How to find all pages using table

Hi,
Can someone help me to find list of APEX pages in an application that as based on a particular database table.
Basically, I need to find the page names that needs to be modified on a change on database table structure.
Thanks in advance
Aali

The APEX 'Database Object Dependencies' report can help too
From the APEX Builder
Home>Application Builder>Application 102>Application Reports>Shared Components>Database Object Dependencies
Varad

Similar Messages

How to set all pages using template A to instead use template B?

I am using Dreamweaver Web CS4.
I have inherited a website that uses Dreamweaver templates. In the website, the previous webmaster used several different templates for different sections of the site.
I am trying to redesign the website to use PHP includes to decrease the bloat of the site. As such, I am trying to change the template for all pages on the site to the new one that I have designed. I have not found a way to do this. I can select pages individually and change their templates but I have not found a way to do a batch template update. Is there a way to do this? If not, can anyone think of a better way to standardize the website rather than updating templates individually?

You would definitely want to add the title editable region. Each page should have a page-specific title for optimal SE exposure. Without that editable region, you wouldn't be able to create page-specific titles.
So - add the title editable region. Now your two templates have the same number of editable regions, each with the same name.
Then all you have to do is to close *all* files in DW. Then do a find and replace like this -
FIND -
/Templates/template_A.dwt
REPLACE -
/Templates/template_B.dwt
Make a backup of the whole site first.
Finally, open template_B, make a trivial change and reverse it. Save template_B and update the whole site. That should do the trick.

How to find all the DDIC tables and fields of Tcode?

Hi All,
For several transactions we have caprtured all the filed names along with the technical names.
Ex : in VA03 - in the initial screen ,postal code field is there.When i see F1 help for that field i could see POST_CODE2 as its technical name.
But i want to see the actuall DDIC table field which corresponds to this field that is LFA1-PSTLZ.
Like wise there are so many T-codes for which i need do the same thing.But for some transactions i am unable to find out the database tables and the corresponding fields.Please suggest any other easier way to do this.
Is there any way to find out all the DDIC tables and fields that gets updated for a Tcode?
Please help me out in this.
Thanks,
Jyothi D.
Edited by: jyothi dosapati on Mar 27, 2008 2:48 PM

HI,
DDIC tcode is SE11
GIVE THE TABLE NAME THERE AND CLICK DISPLAY
FOR EXAMPLE
TYPE LFA1 THERE AND CLICK DISPLAY....
Regards,
V .Balaji
Reward if usefull

ASE 15.7 how to find data entry using table page nr

Hi,
I am looking for a dbcc () to get data when I know page number from a table
Thank you

Hi Isabella,
What your asking is not supported by SAP .. although you can achieve the result by using dbcc page:
http://wiki.scn.sap.com/wiki/display/SYBASE/DBCC+page
The only problem is that the data is in binary format so you have to format it by yourself to a readable format.
Regards,
Adam

How to print all pages using ALV from CL_SALV_TABLE?

Dear friends,
I have a report which displays a dynamic internal table using CL_SALV_TABLE. The display format is normal list.
And since this dynamic internal table is big, I have divided it into a sub internal table which displays 10 columns in one page at one time. And each page is displayed using a customized button that I set as MyFunction.
The problem is, when I click List->Print or Ctrl-P, the system will only send to spool the current page even though in the Print dialog box, I choose Print All option.
Is there a way to rectify this? Thanks.

Hi,
Try this..code...the above FM expects purchasing organization..revised code below mentioned..
please try..
DATA: kdy_val(8) VALUE '/110'.
SET PARAMETER ID 'LIF' FIELD 'VENDOR'. " Pass the vendor
SET PARAMETER ID 'KDY' FIELD KDY_VAL.
CALL TRANSACTION 'XK03' AND SKIP FIRST SCREEN.
Thanks
Naren

I prepare chronologies in word, and i am trying to do the same in pages using tables and cells. But somtimes i need a cell to wrap onto the next page but I can't work out how to do it - any suggestions would be greatly appreciated

I prepare chronologies in word, and I am trying to do the same in pages using tables and cells. But sometimes I need a cell to wrap onto the next page because the contents are bigger than the page or the space left on the page, but I can't work out how to do it - any suggestions would be greatly appreciated

brendanfromsydney wrote:
What are the different opinions on why pages should not achieve this?
As far as I know, Apple is free to choose to offer this or that feature.
They never said that they want to clone Word or even compete with it.
Differences between tables in both worlds are numerous.
In Pages (or Numbers)
- we can't sort a single column
- we can't sort by row
- we can't insert or remove a single cell
- a cell can't cross pages boundaries
If I understand well these design choices match :
++-+-+-+-+-+-+-+-++
Apple Human Interface Guidelines:
Apply the 80 Percent Solution
During the design process, if you discover problems with your product design, you might consider applying the 80 percent solution‚ that is, designing your software to meet the needs of at least 80 percent of your users. This type of design typically favors simpler, more elegant approaches to problems.
If you try to design for the 20 percent of your target audience who are power users, your design may not be usable by the other 80 percent of users. Even though that smaller group of power users is likely to have good ideas for features, the majority of your user base may not think in the same way. Involving a broad range of users in your design process can help you find the 80 percent solution.
+-+-+-+-+-+-+-+-+-++
Yvan KOENIG (VALLAURIS, France) jeudi 9 juin 2011 16:03:52
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

How to get all rows in table to red using alternate rows properties option

How to get all rows in table to red using alternate rows properties option

Hi Khrisna,
You can get all rows red by selecting the color red in the "Color" and "frequency" to 1 under the "Alternate Row/Column colors".
I tried doing it and the colors freaked me out (all red) :-D
Kindly tell me if im missing something.
Regards,
John Vincent

How to find all the tables associated for a particular transaction

Hi-
May I know how to find all the tables, related(foreign key) tables for a transaction within SAP GUI?
Up to my technical knowledge, this can be achieved by looking database diagrams from DB level. But that would be for entire database as a whole. What I'm expecting is to see transaction level relative tables that too from SAP GUI. Please share the possibilities if any.
Regards
Sekhar

Dear Micky Oestreich
May be we possess expertise or high level experience, it should not show up in our way of communication. Every professional starts with the basic stuff to learn. When the question is raised in such minimum polite way, the same level of courtesy is expected in return. If you felt my question was basic, you might have refused it gently. If you are in good mood or bad mood it doesn't matters.
Hi Vengal Rao
Thanks for your response. It helped me.
Regards
Sekhar

How to find the columns and tables used in a stored procedure?

Hi,
Can someone suggest how to find the columns and tables used within a stored procedure?
Thanks
VBK

For example:
SQL> create or replace
2    procedure p1
3      is
4          cnt number;
5      begin
6          select count(*) into cnt from emp;
7 end;
8 /
Procedure created.
SQL> select referenced_owner,
2          referenced_name
3    from dba_dependencies
4    where owner = 'SCOTT'
5      and name = 'P1'
6      and referenced_type = 'TABLE'
7 /
REFERENCED_OWNER               REFERENCED_NAME
SCOTT                          EMP
SQL> SY.

How to find max(time) from table using group by

how to find max(time) from table using group by
select var max(time)
          from table
          into (var1, time1)
           where .....
             group by var.
it is fetching record which is top in table.
if u can help?
regards.

No this will fetch the maximum time from teh table.
select var max(time)
from table xxxx
into (var1, time1)
where .....
group by var.
Refer this code
TABLES SBOOK.
DATA: COUNT TYPE I, SUM TYPE P DECIMALS 2, AVG TYPE F.
DATA: CONNID LIKE SBOOK-CONNID.
SELECT CONNID COUNT( * ) SUM( LUGGWEIGHT ) AVG( LUGGWEIGHT )
       INTO (CONNID, COUNT, SUM, AVG)
       FROM SBOOK
       WHERE
         CARRID   = 'LH '      AND
         FLDATE   = '19950228'
       GROUP BY CONNID.
WRITE: / CONNID, COUNT, SUM, AVG.
ENDSELECT.

How to find the average of table row values it should display in next row in libwindow/CVI

Hi,
How to find the average of table row values it should display in next row in libwindow/CVI
Please let me know the solution.

There isn't a built-in function to perform calculations on thable cells. What you can do is to retrieve thable cells values and calculate the average by yourself.
To retrieve a bunch of cells in a single instruction you can use GetTableCellRangeVals: prerequisite for this function to work correctly is that cells are all included in a Rect structure (shortly, a rectangle) and are all of the same data type. See the help for the function for some explanations and the link to an example of its usage. In Cell range parameter you can pass VAL_TABLE_ROW_RANGE (row) macro to retrieve an entire row. See here for details.
Once you have retrieved cell values in an array, you can pass it to Mean function to calculate the average.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to find Port numbers used by RMI application

Hi, hope u all find me a solution, how to find port numbers used in the RMI application, that is port number which the RMI application communicates between RMIserver and RMIclient. ur answers would b highly appreciated

Currently RMI transport layer does not directly expose any public methods to get the listening ports of the exported RMI objects, but the application can always export RMI server objects at certain designated ports instead of relying on the RMI runtime by specifying them to UnicastRemoteObjcect at the time of exporting.
RMI transport layer try to optimize the number of listeing sockets by exporting all RMI server objects on a single port if no explicit ports were chosen. If the application is really interested in knowing the listeing ports, it can always specify the client and server socket factories to be used for creating Socket and ServerSocket to the RMI runtime at the time of exporting. When a RMI server object is exported, but the listening socket is not yet created, RMI transport layer invokes the createServerSocket(host, port) of server socket factory by passing the host and port details. If no explicit port is specified, underlying socket implementation choses anonymous port. At this point of time application can log these listeing ports to some log file.
Similarly when the stub to the remote object is de-serialized in the client address space, it does also contain the client socket factory along with the end point details (host, port and server object ID). RMI runtime in the client address space needs to establish connection with the remote server object, it try to get the socket from client socket factory by invoking createSocket() on the client socket factory. Now the application can call getLocalPort() on the socket before returning it to the RMI transport layer.
There is a undocumented class RMIStat to dump RMI runtime state information. It provides a lot of static methods to dump RMI state information like object table, transports, threads etc. You can download the source code of this utility from RMI archives, but remember this is not a comman-line utility, you must invoke these static methods as part of the application code.
-- Srinath Mandalapu

How to find all open POs and there SUM

How to find all open POs and there SUM
Please help.
Thanks,
vihar9

Have you tried looking at the tables, standard reports, or the PO display transaction? Have you asked your functional analyst or development team lead? This is not a forum to post a requirement and get your job done for you...

How to find all JMX ports on a server?

How to find all jmx ports on particular server (say localhost) on windows
I have multiple JVM's running on my local server, and there is extensive use of JXM mbeans by the applications running on each server. So I want to connect to all these JMX servers and to instrument the MBeans using Jconsole(Jconsole localhost:<port>). But I don't know the port numbers, and its not logged by the application.
How do I find all the ports jmx servers connected?
Note : In my case I can not instrument using the PID.
thanks,
bala K

Hi kajbj,
I tried stop/start the application, but couldn't find any difference in the netstat command. I know it should show the JMX port (I am able to see on a test application), but this application's JMX port usage is missing.
netstat -ano --> Do i need to use any other commands?
I just injected few lines of code ( to list the MBeanServers programatically), to this application (did some usual tweaks to let this code execute at some time) and its listing couple of MBeanServers and lot of MBeans.
MBeanServerFactory.findMBeanServer(null); and so on.....
Is there a way to get the port using the Management API's?
thanks,
bala K

How to find the list of Tables....

Hi
How to find the list of Tables associated with When a Goods Issue is done for a Process Order ??
Kindly tell me step-by-step procedure in browsing it.
cheers
MaruthiRam

Hi
goto SE16 Click F4, You have two options Information system & Sap Applications.
Click on SAP Applications & selec the application you wnat to see, for E.g Purchasing you can click on materials managemnt, Purchasing if you drill down you will see the list of tables....
reward points if useful
Thanks & Regards
Kiran

How to find all pages using table

Similar Messages

Maybe you are looking for