QP01 - Signification of Usage , Status and CAPP Order

In QP01 what does (A.) USAGE , (B.) SATUS & (C.) CAPP STATUS signify.
Usage                                   Description
1.     Production
2.     Engineering/Design
3.     Universal
4.     Plant Maintenance
5.     Goods Receipt
6.     Goods Issue
9.     Material Check
51.     Goods Receipt Model
53.                                      GR External Process
What does these numbers depict & what are their functions ?
Where are they used , as I am only using ,USAGE (5) while creating Inspection Plan.
STATUS                                   Description
1.     Created
2.     Released For Order
3.     Released For Costing
4.     Released (general)
What does these numbers depict & what are their functions ?
Where are they used , as I am only using , STATUS (4) while creating Inspection Plan.
CAPP ORDER                                               DESCRIPTION
1.     Planned Order
2.     Production Order
3.     Recalculation
9.     Always
What does these numbers depict & what are their functions ?
Where are they used , as I have not used it so far in the creation of Inspection Plan.

Hi,
In brief I can tell u that this capp order is used for std vale calculation for particular operation in routing say u have one operation machining performing on lathe machine which has machine time and labor time & others time.
Recalculate standard values at order creation using CAPP
    Key indicating that, at the time of order creation, standard values are
    recalculated using CAPP depending on their order category.
System takes the std value by default from your work centre defined in the routing ( check any pp routing, it will be more clear for you )
For Ex
You have selected production order in the inspection plan ( It is applicable only where you want to capture the cost of inspection) in QM scenario. If you want to change the qty in production order it help you to recalculate the std value for an operation.
    o   and this key is maintained, the standard values are calculated at
        the time of order creation.
    o   and this key is not maintained, the standard values already
        calculated are copied into the order from work center details
   This is more relevant to PP.
Thanks & Regards
Kundan Kumar

Similar Messages

VKM1 Status and Purchase Order Fields

Hi Everyone,
I'm new with SD and not familiar with transaction VKM1. I have a task that needs to get the corresponding Status field and Purchase Order field for a corresponding VBELN. To what table can I map these data?
Please help.
Many Thanks!

Hi
Kindly use the belwo tables and fields
VBAK--BSTKD --POurchase order
VBUP-GBSTAOverall processing status of the SD document item
Regards
Damu

Soft errors/warnings are creating idocs in 51 status, and creating orders

In our SAP 4.7 environment, inbound orders that encounter credit checks, materials in the wrong status, blocked customers, and several other issues that should just be warnings or messages rather than resulting in status 51 idocs, are hitting 51 error status, and they are creating orders in SAP as well (51 status idocs are still creating orders, and nuisance messages are creating 51 status idocs, and still creating orders). I assume someone made some programming changes years ago to cause this to happen. This is really polluting workflow and BD87, and customer service is duplicating orders as they process 51 status idocs through workflow, unaware that orders already created immediately regardless of the 51 status.
Can anyone point me in the direction of where I can specify what warnings or errors constitute 51 status, and where I can stop 51 status idocs from creating orders until the error is repaired?
Would it be in program RBDAPP01, or the inbound function module EDI_DATA_INCOMING?
Any help would be appreciated. Thanks!

Hi Kevin,
so then it is time to check it out in WE19 debug mode. After each PERFORM in the EDIDC Loop in the FM IDOC_INPUT_ORDERS, check the control and status data, this will lead you to the point where the unexpected and/or unwanted behavior appears.
In the LOOP AT IDOC_CONTRL, in our system line 183 you find the comment fill IDOC Status. Check if field OK is not cleared here. If OK is set although you should have errors, then it's already too late.
But please double-check EXIT_SAPL_VEDA_004 if it changes the tables parameter didoc_status = idoc_status.
What I did not mention yet as I think you are talking only about IDoc not about online processing, applies to both:
Customizing SPRO, SAP Reference IMG, Sales and Distribution -> Sales -> Sales Documents -> Define variable messages:
Here you may have entries for application area V4, Sales messages (variable messages and EDI messages). Check if you find suspicious messages set to 'W' here.
If this is the case and table logging is switched on as it should be, you can use menu uitilities -> change logs to find out who changed what when.
Good luck!
Regards
Clemens

BOM Usage and Sales order BOM

Can some one bring our the difference between BOM usage in the creation of a material bom and a Sales order BOM - To be more specific, when you are creating a BOM using the tcode cs01, I get a field called BOM usage where I can select it as 5 and define it as relevant to Sales and Distribution. I can also create a BOM which is Sales order specific using CS61 tcode. what is the difference between the two? When will the bom created using CS61 explode and when will the other one explode?
Thanks for your reply in advance....

Hi
while using the material in each dept. the usage differs so for that sap provided this function. for sales bom is used only sales and also that material already exist in the plant. and mm bom the material has to procure from the some third party that all functionality will control throgh the maitaning bom usage.
further your explanation i give below info.
Text
BOM Usage
Definition
This key defines the area (such as engineering/design or production) where a BOM can be used.
Use
By setting various indicators, you can define the maximum configuration of the item status and define whether an item must be or cannot be processed in a particular area (such as production).
Examples
A material is used in the areas production and costing in a company. For each area, you maintain a separate BOM with different items:
Production BOM:
This BOM contains items that are relevant to production. These items are copied to the planned order. Dependent requirements are generated for them, and they are copied to the production order.
Costing BOM:
This BOM contains items that are relevant to determining the material costs of a product.
When you calculate production costs using a quantity structure, the system automatically determines the BOM and all the BOM items that are relevant to costing, in order to calculate manufacturing costs.
pls find the config table which will give u clear picture about bom usage.
STLAN     PMPFE     PMPKO     PMPKA     PMPRV     PMPVS     PMPIN     PMPER     ANTXT
1     +     .     .     -     -     -     .     Production
2     .     +     .     -     -     -     .     Engineering/Design
3     .     .     .     .     -     -     .     Universal
4     -     -     .     -     -     +     .     Plant Maintenance
5     .     .     +     +     -     -     .     Sales and Distribution
6     .     .     +     .     -     -     .     Costing
7     .     -     .     .     -     -     -     Empties
8     -     .     -     -     -     -     -     Stability Study
M     .     .     .     .     -     .     .     External Munitions Display
Z     +     .     +     +     -     -     .     Rebranding Sales BOM (1:1)
Thanks
Regards
Hari Shankar

How to get system status and user status of service order

Hi,
I want to show user status and system status for service order in my report and i am using CRM_ORDER_READ function module to read the status, but it is returning lot of status records, could anyone please suggest how to get the system status and user status for service order.
I did not find any clue for how to get user status, i can see the user status when i open the transaction using CRMD_ORDER.
Regards,
Kamesh Bathla

Hi,
Go to CRM_JEST table give your service order guid and get the status, pass this status into TJ02. You will get the status of your order.
Regards
Srinu

Report on production order status and shortage report

I want to know standard report on production order status and shortage report. Kindly suggest.

COOIS - Production order information system . In this report you can give system status in selection screen and in report you can get complete status details (both system and user status) .
shortage report - CO24

Status of sales order and delivery notes

Hello,
what is the status of sales orders that permit to create delivery notes for this sales orders.
And what is the status that block us to create delivery Notes.
Regards.
Zied.

Hi..
1. The over all status of the sales order in header shuld be Being processed...Rejection status shud be nothing rejected..Delivery status shuld be Not delivered....Credit status shuld be Approved/released
2. Status will be Blocked if any block is assing to the sales order or else it wud be Not blocked
Reg,
JJ
Edited by: Jagsap on Nov 25, 2009 11:03 AM

I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days?

I ordered the full creative cloud on sunday and received an order number but still can't open any of the programs. When i check the status of my order online, it says it can't find it. Is this normal after 3 days? I tried asking in a chat window instead of the forum but no one answered and after about ten minutes my screen restarted and closed the chat window down. It seems a little frustrating not knowing what happened to my order and not being able to contact anyone. Is all this usual with Adobe or are they just having technical problems this week?

Does your Cloud subscription show on your account page?
https://www.adobe.com/account.html for subscriptions on your Adobe page
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Order and item status in sales order

We had multiple items in the sales order
for one of the item, the quantity was 5, but user cretaed a delivery of 8. but she only post goods issue for 5.
the delivery and order was open
at this stage the archival of delivery took place.
we changed the status in tables vbuk and vbup to complete.
but in the display of status in sales order, it still shows being processed.
What can we do now to set the order status and item status to COMPLETE.
Thank you for your reply

Hi,
This order status will not be complete unless the delivered quantity is equal to the order quantity. You have 2 options. 1. Change the order quantity to 8 and delliver the rest 3 and the order status will be set to COMPLETE. 2. Otherwise, reverse the PGI in VL09n and delete the delivery and create the delivery again for 5 qty. This will set the order status as COMPLETE.
Regards,
Raghav

Fetching the sales order data using both system status and user status

Hi,
Could any one tell me how to fetch sales orders using both system status and user status.
My requirement is to fetch sales order data in a report where the user enters the system status and user status in the selection screen fields.
For example i need sales orders where the system status is I1002 i.e. OPEN and user status is E0002 (status profile CMSCON0) that is In Process
Early replies are appreciated.
Thanks
Tanveer

Hi,
The system status and user status are stored in CRM_JCDS & CRM_JEST tables you can get the all the order GUID on particular status further pass the order GUID in table CRMD_ORDERADM_H to get transaction ID.
Regards,
Dipesh.

Dates for setting DLV and TECO status in production orders

Hi,
I am trying to understand where SAP is holding information on the date of change of status of Proces (or Production) order to TECO or DLV. I think that this information must be held somewhere as based this date is being used to calculate variance for production orders in KKS2 or KKS1 transaction.
Thank you,
Karol

Hi
1. In your Production Order - there is a Line in the 1st screen where you would see a series of Status Like REL DLV TECO SETC, etc
2. you would see a i against the Statuses.. Click it
3. You would see a tab called STATUS, where in all the Statuses are listed
4. Click any of the desired status and then choose MENU Extras > Change docs > For Status
Br, Ajay M

Colective Settlement and "CLSD"Status for Production and Maintenance Orders

Hi dear experts,
Is that possible to use transaction KO8G for collective settlement of Production Orders? Apparently it only works for Maintenance Orders.
The same applies for transaction CO99 for getting "Closed" status in Orders. Apparently it does not take the Production Orders, even if the selection "With CO Production Orders" is active. Is there any additional configuration we should do?!
We would like to do settlement (and mass set "Close" status after) for Production and Maintenance Orders at the same time.
Thanks in advance,
Lígia Moreira

Hi,
You can use CO88 for settlement of production orders. Normally, CO99 should take production orders if the flag is switched. Do you receive any error when you do it?
Regards,
Eli

User status for Notification and Work order

We generate Service Notification IW26. I have already configured user status like PMND (Planning order not done), AWOP (Awaiting ordered parts) etc. in the Work order a while ago. Now the user wants same User status to the Notification as well. I like to know from experts what is the value added to have the same user status for both Notification and Work Order?
Do you have any suggestions?

Hey Chandra,
The customer intent behind this requirement must be to check in reporting / List Display Transaction about the Order Status. If they want to know looking at a Pending Notification List about the Order Status, you can always provide similar report using SAP Query Builder or with help of your Developer.
Apart from that If the Requirement is to have these User Statuses in Notification itself, Please advice them that it will be extra activity while performing transaction.
I dont see any other benefit of having User Statuses added to Notification as well.
Do let me know if you have some more info on Why Customer is requesting this....
Regards,
Avi

How to return order status and the status of the next order

Greetings,
I cannot use the LEAD function.
How do i simulate this in Oracle 8i PE.
I have a table of orders and for each grouping of orders i need the current status and the next status.
Any suggestions?
Thanks,
Craig.

Something like:
SELECT i.order_id, i.item, i.status
MAX(i2.status) next_status
FROM incidents i, incidents i2
WHERE i.order_id = i2.order_id(+)
AND i.order_id < i2.order+id (+)
GROUP BY i.order_id, i.item, i.status
ORDER BY i.order_id
Greetings,
I cannot use the LEAD function.
How do i simulate this in Oracle 8i PE.
I have a table of orders and for each grouping of orders i need the current status and the next status.
Any suggestions?
Thanks,
Craig.

How to fetch service order with partucular system status and user status

Hello All,
How to fetch service orders with specific system status and user status.
thanks

I want tables or views from where I can fetch service orders. I have to design ALV report based on this.
I want to fetch released service orders with status INIT and RENT.
Here, SYSTEM Status = Released and
USER Status = INIT
RENT
So is there any function module available for the same.....

QP01 - Signification of Usage , Status and CAPP Order

Similar Messages

Maybe you are looking for