How to find differene between two time fields??

Hi Experts,
I am trying to find difference between two time fields, I have created two formula variables by using replacement path for the two time fields, I have taken dimension key NUMBER, because of this time format is converting to numbers for example if the time is 13:20:10 then it is converting to 1,32,010 then it is calculating, I am getting wrong values.
Is there any options to find out the difference between two time fields.
Thanks in advance,
Venkat.

use COPF_DETERMINE_DURATION. Its better you do it in data model itself.
If you have date and time seperately use command
use CONVERT TIMESTAMP command and
then use this function module to get the difference in
timestamp
CCU_TIMESTAMP_DIFFERENCE
us this in conjunction with the below function module
DAYS_BETWEEN_TWO_DATES
Edited by: Ananda Theerthan on Jan 21, 2010 7:18 AM

Similar Messages

How to find differences between two columns

Hello I need the formula to spot differences between two columns and to write on a third one if the same name appear on the two columns.
For example:
rome berlin true
berlin moscow false
chicago toronto true
toronto chicago true
florence
Thanks
Lorenzo

You should be able to use COUNTIF where the range is th first column and the condition is the word in the second column. If the result is greater than zero then the word is in both columns.

FormCalc Formula to tell the difference between two time fields if they are populated - Help please

Hi,
I have a cell (TotalTime1) that references two other time formatted cells (Start1 and Finish 1).
The below formula is intended to tell the difference between the Start and Finish time if they are populated.
I had it working without the HasValue condition but the formula was calculating when there was no value in Start1 and Finish1 (due to time format).
This is the code I do have, it says there is an error near the last line; I am sorry if I post this in the wrong manner, I have not posted on this forum before but here goes:
if (HasValue (Finish1) and HasValue (Start1)) then if (Time2Num(Start1.formattedValue, "HH:MM") < Time2Num (Finish1.formattedValue, "HH:MM")) then Abs (Time2Num(Start1.formattedValue, "HH:MM") - Time2Num(Finish1.formattedValue, "HH:MM")) / (60 * 60 * 1000) else 24 - Abs (Time2Num(Finish1.formattedValue, "HH:MM") - Time2Num(Start1.formattedValue, "HH:MM")) / (60 * 60 * 1000) endif
Any help would be appreciated.
Regards Fetachini

Thanks whyisthisme,
Your speedy response is greatly appreciated, your support has resolved my issue.
Many thanks.
Regards
Fetachini

Extract Time from date and Time and Need XLMOD Funtion to find the Difference between Two Time.

X6 = "1/5/15 5:16 AM" & NOW ....................difference by Only Time
not date
X6 date and Time will be changing, Its not Constant
Dim myDateTime As DateTime = X6
            Dim myDate As String = myDateTime.ToString("dd/MM/yy")
            Dim myTime As String = myDateTime.ToString("hh:mm tt")
            Dim myDateTime1 As DateTime = Now
            Dim myDate1 As String = myDateTime1.ToString("dd/MM/yy")
            Dim myTime1 As String = myDateTime1.ToString("hh:mm tt")
Need to use this function to find the Difference between Two Time. due to 12:00 AM isuue
Function XLMod(a, b)
    ' This replicates the Excel MOD function
    XLMod = a - b * Int(a / b)
End Function
Output Required
dim dd = XLMod(myTime - myTime1)
Problem is myTime & myTime1 is String Need to convert them into Time, Later use XLMOD Funtion.

Induhar,
As an addendum to this, I thought I'd add this in also: If you have two valid DateTime objects you might consider using a class which I put together a few years ago
shown on a page of my website here.
To use it, just instantiate with two DateTime objects (order doesn't matter, it'll figure it out) and you'll then have access to the public properties. For this example, I'm just showing the .ToString method:
Option Strict On
Option Explicit On
Option Infer Off
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles MyBase.Load
Dim date1 As DateTime = Now
Dim date2 As DateTime = #1/1/1970 2:35:00 PM#
Dim howOld As New Age(date1, date2)
MessageBox.Show(howOld.ToString, "Age")
Stop
End Sub
End Class
I hope that helps, if not now then maybe at some point in the future. :)
Still lost in code, just at a little higher level.
Thanx frank, can use this in Future....

Function Module to find the Difference between two times.

Hi All,
Wud you plz let me know the Function Module to find the Difference between two times.
Input Time1( Hours:Minutes) Time2 ( Hours:Minutes)
Need Output in Hours:Minutes only . ( No seconds Needed )
Ex :
Input :
       06:00 to 18:00 Output : 12:00
and 20:00 to 06:00 Output: 10:00 with +ve sign only. No -ve sign.
Thanks,
N.L.Narayana

check this .
data : p_timel like sy-uzeit,
       p_timeh like sy-uzeit,
       diff like sy-uzeit,
       di(8) type c .
       p_timel = '200000'.
       p_timeh = '060000'.
       diff = p_timeh - p_timel.
       concatenate diff+0(2) ':' diff+2(2) into di.
       write:/ di.
also check for this.
       p_timel = '060000'.
       p_timeh = '180000'.
see if this can be implemented in ur code .
or else u can try with Fm L_TO_TIME_DIFF passing startdate enddate starttime endtime with UOM as MIN
hope this helps regards,
vijay

Find record count between two time stamps

Hi All,
Problem: My custom table having a datetime column ;
I want to find records processed between two time stamps.
say: records between 2010-04-28 10:15:00 and 2010-04-28 12:30:00
Could you please help me in this.
Thanks in advance
Karri

use To_date function in where column on that Dat_col
WHERE date_col BETWEEN TO_DATE ('2010-04-28 10:15:00',
'mm-dd-rrrr hh24:mi:ss')
AND TO_DATE ('2010-04-28 12:30:00',
'mm-dd-rrrr hh24:mi:ss')

How to caluclate tat between two dates of one timestamp field

Hi,
could some one help how to caluclate days between two dates of single timestamp filed and with this
query
Select * from m_activity_transaction where actn_opp_id in (
Select actn_opp_id from m_activity_transaction where ACTN_ACTV_ID = 218
Group by actn_opp_id
having count(*) > 1 ) and ACTN_ACTV_ID = 218
order by actn_performed_on
iam getting output is
ACTN_ID ACTN_OPP_ID ACTN_PERFORMED_ON
319415 95831 27-JAN-12 11.06.20.000000 AM
315249 95831 08-FEB-12 05.32.54.000000 PM
301927 103509 20-DEC-11 04.01.43.000000 PM
301458 103509 19-DEC-11 04.51.03.000000 PM
294841 115840 10-JAN-12 03.20.12.000000 PM
312062 115840 11-JAN-12 05.17.06.000000 PM
and i nedd to caluclate no.of days between two dates like 27-JAN-12 11.06.20.000000 AM and 08-FEB-12 05.32.54.000000 PM where actn_id is unique AND ACTN_OPP_ID IS NOT UNIQUE.
Thanks in Advance,
vvr.

This way?
with data as
select 315249 a, 95831 b, to_timestamp('27-JAN-12 11.06.20.000000 AM', 'DD-MON-RR HH.MI.SS.FF6 AM') dt from dual union all
select 319415, 95831, to_timestamp('08-FEB-12 05.32.54.000000 PM', 'DD-MON-RR HH.MI.SS.FF6 AM') from dual union all
select 301927, 103509 , to_timestamp('20-DEC-11 04.51.03.000000 PM', 'DD-MON-RR HH.MI.SS.FF6 AM') from dual union all
select 301458 , 103509 , to_timestamp('19-DEC-11 04.01.43.000000 PM', 'DD-MON-RR HH.MI.SS.FF6 AM') from dual union all
select 363810 , 144656 , to_timestamp('27-JUN-12 12.43.28.000000 PM', 'DD-MON-RR HH.MI.SS.FF6 AM') from dual union all
select 363500 , 144656 , to_timestamp('26-JUN-12 11.41.50.000000 AM', 'DD-MON-RR HH.MI.SS.FF6 AM') from dual union all
select 363354 , 144656 , to_timestamp('25-JUN-12 12.41.13.000000 PM', 'DD-MON-RR HH.MI.SS.FF6 AM') from dual
select a, b, diff
from (
        select a, b, extract( day from (dt - lag(dt) over (partition by b order by dt, a)) ) diff
          from data
       ) tab
where tab.diff is not null;
A                      B                      DIFF
319415                 95831                  12
301927                 103509                 1
363500                 144656                 0
363810                 144656                 1

How to pass data between two internal sessions using ABAP memory?

Hi,
How to pass data between two internal sessions using ABAP memory?
It would be fine if you could explain with an example.
And also let me clear about the data passing between two main sessions and two external sessions with specific examples.
Thanks.

Hi ,
check the example.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
In this statement, the system does not check whether the structure of the object in memory is compatible with the structure into which you are reading it. The data is transported bit by bit. If the structures are incompatible, the data in the target field may be incorrect.
PROGRAM SAPMZTS1.
DATA TEXT1(10) VALUE 'Exporting'.
DATA ITAB LIKE SBOOK OCCURS 10 WITH HEADER LINE.
DO 5 TIMES.
ITAB-BOOKID = 100 + SY-INDEX.
APPEND ITAB.
ENDDO.
EXPORT TEXT1
TEXT2 FROM 'Literal'
TO MEMORY ID 'text'.
EXPORT ITAB
TO MEMORY ID 'table'.
SUBMIT SAPMZTS2 AND RETURN.
SUBMIT SAPMZTS3.
The first part of this program is the same as the example in the section Saving Data Objects in Memory. In the example, the programs SAPMZTS1 and SAPMZTS2 are called using SUBMIT. You can create and maintain the programs called using the SUBMIT statement by double-clicking their names in the statement. For further information about the SUBMIT statement, refer to Calling Executable Programs (Reports)
Example for SAPMZTS2:
PROGRAM SAPMZTS2.
DATA: TEXT1(10),
TEXT3 LIKE TEXT1 VALUE 'Initial'.
IMPORT TEXT3 FROM MEMORY ID 'text'.
WRITE: / SY-SUBRC, TEXT3.
IMPORT TEXT2 TO TEXT1 FROM MEMORY ID 'text'.
WRITE: / SY-SUBRC, TEXT1.
Example for SAPMZTS3:
PROGRAM SAPMZTS3.
DATA JTAB LIKE SBOOK OCCURS 10 WITH HEADER LINE.
IMPORT ITAB TO JTAB FROM MEMORY ID 'table'.
LOOP AT JTAB.
WRITE / JTAB-BOOKID.
ENDLOOP.
The output is displayed on two successive screens. It looks like this:
and
The program SAPMZTS2 attempts to read a data object TEXT3 from the data cluster "text", which does not exist. TEXT3 therefore remains unchanged. The existing data object TEXT2 is placed in TEXT1. In both cases, SY-SUBRC is 0, since the cluster "text" contains data.
The program SAPMZTS3 reads the internal table ITAB from the cluster "table" into the internal table JTAB. Both tables have the same structure, namely that of the ABAP Dictionary table SBOOK.
Pls. reward if useful.....

How to find the number of times method being called.....

hi,
can any one pls tell me how to find the number of times the method being called......herez the example....
Refrence ref = new Refrence();
for(int i = 0;i < arr.length; i++){
if(somecondition){
ref.getMethod();
here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....

can any one pls tell me how to find the number of times the method being called......
herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

Working days between two date fields and Changing Factory Calendar

Hi,
I have to calculate working days between two date fields excluding the weekends and public holidays for Switzerland.
I have written the routine using factory calender and its working fine except for two problems now:
1. If any one of the date field is empty then teh rsult should be zero.
2. And the below code is working from 1996 but my cleints wants it to work for years before 1996 as well.
I also tried to change the Start date in SCAL for factory calendar but it says enter values between 1995 to 2020.
I am new to ABAP. Please help me how i can achieve these for below code.
DATA: IT_HOLIDAYS type TABLE OF ISCAL_DAY,
      IS_HOLIDAYS TYPE ISCAL_DAY.
DATA: T_DATE TYPE SY-DATUM,
      P_DATE TYPE SY-DATUM.
DATA : X_DATE(4) TYPE C.
DATA: CNT TYPE I.
REFRESH : IT_HOLIDAYS.
CLEAR : IT_HOLIDAYS.
T_DATE = SOURCE_FIELDS-/BIC/ZCCCHP812.
P_DATE = SOURCE_FIELDS-/BIC/ZCCCHP810.
CALL FUNCTION 'HOLIDAY_GET'
EXPORTING
HOLIDAY_CALENDAR = 'CH'
FACTORY_CALENDAR = 'CH'
DATE_FROM = P_DATE
DATE_TO   = T_DATE
TABLES
HOLIDAYS = IT_HOLIDAYS
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 1
HOLIDAY_CALENDAR_NOT_FOUND = 2
DATE_HAS_INVALID_FORMAT = 3
DATE_INCONSISTENCY = 4
OTHERS = 5.
DESCRIBE TABLE IT_HOLIDAYS LINES CNT.
X_DATE = T_DATE - P_DATE - CNT.
RESULT = X_DATE.
Please help
Regards
Zabina
Edited by: Syed786 on Nov 2, 2011 9:15 AM

Hi Zabina,
Try this function module 'DURATION_DETERMINE'.
Give the factory calendar and unit as DAY
With regards,
Rajesh

How to maintain Session between two ear files?

HI Guys
I have deployed two ear files in oc4j. One is used to open applet and other for business operations.
My problem is after calling applet my session gets invalidate. How to save session between two context
I am new in this field please help!!
the sooner the better
Rahul

Can I do this if I integrate oc4j with apache!!
Can I maintain session
Plz. Help
Rahul

How to use 'UNION' between two different databaseservers

Hello,
Could someone help me out. I am trying to find out if and how to use 'UNION' between two different databaseservers.
We have 2 different queries, each queries on a different database; one MySQL the other MSSQL.
Could someone tell me how to use 'UNION' between thes 2 queries?
Thanks in advance,
Samir Benalla

Hello
You may use openrowset statement, (OPENROWSET (Transact-SQL))., but before you use this, you must configure your server
sample:
SELECT a.*
FROM OPENROWSET('SQLNCLI', 'Server=Seattle1;Trusted_Connection=yes;',
     'SELECT GroupName, Name, DepartmentID
      FROM AdventureWorks2012.HumanResources.Department
      ORDER BY GroupName, Name') AS a
UNION
     SELECT GroupName, Name, DepartmentID
      FROM AdventureWorks2012.HumanResources.Department
      ORDER BY GroupName, Name
With this you can define a connection using native client to server Seattle1, and execute a query there, The results will be spooled on your server.
Connectionstring
Server=[SERVER_NAME];datasource=[YOUR DATABASE NAME];user_id=sa;password=sapassword'
if you use FQDN on your Query, than the datasource parameter in connection string can be letf out.
Regards
János.
take care of performance, it can be very slow,

How to pass parameters between two xterm windows?

Hi,
I would like to know how to pass parameters between two xterm windows where there are two independence processes running on them respectively ? Would appreciate if any one out there can advise me . Thanks.

Global variables can be used, but you can do what the online help
says ...
Parameters are passed to called forms by means of a parameter
list. A parameter list is a named programmatic construct that is
simply a list of parameter names (called keys) and their values.
You can pass parameter values to forms invoked by the built-in
subprograms CALL_FORM, OPEN_FORM, and NEW_FORM. In addition, you
can pass parameter values to other Oracle tools with the
RUN_PRODUCT procedure.
A parameter you include in a parameter list can be either a text
parameter or a data parameter. The parameter type determines how
its value is interpreted.
Text Parameters The value of a text parameter being passed to a
called product is a CHAR string that can represent the following:
n a user-defined form parameter defined in a form invoked
by the CALL_FORM, OPEN_FORM, or NEW_FORM built-in subprograms
n a command line or user-defined parameter for a product
invoked with the RUN_PRODUCT built-in subprogram
Data Parameters The value of a data parameter being passed to a
called product is always the name of a record group defined in
the current form. (A record group is a data structure that
stores records derived from a query or through programmatic
assignment.) Data parameters are used to pass data to products
invoked with the RUN_PRODUCT built-in subprogram. You cannot
pass data parameters to forms.
The following table shows the structure of a parameter list that
contains four parameters:
Key Paramtype Value
CITY Text_Parameter 'BOGOTA'
CATEGORY Text_Parameter 'EXPORTS'
MULTIPLIER Text_Parameter '.0275'
NEW_DATA Data_Parameter 'RECORD_GROUP8'
arun reddy (guest) wrote:
: im trying to do this but i could not find any way for this.
: can any one help me how can i pass parameters between two forms
: in forms4.5. any help will be appreciated
: thanks.
null

How to create Trust between two domain

How to create Trust between two domain:
please help

Hi,
By default, two-way, transitive trusts are automatically created when a new domain is added to a domain tree or forest root domain using the Active Directory Installation
Wizard. The two default trust types are defined in the following table. However there have others many types of the AD trust, please refer the following KB to determine which type you need:
Trust types
http://technet.microsoft.com/en-us/library/cc775736%28v=ws.10%29.aspx
More relate KB:
Creating Domain and Forest Trusts
http://technet.microsoft.com/en-us/library/cc740018(WS.10).aspx
The related third party article:
How to configure Forest Level Trust in Windows Server
http://blogs.interfacett.com/how-to-configure-forest-level-trust-in-windows-server
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control
these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the
use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to get relationship between two views in the reports

How to get relationship between two views in the reports, I am doing a deletion program , it is fully relates to views , how to get relationship between them in the reports

Hi,
Please explain your question in detail...what do you want to read ?
If you want to know about the navigation links between the views then you can use APIs like
wdComponentAPI.getComponentInfo().findInWindows("windowName").getViewUsageByID("Name").getNavigationLinks();
Iterate through the navigationLinkInfo from above collection and can read the other properties .
I haven't tried the above , but it should work !!!
Regards,Anilkumar

How to find differene between two time fields??

Similar Messages

Maybe you are looking for