How to find an include's function module

Hi all,
How can we find the fm of an include?
Thanks.

Hi..
You can find the FM name using the Include name in this way..
For EG:
INCLUDE LSBDCU14. "BDC_OPEN_GROUP
In this SBDC is the Name of the Function Group.
So in SE37 Open this Function Group SBDC and Check the Include where all the Function modules are stoted.
Now u can find the Include . Double click on this to see the FM.
reward if Helpful.

Similar Messages

How to find out the inbound function module in the extended idoc

Hi,
how to find out the inbound function module in the extended idocs
Thanks .

through we41/we42 you can find the inbound function module.......
or
thorough we19(idoc test tool) ....
give the input as message type or basic idoc..
press exec...
then you can find th button on application tool bar as inbound funtion module....
from here also you can find..........
<REMOVED BY MODERATOR>
Khasimsa
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 1:34 PM

How to find the outbound idoc function module?(Urgent)

Dear All,
How to identify the outbound function module if there is process code assigned to message type.
For partner profile the mesasge type is assigned and idoc type .This is the only information maintained .
Now my question is how to identify the fucntion module which is getting trigger in the system is there any data maintained in the standard table or any t-code .
Points will be rewarded for right answers.
Thank You.
Regards,
Ravi Ganji

Hi,
If u know the message and basictype then we can know the process code for that message type in transaction code WE64.
if we know process codes then we can know the function modules in transaction codes WE41(Outbound process code) and WE42(Inbound process code).
Each process code is attached with a FM...
Reward if helpful
Regards,
Nagaraj

How to find the names of Function Module used in the program

Hi all,
can you people help me with this issue.I want to the names of all the Function Module used in the program along with their parameters into an internal table.It will be helpful for your suggestions.
Kind Regards,
Edited by: Prasenjit Sengupta on Nov 20, 2008 7:39 AM

Take structure of internal table as
TYPES : BEGIN OF TY_FM,
        FUNCNAME TYPE RS38L_FNAM, "Name of Function Module
        PARAMETER TYPE RS38L_PAR_, "Parameter name
        PARAMTYPE TYPE RS38L_KIND, " Parameter type
        R3STATE TYPE R3STATE,      "ABAP: Program Status (Active, Saved, Transported...)
        STRUCTURE TYPE RS38L_TYP, "Associated Type of an Interface Parameter
        DEFAULTVAL TYPE RS38L_DEFO,"Default value for import parameter
        REFERENCE TYPE RS38L_REFE, "Call by reference
        OPTIONAL TYPE RS38L_OPTI, "Optional parameters
        TYPE TYPE RS38L_TYPE,      "Reference Structure is an ABAP/4 Type
        END OF TY_FM.
DATA : IT_FM TYPE TABLE OF TY_FM WITH HEADER LINE.

How to write the exceptions in function module

dear all,
how to write the exceptions in function modules with example.
thanq
jyothi

Hi,
Raising Exceptions
There are two ABAP statements for raising exceptions. They can only be used in function modules:
RAISE except.
und
MESSAGE.....RAISING except.
The effect of these statements depends on whether the calling program handles the exception or not. The calling program handles an exception If the name of the except exception or OTHERS is specified after the EXCEPTION option of the CALL FUNCTION statement.
If the calling program does not handle the exception
· The RAISEstatement terminates the program and switches to debugging mode.
· The MESSAGE..... RAISING statement displays the specified message. Processing is continued in relation to the message type.
If the calling program handles the exception, both statements return control to the program. No values are transferred. The MESSAGE..... RAISING statement does not display a message. Instead, it fills the system fields sy-msgid, sy-msgty, sy-msgno , and SY-MSGV1 to SY-MSGV4.
Source Code of READ_SPFLI_INTO_TABLE
The entire source code of READ_SPFLI_INTO_TABLE looks like this:
FUNCTION read_spfli_into_table.
""Local Interface:
*" IMPORTING
*" VALUE(ID) LIKE SPFLI-CARRID DEFAULT 'LH '
*" EXPORTING
*" VALUE(ITAB) TYPE SPFLI_TAB
*" EXCEPTIONS
*" NOT_FOUND
SELECT * FROM spfli INTO TABLE itab WHERE carrid = id.
IF sy-subrc NE 0.
MESSAGE e007(at) RAISING not_found.
ENDIF.
ENDFUNCTION.
The function module reads all of the data from the database table SPFLI where the key field CARRID is equal to the import parameter ID and places the entries that it finds into the internal table spfli_tab. If it cannot find any entries, the exception NOT_FOUND is triggered with MESSAGE ... RAISING. Otherwise, the table is passed to the caller as an exporting parameter.
Calling READ_SPFLI_INTO_TABLE
The following program calls the function module READ_SPFLI_INTO_TABLE:
REPORT demo_mod_tech_fb_read_spfli.
PARAMETERS carrier TYPE s_carr_id.
DATA: jtab TYPE spfli_tab,
wa LIKE LINE OF jtab.
CALL FUNCTION 'READ_SPFLI_INTO_TABLE'
EXPORTING
id = carrier
IMPORTING
itab = jtab
EXCEPTIONS
not_found = 1
OTHERS = 2.
CASE sy-subrc.
WHEN 1.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno.
WHEN 2.
MESSAGE e702(at).
ENDCASE.
LOOP AT jtab INTO wa.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDLOOP.
The actual parameters carrier and jtab have the same data types as their corresponding interface parameters in the function module. The exception NOT_FOUND is handled in the program. It displays the same message that the function module would have displayed had it handled the error.
Or
just have to decide what exceptions u want and under what conditions.
then declarethese exeptions under the exceptions tab.
in the source code of ur function module.
if
like this u can code .
now when u call the function module in tme mainprogram.
if some error occurs and u have declared a exception for this then it will set sy-subrc = value u give inthe call of this fm.
in the fm u can program these sy-subrc values and trigger the code for ur exception.
Please reward if useful
Regards,
Ravi
Edited by: Ravikanth Alapati on Mar 27, 2008 9:36 AM

How to call a remote capable function module?

Hi all,
I want to call a bapi from a R/3 that is not available in the current system were i have my WebDynpro Abap application.
So, i called the wizard "Service Call".
In the Select Service step i have to input the destination and Function Module and
Before i specified an RFC destination .
The wizard cannot find the function.
I read the Note:
The function module must exist in the current system! The wizard does not support to call a remote capable function module that does not exist in the current system.
The question is :
How can i call remote capable function module?
Thanks,
Ari

Hi,
this link might help you : <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/22/0424ba488911d189490000e829fbbd/frameset.htm">rfc in abap</a>
grtz
Koen

Simple Examples on ABAP Objects without using include or function modules

Hi,
I am new to ABAP. I need simple example codes on ABAP Objects. It should not have Includes or Function Modules. Just simple codes, using local & global classes, interfaces etc. I searched the forum and even <<the site that shall not be mentioned>>, but did not find a solution. Kindly help please.
Regards,
Smruthi.
Edited by: Matt on Mar 1, 2009 1:20 PM - forbidden site reference removed

Hello Smruthi
If you go to the Forum Search and choose the forum ABAP Objects then serach for ZUS_SDN and you will find many of my simple sample reports.
These reports usually do not contain any includes but they may call function modules which makes perfectly sense. For example, if you are still doing a direct table SELECT instead of using an available BAPI (or class) to get a business object then this is a clear sign of poor (=non-ABAP-OO) programming.
Regards
Uwe

What are the Includes in Function Module...? if the fuction group IS ZSJ_FC

What are the Includes in Function Module...? if the fuction group IS ZSJ_FC..?
How can I access SAP through Internet....?
Moderator Message: Interview-like question(s). Thread locked.
Edited by: Suhas Saha on Sep 30, 2011 11:14 AM

Hi
No! U can insert an own you Z-INCLUDE or somethingelse, try to regenerate the index of the program.
Max

Creating Includes for Function Modules

Hi Experts,
Can you please let me know how to create includes for function modules.
I came across this in a standard include program, which was generated by a function library. The includes inside this program where linked to the function modules (when I double clicked on them).
Please let me know how to create it.
Thanks in advance !
Regards,
Anand Patil.

Hi,
have a look at the code for better understanding
Declaration of Workareas *
DATA: lwa_e1bp2017_gm_item_create TYPE e1bp2017_gm_item_create,
 lwa_data TYPE edidd, " Work area for IDOC
 lwa_control TYPE edidc. " Work Area for control rec
Read the control data information of idoc.
loop at idoc_contrl INTO lwa_control Where mestyp = lc_mbgmcr.
Extract the data from the segments.
 LOOP AT idoc_data INTO lwa_data
 WHERE docnum = lwa_control-docnum and
 segnam = lc_item_create.
*->> Set the tabix of the internal table
 lv_index = sy-tabix.
Move the Material Document Item Segment data
 MOVE lwa_data-sdata TO lwa_e1bp2017_gm_item_create.
Modify the material document item data internal table
 PERFORM sub_modify_idocdata changing lwa_e1bp2017_gm_item_create.
*->> set the changed values to the IDOC SDATA
 MOVE lwa_e1bp2017_gm_item_create TO lwa_data-sdata.
*->> Modify the table
 MODIFY idoc_data FROM lwa_data index lv_index.
Clear the Work areas
 CLEAR : lwa_data,
 lwa_e1bp2017_gm_item_create.
 ENDLOOP. "LOOP AT t_idoc_data
Call the BAPI function module to create the
appropriate Material Document
 CALL FUNCTION 'BAPI_IDOC_INPUT1'
 EXPORTING
 input_method = input_method
 mass_processing = mass_processing
 IMPORTING
 workflow_result = workflow_result
 application_variable = application_variable
 in_update_task = in_update_task
 call_transaction_done = call_transaction_done
 TABLES
 idoc_contrl = idoc_contrl
 idoc_data = idoc_data
 idoc_status = idoc_status
 return_variables = return_variables
 serialization_info = serialization_info
 EXCEPTIONS
 wrong_function_called = 1
 OTHERS = 2.
 IF sy-subrc = 1.
 RAISE wrong_function_called.
 ENDIF.
endloop.
ENDFUNCTION.
here when we write the statment
PERFORM sub_modify_idocdata changing lwa_e1bp2017_gm_item_create and double click on sub_modify_idocdata .
it will create a include with the name "LZDTSINT052F_GPOMS_GMF01 ".
now we can write the FORM ..END FORM In this inculde.like this.
***INCLUDE LZDTSINT052F_GPOMS_GMF01 .
*& Form sub_modify_idocdata
Modify the material document item data internal table
FORM sub_modify_idocdata
CHANGING pwa_e1bp2017_gm_item_create TYPE e1bp2017_gm_item_create.
contant declaration
CONSTANTS: lc_261(3) TYPE c VALUE '261'.
DATA : lv_aplzl LIKE resb-aplzl,
 lv_aufpl LIKE resb-aufpl,
 lv_subrc LIKE sy-subrc,
 lv_charg LIKE resb-charg,
 lv_uom LIKE pwa_e1bp2017_gm_item_create-entry_uom.
CLEAR: pwa_e1bp2017_gm_item_create-reserv_no,
 pwa_e1bp2017_gm_item_create-res_item.
*->> Get SAP storage bin & Storage type from the Z table
SELECT lgtyp lgpla
 INTO (pwa_e1bp2017_gm_item_create-stge_type,
 pwa_e1bp2017_gm_item_create-stge_bin)
 UP TO 1 ROWS
 FROM zdtsint050_sttyp
 WHERE zstorage_typ = pwa_e1bp2017_gm_item_create-stge_type
 AND zstorage_bin = pwa_e1bp2017_gm_item_create-stge_bin.
ENDSELECT.
IF sy-subrc NE 0.
 CLEAR: pwa_e1bp2017_gm_item_create-stge_type,
 pwa_e1bp2017_gm_item_create-stge_bin.
ENDIF.
PERFORM get_oper CHANGING pwa_e1bp2017_gm_item_create.
Get the Reservation number and Reservation item number
basing on the idoc data.
SELECT rspos werks lgort
 INTO (pwa_e1bp2017_gm_item_create-res_item,
 pwa_e1bp2017_gm_item_create-plant,
 pwa_e1bp2017_gm_item_create-stge_loc)
 FROM resb
 UP TO 1 ROWS
 WHERE rsnum = pwa_e1bp2017_gm_item_create-reserv_no
 AND matnr = pwa_e1bp2017_gm_item_create-material
 AND charg = pwa_e1bp2017_gm_item_create-batch
 AND aufnr = pwa_e1bp2017_gm_item_create-orderid
 AND vornr = pwa_e1bp2017_gm_item_create-activity
 AND bwart = lc_261.
ENDSELECT.
IF sy-subrc <> 0.
Start of insertion for R31K993797
 CLEAR lv_charg.
 SELECT rspos werks lgort
 INTO (pwa_e1bp2017_gm_item_create-res_item,
 pwa_e1bp2017_gm_item_create-plant,
 pwa_e1bp2017_gm_item_create-stge_loc)
 FROM resb
 UP TO 1 ROWS
 WHERE rsnum = pwa_e1bp2017_gm_item_create-reserv_no
 AND matnr = pwa_e1bp2017_gm_item_create-material
 AND charg = lv_charg
 AND aufnr = pwa_e1bp2017_gm_item_create-orderid
 AND vornr = pwa_e1bp2017_gm_item_create-activity
 AND ( splkz = 'X' or
 splkz = space )
 AND bwart = lc_261.
 ENDSELECT.
 IF sy-subrc <> 0.
End of insertion for R31K993797
 SELECT SINGLE werks lgort
 INTO (pwa_e1bp2017_gm_item_create-plant,
 pwa_e1bp2017_gm_item_create-stge_loc)
 FROM resb
 WHERE rsnum = pwa_e1bp2017_gm_item_create-reserv_no.
 CLEAR : pwa_e1bp2017_gm_item_create-reserv_no,
 pwa_e1bp2017_gm_item_create-res_item.
 ENDIF.
ENDIF.
get SAP UOM
SELECT SINGLE zsap_uom
 INTO lv_uom
 FROM zca_uom_conv
 WHERE zext_uom = pwa_e1bp2017_gm_item_create-entry_uom.
IF sy-subrc = 0.
 pwa_e1bp2017_gm_item_create-entry_uom = lv_uom.
ENDIF.
ENDFORM. " sub_modify_idocdata
*& Form get_oper
 Get the operation
 <--P_PWA_E1BP2017_GM_ITEM_CREATE_RE Segment
FORM get_oper CHANGING p_pwa_e1bp2017_gm_item_create TYPE
 e1bp2017_gm_item_create.
DATA : l_aufpl LIKE afko-aufpl,
 l_aplzl LIKE afvc-aplzl.
REFRESH : i_op.
UNPACK p_pwa_e1bp2017_gm_item_create-orderid TO
 p_pwa_e1bp2017_gm_item_create-orderid.
Get the reservation and routing number for the order
SELECT SINGLE
 rsnum
 aufpl
 FROM afko
 INTO (p_pwa_e1bp2017_gm_item_create-reserv_no,
 l_aufpl)
 WHERE aufnr = p_pwa_e1bp2017_gm_item_create-orderid.
IF sy-subrc = 0.
 CALL FUNCTION 'CONVERSION_EXIT_NUMCV_INPUT'
 EXPORTING
 input = p_pwa_e1bp2017_gm_item_create-activity
 IMPORTING
 output = p_pwa_e1bp2017_gm_item_create-activity.
ENDIF.
ENDFORM. " get_oper
Regards,
nagaraj

How to use Logical database in function module?

I will create a function module in HR.
but how to use Logical database in function module ? Logical database PNP always show screen.in function (RFC) code , it is a matter.

You cannot attach the LDB to the main program of the function group.
- So you may [SUBMIT|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=submit&adv=false&sortby=cm_rnd_rankvalue] a report which use the LDB and get back the data (export/import), by default in the syntax of SUBMIT the selection-screen will not be displayed
- Use [LDB_PROCESS|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=ldb_process&cat=sdn_all], fill a structured table for selection, and get data back in another table
- Use [HR function modules to read Infotypes|https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=hrfunctionmodulestoread+Infotypes&adv=false&sortby=cm_rnd_rankvalue].
Regards

How to increase line-size in Function module

Hi All,
How to increase line-size in function module..
I am displaying a list in function module.The output is of width more than 150..
Regards,
Srinivas

Hi Srini,
U can try by setting the system variable SY-LINSZ = 150.
or
Use new page command.
Vasanth

How to use a user defined function module in IP

Hi All,
Can you please guide me on how to use a user created function module in IP? My requirement is to have 2 exit function modules to be used in IP to load the falt file data into a cube..
Regards,

Hi,
/people/marc.bernard/blog/2007/11/25/how-to-load-a-file-into-sap-netweaver-bi-integrated-planning-part-1
thanks to Marc Bernard
Regards

How to capture errors when a Function module is called as BACKGROUND TASK

How to capture errors when a Function module is called as BACKGROUND TASK?.Please advise.
FUNCTION ZRPM_DELETE_PROJECT_DATA_API.
""Local interface:
*" IMPORTING
*"     VALUE(IV_EXTERNAL_ID) TYPE RPM_TV_EXTID OPTIONAL
*"     VALUE(IV_PROJECT_GUID) TYPE RPM_TV_GUID OPTIONAL
*"     VALUE(FLAG) TYPE BOOLEAN OPTIONAL
*" EXPORTING
*"     VALUE(EV_RC) TYPE I
*"     VALUE(EV_MSG) TYPE STRING
*"     VALUE(ET_MSG) TYPE RPM_TT_MESSAGES
IF flag = cl_rpm_co=>sc_true.
    Call function 'RPM_DELETE_PROJECT_DATA' IN BACKGROUND TASK
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_RC
        ET_MSG          = ET_MSG.
    COMMIT WORK.
ELSE.
    CALL FUNCTION 'RPM_DELETE_PROJECT_DATA'
      EXPORTING
        IV_EXTERNAL_ID = IV_EXTERNAL_ID
        IV_PROJECT_GUID = IV_PROJECT_GUID
      IMPORTING
        EV_RC           = EV_RC
        EV_MSG          = EV_MSG
        ET_MSG          = ET_MSG.
ENDIF.
ENDFUNCTION.
In above code how to capture 'EV_RC' when FM is called as background task.

Prakash,
CALL FUNCTION IN BACKGROUND TASK allows no IMPORTING parameters, so that your code will produce a syntax error.
The calling program can only handle errors of remote function calls (RFC) if these are either
- synchronous RFC (that is CALL FUNCTION ... DESTINATION ...) or
- asynchronous RFC (that is CALL FUNCTION STARTING NEW TASK ... DESTINATION ...).
Both synchronous and asynchronous RFC allow the capturing of errors by means of exceptions. But that is a different topic.

How to Create a Remotely Enabled Function Module

Hi All,
How to Create a Remotely Enabled Function Module.
I Want to Create a FM Using Sample Data , This for Practice
What Fields can i give in the Import and Export Parameters.
Please Give me one Example
Can Any one Give me the Steps to do this.
Regards
Vamsi

Hi Vamsi,
Lets do simple example where you will first create a RFC in one server (say A) and create normal program in othere server (say B). Finally you will call the RFC in A from B.
Do the following steps for creating RFC in server A.
1. log on to server A
2. go to se37
3. Edit -> function groups-> create function group and give the function group name (say ZGRP).
4. create a FM ( say Z_TEST_RFC) in se37 providing the function group which is created just now.
5. go to attribute tab -> choose remote-enabled module from processing type.
so that your FM will become RFC.
6. provide the import parameter in import tab.
we will provide only two import parameters.
- parameter name : P_NUM1, typing: TYPE, associated type : I & check the pass value (all the parameters of RFC must pass by value).
- parameter name : P_NUM2, typing: TYPE, associated type : I & check the pass value
7. provide the export parameter in export tab.
parameter name : P_SUM, typing: TYPE, associated type : I & check the pass value
8. write the given simple code in source code tab.
FUNCTION Z_TEST_RFC.
P_TOT = P_NUM1 + P_NUM2.
ENDFUNCTION.
Do the following steps for creating ABAP program which will call the RFC in server B.
1. se38 - > creat a program.
2. write the given simple code.
data tot type i.
call function 'Z_TEST_RFC' destination 'XXXXXX'
exporting
 p_num1 = 10
 p_num2 = 15
importing
 p_tot = tot.
write tot.
please note that XXXXXX is RFC connection which is avialable in sm59 transaction in server A.
-go to sm59 - > abap connection (list of RFC connection configurations are avialable). choose server B connection and replace it of XXXXXX in the code.
finally you can execute the normal abap program that will call the RFC and display the result.
Regards,
Sukhee

How to extract data by using function module in generic extraction please

how to extract data by using function module in generic extraction please give me steps required

Dear Deba,
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
If the requirement is like extracting data from multiple tables with some complex logic then views cannot be used..so u cna go for FM is used where it can be achieved.
Chk these
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
check the following thread
generic extraction with function module
Generic Extraction with function module
Regards,
Ram.

How to find an include's function module

Similar Messages

Maybe you are looking for