How to find all open connections details...!

Hi,
Is there a way to find the details of all the open connections. We are actually having 300+ connections established in our server, which we guess would be a cause for slow performance. And we are running on JDK 1.3 version.
Any help/hint would help.
Thanks
SAM

Is there a way to find the details of all the open
connections.
We are actually having 300+ connections
established in our server, which we guess would be a
cause for slow performance. I certainly think that it cant be 300+ concurrent connections. Ideally connections are pooled so the app server would reuse the connection from the pool. However if care is not taken to close the connection in finally block then it may cause connection leaks !
Check the application server log for leaks.
Slow performance is not necessarily caused due to too many connections. You can optimize it by adding appropriate indexes, making the joins to tables so that it uses the index.
In case you use log4j then set the debug level to INFO in log4j.xml.
Too many debug statements causes a lot of I/O operations. Plus there are many more reasons. So try to investigate on these lines.
Cheers
-Rohit

Similar Messages

How to find all open POs and there SUM

How to find all open POs and there SUM
Please help.
Thanks,
vihar9

Have you tried looking at the tables, standard reports, or the PO display transaction? Have you asked your functional analyst or development team lead? This is not a forum to post a requirement and get your job done for you...

How to find all Open POs and PO status

Hi,
1. If I open any PO (we are on ECC6.0), on the PO header status Tab, we can see the status as "Fully Invoiced or Partially Invoiced or Not Invoiced" and similarly for delivery too. Is there any table to see get these statuses directly for any given PO?If no, How do I determine the status manually in the report ?
2. If you get into a PO, follow the menu path Environment-->AC Commitments docs. Choose Funds Management from the Pop-up. This shall generate a report for the document Jounal entries and display the final amounts (final bdgt) there. Is there any table where I can get this amounts for a given PO?
I want to generate a report for all the Open POs based on the different statuses from point 1 and also where its AC Commitments-FM docs amount is not equal to 0.
I checked with my MM consultant for this and he couldnt be of help.
Thanks
Kiran

>
kiran dasari wrote:
> But how can I figure out from EKBE or PO history?
>
> Do I need to compare the quantities from PO & invoices? If yes, what is the case, if there are multiple accounts for a same line item?...will calculation not be very tedious?
>
> Is there any direct shot I can hit to get the status for a given PO and given line item which says....Full Invoiced or Partially Invoiced or Not invoiced and similarly where do I go for delivery statuses?
>
> Thanks
> Kiran
Yes - it is tedious, but that is what we are paid for. You have to look at each line in the PO history table (EKBE), add up the invoices, subtract the returns. There are also some flags mentioned by other posters to determine whether the PO (or PO item) is complete.
Rob

How to find invoice open item

how to find invoice open item.

Hi,
You can get the open items from BSIS.
To get the details of open items you need to do as below :
1. Get all the document numbers from BSIS table based on year(GJAHR) and period (MONAT).
2. Once you get all the open items from BSIS, go to BSAS with the document number retreived from BSIS.
Now you will have two internal tables, one with open items and one with closed items. Now you need to segregate the open items and closed items from BSIS.
loop at it_bsis.
read table it_bsas with key bukrs = it_bsis-bukrs
                                        hkont = it_bsis-hkont
                                        gjhar = it_bsis-gjahr
                                        monat = it_bsis-monat.
if sy-subrc eq 0.
    delete it_bsis.
    clear it_bsis.
endif.
endloop.
Now you are left with only open item only.
Thanks,
Sriram Ponna.

How to find the open PR in SAP

how to find the open PR list in SAP

HI,
Using T-code ME5A - List Display of Purchase Requisitions and give input data's are as follows.
Plant                : _______
Scope of List : ALV
Tick Mark of the below options :
       Assign Purchase Requisition to be tick
       "Partial Ordered" Requisitions to be tick
        Released Requisitions Only to be tick
        Requisition for overall Release to be tick
After that, execute the report shown only released and Open purchase requisition(PR) details.
Hope, it is useful for you.
Regards,
K.Rajendran

How to find all JMX ports on a server?

How to find all jmx ports on particular server (say localhost) on windows
I have multiple JVM's running on my local server, and there is extensive use of JXM mbeans by the applications running on each server. So I want to connect to all these JMX servers and to instrument the MBeans using Jconsole(Jconsole localhost:<port>). But I don't know the port numbers, and its not logged by the application.
How do I find all the ports jmx servers connected?
Note : In my case I can not instrument using the PID.
thanks,
bala K

Hi kajbj,
I tried stop/start the application, but couldn't find any difference in the netstat command. I know it should show the JMX port (I am able to see on a test application), but this application's JMX port usage is missing.
netstat -ano --> Do i need to use any other commands?
I just injected few lines of code ( to list the MBeanServers programatically), to this application (did some usual tweaks to let this code execute at some time) and its listing couple of MBeanServers and lot of MBeans.
MBeanServerFactory.findMBeanServer(null); and so on.....
Is there a way to get the port using the Management API's?
thanks,
bala K

How to save all open document in png 24 by javacsript

how to save all open document in png 24 by javacsript

yeah, i can definitely see how it would be useful for some
people! and
hey, for all i know, i'm the one who's not an average user. i
was
pretty much just saying that i can see how that's something
Firefox
would think to do, but not necessarily a program like
Dreamweaver. but i
agree that it would be a useful feature in lots of programs.
and i think
that what Murray suggested is probably pretty close to what
you're
looking for, if not exactly.
d_macman wrote:
> To respond to both...
>
> courtney (n h c)... I must not be the average user then.
We have many sites,
> and I do a LOT of development, and many times, I may
have several pages with
> several includes on a page. IE, for a form page, I may
have 10-12 pages total
> (including headers, footers, java, PHP process pages,
etc) and to work out the
> processes and for development, I may create several
versions depending on the
> problems I run into.So to not go nuts, I would LOVE to
save the batch of pages
> out, and then be able to re-open them all at once.
Making it easy to jump in an
> out of a test section (I have them saved in a site, and
dont want to make
> second sites just for this purpose).
>
> Not to mention, leaving work and coming back in and
finding out the power went
> out over the weekend and my machine shutdown (and yes, I
have a UPS, but it
> wont run the system for that long).
>
> So, you see why I would like to save them as batch, like
Firefox, way easier.
>
> Murray *ACE* ...
>
> I will try that, I did not even know that was there. Way
cool ! I hope it
> works, especially for power outages, like I mentioned
above!
>
> Thanks all,
>
> Don
>
>

How to find existing DAC connection to sql server

How to find existing DAC connection in sql server

Hi RoyalM,
Vishal has answered your initial question. If you have the connection issue. I suggest you elaborate the issue in a new thread.
You can access DAC using SQLCMD from a command prompt. Or check the existing DAC connection in a command prompt:
1. Open Command Prompt.
2. Type: SQLCMD –S <servername\instance> -d master and press Enter.
1> SELECT name,local_tcp_port FROM sys.dm_exec_connections ec join sys.endpoints e on (ec.endpoint_id=e.endpoint_id) WHERE e.name='Dedicated Admin Connection'
2> go
3. If it returns the result, it means there is an existing DAC connection. It also shows the port used by dedicated admin connection.
Thanks.
Tracy Cai
TechNet Community Support

Muse Accordion widgit, I need to know how I find the (Open Closed ) link it seems to have vanished

Muse Accordion widgit, I need to know how I find the (Open Closed ) link it seems to have vanished all I can find is ( Expand behavior and Overlap Items Below.)

If I got your query right, do you mean you don't have all the options in the Accordion Options panel as pictured below?
If the above is true, can you try re-inserting the Accordion panel and check if the options then become available for you. Also, please check if you're running the latest version of Muse i.e. 4.1.8 as on today.
If the problem persists, please try creating a new Muse project and see if you are able to replicate the behaviour on a fresh Muse site as well.
Thanks,
Vinayak

How to get all open sales orders of a customer and also account group

I want to know the logic to find all open sales orders of a customer and also account group

Hi,
You can check the status weather a Sales order is Open or not by checking its billing status form the following:
Check table VBUK and VBUP for delivery status "LFSTK" and billing status "FKSTK".
Rward points if helpful answer.
Ashven

How to find all the tables associated for a particular transaction

Hi-
May I know how to find all the tables, related(foreign key) tables for a transaction within SAP GUI?
Up to my technical knowledge, this can be achieved by looking database diagrams from DB level. But that would be for entire database as a whole. What I'm expecting is to see transaction level relative tables that too from SAP GUI. Please share the possibilities if any.
Regards
Sekhar

Dear Micky Oestreich
May be we possess expertise or high level experience, it should not show up in our way of communication. Every professional starts with the basic stuff to learn. When the question is raised in such minimum polite way, the same level of courtesy is expected in return. If you felt my question was basic, you might have refused it gently. If you are in good mood or bad mood it doesn't matters.
Hi Vengal Rao
Thanks for your response. It helped me.
Regards
Sekhar

How to find all solutions for reordering of vector

hello everyone
-I have problem in finding all possible solutions for reordering of vector.
-I have vector named (vect_temp) and I want to find all possible reordering of this vector.
-I have function named Min_diff(vect_temp,next_point) works as follows : I should gave it an element (next_point) in the vector (vect_temp) and it must generate the vector (vect_diff) that contains all possible elements next elements.
-The function nex_min(vect_temp,next_point) works as follows : I should gave it an element (next_point) in the vector (vect_temp) and it must generate the vector (vect_min) that contains all possible elements next elements.
-reordering critriea:
-Min_diff(vect_temp,next_point) and nex_min(vect_temp,next_point) and (next_point) in this first iteration is equal to any selected element in the (vect_temp). after calling the functions, if element in the (vect_diff) is equal to the element in ( vect_min) then add this element into the ordered set [ vec_ordering] and call functions Min_diff(vect_temp,next_point) and nex_min(vect_temp,next_point) again , next_point now is the equal to the element that we have been added in the previous step into the ordered set [ vec_ordering] and repeat this process until all elements in (vect_temp) are ordered according to this criteria.
- I'm able to do reordering according to the cirtira above and find one solution. but the problem is that if (vect_diff) contains many elements that equal to many elements in ( vect_min), in this case I need to do reordering for the first equal element and this will be one solution and then find reordering for the next equal element and so on.
let's consider this example:
- let (vect_temp) contains element [5,9,7,3,1]
- for the firs iteration let the next_point equal to 7
- after calling function Min_diff(vect_temp,next_point), then (vect_diff) will contain [ 5,9,3]
- after calling function nex_min(vect_temp,next_point), then ( vect_min) will contain [ 5,9]
so for now (vect_diff) and ( vect_min) will have two equal elements.
- the first solution must be that fist take the first equal element and do reordering such that ordered set [ vec_ordering] will equal to [7,5] then call functions Min_diff(vect_temp,next_point), and nex_min(vect_temp,next_point) again. the( next_point) in this iteration is qual to 5, these funtions will find next elements, let's consider that (vect_diff) and ( vect_min) will have equal element [3] then add this element to the ordered set [ vec_ordering] and repeat calling functions util all elments in (vect_temp) are added to the ordered set [ vec_ordering]. This will be one solution. now the second solution will be is to take second equal elment [9] instead of [5] and continue calling functions and finding ordered list.
so that each time vect_diff and vect_min will have many equal elements, then do reordering for first equal element this is one solution and then do reordering for the second equal element and so on.
-my code that can only find one solution that takes only first equal element in (vect_diff) and ( vect_min) and continue ordering is below
for (int y = 0; y < vect_temp.size(); y++) {
     Min_diff(vect_temp);
     nex_min(vect_temp, next_point);
    for (int i = 0; i < vect_diff.size(); i++) {
     String element_min = vect_diff.get(i).toString();
     if (vect_min.contains(element_min)) {
       vec_ordering.add(element_min);
     _2nd_min_element = element_min;
      vec_temp.removeElement(next_point);
      next_point = _2nd_min_element;
      i = vect_diff.size();
     }// end if condition
    } // end for (i)loop
}// end for (y) loop
I hope that someone can answer me how to find all posssible reordering set it is urgent pleasssssse

DarrylBurke wrote:
Two months on and you still haven't done your own homework?
[http://forums.sun.com/thread.jspa?threadID=5423090]
dbWell, nobody has given the answer yet, so how can (s)he?

How to view all open tabs?

I know how to view all open tabs for one Safari window but how do you view all open tabs for all open windows?

Bookmarks menu > Add These x Tabs to Reading List
Click the Reading List icon:
I think that is as good as it's going to get.

How to find hard drives connected to router on my mac

how to find hard drives connected to router on my mac

Hello Thatguy1233,
It sounds like you have a Time Machine back up of your computer that you would like to restore. You may be able to use the following article to restore that backup:
OS X Lion: Recover your entire system
http://support.apple.com/kb/ph4351
Make sure your Time Machine backup disk is connected and turned on. If your backup disk is on a network, make sure your computer is on the same network.
Choose Apple menu > Restart, and then hold down the Command (⌘) and R keys while the computer restarts.
Select “Restore from a Time Machine Backup,” and then click Continue.
Depending on your type of backup disk, do one of the following:
If you use an external disk, select it and click Continue.
If you use a Time Capsule, choose your AirPort network from the AirPort menu on the right side of the menu bar, and then select your Time Capsule and click “Connect to Remote Disk.”
If you use a network disk, select it and click “Connect to Remote Disk.”
If necessary, enter the name and password you use to connect to your backup disk, and then click Connect.
Select the date and time of the backup you want to restore, and then follow the onscreen instructions.
After you restore your system from a Time Machine backup, Time Machine may perform a full backup at the next scheduled backup time. This is normal. Time Machine resumes incremental backups after the full backup is completed.
Thank you for using Apple Support Communities.
Take care,
Sterling

How to find the server connected from multiple switched netwtwork

I have one server connected to distrubted switch or acces switch in network .
They were 45 switches in netwrok and need help how to find that server connected switch from Core switch ?
How many mehtodes and process we can use to find that connected physical switch ?
Thanks in advance !!!

It's a bit of a tedious process. but if you ping the IP address of the server from the core switch and then check the ARP entry to get its MAC address, you can then trace the address tables in the switches to find the switch that the server is physically connected to. Once you have the MAC address, you'll have to check the address table in each switch in the path between the core and the server to find it.

How to find all open connections details...!

Similar Messages

Maybe you are looking for