How to find out if a user is disabled in xpress code?

I have an active sync form and I'm trying to determine as one of my checks if a user is disabled. I've tried using waveset.disabled, but that always returns null. I also tried waveset.organization to see if the user is in the 'terminate' organization, but it only always returns 'Top' and not 'Top:Terminate'
Any ideas how I can find out if a user account is disabled?
Thanks for any info!

Hi,
These two attributes you can only get in userview.
waveset.disabled (this is always null if user is not disble else return true if user is disble)
waveset.organization (will give you the whole org path like Top:xyz)
take a dump of your userview and see what you are getting there.
Use below code in you form/WF to see the userview on console
<block trace='true'>
<invoke name='toXml'>
<ref>userview</ref> // user your userview object name
</invoke>
</block>

Similar Messages

How to find out the Functional module related to a T-code

Hi All ,
Please tell how to find out the Functional module related to a T-code.
i want it for the T-code RSZDELETE.

Hi
There is no direct way to see this.
You need to Pick the Program(Se37/38) and tables (SE16/11)and to see where its been used
The FM for RSZDELETE is RSZ_DB_COMP_REORG_AS_POPUP.
Hope it helps

How to find out list of users and their access on Sharepoint

Hello Everyone
How can i find out list of users and what access they have on SharePoint site? I want to create table with list of the users and their access?
Thanks

you can get the report using below powershell scripts. first one gives list of users in a site collection level.
The second link generates the permissions reports for each user.
http://techtrainingnotes.blogspot.com/2010/12/sharepoint-powershell-script-to-list.html
https://sp2010userperm.codeplex.com/
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

How to find out list of users who have access to particulat SID

HI
How to find out the list of users who has access, to a particular SID?
Satish.

jurjen,
Thanks for replying, actually i was trying to navigate and execute the report using, SUIM...
could you help me to find out the list of users who has access to a particular system.. using SUIM.
satish.

How to find out if a user has a deferred task

In my WF, I will add a deferred task to a user. If that user already has a deferred task then i want to skip it. How do we find out if a user already has a deferred task? Thanks

This should help you
<notnull>
<ref>view.accounts[Lighthouse].properties.tasks[taskname]</ref>
</notnull>

How to find out if a user is logged into a windows XP or VISTA machine

Hi,
Could somebody please tell me how to find out remotely over a LAN, whether a user is logged into a computer that is running windows XP/VISTA or not? How can this be programmatically done if we know the name of the remote machine?
Thanks.
Ravisara

Hi,
Thanks for all the replies.
Actually it seems that my question has either been misunderstood or has been badly phrased by me.
What I want to know precisely is the way to find out if a user is logged into a machine or not. Say for example in a LAN there are three computers called A, B and C. If my Java program is running on machine C, how can the program check whether a user is logged into machine A? Assuming JRE is present in all three machines, the machines have as their OS windows XP or VISTA and all machines are connected to a windows domain(Windows 2003 server based network)
The idea here is to identify all the computers in a network that users are not logged into and then to remotely shutdown those computers in order to minimize wastage of electricity(preferably after a particular time of the day in an organization).
Any replies would be much appreciated.
Kind regards,
Ravisara

How to find out what computers user logged on? (not at the moment but history)

Domain Controller: Windows 2012 R2 - Unfortunately, I don't manage DC but my own OU (computers and users)
I have a user working mid-night shift reporting that he received error message "The group policy client service fail the logon, access denied". He is using multiple PC and he did not remember which PC gave him the error message. How do I find out
which computers he logged on? I have access to my domain OU. I can manage my own Computers and Users objects in my domain (no domain controller in my department)
I searched internet but most of them are finding out which computer user is currently logging on - not the history, thanks.
Thang Mo

To fix this error, please follow the steps given below and check if it helps you to resolve the issue :
1. Logon to the machine with a machine administrator account (assuming this issue is with a domain account, if not logon to the machine using another account with administrative privilege).
2. Move the machine to a work-group from domain. (If it was part of one work-group then change it to another one or join a domain.) You could do this through Control Panel\System and Security\System and then Change Settings.
3. Restart the machine and logon with a machine administrator account.
4. Delete your user profile data (or move it a different location) completely from c:\users. "C" in my case is system directory but if you have a different one then use that one.
5. Join the machine back to domain account (or to work-group that the machine was originally joined to), and restart the machine.
6. Logon with your domain account that you were having trouble with. Keep fingers crossed.
If all goes well, you should be logged on.
Coming to the second query, if the user are in DC, you can try our free tool
Lepide last logon reporter that will help you to get the logon details by specifying Domain Name/IP of the Domain Controller, User Name, Common Name and Last Logon Time.
Lepide - Simplifying IT Management

How to find out all the tables associated with particular T-code or Program

Hi All,
In 4.6B we have a transaction code SE49, where we can see all the tables associated with particular Transaction code or Program.
But in ECC 5.0 or in ECC 6.0 this transaction code is not available.So is there any alternative where i can find out all the tables associated with particular T-code or Program.
Thanks
Shubham

Hi,
you are right, Transaction SE49 as well as SE48 do not exist anymore I'm afraid, they
are discontinued.
You might try to create a transaction variant:
1) Start SE93 to create a transaction variant
2) Specify a name, eg. ZSE49, and choose the first option:
   "program and screen (dialog transaction)
3) Here specify SAPMSEUZ as program, and 200 as screen number
4) Choose a suitable development class (package) if you want it to be
   transportable or Local (=$TMP) if non-transportable
5) press Save
Same applies for SE48, same program but dynpro 100.
Sorry for not being able the reasons behind the decision to discontinue
these transactions. I suppose at least part of the functionality was
integrated in SE38.
Best regards
Erika

How to find out the 'z' user exit used in a Particular Transaction

Hi,
I have requirement to analyse all the user exits used in a transaction say 'VA01' . How can i find the user exits in a VA01 transaction. Can anyone suggest how to find the User exits
Thanks in Anticipation.
With Best Regards
mamatha

you can execute the following program , give the transaction name and execute
*& Report YCHATEST                                                    *
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

How to find out the report users.

Hi,
Is there any way to find out the users names(or OS Users) who are using a report from last 12 months from Oracle Database, Report Version is 10g.
Thanks for your early response.
Thanks
Amit.
Edited by: user535789 on Mar 7, 2010 7:02 PM
Edited by: user535789 on Mar 8, 2010 12:21 AM
Edited by: user535789 on Mar 8, 2010 7:01 PM

Hi, if you're using oracle apps, you might look at fnd_conc_requests_form_v but it may have been purged.

How to find out where used list of Table or T-code

Dear ABAP gurus
I know many of you have done this several times.
wish to find out which Transaction code INSERTs the data into the table IHPA.
I did the where used list - SE11 ( for specific key work called INSERT ).
Used the Table called D010TAB which has some information.
Vise versa if I know a T-CODE , how to know which tables it read & Modify...
any better procedure than spending hours in research...
I found similar custom program to find USER EXITS ...here..., looking soething similar...
[http://wiki.sdn.sap.com/wiki/display/Snippets/FindUser-exits%2CBADIs%2CBTEs%2CEtcbyTCodeorProgram]
thank you for your help
Edited by: Raj Anvesh on Aug 3, 2011 9:58 PM

Hi Anvesh,
Maybe the data INSERTION is happening by BAPI,
So just try to look for the concerned BAPIS.
ECP_SRV_PARTNERS_IHPA
IREP1_IHPA_ADRNR_PRE_FETCH
IREP1_IHPA_ADRNR_READ
MAP2E_DIIHPA_TO_PARTNER
MAP2E_IHPAVB_BAPI2080_NOTPARTE
MAP2E_IHPAVB_TO_BAPI_IHPA
MAP2E_IHPA_BAPI2080_NOTPARTNRI
MAP2E_IHPA_M_BAPI2080_NOTPNRI
MAP2I_BAPI2080_NOTPARTNRI_IHPA
MAP2I_BAPI_IHPA_TO_IHPA
PM_DB_FILL_DIIHPA
PM_PARTNERCOPY_FILL_XIHPA
PM_PARTNER_DELETE_XIHPA
PM_PARTNER_GET_XIHPA
PM_PARTNER_PUT_XIHPA
PM_PARTNER_REFRESH_XIHPA
these are the bapis which are dealing with the IHPA table,
Segregate them as needed and then go to the std program
Revert for further clarification.
Thanks
Sri

How to find out where a table is used in the code ?

I have a huge database, and I am adding a column to a table...
is there a query to find out if this would impact the code ? I mean I want to find all the places in the code with
insert into mytable, or update mytable.....
how to include both insert into mytable, and update mytable in dba_source ?

Use DBA_DEPENDENCIES:
select owner,name,type from dba_dependencies where referenced_name = 'TABLE_NAME'
and referenced_owner = 'TABLE_OWNER';For example:
SQL> select owner,name,type from dba_dependencies where referenced_name = 'EMP'
2 and referenced_owner = 'SCOTT';
OWNER                          NAME                           TYPE
PUBLIC                         TABLE1                         SYNONYM
SCOTT                          SELECT_EMP                     PROCEDURE
SCOTT                          EMP_DEPT_VW                    VIEW
SCOTT                          PP                             SYNONYM
SCOTT                          EMP_MV                         MATERIALIZED VIEW
SCOTT                          EMP_VIEW                       VIEW
6 rows selected.
SQL> However, keep in mind DBA_DEPENDENCIES stores statis references only. If your code references table in question in dynamic SQL you will have to parse DBA_SOURCE and in some cases, even that will not give you all answers.
SY.

How to find out if a user has no more resource accounts?

I want to check to see if a user has no more resource accounts tied to it. The only resource account left is Lighthouse and nothing else.
Do you know how I do this?
Thanks

I was able to find disabled users using the below code. Does anyone know how I can find users who have only Lighthouse account and nothing else? I want to add this to the search criteria.
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='queryObjectNames'/>
<Argument name='type' value='User'/>
<Argument name='single' value='false'/>
<Argument name='attributes'>
<map>
<s>lhdis</s>
<s>true</s>
</map>
</Argument>
</Action>

How to find out number of users in an organization?

Can you show me how I can find the total number of users in an organization please? Paging through is not an optimal way since there are alot of users.

DamonL wrote:
(be careful if you have a lot though!)That's an understatement. :) If you have a LOT of users in your organization doing a search on the organization just to find the user count will bog down the IDM server for several minutes.

How to find out date when user clicks on a date of Date Navigator

Hi Experts,
I have created WD application. It contains DateNavigator. User clicks on a particular date. We want to display the clicked date. How we can do so? I have done following coding. What I should type after "hi" + ????? to display the selected date.
public void onActionSelectDate(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionSelectDate(ServerEvent)
    wdComponentAPI.getMessageManager().reportSuccess("hi ");
    //@@end
Regards,
Gary

HI Gary,
You can do this by binding the context attribute of type date to the firstSelectedDate property of the datenavigator Ui element.
then suppose context attribute to which you have bound the UI element has the name date then create an action for the event onDaySelect. then write the following code in the event handler
public void onActionselectdate(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionselectdate(ServerEvent)
    String str = wdContext.currentContextElement().getDate().toString();
    wdComponentAPI.getMessageManager().reportSuccess("HI" + str);
    //@@end
It will solve your issue.
But the date format here will be YYYY-MM-DD if you want to change it then either you have to use one simple type or modify it in the code itself by using some string operation.
Regards,
Sarbjeet

How to find out if a user is disabled in xpress code?

Similar Messages

Maybe you are looking for