system copy.
I've finished homogeneous system copy. I changed its hostname and did not change its SID.
I know we should check and modify RFC destination(SM59), logon group(SMLG), SAPconnect(SCOT), operation mode(SM04) and instance profiles after system copy with changing hostname.
But my customer also used hostname for variant. I overlooked.
Then they require me to provide how to find old hostname in whole system ...
Do you have any good tools or idea? Any advice would be appreciated.
Best regards,
Ikue

Hi,
If u have not deleted the inactive profiles in the tcode RZ10, you can find the old hostname in the instance profile.
Also if u have not deleted the entries in the tables TPFET and TPFHT, u can find the old hostname here in these tables also.
Regards,
Varadharajan M

How to embed/show an image file (.jpeg or .jpg or .png) into a Oracle 10g report file (.rdf)

Hi All,
Morning , have an urgent requirement and need some guidance regards this.
we are currently having an existing Oracle 10g reports file (.rdf) lets say with name : Testing1.rdf .
The report output is getting generated in a pdf format . it opens up in a pdf format..
Now we want to embed an image file lets say : (logo.jpeg or logo.gif ) into the report output..at run time the image from the image file should show up in the report output.
Could someone please help as to how this could be achieved..and what approach we could follow for this...
with regards
Thanks as always !!

Hi All,
Morning ...just a follow up question to this original post : embedding the image files at runtime into an Oracle Report..
We were able to achieve this by entering the folder location where the image files are place on the server in the REPORTS_PATH env variable in the report.sh file.
Then we update this filename like file1.jpg into a table and from there we fetch this in the Oracle Reports data model directly.
for The layout field we select the option as Image.
All this works fine..
Issue : The resolution of the embedded image in the generated report output is very low ...means the image appears there but it is not very clearly visible ..is there any way we could improve the IMAGE RESOLUTION in the report output....?????
With regards

How to find age related edu apps?

Having had the iPod1 since it came out, I have to admit I love it. So does my kids, especially after installing new apps for them. However, I find it very difficult to find apps for their specific age. I would like to be able to find ie;
App - Educational - KG1 - numbers, letters, etc...
App - Educational - GR2 - math, word challenge, etc...
These apps are around (seen some in TV ads) but why so difficult to find?
So, the specific question would be;
- How can I find apps related to a kids age and/or Grade???

Unforunately, there's no direct way to filter that specifically in the App Store. However, there are some websites devoted to the ipad and education, which could get you started. Some I've found are:
http://www.bestkidsapps.com/
http://www.kansascity.com/2011/03/14/2724128/some-great-ipad-apps-for-kids.html
http://ipadforkids.com/
http://www.iphoneandkids.com/

I am trying set my email (my old uni one) as the default email on my iPad. It's a microsoft exchange one. How can I do this it asks me what the server is and I have no idea how to find this out? And even if I do will that work?

An answer to a similar question on this said they (they not specified as to who) needed to enable two things POS or something and I have no idea what that means. Is it even possible to make it my default mail if it's Microsoft exchange?

If you're simply referring to adding a mail account that uses an IMAP server, the short answer is yes, it will work. What did you mean by default email? You can setup multiple mail accounts so you shouldn't have to worry about a default mail account. To setup additional accounts (or delete for that matter), you can go to Settings>Mail, Contacts, Calendar>Select the Account (Delete) or Add Account.
What is your mail provider? Often you can contact your IT department, or if it's a common mail server, googling will find the server relatively easily (ie: gmail: 'Google' 'imap server for gmail'). If, by default mail, you mean your Apple ID, yes you can also create an Apple ID that uses an IMAP associated email address. Your Apple ID can pretty much be any email address as long as you have access to it to confirm the account's creation.

My iPhone bearing no.9439047600 is stolen. How to find it out?

My iPhone with no 91-9439047600 was lost/stolen at Ghatagaon in Keonjer district.
Can I really get it back by tracking IMEI no?

You can't get it back or track it by IMEI number.
If you had "Find My iPhone" enabled in Settings > iCloud then you may be able to locate it. If not, you cannot locate it. If it was enabled then you can try locating it via http://icloud.com on a computer or the App "Find My iPhone" on another iDevice. Note: this will only work if your device is connected to a network and the device hasn't already been restored as new and/or "Find My iPhone" has not been disabled on it. Note: Disabling "Find My iPad" is much more difficult in iOS 7.
If you think that your device was stolen rather than lost then you should report it to the police. In either case you should contact your carrier, change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.
See also here for additional information: http://support.apple.com/kb/HT5668

How to find the folder (EBS_R12) in OEL 5 after copy/paste from Windows 7 ?

Folks,
Hello. I have just installed Oracle Linux 5 as Guest OS on the top of VMPlayer. Host OS is Windows 7.
I downloaded Oracle E-Business Suite R12 from edelivery into Windows 7 in a folder(EBS_R12) on my LapTop screen.
In order to install EBS R12 into Oracle Linux 5, I copy/paste the folder EBS_R12 into Oracle Linux 5 screen. The file size is about 50GB. After coply/paste is completed successfully, I cannot find where is the folder (EBS_R12) in the Guest OS Oracle Linux 5.
Can any folks tell me where is the folder (EBS_R12) in Oracle Linux 5 after copy/paste from Windows 7 ?

Hi,
After coply/paste is completed successfully, I cannot find where is the folder (EBS_R12) in the Guest OS Oracle Linux 5.Was the copy/paste successful.
If yes then you can do the following
#find / -name EBS_R12 -type d -print
(Assuming you copied the folder "EBS_R12" , But not its contents).
Thanks

How to pass the out put of ListFiles as input to SynchronousRead FileAdaptor in Oracle SOA

Hi All,
I have list of XML Files in one folder, i want to read all the files one by one ,
i can use the ListFiles to get all the files, i want pass each files at a time as input to SynchronousRead.
i know how to pass the file names dynamically to SynchronousRead File Adaptor, but i dont know how to handle the file list, and passing one at a time from the list
Any help please,

Thanks for your reply PuneetRekhade,
i could not see ant for each activity in the Bepel activities,but in transformation i could make use of for-each do display the all the filenames,
i have used while , with following condition number(bpws:getVariableData('Invoke1_FileListing_OutputVariable','filelist','/ns1:filelist/@size'))>=number(bpws:getVariableData('count_Files')),
and in side the while loop , created assign activity which gives assign one file name at a time by acessing the list index.
bpws:getVariableData('Invoke1_FileListing_OutputVariable','filelist',"/ns1:filelist/ns1:file[bpws:getVariableData('count_Files')]/ns1:filename")
i have incremented count variable at the end of the loop.

Dear All... I need HELP..., Dear all... How to find or get back my last backup after "overwritten" history backup???Please Help Me

I'm backup my iphone on computer A, than i sync/ restore my backup from Computer B to my iphone...
After i take any data from my iphone, i'm plan to restore my backup from computer A.. but after i connect it to my itunes ,automaticlly sync to my iphone...
so my last backup on Computer A "overwritten"... Because on old itunes version , we can choose what time to restore backup. in the last itunes version i can't
please to all... i need help... i have important contact on my last backup from computer A and now it's gone...
And i Forget to activate my icloud...
so where i can find or see my last sync history device on my computer??
Thank You

There really is no need to use caps and bolding. It only serves to make your message annoying.
Change your iTunes (Apple ID) password along with any other password that was stored in the iPod. If any passwords are associated with credit cards, contact the CC company and get your card replaced (with a new number). If any passwords are associated with your bank or any savings institution, contact them also and discuss approprate action with them.
The "Find my..." function is pretty much useless if the device is in the hands of a thief. All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
The only real protection you have is with the personal information on the device rather than the physical device itself. Something as small as an iPod should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

How to find messages and some of phone numbers after updated iphone4?

I updated my mom's iPhone 4. Before updated, I copied the whole content of her iPhone to the PC. But after updated, I cannot find any messages and some of the phone numbers. Can someone help me with this problem?

Hi,
Depending if you are using Buddy Lists or not then this setting is supposed to be fro the Budfdy lists but will effect the Main Window display
This item lower in the same View Menu is supposed to be the one fro the main Messages window (it has to be the "Front" window)
As you can see it also controls what Messages style is used.
7:54 pm Tuesday; June 24, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Dispatcher stopped due to shared memory realm does not exist in Oracle 10g

Hi Gurus,
Suddenly my Message server stopped, i have checked R3trans -d its givign following message
D:\>R3trans -d
This is R3trans version 6.14 (release 700 - 12.12.08 - 14:04:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'CHE'"
R3trans finished (0012).
So i have restarted the server, now message server started then Dispatcher has been stopped again error is same here i am pasting trans.log file
4 ETW000 http://dboci.c ,00000 *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
4 ETW000 44375 1.224660
4 ETW000 dev trc ,00000 server_detach(con_hdl=0,stale=1,svrhp=02F07EDC) 23 1.224683
4 ETW000 dev trc ,00000 Detaching from DB Server (con_hdl=0,svchp=02EF47E8,srvhp=02F07EDC)
4 ETW000 32 1.224715
4 ETW000 dev trc ,00000 Deallocating server context handle 02F07EDC 688 1.225403
4 ETW000 http://dbsloci. ,00000 *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 49 1.225452
4 ETW000 dev trc ,00000 set_ocica() -> OCI or SQL return code 1034 25 1.225477
4 ETW000 dev trc ,00000 Try to connect with default password 74 1.225551
4 ETW000 dev trc ,00000 Connecting as SAPSR3/<pwd>@CHE on connection 0 (nls_hdl 0) ... (dbsl 700 030508)
4 ETW000 62 1.225613
4 ETW000 dev trc ,00000 Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 37 1.225650
4 ETW000 dev trc ,00000 0 UTF8 1 02EEF9E0 02EF5014 02EF489C
4 ETW000 38 1.225688
4 ETW000 dev trc ,00000 Allocating server context handle 19 1.225707
4 ETW000 dev trc ,00000 Attaching to DB Server CHE (con_hdl=0,svchp=02EF47E8,srvhp=02F07EDC)
4 ETW000 43 1.225750
4 ETW000 dev trc ,00000 Assigning server context 02F07EDC to service context 02EF47E8
4 ETW000 14810 1.240560
4 ETW000 dev trc ,00000 Assigning username to user session 02F1BC88 28 1.240588
4 ETW000 dev trc ,00000 Assigning password to user session 02F1BC88 29 1.240617
4 ETW000 dev trc ,00000 Starting user session (con_hdl=0,svchp=02EF47E8,srvhp=02F07EDC,usrhp=02F1BC88)
4 ETW000 38 1.240655
4 ETW000 http://dboci.c ,00000 *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
4 ETW000 49161 1.289816
4 ETW000 dev trc ,00000 server_detach(con_hdl=0,stale=1,svrhp=02F07EDC) 30 1.289846
4 ETW000 dev trc ,00000 Detaching from DB Server (con_hdl=0,svchp=02EF47E8,srvhp=02F07EDC)
4 ETW000 73 1.289919
4 ETW000 dev trc ,00000 Deallocating server context handle 02F07EDC 828 1.290747
4 ETW000 http://dbsloci. ,00000 *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 108 1.290855
4 ETW000 dev trc ,00000 set_ocica() -> OCI or SQL return code 1034 22 1.290877
4 ETW000 dblink ,00431 ***LOG BY2=>sql error 1034 performing CON dblink#5 @ 431
4 ETW000 21113 1.311990
4 ETW000 dblink ,00431 ***LOG BY0=>ORA-01034: ORACLE not available 30 1.312020
4 ETW000 ORA-27101: shared memory realm does not exist dblink#5 @ 431
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'CHE'"

Is this your system ABAP+JAVA?
As i'm too getting this problem in AS Java, R3trans -d does fail with RC-12.
But all other my applications are running fine, So need to know the exact reason for same, so any help in this will be appreciated.

How to find out the packages created by a particular user.

Hi,
In a system which i am working.
I want the find the different packages that wer created by me.
How to find it out.
Regards,
Chandru

Hi Chandra
Goto SE21
Package Z* then Press F4.
Person Responsible: Your Login Name
OKAY . This will list all packages made by u.
Reward Points if useful
Regards
Akshay Chonkar

How to find aged out sql_id of shared pool / after flushed shared pool in oracle 10g/11g

Similar Messages

Maybe you are looking for